Hello, I would need your help I followed the wiki “Installation of the X2Go TCE based on Debian“,and I have not got that the thinclient starts the OS

I’ve had two cases: Not installed “Provide firmware for certain hardware”:

•      ThinClient Start Boot MenuàSelect X2Go TCEàToolbar status loaded

  full, but nothing appears, only this message:

*[ 2.129610] sd 2:0:0:0: [sda] Assuming drive cache: write through*

*[ 2.129951] sd 2:0:0:0: [sda] Assuming drive cache: write through*

*[ 2.130546] sd 2:0:0:0: [sda] Assuming drive cache: write through*

Installed “Provide firmware for certain hardware”:

When I add the repository

*deb http://ftp.debian.org/debian <http://ftp.debian.org/debian> <distro-codename> main contrib non-free*

and install:

• apt-get install firmware-linux-nonfree firmware-bnx2 firmware-bnx2x firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek intel-microcode amd64-microcode. *

Display this error:

*Processing triggers for man-db ...*

*locale: Cannot set LC_CTYPE to default locale: No such file or directory*

*locale: Cannot set LC_MESSAGES to default locale: No such file or directory*

*locale: Cannot set LC_ALL to default locale: No such file or directory*

*Setting up firmware-bnx2 (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-bnx2x (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-linux-nonfree (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-myricom (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-netxen (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-qlogic (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up firmware-ralink (0.36+wheezy.1) ...*

*Setting up firmware-realtek (0.36+wheezy.1) ...*

*update-initramfs: deferring update (trigger activated)*

*Setting up iucode-tool (0.8.3-1) ...*

*Setting up amd64-microcode (1.20120910-2) ...*

*Updating microcode on all online processors...*

*update-initramfs: deferring update (trigger activated)*

*Setting up intel-microcode (1.20140122.1) ...*

*Updating microcode on all online processors...*

*update-initramfs: deferring update (trigger activated)*

*Processing triggers for initramfs-tools ...*

*update-initramfs: Generating /boot/initrd.img-3.2.0-4-486*

*cryptsetup: WARNING: could not determine root device from /etc/fstab*

*libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/3.13.0-24-generic/modules.dep.bin'*

*intel-microcode: cpuid MSR kernel support missing*

*intel-microcode: disabling IUCODE_TOOL_SCANCPUS option*

I ignore the error and continue the instructions.

When I turn on the thinclient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, and display this error:

*[ 1.714560] sd 2:0:0:0: [sda] Assuming drive cache: write through*

*[ 1.715139] sd 2:0:0:0: [sda] Assuming drive cache: write through*

*[ 1.716151] sd 2:0:0:0: [sda] Assuming drive cache: write through*

*[ 1.762616] platform microcode: firmware: agent aborted loading intel-ucode/06-2d-02 (not dound?)*

What am I doing wrong? Can you help me? Thanks