x2go-user

x2go-user@lists.x2go.org

2315 discussions

Need to remap ONE key ('p')
by Barnet Wagman 11 Jul '13

11 Jul '13

I have an x2go client-server configuration that works perfectly /except/ the that the letter lowercase 'p' does not appear when typed. Can someone tell my how to remap a single key? Here's my configuration: Server: Debian wheezy xfce4 x2goserver 4.0.1.3-0 Client: OS X 10.7.5 MacPorts x2goclient.app 4.0.1.0 thanks

2 1

Re: [X2Go-User] Sharing the display between two different users in x2go remove session
by Nigra Truo 11 Jul '13

11 Jul '13

Hi, I forgot to mention an important point on my setup: User Peter is in a chroot, while user Tom is not (on the main host, where the chroot is running). In a X2go session, I can use the same display when I do a xhost + and set the DISPLAY variable for the second user to the same as first user, but when I do that for the chroot user Peter, to be able to use Toms display, it does not work. What special steps are required to make this possible for chroot? I tried to install x2goserver in the chroot, set the port for ssh to 23, but I cannot log in that way to Peter. Thanks, Markus

1 0

Problems with meta characters on Mac client
by Anders Bruun Olsen 09 Jul '13

09 Jul '13

Hi, I can't seem to figure out how to make x2goclient send characters such as | (pipe) and @ to my terminalserver, when connected from a Mac client. It works fine from a Linux client. My terminalserver is running XFCE on Ubuntu with latest x2goserver and x2goclient 4.0.1.0 on OSX 10.8 with danish keyboard layout. I have tried changing layouts in the XFCE settings, but that just results in all keyboard input being scrambled around. When I set it back to "system standard" most keys work correctly, except stuff that requires meta-keys. Pipe on danish Mac is alt+i, which logically just produces the alt+i effect in XFCE. @ is alt+' (next to enter) on a danish mac keyboard. This produces nothing in XFCE. Any hints for how to at least be able to produce those characters in an x2goclient session? Even better would of course be a full keyboard-solution for Mac-users, but that might be tough, given the fundamental differences between PC and Mac keyboards :) -- Anders Bruun Olsen It-ansvarlig Det Danske Sprog- og Litteraturselskab (Society for Danish Language and Literature)

2 1

Re: [X2Go-User] Black screen for existing session
by Karel 08 Jul '13

08 Jul '13

No I must say, it's unstable under linux too, not only win7. My server side is with automatic updates switched on and I see multiple times in week a notifications about that. Sometimes it will suggest me to reboot my computer to update but I will not do it before weekend - somewhere in the saturday evening but not at every week. My linux client side is with automatic updates turned off and I will update it manually at friday afternoon (if I remember to do it and if I have a time to do it) before turning off for the weekend. So it is very hard to tell which updates and at which side was a cause of the problems. Windows client is updated very rarely. But somewhere at last two weeks I started to see problems connecting to suspended x2go sessions. After then I updated also windows client but no better stability. If I connect from linux client it will disconnect me after I try to connect to my suspended session (for a moment I can see my desktop and sometimes I can click something and run a command or two). Every time I see my suspended session (with ID number) so I will assume my login was correct. After few retries (number of times differ from day to day) I will get a connection and it is stable until evening then I disconnect it before going home. At home I will connect from windows client and also there is login correct because I see my suspended session with ID number (sometimes it is not 50 but over that but this is a same until I must make a new session). If I try to resume this session I will sometimes see my desktop for a few seconds (and sometimes I can click and run a command or two) but it will disconnect me again saying something about my incorrect credentials. After few retries I will get my session and this is stable until i disconnect it later. PyHoca-GUI is more stable and with this I can reconnect better. I have'nt used windows x2go-client for a last week or two anymore. But there are also cases there after a few unsuccessfull reconnections PyHoca-GUI will not show my suspended session anymore and I must start a new one. And there is a new session at the server - the old one is gone with all related programs closed.

3 7

multiple xorg.conf's in x2go TCE
by Stephan Wagner 26 Jun '13

26 Jun '13

We use the 'hostname' to distinguish the xorg.conf's for different thin clients. The attached init-script 'x2gohostname' replaces the default 'hostname' with the ethernet address of the network device eth0. Colons are replaced by dashes. Xorg will search the xorg.conf.<hostname> file in the directory /usr/etc/X11/, which correspond to /opt/x2gothinclient/chroot/usr/etc/X11/ in the PXE-boot environment. The init-script goes to /opt/x2gothinclient/chroot/etc/init.d/. Enter the chroot-environment executing 'x2gothinclient_shell'. 'update-rc.d x2gohostname defaults' will generate the symlinks for the different run-levels. Hope this helps someone, Stephan -- __________________________________________________ Dr. Stephan Wagner ITos GmbH Bitzi-Bendel 2555 9642 Ebnat-Kappel Tel: +41 (0)71 990 05 94 mailto:swagner@itos-gmbh.com http://www.itos-gmbh.com --------------------------------------------------

2 1

git from NX-Library and compile e install x2go from de source
by carlos andres perez lopez 24 Jun '13

24 Jun '13

HI all, I following this guide to compile and install x2go server in a mandriva 2010.0 version http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:x2goserver but when i try to git clone the nx library ( http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:nx-libs) i have this error: fatal: destination path 'nxcomp' already exists and is not an empty directory. is the same problem for xccommpext and nxcompshad so i do a search in the web-git and found the nxlibrarys in this url ( http://code.x2go.org/releases/source/nx-libs/) so i compile and install one by one from this repository. Now, in this moment i try to do the 12 point compile and install x2goserver from git, but when i do a make comand, the sistem block in this part for man_page in 'cd man && fin * -type f'; do man2html man/$man_pag > .build_man2html/html/$man_page.html;done and noting happend. can any helpme? -- todo se puede mi warrior C.A.P.L

1 0

Capture client-side error messages?
by Barnet Wagman 22 Jun '13

22 Jun '13

I'm attempting to setup x2go with Debian (wheezy) on an ec2-instance and the OS X client (this is my first attempt to use x2go). I'm getting error messages, but the window that displays them closes after a one or two seconds, so I can't read them. Is there a way to log the error messages with the OS X client? Or to keep the window open? thanks

2 1

Capture client-side error messages?
by Barnet Wagman 21 Jun '13

21 Jun '13

I'm attempting to setup x2go with Debian (wheezy) on an ec2-instance. When I attempt to connect with the x2go client, I get error messages, but the window on the client that displays them closes after a couple of seconds, so I can't read them. This happens with both the OS X client and the linux client (on Debian). Is there a way to log the error messages? Or to keep the window open? thanks

1 0

Arrow keys problems with openSUSE
by Carlos 19 Jun '13

19 Jun '13

Hello, I'm having the problem with arrow keys, i.e. when I press the down array key it's translated to the return key. I've tried with the command x2gosetkeyboard in the server-side but It didn't work. I'm using openSUSE 12.3 on both machines(server and client) I have configured KDE with spanish keyboard layout and pc105/es keyboard type in both machines. In x2goclient I have unchecked the option "Keep current keyboard Settings" (checked doesn't work either). The values here are: Keyboard layout:es Keyboard model: pc105/es Regards. Carlos

2 4

Future kerberos support?
by Dejan Panič 17 Jun '13

17 Jun '13

Hello Are there any plans to add Kerberos support to x2go in the future? Regards, Dejan

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user