x2go-user

x2go-user@lists.x2go.org

3 participants
2322 discussions

core dev-team testing x2goclient during next week
by Mike Gabriel 22 Jul '11

22 Jul '11

Hi all, thanks to everyone (esp. to John) for taking such a meticulous look at the latest x2goclient 3.99.0.0 (Win32 version). There obviously seem to be quite some open issues that we have to cross-check on our own development/testing systems. Alex (the core developer of x2goclient) will do that ASAP, we hope to come up with some feedback, patches, comments by the end of next week. If that gets delayed, I will let you know about the delay and come up with another timeline. Unfortunately, as X2go is not a commercial project, this cannot be any quicker. We apologize for this!!! If there are people out there you can read/write C code, please feel free to clone git://code.x2go.org/x2goclient.git and cross-read the code. Some other problems, however, may arise from x2goagent, as well. So you might use git://code.x2go.org/x2goagent.git for lecture as well... Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 1

RDP packing
by John A. Sullivan III 21 Jul '11

21 Jul '11

Hello, all. We are still trying to address the very poor performance of rdesktop sessions transmitted over NX - much slower than native RDP although we were expecting it to be much faster. In reading the NX documentation, we saw that they have a packing algorithm especially for RDP. However, whenever we enable this packing algorithm, the session aborts. Has anyone successfully used it? How do we troubleshoot this issue? Thanks - John

2 3

Re: [X2go-User] x2goclient version bumping -> 3.99.0.0
by Mike Gabriel 21 Jul '11

21 Jul '11

Hi Daniel, On Do 21 Jul 2011 16:51:31 CEST Daniel Lindgren wrote: > Hi Mike, > > 2011/7/21 Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de>: >> Try the server-side package upgrade first, if everything still fails >> afterwards, let us know. > > I can confirm that 3.0.99 on W7 x64 won't connect. I have server > version 3.0.99.5 installed. > > Only 3.01-13 works on W7 x64. If I interpreted the changelogs > correctly, 13 is the last version that didn't use libssh, I'm guessing > that the problem in later versions are related to libssh. Thanks for your feedback. I have cross-posted this issue on x2go-dev as it needs Alex to take a look at this issue... Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 1

Re: [X2go-User] X2go-User Digest, Vol 11, Issue 17
by brian mullan 21 Jul '11

21 Jul '11

John Are you sure there's nothing wacky going on with your Windows systems? I have been following your posts to the SPICE alias and maybe my memory is foggy but weren't you having some of the delays etc with SPICE as well when running the client? Brian ---------- Forwarded message ---------- > From: "John A. Sullivan III" <jsullivan(a)opensourcedevel.com> > To: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> > Date: Wed, 20 Jul 2011 09:13:40 -0400 > Subject: Re: [X2go-User] Fairly severe problems for our Windows users > On Wed, 2011-07-20 at 10:39 +0200, Mike Gabriel wrote: >

2 1

Fairly severe problems for our Windows users
by John A. Sullivan III 20 Jul '11

20 Jul '11

Hello, all. Internally, we are almost exclusively a Linux desktop shop and our experiences with X2Go are simply amazing. We architected a very powerful back end and the applications just explode on the screen even though all of them are across WAN connections. The X2Go performance is generally much better than our local systems. However, most of our initial clients are Windows users (for the X2Go client) and they are continually complaining about bad performance to the point we have stopped major new rollouts. We bit the bullet and installed Windows on our local systems and . . . they are right. The Windows client performance is much worse. I'll outline what I have seen but I have seen it consistently in 3.0.1-4, 3.0.1.18 with Xming, and 3.0.1.18 with vcxsrv. I also tried Pyhoca (0.7) but it kept mangling my authentication so I cannot report on it. There are two different types of problems. The first is generally laggard response. Typing, screen refreshes, scrolling - everything is generally slower. I would guess this is simply because we must shim a local X server between NX and GDI and it may simply be the way life is. I was hoping it would not be so noticeable. The second problem is far worse, however. It seems that sometimes screen painting of the active application stalls. Again, we've seen this on all three platforms described above. We most often see this in Iceweasel (we are using Debian X2Go Servers). Users will have multiple tabs open and will switch from one or the other or from one widget in an Ajax application to another and nothing happens for literally a minute or two. They can switch to other applications and work there so this is not simply packet loss on the line. The application itself does not update the screen. After a minute or two, everything they typed or the results or their mouse clicks all appear. This is the killer issue right along with the disappearing mouse. We cannot have our users wait for a minute or two every few minutes while they are working on their applications. Again, they can move to a different application and work but their previously active application, usually Iceweasel, just pauses and then catches all events up a minute or so later. Any suggestions on how to troubleshoot and fix this? Thanks - John

3 8

Newer x2goclient keeps crashin on ubuntu 10.04 !
by Fortier,Vincent [Montreal] 20 Jul '11

20 Jul '11

Using ppa:x2go ii pinentry-x2go 0.7.5.0-0~13~lucid1 Qt4-based PIN or pass-phrase entry dialog fo ii nxproxy 3.5.0-1-0~28~lucid1 NX X compression library ii x2goclient 3.0.99.0-0~88~lucid1 X2go Client application (Qt4) Core was generated by `x2goclient'. Program terminated with signal 11, Segmentation fault. #0 0x00007f8e7476a3f7 in QString::operator=(QString const&) () from /usr/lib/libQtCore.so.4 (gdb) backtrace #0 0x00007f8e7476a3f7 in QString::operator=(QString const&) () from /usr/lib/libQtCore.so.4 #1 0x0000000000458c75 in ?? () #2 0x000000000045b4f5 in ?? () #3 0x000000000046c2c0 in ?? () #4 0x00000000004c90a6 in ?? () #5 0x00007f8e7482ce3f in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4 #6 0x00000000004ca38b in ?? () #7 0x00000000004a837a in ?? () #8 0x00000000004ca5f0 in ?? () #9 0x00007f8e74829d49 in QObject::event(QEvent*) () from /usr/lib/libQtCore.so.4 #10 0x00007f8e7501b22c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4 #11 0x00007f8e750216fb in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4 #12 0x00007f8e7481a06c in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4 #13 0x00007f8e7481c7e7 in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4 #14 0x00007f8e748439d3 in ?? () from /usr/lib/libQtCore.so.4 #15 0x00007f8e715528c2 in g_main_context_dispatch () from /lib/libglib-2.0.so.0 #16 0x00007f8e71556748 in ?? () from /lib/libglib-2.0.so.0 #17 0x00007f8e715568fc in g_main_context_iteration () from /lib/libglib-2.0.so.0 #18 0x00007f8e74843513 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag >) () from /usr/lib/libQtCore.so.4 #19 0x00007f8e750cb46e in ?? () from /usr/lib/libQtGui.so.4 #20 0x00007f8e74818992 in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4 #21 0x00007f8e74818d6c in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4 #22 0x00007f8e7481caab in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4 #23 0x00000000004c37d8 in ?? () #24 0x00007f8e7397cc4d in __libc_start_main () from /lib/libc.so.6 #25 0x0000000000416499 in ?? () #26 0x00007fff26ce16e8 in ?? () #27 0x000000000000001c in ?? () #28 0x0000000000000001 in ?? () #29 0x00007fff26ce23d1 in ?? () #30 0x0000000000000000 in ?? () I tried using nxproxy provided with the distribution but only got either a crash OR this message: The connection with the remote server was shut down. Please check the state of you network connection. Note that: 1- it works well using the windows client 2- I also tried the ppa:x2go/stable with no success (refusing to connect with "Access denied. Athentification that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive" message) 3- it used to work well on my ubuntu 10.04 (with occasional crash) with previous version of the nxclient that I had installed using theses packages (note that I reinstalled theses since it's the only version I've found to be working ok) deb http://x2go.obviously-nice.de/deb/ lenny main ii nxcomp 3.4.0-1-1 NX compression library ii nxproxy 3.4.0-2-1 NX compression proxy ii pinentry-x2go 0.7.5-2 Qt4-based PIN or pass-phrase entry dialog fo ii x2goclient 3.01-5 x2goclient qt4 client On the server side I have (from ppa/stable): ii libxcomp3 3.4.0.8-0~29~lucid1 NX X compression library ii libxcompext3 3.4.0.2-0~25~lucid1 NX X11 protocol compression extensions libra ii libxcompshad3 3.4.0.3-0~10~lucid1 NX shadowing library ii nxproxy 3.4.0.3-0~26~lucid1 NX X compression library ii x2goagent 3.4.0.5-0~40~lucid1 Special NX-ized client, was developed by NoM ii x2goclient 3.0.1.18-0~46~lucid1 x2goclient qt4 client ii x2goserver 3.0.99.5-0~49~lucid1 X2go server daemon scripts Help really appreciated! Thnx! Vincent Fortier

1 0

Re: [X2go-User] Fairly severe problems for our Windows users
by John A. Sullivan III 20 Jul '11

20 Jul '11

On Tue, 2011-07-19 at 20:09 -0700, John Williams wrote: > What version of Windows (XP, Vista, 7) and 32- or 64-bit? > > I run x2goclient 3.01-13 on my 64-bit Windows 7 machines and it works > "good enough". > > However, I am running it on a LAN (ethernet and occasionally wifi). > Also, it is not problem-free. Sometimes the mouse pointer disappears > and can only be restored by restarting the application. I used to have > problems that sounded like you described for windows not repainting, > except I could get them to repaint by moving the mouse in front of > them. But I have not had the repainting problem for quite a while. > Although I did have a new problem show up in the past several weeks, > not sure if it is x2go or firefox/flash, but sometimes when switching > tabs in firefox, a rectangle of flash painting comes with the switch, > obscuring the new tab that I switched to. > > I'm also using a fairly old version of x2goserver, since I am running > Archlinux and the recent versions of x2goserver have not been built > for Archlinux yet. I was looking into installing x2goserver from > source, but I was waiting for the suidwrapper issues to settle down a > little bit first. > > Anyway, several months ago I experimented with different versions of > x2goclient on windows, and all of them had problems. 3.01-13 seemed to > be the least troublesome, so I have been using that for the last > several months. But I'd be willing to try some other versions if it > will help to troubleshoot the problems you are seeing. Good question; sorry for leaving that bit out. My current test environment is 32 bit Windows XP. We have another user testing 64 bit Windows 7. Most of the complaining users are 32 bit Windows XP. The disappearing mouse pointer is an Xming bug. Moving to vcxsrv will solve that. I think 3.0.1.14 was the first to support that but I'm not sure. We are also using an old X2Go Server - 3.0.1-5 I believe. Thanks - John

1 0

DRI role in x2go
by Shanon Loughton 20 Jul '11

20 Jul '11

Hi Im trying to understand how DRI works with a linux server display device and x2go. Id like to get opengl rendering completely in software on an Ubuntu server and so far so good - ive installed libgl1-mesa-swx11 which in Ubuntu auto removes libgl1-mesa-glx, and 'glxgears' and 'glmark' run nicely through x2go, considering the HW limitations. For some more complicated applications inc wine im running into openGL errors and im curious if any part of the server's X is still trying to direct render anything? I read somewhere that in the xorg.conf I can locate the device and set "NoAccel" to true which disables DRI and forces ARB shaders or something. Would this be worthwhile? thanks Shanon

1 0

Re: [X2go-User] Building X2GoClient from source
by Mike Gabriel 16 Jul '11

16 Jul '11

Hi John, On Di 12 Jul 2011 03:03:29 CEST "John A. Sullivan III" wrote: > But I then downloaded the x2goclient 3.0.1.18 tarball. I did not see a > configure file, a make script, or any templates. I did notice several > project files so I downloaded kdevelop to open the project files. I've > not used Kdevelop4 before (dinosaur that I am). It only wanted to open > the x2goclient-libssh.kdev4 project file. However, it cannot build it > and there is nothing to create the configure/make files. How does one > build this x2goclient from source? Thanks - John You have downloaded the last release without Makefile. The next release (and also the code in X2go Git) contains a Makefile that you can use with make && make install so that x2goclient gets installed to /usr/local/bin. Two options: (a) wait for Wednesday/Thursday, then I will patch code from Alex into the current Git code and after that x2goclient will be releases as 3.0.99.0 (as tarball). (b) clone the current Git code: $ git clone git://code.x2go.org/x2goclient.git and then do $ cd x2goclient $ make && make install Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 3

x2go und gpg-agent - no decryption of emails via kmail possible
by Stefan 15 Jul '11

15 Jul '11

Hi all, using x2goclient 3.0.99 on debian squeeze (client and server) together with kmail I run into a problem decrypting emails via gnupg. Unlike as with a Xserver-Session there seems not to be a startscript for gpg- agent in x2goserver. But if I start gpg-agent by hand using command "gpg-agent --daemon" still kmail can't decrypt emails. Starting the gpg-agent with the same command on a xsession initiated with "X -query SERVER" it works. One possible reason I guess in wrong environment variables for $DISPLAY - so the pinentry-qt4 gui (or any other pinentry-gui) could not start. So kmail ends up in "wrong passphrase". This problem allready went up in x2go on debian lenny. But the old kmail on lenny brought it's own frontend for decrypting mails without gpg-agent as a fallback - so it was at least possible to read encrypted emails - even if you had to submit your passphrase on every email again (because it's only remembered through gpg-agent). Any Ideas? Regards Stefan

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user