Hello, I would need your help  

I followed the wiki “Installation of the X2Go TCE based on Debian“,and I have not got that the thinclient starts the OS 


I’ve had two cases:


Not installed “Provide firmware for certain hardware”:

-          ThinClient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, but nothing appears, only this message:

[              2.129610] sd 2:0:0:0: [sda] Assuming drive cache: write through

[              2.129951] sd 2:0:0:0: [sda] Assuming drive cache: write through

[              2.130546] sd 2:0:0:0: [sda] Assuming drive cache: write through

Installed  “Provide firmware for certain hardware”:

When I add the repository 

deb http://ftp.debian.org/debian <distro-codename> main contrib non-free 

and install:

apt-get install firmware-linux-nonfree firmware-bnx2 firmware-bnx2x firmware-myricom firmware-netxen  firmware-qlogic  firmware-ralink firmware-realtek intel-microcode amd64-microcode. 

Display this error:

Processing triggers for man-db ...

locale: Cannot set LC_CTYPE to default locale: No such file or directory

locale: Cannot set LC_MESSAGES to default locale: No such file or directory

locale: Cannot set LC_ALL to default locale: No such file or directory

Setting up firmware-bnx2 (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-bnx2x (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-linux-nonfree (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-myricom (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-netxen (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-qlogic (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up firmware-ralink (0.36+wheezy.1) ...

Setting up firmware-realtek (0.36+wheezy.1) ...

update-initramfs: deferring update (trigger activated)

Setting up iucode-tool (0.8.3-1) ...

Setting up amd64-microcode (1.20120910-2) ...

Updating microcode on all online processors...

update-initramfs: deferring update (trigger activated)

Setting up intel-microcode (1.20140122.1) ...

Updating microcode on all online processors...

update-initramfs: deferring update (trigger activated)

Processing triggers for initramfs-tools ...

update-initramfs: Generating /boot/initrd.img-3.2.0-4-486

cryptsetup: WARNING: could not determine root device from /etc/fstab

libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/3.13.0-24-generic/modules.dep.bin'

intel-microcode: cpuid MSR kernel support missing

intel-microcode: disabling IUCODE_TOOL_SCANCPUS option

 

I ignore the error and continue the instructions.

When I turn on the thinclient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, and display this error:

[              1.714560] sd 2:0:0:0: [sda] Assuming drive cache: write through

[              1.715139] sd 2:0:0:0: [sda] Assuming drive cache: write through

[              1.716151] sd 2:0:0:0: [sda] Assuming drive cache: write through

[              1.762616] platform microcode: firmware: agent aborted loading intel-ucode/06-2d-02 (not dound?)

 What am I doing wrong? Can you help me? Thanks