I Have a fresh, up-to-date install of debian 9 x86-64, including x2go from the repos (the package version is 4.1.0.0-0x2go1).
So far kde5 is working pretty well. Sure, not as fast as XFCE, but quite usable.
With kde5, however, I'm running into an issue at logout: right after clicking the logout button, the display into the session window goes black, and a few seconds later, it shows a dialog stating that ksmserver segfaulted. Clicking "Close" results a briefly displayed second, similar dialog stating the same about drkonqi, and then, after closing that, yes, the session terminates.
Using the "Shutdown" button results in exactly the same behaviour.
The client is running on up-to-date debian 8 x86 (32 bits). The client package version is 4.0.3.1-4.
Has anyone noticed this issue before? Any hints?
Best regards, Joao
Am 16.05.2018 um 23:20 schrieb Joao Roscoe:
With kde5, however, I'm running into an issue at logout: right after clicking the logout button, the display into the session window goes black, and a few seconds later, it shows a dialog stating that ksmserver segfaulted. Clicking "Close" results a briefly displayed second, similar dialog stating the same about drkonqi, and then, after closing that, yes, the session terminates.
Just as an idea on how to narrow down the cause: You could try running the command "x2goterminate-session" from inside the X2Go KDE5 session window, and see if that also triggers the segfault, or if it leads to a clean logout.
Kind Regards, Stefan Baur
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
Now, this was an interesting first test: running x2goterminate-session from a console inside the x2go session resulted in a **instantly terminated session** - no delays, no error dialogs. Also, I've just installed kdebugsettings, but couldn't still to figure out how to use it.
Regards, Joao
On Wed, May 16, 2018 at 6:29 PM, Stefan Baur <X2Go-ML-1@baur-itcs.de> wrote:
Am 16.05.2018 um 23:20 schrieb Joao Roscoe:
With kde5, however, I'm running into an issue at logout: right after clicking the logout button, the display into the session window goes black, and a few seconds later, it shows a dialog stating that ksmserver segfaulted. Clicking "Close" results a briefly displayed second, similar dialog stating the same about drkonqi, and then, after closing that, yes, the session terminates.
Just as an idea on how to narrow down the cause: You could try running the command "x2goterminate-session" from inside the X2Go KDE5 session window, and see if that also triggers the segfault, or if it leads to a clean logout.
Kind Regards, Stefan Baur
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Am 17.05.2018 um 14:19 schrieb Joao Roscoe:
Now, this was an interesting first test: running x2goterminate-session from a console inside the x2go session resulted in a **instantly terminated session** - no delays, no error dialogs.
Well, I guess you could say x2goterminate-session does what it says on the label. ;-)
-Stefan
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
Now, this was an interesting first test: running x2goterminate-session from a console inside the x2go session resulted in a **instantly terminated session** - no delays, no error dialogs.
Well this was intended since this is the normal behaviour of x2goterminate-session.
Regards, Walid Moghrabi
TRAVAUX.COM BAT I - PARC CEZANNE 2 290 AVENUE GALILEE - CS 80403 13591 AIX EN PROVENCE CEDEX 3
----- Mail original -----
De: "Joao Roscoe" <joao.roscoe@gmail.com> À: x2go-user@lists.x2go.org Envoyé: Jeudi 17 Mai 2018 14:19:22 Objet: Re: [X2Go-User] Trouble terminating a kde session
Now, this was an interesting first test: running x2goterminate-session from a console inside the x2go session resulted in a **instantly terminated session** - no delays, no error dialogs. Also, I've just installed kdebugsettings, but couldn't still to figure out how to use it.
Regards, Joao
On Wed, May 16, 2018 at 6:29 PM, Stefan Baur < X2Go-ML-1@baur-itcs.de > wrote:
Am 16.05.2018 um 23:20 schrieb Joao Roscoe:
With kde5, however, I'm running into an issue at logout: right after clicking the logout button, the display into the session window goes black, and a few seconds later, it shows a dialog stating that ksmserver segfaulted. Clicking "Close" results a briefly displayed second, similar dialog stating the same about drkonqi, and then, after closing that, yes, the session terminates.
Just as an idea on how to narrow down the cause: You could try running the command "x2goterminate-session" from inside the X2Go KDE5 session window, and see if that also triggers the segfault, or if it leads to a clean logout.
Kind Regards, Stefan Baur
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
DISCLAIMER: This e-mail is private and confidential and may contain proprietary or legally privileged information. It is for the intended recipient only. If you have received this email in error, please notify the author by replying to it and then destroy it. If you are not the intended recipient you must not use, disclose, distribute, copy, print or rely on this e-mail or any attachment. Thank you
Hi,
On Mi 16 Mai 2018 23:20:24 CEST, Joao Roscoe wrote:
I Have a fresh, up-to-date install of debian 9 x86-64, including x2go from the repos (the package version is 4.1.0.0-0x2go1).
So far kde5 is working pretty well. Sure, not as fast as XFCE, but quite usable.
With kde5, however, I'm running into an issue at logout: right after clicking the logout button, the display into the session window goes black, and a few seconds later, it shows a dialog stating that ksmserver segfaulted. Clicking "Close" results a briefly displayed second, similar dialog stating the same about drkonqi, and then, after closing that, yes, the session terminates.
Using the "Shutdown" button results in exactly the same behaviour.
The client is running on up-to-date debian 8 x86 (32 bits). The client package version is 4.0.3.1-4.
Has anyone noticed this issue before? Any hints?
Best regards, Joao
this is a known issue and a flaw somewhere in KDE. Some time ago I
already had reported this to Debian BTS [1].
The KDE maintainers in Debian said, that this would need someone who
sends this issue to KDE upstream. I have that on my list (somewhere at
its end), moving the item further up on my to do list now.
Mike
[1] https://bugs.debian.org/892271
DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby mobile: +49 (1520) 1976 148 landline: +49 (4354) 8390 139
GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
-
Joao Roscoe -
Mike Gabriel -
Stefan Baur -
Walid MOGHRABI