x2go-user

x2go-user@lists.x2go.org

3 participants
2322 discussions

Connection Failed?
by Lynch, Tom 26 Sep '14

26 Sep '14

Hi, Just started to use x2go on a Fedora system here. The system crashed and the client can no longer connect to the server. It gets: Connection failed tput: No value for $TERM and no -T specified Been doing lots of searches on this, but didn't come back with anything. Is there a way to clear this problem? How can I reset a connection? Thanks for any help in advance. Tom Tom Lynch QA Automation Engineer | Verizon Enterprise Solutions Work: 1-978-427-6232 900 Chelmsford Rd, Lowell, MA 01851 Simplicity is prerequisite for reliability. - Edsger W. Dijkstra

2 1

Print-Screen on x2go client for windows.
by Helmer Teles 26 Sep '14

26 Sep '14

Hello List, Print-Screen Function seems not to be working in the windows client for X2GO, but it's working on x2goclient for Linux. Any thoughts/experience on this matter? The setup in use is the kind of X2GO acts as a gateway/proxy to a windows 2008r2 Server using xfreerdp to connect to a windows server. Regards. -- Com os melhores cumprimentos, Helmer Teles http://hteles.wordpress.com “Sent from My Linux Operating System” Please don't send me proprietary file formats, use ISO standard ODF instead (ISO/IEC 26300)

1 0

slightly offtopic: free Sun SunRay 1, 1G & 2 thinclients (no, x2go doesn't run)
by Alexander Wuerstlein 24 Sep '14

24 Sep '14

Hello, I'm sorry for the slightly offtopic message, but I thought somebody around here might be interested: Since we ceased using the SunRay thinclient system[0] here at our department, we will give away the following for free: 45 SunRay thinclients, mostly SunRay1 (VGA only), some SunRay1G (1 DVI port) and 8 SunRay2FS (2 DVI ports, faster processor)[1]. Condition is usually okayish, some have slightly broken VGA/DVI output which causes display glitches, some have trouble with the power supply. You will need the appropriate SunRay Server Software (see [0]), including licenses which we cannot provide you with, to use the hardware. There is no alternative firmware, Linux distribution or (working) alternative server software that I know of. X2Go definitely won't run on a SunRay. But maybe you have a preexisting SunRay infrastructure and need some spare thinclients. The SunRays can be picked up in 91058 Erlangen, Germany (preferred) or be mailed to you (only within the EU, I don't want to deal with customs) if you reimburse the postage fees. Please email me off-list if you are interested. Sorry again for the off-topic message. Ciao, Alexander Wuerstlein. [0] http://www.oracle.com/technetwork/server-storage/sunrayproducts/docs/index.… [1] http://www.oracle.com/technetwork/documentation/sun-ray-193669.html

1 0

Problems with Screen Saver in kubuntu 14.04.
by Sergey Savko 24 Sep '14

24 Sep '14

Hi. In Kubuntu 14.04 does not work native Screen Saver. Lock settings are set to 1 minute wait. But after this time, nothing happens. The logs written «Xlib: extension" MIT-SCREEN-SAVER "missing on display" ». Is it possible to do so would native Screen saver work?

2 1

Libreoffice 4.x on X2go in Unity
by Kjetil Fleten 19 Sep '14

19 Sep '14

Hi There is an odd problem when we launch Libreoffice 4.x spreadsheets in X2go: If we open more than 3 spreadsheets at a time, some documents seems to be open in the task management panel, even if they are closed down. The problem does not occur with Libreoffice textdocuments. Neither do the problem occur on Libreoffice 3.x. And finally, the problem does not occur if I log on directly on the server without X2go. The server is running Ubuntu 12.04 Unity. I have tried with both X2goclient and pyhoca client on Ubuntu 14.04. I attach a screenshot. Regards Kjetil

1 0

Re: [X2Go-User] Stopping a session from suspending on disconnect
by brian mullan 19 Sep '14

19 Sep '14

Stefan, I know its easy for a non-dev to say because I don't have to change the code but I agree with you... *> judging from this user feedback, maybe we should change our terminology? > "Detach" (German: "Trennen") seems to be less misleading than > "Suspend" (German: "Anhalten").* "suspend" *implies* stopping something with the intent to restart later. As Mike mentions, the problem *could be* solved by teaching people what x2go suspend currently means. That can work but to me... its not natural. It reminds me of an old cartoon where a plumber had installed the hot & cold shower controls backwards (hot=cold, cold=hot)... The plumber was talking to the homeowner telling him... "Hey... its simple... when you take a shower just remember "H" means - Holy cow thats Cold ! <g> Brian

4 6

cheap hw client for x2go
by Luciano Gabriel Andino 18 Sep '14

18 Sep '14

Hello! I've plugged a raspberry pi directly into a hdmi monitor, booted "Raspberry Pi Thin Client project" and installed x2go client. Seemed hw is not usable for a x2go session (not smooth, really slow). Is there any cheap, x2go capable solution? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

3 4

screen size problem in gnome session
by Luciano Gabriel Andino 17 Sep '14

17 Sep '14

hi! this is my first post. I have a problem in gnome sesión using Windows client. Gnome Window session is much bigger than client. Not possible configuration in client's side. Meawhile no problem in KDE. What can I do to solve this? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

2 1

Stopping a session from suspending on disconnect
by Martyn Welch 17 Sep '14

17 Sep '14

Hi All, I've been using x2go on a number of machines that we have remote users connect to for a while now. Before using x2go we were using neatx, but the development on that seems to have stalled and isn't available packaged for newer Linux distributions. X2go is generally working well as a replacement (thanks guys!), however one complaint that I'm getting from users is that x2go suspends sessions on disconnect. Some users have graphical tools that they are kicking off to run long tasks and want to disconnect, leaving the task to complete (for example, over night) without needing the session to be maintained. This was the default behaviour in neatx and hence the behaviour that the users have come to expect (sessions wouldn't suspend on disconnect). Is there any mechanism built into x2go to achieve this? Martyn -- Martyn Welch (Lead Software Engineer) | Registered in England and Wales GE Intelligent Platforms | (3828642) at 100 Barbirolli Square T +44(0)1327322748 | Manchester, M2 3AB E martyn.welch(a)ge.com | VAT:GB 927559189

4 6

Client and broker authentication
by Michael Gale 17 Sep '14

17 Sep '14

Hello, When using the broker with Apache and WSGI, it is possible to have the client perform NTLM authentication against Apache? That way we can offer single sign-on for our users, we want to authenticate against an AD server and some clients are Windows desktop machines. Thanks Michael

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user