x2go-dev

x2go-dev@lists.x2go.org

5397 discussions

X2go and Windows Client
by --[ UxBoD ]-- 06 Dec '10

06 Dec '10

Hi, I can successfully compile the latest version of X2go fine; though when I copied the resultant .exe to another workstation and attempted to run it I received an error that Qtcore4.dll could not be found :( I believe this is due to Qt not being statically built ? And if that is the case any help of doing that would be appreciated please ? I am surprised though as from what I have read the x2go source would need changing to support static linking ? -- Thanks, Phil

2 4

x2go thinclient under Debian Lenny problem with sound
by Markus Homburg 04 Dec '10

04 Dec '10

Hello NG, I have some problems to redirect the sound with arts under Debian Lenny. So what I did was to install die x2goserver-one and the thinclient (PXE,NFS,etc...) and it works so far. That means I can connect to the server and change the windowmanager and the resolution and so on. But there is no sound on the client! When I play a song it will be played on the server not on the client. Which are the correct settings for arts on KDE: Enable networked sound? Select the audio device: Autodetect? Is there a special file to edit? best Markus

4 12

Fwd: Re: X2Goclient
by kamerun＠immerda.ch 26 Nov '10

26 Nov '10

hello, i am back in cameroon and i have to install x2go network with PXE and 10 thin clients. the machine is ubuntu 10.04 and i install x2go home question 1 the installation was going well, but the PXE clients does not start properly. i see that in the file /opt/x2gothinclient/etc/network/run is empty i had the same problem few months before i have done the same correction (see below) and it works i send again the mail and hope this failure will be corrected 2. question to install x2go, because of the slow connection we need here a whole day and we were lucky we had no current problem during this day. for me it would be the best when i make a x2go repository on a usb hard disk and play it from there. somebody know howto do it? warm greetings michel -------- Original Message -------- Subject: Re: [X2go-dev] X2Goclient Date: Sat, 11 Sep 2010 18:36:45 +0200 From: kamerun(a)immerda.ch <kamerun(a)immerda.ch> To: x2go-dev(a)lists.berlios.de, "kamerun(a)immerda.ch" <kamerun(a)immerda.ch> hello, i install x2go server on xen machine http://www.x2go.org/fileadmin/doc/installation_x2go_debian_en.html#3.Instal… pxe come to login but after login he cannot start it says that he cannot connect localhost when i go to console client i cannot ping localhost lo is there but not up i suppose the link in run by client is not done i correct like this and it works, but i suppose it is a mistake or not? x2gonoldapone:~/scripts-noldap-0ne# cd /opt/x2gothinclient/etc/network/ x2gonoldapone:/opt/x2gothinclient/etc/network# ls if-down.d if-post-down.d if-pre-up.d if-up.d interfaces run x2gonoldapone:/opt/x2gothinclient/etc/network# ls run x2gonoldapone:/opt/x2gothinclient/etc/network# ls -l total 24 drwxr-xr-x 2 root root 4096 May 5 2008 if-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-post-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-pre-up.d drwxr-xr-x 2 root root 4096 Sep 11 08:33 if-up.d -rw-r--r-- 1 root root 30 Sep 11 08:21 interfaces drwxr-xr-x 2 root root 4096 Sep 11 08:21 run x2gonoldapone:/opt/x2gothinclient/etc/network# rm -r run x2gonoldapone:/opt/x2gothinclient/etc/network# ln -s /dev/shm run x2gonoldapone:/opt/x2gothinclient/etc/network# ls -l total 20 drwxr-xr-x 2 root root 4096 May 5 2008 if-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-post-down.d drwxr-xr-x 2 root root 4096 May 5 2008 if-pre-up.d drwxr-xr-x 2 root root 4096 Sep 11 08:33 if-up.d -rw-r--r-- 1 root root 30 Sep 11 08:21 interfaces lrwxrwxrwx 1 root root 8 Sep 11 08:54 run -> /dev/shm x2gonoldapone:/opt/x2gothinclient/etc/network# michel

3 2

Python X2Go client GTK?
by Jo-Erlend Schinstad 23 Nov '10

23 Nov '10

I was wondering about that Python X2Go client, if there is a control that can be used to embed the client window (desktop) into a GTK application? If it could be done using PyGTK, then that would be pure heaven. :) Jo-Erlend

2 1

Installing x2goserver-one in Debian added 300 users to fuse and x2gousers groups
by Nikos Chantziaras 21 Nov '10

21 Nov '10

I followed the instructions in the Wiki and installed x2goserver-one on my Debian Lenny server. However, during the installation, it told me: Attention: If you want to allow users to log into the x2go system, you'll need to add them to the "x2gousers" group but then it went on all on its own and added all users (about 300) of the system to the "x2gousers" as well as "fuse" groups! How do I undo that? Right now, I need to click around for hours in the Users and Groups admin tool :-$

5 14

Compiling x2go Windows client
by --[ UxBoD ]-- 21 Nov '10

21 Nov '10

Hi, I am attempting to compile the win client and have installed the QT SDK, MinGw and the x2goclient sources. They have been added to the environment path to allow the compilation binaries to be found. The readme says that one should rename x2goclient.pro with x2goclient.pro.windows yet the latter file does not exist? I decided to press on and ran qmake followed by make which completed without any errors. I found the x2goclient.exe within the debug directory and once I ran it the normal client screen popped up but was immediately followed by the error "Runtime Error!" from the Microsoft Visual C++ Runtime Library. Would very much appreciate some help in resolving the problem please. -- Thanks, Phil

2 1

Python X2go: nxproxy problem with multiple sessions to different servers
by Mike Gabriel 21 Nov '10

21 Nov '10

Hi Alex, hi Heinz, i have a problem that occured when coding Python X2go... I have two servers. None of them has any X2go users connect to them. When I connect to server 1 it offers SSH display tunnel NX-Proxy port 30001. When I connect to server 2 it also offers SSH display tunnel NX-Proxy port 30001. However, I cannot start two nxproxy instances listening on the same SSH tunnel port. Is there a communication protocol in X2go that gives the server feedback if an offered port is already in use locally on the client? It actually is not only a graphics/nxproxy issue, it will also occur when tunneling sound or sshfs (only that I do not get that far without a tunnel for nx traffic). Any help is appreciated... Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 mail: m.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 2

Problems with Mac, Windows and Maemo clients
by Robin Green 21 Nov '10

21 Nov '10

My wife borrowed my laptop last night, so I decided to try and see if I could get any of the other X2Go clients to work, as I'd been having display corruption problems (see previous emails - might actually be a display driver issue, not an X2Go issue). 1. Maemo: Couldn't install it on my N900, because it hadn't been rebuilt or reimplemented for Maemo 5, so that was a non-starter. 2. Windows XP: A dialog box popped up saying "Could not start the X server". Xming was installed. When I ran Xming myself, x2goclient just hung when I tried to connect. Well, didn't do anything anyway. Every time. 3. Mac OS X 10.5.8, using the latest XQuartz X server: Works fine, except, bizarrely, Ctrl+S has *no* effect in emacs! Just plain 's' works; ctrl + other keys works; ctrl+s works if I just use straight X11-over-the-network to run emacs. It's very strange. Any ideas as to what might be happening? (I have selected "keep existing keyboard layout", because selecting a keyboard layout explicitly in the Linux client didn't work - keys were wrongly mapped.) Regards, -- Robin Green

1 0

Disappearing text - problem and possible solution(?)
by Robin Green 17 Nov '10

17 Nov '10

Hi, I had a problem with text (of certain colours only) suddenly disappearing from windows, and not being visible again until I disconnected and reconnected. This problem has been reported on the FreeNX mailing list, but I didn't see any mention of it here yet. I found that setting the image compression method to png (20M, I think) instead of jpeg, fixed this problem for me (so far). But it might be just a coincidence that I stopped having this problem - on the FreeNX list, some people report that the issue is very intermittent and hard to pin down. I am using a self-built X2Go Server with the latest NX libraries (also self-built) on the server, and on the client I'm using the standard Ubuntu/Debian packages (on Maverick). Incidentally, the client machine is actually a Virtualbox VM, although I'm not sure this is relevant. Regards, -- Robin Green

2 3

X2Goclient for Windows command options
by Yitzhak Bar Geva 16 Nov '10

16 Nov '10

Is there any comprehensive documentation for the command options of the X2Goclient for Windows? I have not been able to fathom (for example) what and how to feed to the --session and --command arguments. Here's what we have to do: Launch the client in full screen with no menu options and complete login information already built in at launch. Kind of like kiosk mode in that the user can do nothing but enter the remote application. He (she) should not be able to exit the client or readjust any of the settings or even access the Windows outside of the client screen. assistance would be warmly appreciated. Thank you, Yitzhak

4 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev