x2go-user

x2go-user@lists.x2go.org

1 participants
2319 discussions

Re: [X2go-User] [X2go-Dev] Debian packages + Git temporarily unavailable
by Mike Gabriel 21 Sep '11

21 Sep '11

Hi all, the DNS issue is settled, the new DNS settings for the x2go.org domain are now correct again. On Mi 21 Sep 2011 11:46:53 CEST Mike Gabriel wrote: > Hi all, > > we have a DNS provider transfer running and unfortunately, we made a > mistake for the hosts code.x2go.org, git.x2go.org and > packages.x2go.org. > > The Debian package repository and the Git site of X2go are > temporarily unavailable due to DNS transfer problems. Depending on > your location on the web this problem will last for at max. 48-72h. > > We apologize for the inconvenience, > Mike (and Heinz) Unfortunately, the DNS server updates/syncs across the internet will probably take a while in case any DNS server in your proximity got notice of our faulty config. Please be patient, the sites will be available for you again soon (a matter of some hours)!!! Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

Debian packages + Git temporarily unavailable
by Mike Gabriel 21 Sep '11

21 Sep '11

Hi all, we have a DNS provider transfer running and unfortunately, we made a mistake for the hosts code.x2go.org, git.x2go.org and packages.x2go.org. The Debian package repository and the Git site of X2go are temporarily unavailable due to DNS transfer problems. Depending on your location on the web this problem will last for at max. 48-72h. We apologize for the inconvenience, Mike (and Heinz) -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

Question about Pyhoca-gui
by Paul van der Vlis 20 Sep '11

20 Sep '11

Hello, To use Pyhoca-GUI you need 4 steps: - start Pyhoca-GUI, what only adds an icon - find and open the icon - connect to a server - start a session to that server I think for many normal people this is "complex". They would like 2 steps: - start the program, so that it's visable and not only an icon - start a connection and session to a server I am afraid this is not possible with Pyhoca GUI. Correct? What's the advantage to have a separate connection and session? With regards, Paul. -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl

3 2

x2goclient does not connect, Pyhoca-GUI does.
by Paul van der Vlis 20 Sep '11

20 Sep '11

Hello, Strange problem. I connect with x2goclient to a customer, it says after a very short time: "Access denied. Authentication that can continue: publickey,keyboard-interactive". When I connect using SSH with the same username and pasword and as the same user, there is no problem to connect. I've also tried Pyhoca-GUI. That worked without problems too. Can somebody explain me what's the underlaying difference? Maybe some different library is used for DNS or something like that? When I try it with x2goclient using a wrong password, there is nothing in the /var/log/auth.log on the not-working-host. When I connect to another customer with x2goclient, there is no problem. When I use a wrong password there, it is logged in /var/log/auth.log. With regards, Paul -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl

1 0

Is http://x2go.obviously-nice.de/deb/ down?
by Jian Ren 16 Sep '11

16 Sep '11

I always got 404 : *Error 404 - Not found* The document you requested is not found.

2 1

pyhoca-gui, x2goclient compatibility bugfix released
by Mike Gabriel 14 Sep '11

14 Sep '11

Hi all, today I have discovered and fixed a bug in pyhoca-gui that caused session profile problems in x2goclient after pyhoca-gui had been started on the same system for the same user (on Linux, both use the same config file: ~/.x2goclient/sessions). The symptoms were: o start pyhoca-gui o edit a session profile, change it from some desktop command to a non-desktop command o switch it back to a desktop command again o in pyhoca-gui you won't realize a problem o but: if you use this session profile in x2goclient, a desktop session will start in non-desktop mode: many individual windows are opened for the different desktop applications and applets I have just uploaded pyhoca-gui 0.1.0.8, which fixes this compatibility problem. The new pyhoca-gui version will also repair session profiles: edit a broken profile and save it again (from within pyhoca-gui). The session profile should be usable in x2goclient again, then. Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

SOLVED X Connection Refused problem
by John A. Sullivan III 07 Sep '11

07 Sep '11

Hello, all. We've seen a couple of postings in the past where users just could not connect and would get session errors about the X connection failing with a 111 Connection Refused and a message about channels with certain file descriptors and IDs not being closed. We've hit this in the past and have never gotten around it reliably. Any success seemed to be purely random luck. Today, we cracked one definitively. The problem was a mangled /tmp/.X11-unix directory. It is very specific to our environment but it may jog someone else's mind to find what the ultimate underlying issue is. We have been working on creating portable, encrypted boot sticks to boot a lightweight Linux desktop to connect to our X2Go systems as a way of getting around the poor performance of the Windows X2Go client as well as provide extra security, lower end user support requirements, further separation between the data center based "Content Network" and the unmanaged end devices, and portability between physical computers. All the testing and builds were done with the same very old laptop with Debian Squeeze. The only differences was one boot stick was built by installing Debian from the netinstall CD and used LXDE and the other was built with debootstrap and used Xfce. In both cases, we had a script named settmp to move the /tmp directory into RAM if there was sufficient RAM in the machine. It did this by copying anything already in /tmp to a scratch directory, deleting everything in /tmp, remounting /tmp as a tmpfs, copying everything back in, and then erasing the contents of the scratch directory. File transfers were done with rsync to ensure easier and safer handling of hidden files (no rm -Rf /tmp/.* - which deletes /tmp/.. ! - thankfully did not learn that the hard way). The LXDE system ran x2goclient perfectly well but the Xfce system almost never connected. Suspecting it was an SSH problem because of the channel error messages, I tried doing an ssh -X to the x2goserver and running xterm. It complained about a connection refused and pointed to .X11-unix which I remembered was in /tmp. I wondered if the moving and then moving back was mangling it. I then restarted X on the same system now that /tmp was already moved and x2goclient worked perfectly. I then rewrote the script as a real init script and used insserv to place it before x11-common. After several reboots, it has worked flawlessly. x2goclient connects all the time. In retrospect, I had comment out the settmp script on the LXDE station while troubleshooting something else and had forgotten about it! So, we successfully solved the dreaded X connection refused problem in our environment. Hopefully that will help the others who have been burned by it - John

1 0

x2goserver on SLES11
by uhaller＠kabelbw.de 06 Sep '11

06 Sep '11

Hi, I found your posts within the x2go wiki, thank you very much for providing the instructions for manual install from source tarballs. I would also like to switch from freenx to x2go, therefore I want to install the x2goserver on an SLES11 installation. I followed the instructions and completed setting up x2goserver on SLES11. Now I'm trying to connect to x2goserver via an x2goclient (X2Go Client V. 3.99.0.0 (Qt - 4.7.2)) on Ubuntu 11.04. When starting the session I'm getting following problem: "Authentication failed" - "Access denied. Authentication that can continue: publickey,keyboard-interactive" I'm able to connect via ssh. Do you have any ideas what might be wrong? It is possible to get more detailed information via special trace settings? Thanks in advance, Uwe.

1 0

Re: [X2go-User] Problems setting print system in x2go [Resolved]
by Mike Gabriel 01 Sep '11

01 Sep '11

Hi devs, On Mi 31 Aug 2011 18:06:39 CEST Mario OROZ wrote: > Ok, let me explain. > /usr/bin/margen-offset.ps > It is a postscript that I created to fix a little problem that appears when I > try to print the > pdf on a laser printer hp, where the text in the pdf document starts from the > left edge to > right edge, regardless margins!. > When the PDF page exits the printer the text is cut by a margin > around the text, > is the unprintable area of the printer, I think! > So when you add the margin-offcet.ps file in the conversion command > line, gs merge > it with the ps print jobs and ensures a margin or bleed in the pdf doc. > > content of /usr/bin/margen-offset.ps is: > <</.HWMargins [18 18 18 13] /Margins [-75 0]>> setpagedevice > <</PageOffset [18 -9]>> setpagedevice > > I think the first line does not help much. > > The information come from this page: > http://www.bobdbob.com/~deneb/doc/ghostscript_margins.html > http://www.humbug.in/stackoverflow/es/como-para-cambiar-pagina-de-pdf-que-u… > (can be read in English) > > Saludos! > Mario. On the x2go-user ML there is a discussion going on about margins and X2go printing. Do we want to look at that more closely??? Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

Problems setting print system in x2go
by Mario OROZ 01 Sep '11

01 Sep '11

Hello, I'm new to the list. I use a server x2go on a Debian 6.0 with Windows XP clients. I do not understand how to set the printing to print on printers on the client side. I installed cups-x2go, and created a printer with cups cups-driver that provides x2go. I installed cups-x2go, and created a printer using the driver that provides cups-x2go. On the client windows, menu Option / Settings / Printing tab is checked the "Show this dialog Before start printing" Can anyone tell me of some howto or explain how to configure the local client printing from the server windows x2go Already, thanks

3 14

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user