Hi,
I am have been able to setup x2go server very quick on a ubuntu instance. I have a couple of questions though
I have been able to connect using windows client version 3.01-4 but not with 3.01-18
I get the following error
NXPROXY - Version 3.4.0 Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '7472'. Session: Starting session at 'Wed Jun 29 11:43:32 2011'. Info: Connecting to remote host 'localhost:30010'. Info: Connection to remote proxy 'localhost:30010' established. Connection timeout, aborting
I have ports open from 30000 - 300020 on my firewall. Is it possible to limit the port range? As I would only like a small number of ports open.
When I try and auto mount a share I get connection reset by peer error is there any additional steps I need to follow to allow file transfers?
Thanks Ian Tasker Director of Innovation and Development Co-Chair SIF UK Technical Board Naace Sponsoring Partner and Member
[cid:image001.jpg@01CC3651.0E505BA0] t: 08000 488 777 e: ian.tasker@schoolsict.net<https://outlook.hostedservice2.net/owa/UrlBlockedError.aspx> w: http://schoolsict.net<http://schoolsict.net/> twitter: @schoolsict<http://www.twitter.com/schoolsict>
Information contained in this e-mail is intended for the use of the addressee only, and is confidential. Any dissemination, distribution, copying or use of this communication without prior permission of SchoolsICT Limited is strictly prohibited. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While we have taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage, which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.
Hi Ian, I've added x2go-user list to this reply since I'm not sure if this is something for the devs.
**
I have been able to connect using windows client version 3.01-4 but not with 3.01-18****
**
3.01-18 has never worked for me, it just won't connect succesfully. The latest version that seems to work well is 3.01-13, you can download it here: http://www.x2go.org/deb/pool-untested/x2goclient/x2goclient-3.01-13-setup.ex...
Cheers, Daniel
Hi Daniel,
On Mo 04 Jul 2011 07:15:42 CEST Daniel Lindgren wrote:
3.01-18 has never worked for me, it just won't connect succesfully. The latest version that seems to work well is 3.01-13, you can download it here: http://www.x2go.org/deb/pool-untested/x2goclient/x2goclient-3.01-13-setup.ex...
What Xserver are you using on Windows? The next x2goclient version
will ship with vcxsrv (can be downloaded from SourceForge). The
x2goclient-3.0.1.18 (current version) allows you to configure the
Xserver to run with x2goclient. Install VcXsrv manually and select its
usage in the client settings of x2goclient.
Hope that helps, Mike
--
DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419
GnuPG Key ID 0xB588399B mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xf...
Hi Mike,
I was using the version form the ubuntu repository (sudo add-apt-repository ppa:x2go/stable) which didn't work with x2goclient-3.0.1.18
Thanks Ian Tasker Director of Innovation and Development Co-Chair SIF UK Technical Board Naace Sponsoring Partner and Member
t: 08000 488 777 e: ian.tasker@schoolsict.net w: http://schoolsict.net twitter: @schoolsict
Information contained in this e-mail is intended for the use of the addressee only, and is confidential. Any dissemination, distribution, copying or use of this communication without prior permission of SchoolsICT Limited is strictly prohibited. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While we have taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage, which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.
-----Original Message----- From: x2go-dev-bounces@lists.berlios.de [mailto:x2go-dev-bounces@lists.berlios.de] On Behalf Of Mike Gabriel Sent: 04 July 2011 11:59 To: x2go-dev@lists.berlios.de; Daniel Lindgren Cc: X2go-User@lists.berlios.de; x2go-dev@lists.berlios.de Subject: Re: [X2go-Dev] Windows Client Issue
Hi Daniel,
On Mo 04 Jul 2011 07:15:42 CEST Daniel Lindgren wrote:
3.01-18 has never worked for me, it just won't connect succesfully. The latest version that seems to work well is 3.01-13, you can download it here: http://www.x2go.org/deb/pool-untested/x2goclient/x2goclient-3.01-13-se tup.exe
What Xserver are you using on Windows? The next x2goclient version will ship with vcxsrv (can be downloaded from SourceForge). The x2goclient-3.0.1.18 (current version) allows you to configure the Xserver to run with x2goclient. Install VcXsrv manually and select its usage in the client settings of x2goclient.
Hope that helps, Mike
--
DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419
GnuPG Key ID 0xB588399B mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xf...
No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1388 / Virus Database: 1516/3742 - Release Date: 07/03/11
(Accidentally replied to Mike only, resending to list).
Hi Mike,
3.01-18 has never worked for me, it just won't connect succesfully. The latest version that seems to work well is 3.01-13, you can download it here:
http://www.x2go.org/deb/pool-untested/x2goclient/x2goclient-3.01-13-setup.ex...
What Xserver are you using on Windows? The next x2goclient version will ship with vcxsrv (can be downloaded from SourceForge). The x2goclient-3.0.1.18 (current version) allows you to configure the Xserver to run with x2goclient. Install VcXsrv manually and select its usage in the client settings of x2goclient.
I've tested both XMing (internal in 3.01-18) and vcxsrv 1.10.1.1, neither work. While testing 3.01-18 I've disabled firewalls, antivirus and anything else that could cause problems. No luck.
This is what it normally looks like:
NXPROXY - Version 3.4.0
Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information.
Info: Proxy running in client mode with pid '2068'. Session: Starting session at 'Mon Jul 4 14:31:47 2011'. Info: Connecting to remote host 'localhost:30004'. Info: Connection to remote proxy 'localhost:30004' established. Info: Connection with remote proxy completed. Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Warning: Failed to read data from the X auth command. Warning: Generated a fake cookie for X authentication. Info: Using LAN link parameters 1536/24/1/0. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. Info: Not using NX delta compression. Info: Not using ZLIB data compression. Info: Not using ZLIB stream compression. Info: Not using a persistent cache. Info: Forwarding X11 connections to display 'localhost:0'. Session: Session started at 'Mon Jul 4 14:31:48 2011'. Info: Established X server connection. Info: Using shared memory parameters 0/0K. Warning: No data received from remote proxy within 30 seconds.
At best I get a grey X window with the session ID in the window title, but normally nothing at all shows up. Sometimes x2goclient.exe crashes immediatley after connecting.
3.01-13 works out of the box (with working cut and paste to/from X window).
I use Windows 7 Pro x64 SP1 with Swedish language settings. The server is Debian Squeeze with x2goserver 3.0.99-5+squeeze~main~31~build1.
Cheers, Daniel
On 2011-07-04 15:02, Daniel Lindgren wrote:
I've tested both XMing (internal in 3.01-18)
I've switched back to 3.01-14. It does crash quite often while connecting, but once a connection is made, it is running quite stable.
Cheers Morty
-- Dipl.-Ing. Moritz 'Morty' Struebe (Wissenschaftlicher Mitarbeiter) Lehrstuhl für Informatik 4 (Verteilte Systeme und Betriebssysteme) Friedrich-Alexander-Universität Erlangen-Nürnberg Martensstr. 1 91058 Erlangen
Tel : +49 9131 85-25419 Fax : +49 9131 85-28732 eMail : struebe@informatik.uni-erlangen.de WWW : http://www4.informatik.uni-erlangen.de/~morty
2011/7/4 Moritz Struebe <Moritz.Struebe@informatik.uni-erlangen.de>:
I've switched back to 3.01-14. It does crash quite often while connecting, but once a connection is made, it is running quite stable.
I've had some success connecting with 3.01-14, but if I remember correctly cut and paste wouldn't work. 3.01-13 is the latest Windows client I've tested that succesfully connects and has working cut and paste (both ways).
Cheers, Daniel
On 2011-07-04 15:30, Daniel Lindgren wrote:
I've had some success connecting with 3.01-14, but if I remember correctly cut and paste wouldn't work. 3.01-13 is the latest Windows client I've tested that succesfully connects and has working cut and paste (both ways). C&P is a little bit tricky. It normally works, but sometimes I have to cut in Win as well as X once to get it working.
Cheers Morty
-- Dipl.-Ing. Moritz 'Morty' Struebe (Wissenschaftlicher Mitarbeiter) Lehrstuhl für Informatik 4 (Verteilte Systeme und Betriebssysteme) Friedrich-Alexander-Universität Erlangen-Nürnberg Martensstr. 1 91058 Erlangen
Tel : +49 9131 85-25419 Fax : +49 9131 85-28732 eMail : struebe@informatik.uni-erlangen.de WWW : http://www4.informatik.uni-erlangen.de/~morty
Hi,
On Mo 04 Jul 2011 15:35:17 CEST Moritz Struebe wrote:
On 2011-07-04 15:30, Daniel Lindgren wrote:
I've had some success connecting with 3.01-14, but if I remember correctly cut and paste wouldn't work. 3.01-13 is the latest Windows client I've tested that succesfully connects and has working cut and paste (both ways). C&P is a little bit tricky. It normally works, but sometimes I have to cut in Win as well as X once to get it working.
with VcXsrv 1.10.1.1 there should be no issues around C&P anymore...
x2goclient 3.01-13/14 still use XMing, though.
Greets, Mike
--
DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419
GnuPG Key ID 0xB588399B mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xf...
I've done some more testing and I can't get 3.01-14 or 3.01-18 to work on Windows 7 x64 SP1, a lot of crashes and a few started sessions but never a fully working X window. 3.01-13 works pretty much every time.
On Windows Server 2003 SP2 (32-bit), 3.01-18 works with both Xming and vcxsrv.
Seems like the transition to libssh (which I presume is version 3.01-14 and later?) is causing trouble on 64-bit Windows 7 .
Cheers, Daniel
On Mon, Jul 4, 2011 at 11:31 AM, Daniel Lindgren <bd.dali@gmail.com> wrote:
I've done some more testing and I can't get 3.01-14 or 3.01-18 to work on Windows 7 x64 SP1, a lot of crashes and a few started sessions but never a fully working X window. 3.01-13 works pretty much every time.
On Windows Server 2003 SP2 (32-bit), 3.01-18 works with both Xming and vcxsrv.
Seems like the transition to libssh (which I presume is version 3.01-14 and later?) is causing trouble on 64-bit Windows 7 .
I had the same problem when I tested the windows clients several months ago. I have been using 3.01-13 ever since. It has the bug that the mouse cursor will disappear after some random amount of time, but I have learned to live with that by restarting the client whenever that happens.
-
Daniel Lindgren -
Ian Tasker -
John Williams -
Mike Gabriel -
Moritz Struebe