x2go-dev

x2go-dev@lists.x2go.org

5400 discussions

Bug#1254: rdpclient parameter in sessions file
by mike.gabriel＠das-netzwerkteam.de 17 Feb '18

17 Feb '18

Package: x2goclient The rdpclient sessions param (used for DirectRDP) expects "xfreerdpnew" for xfreerdp for version 2. This value is silly and should be replaced by "xfreerdp2". Mike -- Sent from my Fairphone 2 (running Sailfish OS)

1 0

Bug#371: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #371 thanks Hello, we are very hopeful that X2Go issue #371 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#117: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #117 thanks Hello, we are very hopeful that X2Go issue #117 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#575: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #575 thanks Hello, we are very hopeful that X2Go issue #575 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#1047: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #1047 thanks Hello, we are very hopeful that X2Go issue #1047 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#102: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #102 thanks Hello, we are very hopeful that X2Go issue #102 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#557: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #557 thanks Hello, we are very hopeful that X2Go issue #557 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#82: X2Go issue (in src:x2goserver) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #82 thanks Hello, we are very hopeful that X2Go issue #82 reported by you has been resolved in the new release (4.1.0.0) of the X2Go source project »src:x2goserver«. You can view the complete changelog entry of src:x2goserver (4.1.0.0) below, and you can use the following link to view all the code changes between this and the last release of src:x2goserver. http://code.x2go.org/gitweb?p=x2goserver.git;a=commitdiff;h=fef09acace029b4… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goserver. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goserver Version: 4.1.0.0-0x2go1.2 Status: RELEASE Date: Thu, 15 Feb 2018 23:03:48 +0100 Fixes: 82 86 102 117 121 371 557 575 1047 Changes: x2goserver (4.1.0.0-0x2go1.2) RELEASED; urgency=low . [ Mike Gabriel ] * Bump development upstream version to 4.1.0.0. * New upstream version (4.1.0.0): - Transform x2gologlevel.pm into proper Perl module X2Go::Log. - Transform x2godbwrapper.pm into proper Perl module X2Go::Server::DB. - Transform x2gosqlitewrapper.pl into small wrapper script and move the SQLite3 into Perl package X2Go::Server::DB::SQLite3. - Move x2gosqlitewrapper into Perl package X2Go::Server::DB::SQLite3. - Move PostgreSQL DB code into Perl package X2Go::Server::DB::PostgreSQL. - Move X2Go SQL configuration files (/etc/x2go/x2gosql) into package libx2go-server-db-perl. - Install /etc/x2go/x2go_logout with its directory x2go_logout.d via Makefile installation. - Fix new SQLite3 wrapper for db_getmounts Perl call. - Fix list output in new SQLite3 wrapper. - Make session type label XFCE a valid session that starts xfce4-session. - Fix failures of x2gogetagent that was related to faulty regexp in SQLite3 DB wrapper script. - Add X2Go Server feature X2GO_LIST_SHADOWSESSIONS. - Break execution of x2gosuspend-session / x2goterminate-session if the script is called without session as first argument and $X2GO_SESSION not set. (Fixes: #82). - Make x2goruncommand aware of the Cinnamon desktop shell. (Fixes: #117). - Fix build-arch target in x2goserver/Makefile. (Fixes: #121). - Load config files from a Perl package (X2Go::Config). - Disable SupeReNicer by default. - Fix session handling for cross-user-account desktop sharing. Now session names of desktop sharing session start with the username of the user who is requesting the desktop sharing, rather than the username of the person who shares his/her desktop. - Do not superenice desktop sharing / shadow sessions. - Drop obsolete components x2goserver-compat, x2goserver-pyhoca. - Makefile: pre-set the PERL_INSTALLDIRS var with ,,vendor''. Use pure_install rather than install. - Avoid one argument system calls in x2golistshadowsessions. - Provide Perl functions to capture stdout/stderr with multi-argument system calls. - Avoid one argument system calls and backticks in SupeReNicer. - Handle situations in SupeReNicer where the agent PID is not set. - Start working on an abstraction layer (as Perl package X2Go::Server::Agent) that handles all (NX) agent specific actions. Move duplicate code into that new Perl package. - Security audit of complete code tree, avoid one-argument system calls where possible, avoid backticks, use more quotes in shell scripts. - Add tunneling port allocation for TeleKinesis framework. - Only use teki_* fields with PostgreSQL DB backend if TeKi is enabled. - Provide --updatedb feature in x2godbadmin if DB backend is PostgreSQL. - Execute post-start.d extension scripts _after_ the session information has been submitted to the session DB. This allows execution of x2golistsessions and other X2Go commands in post-start.d extension scripts. - Re-arrange parameter order of x2gocreatesession and related DB functions. Make sure the session ID comes first and we have only optional parameters towards the end of the parameter array. - Fix accessing ARGV in X2Go::Utils:check_x2go_sessionid sub. (Fixes: #575). - Fix TeKi storing Telekinesis ports in PgSQL-based session DB. Allow negative port numbers for the case that Telekinesis is not installed. - Fix db_insertmount (SQLite). Pathnames must not be enclosed by parentheses. - Make sure to return "1" in X2Go::Server::DB Perl functions that don't return anything by default. - Make it possible to change the state of shadow sessions. - Provide --debug option for x2gocleansession that allows running x2gocleansessions in foreground (and in debug mode). - Properly clean up shadow sessions for the session database. - Move x2goagent wrapper package around nxagent into X2Go Server. (Fixes: #1047). - Update execution logic of the x2goagent wrapper script. The script now sets the env var $NXAPP and then calls the nxagent wrapper script. For this to work properly, the x2goagent symlinks has to be placed into directory where the nxagent executable is installed ($LIBDIR/nx/bin/, normally). - Revisit packaging for latest change in x2goserver-x2goagent. Don't inject $(LIBDIR) rather than injecting $(NXLIBDIR) via debian/rules and x2goserver.spec. - x2goagent wrapper script: Use exec command to launch nxagent. Put "$@" in quotes. * debian/control: + Package X2Go::Log in separate package: libx2go-log-perl. + Package X2Go::Server::DB in separate package: libx2go-server-db-perl. + x2goserver package: Depend on libx2go-log-perl, libx2go-server-db-perl. + Move x2goserver.conf into separate package: x2goserver-common. + Use Breaks/Replaces to exchange x2goserver.conf in x2goserver package by x2goserver.conf in new x2goserver-common package. + Move several x2goserver-* package to x2goserver's Recommends field. + Add Reinhard Tartler to Uploaders. + Add libcatpure-tiny-perl to Depends: field of libx2go-server-perl. + Move x2gosql config to x2goserver-common. + Several style and dependency fixes. Use Conflicts: instead of Breaks: for unversioned package conflicts. + Test if telekinesis-server is installed server-side. If so, prepare the telekinesis session sub-directory. + Add D (bin:package libx2go-server-db-perl): libswitch-perl. + Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< 3.5.99.2~). + Nooo... we need to break/replace x2goagent (<< 2:3.5.99.2~). * debian/x2goserver.postinst, debian/libx2go-server-db-perl: + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. - Make sure X2Go session DB files get updated during postinst. * debian/libx2go-server-db-perl installation scripts: + Remove dpkg-statoverride during remove on prerm, not on purge in postrm. * debian/x2goserver.init: + Rely on $PATH when invoking x2gocleansessions. * debian/x2goserver.service: + Provide systemd service file. * Move code in pre/post+inst/rm scripts around (from x2goserver package to libx2go-server-db-perl and x2goserver-common). * debian/copyright: + Provide DEP-5 compliant copyright file. + Add copyright.in auto-generated file (by licensecheck+CDBS) for later reference. * debian/x2goserver-x2goagent: + Make sure the .features file for x2goserver-x2goagent ends up in its bin:pkg. * x2goserver.spec: + Bring debian/control and x2goclient.spec in sync. + Make sure x2godbadmin is evoked from package x2goserver. + Handle X2Go session DB creation in x2goserver _and_ perl-X2Go-Server-DB on postinst. + Set buildroot if we build for EPEL-5. + Use deprecated %{_initrddir} macro for EPEL-5 builds. + Take advantage of native RHEL support (since 4.0.1.10). + Install SQLite3 wrapper as setgid x2gouser. (Fixes: 371). + Assure that SQLite3 session DB file gets created on install (unless PostgreSQL is used as session DB backend). + Make sure x2goserver-*.features files do not get installed multiple times into various packages. + Make sure X2Go Server (x2gocleansessions) starts after installation. + Make sure X2Go session DB files get updated during postinst. + Require Perl(Switch) (bin:package x2goserver). + Don't fail in %post during X2Go session DB creation. + Fix call of x2godbadmin --updatedb during package upgrade. + Hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR to x2goserver's Makefiles. Required for x2goagent symlink to be properly installed into the same folder where the nxagent executable gets installed. + Also hand over %{_prefix}/%{_libdir}/nx as $NXLIBDIR when executing make install. + Add B-R: nxagent. Needed for %{_prefix}/%{_libdir}/nx/bin to be owned. . [ Guangzhou Nianguan Electronics Technology Co.Ltd. ] * New upstream version (4.1.0.0): - Add SupeReNicer support. - Provide string sanitizers. Esp. a sanitizer for X2Go session IDs. . [ Otto Kjell ] * New upstream version (4.1.0.0): - Add markdown files for most of the X2Go Server project folders. (Fixes: #102). - Fix "server" command line option for x2golistsessions call in x2golistdesktops. . [ Orion Poplawski ] * New upstream version (4.1.0.0): - Use new script x2gopath in Perl::API. (Fixes: #86). * x2goserver.spec: - Fix NXLIBDIR path to use %{_libdir} directly. . [ Oleksandr Shneyder ] * New upstream version (4.1.0.0): - Fix x2godbadmin. Set right column name "tekidata_port" in create table. (Fixes: #557). - Unset LD_LIBRARY_PATH for the case when x2gostartagent started from x2godesktopsharing. . [ Mark Pederson-Cook ] * debian/po: + Translate DebConf templates to Danish. . [ Kaan Ozdincer ] * debian/po: + Translate DebConf templates to Turkish. . [ Mihai Moldovan ] * New upstream version (4.1.0.0): - x2goserver/sbin/x2gocleansessions: add timestamp to debug output. - x2goserver/sbin/x2gocleansessions: also (correctly) log to syslog if started with --debug parameter. - libx2go-server-db-perl/lib/libx2go-server-db-sqlite3-wrapper.pl: don't use deprecated defined (@array) construct which never really did what one would expect (defined () can only be used on scalar values.) - x2goserver/bin/x2gofeaturelist: whitespace only. - x2goserver-x2goagent/: rename share/x2go/rgb back to etc/rgb. - x2goserver-x2goagent/Makefile: install etc/rgb as in ${SYSCONFDIR}/x2go/rgb again and create a symlink from that to ${DATADIR}/x2go/rgb. - x2goserver-x2goagent/Makefile: fix left-over reference to share/x2go/rgb. It's back to etc/rgb now. - x2goserver-x2goagent/share/x2go/x2gofeature.d/: rename x2goserver-agent.features to x2goserver-x2goagent.features. - x2goserver/sbin/x2gocleansessions: add -d short parameter for enabling debugging capabilities to POD. - README.md: whitespace fixes and typo correction. - X2Go/Server/DB/SQLite3.pm: fix command name in error messages. - X2Go/Utils.pm: backport user name regex changes. - x2goserver-x2goagent/etc/x2goagent.options: reenable XFIXES extension. - x2goserver/bin/x2gostartagent: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/bin/x2goresume-session: fix most other shellcheck warnings, more quotes, curly braces et. al. - x2goserver/lib: add new perl wrapper script for X2Go::Utils::is_true called x2goistrue. - x2goserver/bin/x2gostartagent: replace inline perl with calls to x2goistrue and x2goqueryconfig. - x2goserver/bin/x2gostartagent: support disabling or enabling RANDR Xinerama in x2goagent via any parameter in the form randr_xinerama=value (with value interpreted by x2goistrue). Note that it is not possible to change the RRXinerama preference after a session has been started currently. - x2goserver/bin/x2gostartagent: pass in xinerama configuration value via environment. Doing it via an argument is just asking for trouble since we actually have optional parameters. - x2goserver/bin/x2gostartagent: add FIXME entry for the SHADREQ_USER optional parameter. No client actually uses it and it makes the whole parameter handling fragile. - x2goserver/bin/x2go{startagent,resume-ression}: instead of disabling RANDR Xinerama if no xinerama support has been requested, switch to modifying the xinerama nx/nx option. For x2gostartagent, that means a variable rename from X2GO_RANDR_XINERAMA to X2GO_XINERAMA with essentially the same semantics. For x2goresume-session, a new parameter is added. - x2goserver/bin/x2gostartagent: disable Xinerama support by default, more compatible with the old behavior (and python-x2go/PyHoca). - x2goserver/bin/x2go{resume-session,runcommand}: drop obsolete and now-unused NX_XINERAMA_CONF variable. - x2goserver/lib/x2gogetrandomport: fix function name, leading to startup failures. - x2goserver/lib/x2go{check,getfree}port: parameter expansion and single quotes don't mix well. Use double quotes instead. - x2goserver/lib/x2gocheckport: fix X2GO_LIB_PATH -> x2go_lib_path typo. - x2goserver/bin/x2gostartagent: output variable expects a string, not an integer. - x2goserver/lib/x2goistrue: perl strips empty parameters from @ARGV, so work around that gracefully. - x2goserver/lib/x2goistrue: use shift unconditionally and check the parameter to be defined instead. - x2goserver/bin/x2goresume-session: handle missing xinerama parameter in options string gracefully, skipping that part (and the other optional geometry string) correctly. - x2goserver-common/Makefile: whitespace (lineup) only. - */man/*/*: update dates and version in manpages. - */VERSION.*: remove -preview tag. * x2goserver.spec: - Only create session DB in x2goserver's post install script. Do use proper Requires(post) statements to make sure perl-X2Go-Server-DB and x2goserver-common are available when x2goserver's post install script is being executed. Fixes installation bugs reported by Michael DePaulo. - Add support for %{_datadir}/applications symlink in %{_sysconfdir}/x2go. + Add creation and deletion bits to %post and %preun scriptlets. + Refactor %post, %pre, %postun and %preun scriptlets to accommodate for last change. + Don't use %{_sbindir} for chkconfig and service on SLE{S,D}. %{_sbindir} is a macro for /usr/sbin/, whereas chkconfig and service reside in /sbin/. - Change deprecated and removed PreReq to Requires(pre) header. - Move shadow/shadow-utils/pwdutils Requires to x2goserver-common sub package (where they are actually needed.) - Re-add etc/rgb as a config file. - Correctly create and specify the x2goserver-x2goagent subpackage, instead of a standalone x2goagent package. - Fix dependency upon versioned nxagent. - Let x2goserver depend upon x2goagent-virtual, add Provides: keyword to x2goserver-x2goagent (also need to be implemented within X2Go's nx-libs master branch.) - Add script/symlink ${LIBDIR}/x2go/bin/x2goagent to installed file list. - Split up x2gosql installed file list part into actual directories and files. - Disable stale symlinks check for now (and add comment to re-enable it once we've switched to nx-libs 3.5.99 or higher for good.) - Actually export NO_BRP_STALE_LINK_ERROR in a correct way/with the correct value. Never blindly trust the internets if something looks odd. - Add %{_libdir}/x2go/bin as owned directory for x2goserver-x2goagent. Also owned by the alternative package x2goagent in nx-libs. - Exclude %{_bindir}/x2goagent from being packaged into x2goserver package. - x2goserver-x2goagent needs nxagent 3.5.99.3 and higher. - Actually add logcheck Requires. - Give the x2goagent-virtual package a specific version, derived from the x2goserver version. - Let x2goserver-x2goagent conflict with the former x2goagent package. - Let x2goserver depend upon its own x2goserver-virtual package for now. The release after that can drop the virtual package again. - Add x2goistrue to %files section. - Remove useless x2goagent-virtual Provides: and let x2goserver-x2goagent obsolete older x2goagent packages. * debian/control: - Maintainer change in package: X2Go Developers <x2go-dev(a)lists.x2go.org>. - Depend upon newer x2goagent package that now provides the x2goagent.options file. - Fix nxagent dependency. Must be version 3.5.99.3 or higher. Epoch was missing. - Dip into cold water and depend solely upon x2goserver-x2goagent in a versioned fashion. * debian/: - Remove x2goserver-x2goagent.dirs and hope it's really unneeded, because the Makefile creates these directories correctly. * debian/x2goserver-x2goagent.install: - Re-add etc/rgb file. . [ Martti Pitkänen ] * debian/po: - fi.po: update Finnish DebConf templates translation.

2 1

Bug#559: X2Go issue (in src:x2goclient) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #559 thanks Hello, we are very hopeful that X2Go issue #559 reported by you has been resolved in the new release (4.1.1.1) of the X2Go source project »src:x2goclient«. You can view the complete changelog entry of src:x2goclient (4.1.1.1) below, and you can use the following link to view all the code changes between this and the last release of src:x2goclient. http://code.x2go.org/gitweb?p=x2goclient.git;a=commitdiff;h=eef4bf3e0e618b1… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goclient. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goclient Version: 4.1.1.1-0x2go1 Status: RELEASE Date: Thu, 15 Feb 2018 21:38:31 +0100 Fixes: 408 559 1122 1209 1214 1227 Changes: x2goclient (4.1.1.1-0x2go1) RELEASED; urgency=medium . [ Mihai Moldovan ] * New upstream version (4.1.1.1): - src/pulsemanager.cpp: print out PA --version output as a debug message. - macbuild.sh: also bundle xauth binary as nxauth binary. - macbuild.sh: switch to bundling PulseAudio 11.1 since it's now available in MacPorts. - src/sshmasterconnection.cpp: don't ask for private key passphrase if auto-login merely failed due to the server denying the public key. Fixes: #1122. - src/{httpbrokerclient,onmainwindow,sshmasterconnection}.{cpp,h}: introduce new passphrase_type enum and replace the old verificationCode boolean value with that. Allows using more messages, including a new one for plain password prompts. Adapt usage accordingly. The implementation is ugly, but there's no good way around that (short of using C++11 features). The enum would really logically belong to ONMainWindow, but since we also have to use it in SshMasterConnection, that may not include onmainwindow.h to avoid a circular dependency, it has to be part of SshMasterConnection for now. - src/sshmasterconnection.cpp: query for password if it wasn't already provided. Fixes: #1122. This usually happens if auto-login is enabled, which bypasses the password prompt. If auto-login fails, authentication normally continues via challenge auth or plain passwords, but since users had no chance to input a password, such authentication will always fail. Give users a way to enter passwords, in case the auto-login failed. - src/onmainwindow.cpp: finally include version information in debug output. - res/i18n/x2goclient_*.ts: apply last change to translation files directly. - src/sshmasterconnection.cpp: error out with a useful error message in case no password has been provided when doing password authentication. - src/sshmasterconnection.cpp: don't output an empty error message if password authencation has been requested but the server does not support this mechanism. Fixes: #408. - src/onmainwindow.cpp: wrap user name for client-side mounts in quotes. Fixes: #559. Will fail with user names that contain quotes, but oh well... - {example/x2goclient-cli,src/onmainwindow.cpp}: remove hopefully obsolete HOSTNAME exporting into environment. - src/onmainwindow.cpp: remove client-side LD_LIBRARY_PATH meddling. Nothing of value is in that directory and nxproxy hasn't needed that for years. - src/settingswidgets.cpp: don't incorrectly enable whole display settings in single display setups. Let debugging mode override this behavior, though. - src/onmainwindow.cpp: pass X2GO_RANDR_XINERAMA=[yes,no] to x2gostartagent as an environment variable based upon the xinerama session setting. Has no effect when connecting to older X2Go Server versions and handles startup correctly with X2Go Server 4.1.0.0. - src/onmainwindow.cpp: fix another leaked X2goSettings object. - src/onmainwindow.cpp: rename xinerama env variable on session startup to X2GO_XINERAMA in accordance with server changes. - src/onmainwindow.cpp: supply xinerama option as another parameter to x2goresume-session on session resume. - src/sessionbutton.cpp: make button non-sensitive in bottom right part if it's editable. Fixes: #1214. - {src/{help.cpp,onmainwindow.{cpp,h}},man/man1/x2goclient.1}: reformat, whitespace fixes, split out close button slot in a separate function. - src/onmainwindow.{cpp,h}: let close button be a member variable. - src/onmainwindow.cpp: disable and enable close button during and after connection startup. - src/onmainwindow.cpp: initialize directRDP to false to be able to call slotSuspendSessFromSt () even if no session has previously been started. - src/onmainwindow.cpp: only initialize directRDP variable if platform is Linux. Fixes compile failures on Windows and OS X. - src/onmainwindow.cpp: always create close button, but either hide or show it based upon whether --closebt was provided or not. - src/onmainwindow.cpp: revert 3060183a78d8b6bd81bec9968c985c38bfd1e5c2. Being able to suspend sessions via the close button is complex and unnecessary, since in thinclient mode, for which this feature is useful, users will not be able to see the client window while a session is executing, due to it running in full screen mode. - src/onmainwindow.cpp: always enable close button, let it log out from a broker if already authenticated or close the client on click. Fixes: #1209. - man/man1/x2goclient.1: clarify what the close button now does. It either lets the user re-login to the broker or closes the client. - src/onmainwindow.cpp: correctly initialize brokerAuthentication member of ConfigFile struct. - {res/{img/png/close-button.png,resources.qrc}, src/{{onmainwindow,httpbrokerclient}.{cpp,h},help.cpp}, man/man1/x2goclient.1}: rename close button to broker logout button. Reimplement the way it is shown - disable it upon startup and only enable it after successful broker authentication. - man/man1/x2goclient.1: add missing escape signs before dash/minus characters. . [ Oleksandr Shneyder ] * New upstream version (4.1.1.1): - Change echo mode for user input in InteractionDialog. . [ Walid Moghrabi ] * New upstream version (4.1.1.1): - {res/img/png/,res/resources.qrc}: add close-button.png file. - {src/{help.cpp,onmainwindow.{cpp,h}},man/man1/x2goclient.1}: add new option --closebt. Fixes: #1227. Adds a close button in the top-left client corner (maybe next to the halt button) that currently just terminates the client.

2 1

Bug#1209: X2Go issue (in src:x2goclient) has been marked as closed
by X2Go Release Manager X2Go Release Manager 15 Feb '18

15 Feb '18

close #1209 thanks Hello, we are very hopeful that X2Go issue #1209 reported by you has been resolved in the new release (4.1.1.1) of the X2Go source project »src:x2goclient«. You can view the complete changelog entry of src:x2goclient (4.1.1.1) below, and you can use the following link to view all the code changes between this and the last release of src:x2goclient. http://code.x2go.org/gitweb?p=x2goclient.git;a=commitdiff;h=eef4bf3e0e618b1… If you feel that the issue has not been resolved satisfyingly, feel free to reopen this bug report or submit a follow-up report with further observations described based on the new released version of src:x2goclient. Thanks a lot for contributing to X2Go!!! light+love X2Go Git Admin (on behalf of the sender of this mail) --- X2Go Component: src:x2goclient Version: 4.1.1.1-0x2go1 Status: RELEASE Date: Thu, 15 Feb 2018 21:38:31 +0100 Fixes: 408 559 1122 1209 1214 1227 Changes: x2goclient (4.1.1.1-0x2go1) RELEASED; urgency=medium . [ Mihai Moldovan ] * New upstream version (4.1.1.1): - src/pulsemanager.cpp: print out PA --version output as a debug message. - macbuild.sh: also bundle xauth binary as nxauth binary. - macbuild.sh: switch to bundling PulseAudio 11.1 since it's now available in MacPorts. - src/sshmasterconnection.cpp: don't ask for private key passphrase if auto-login merely failed due to the server denying the public key. Fixes: #1122. - src/{httpbrokerclient,onmainwindow,sshmasterconnection}.{cpp,h}: introduce new passphrase_type enum and replace the old verificationCode boolean value with that. Allows using more messages, including a new one for plain password prompts. Adapt usage accordingly. The implementation is ugly, but there's no good way around that (short of using C++11 features). The enum would really logically belong to ONMainWindow, but since we also have to use it in SshMasterConnection, that may not include onmainwindow.h to avoid a circular dependency, it has to be part of SshMasterConnection for now. - src/sshmasterconnection.cpp: query for password if it wasn't already provided. Fixes: #1122. This usually happens if auto-login is enabled, which bypasses the password prompt. If auto-login fails, authentication normally continues via challenge auth or plain passwords, but since users had no chance to input a password, such authentication will always fail. Give users a way to enter passwords, in case the auto-login failed. - src/onmainwindow.cpp: finally include version information in debug output. - res/i18n/x2goclient_*.ts: apply last change to translation files directly. - src/sshmasterconnection.cpp: error out with a useful error message in case no password has been provided when doing password authentication. - src/sshmasterconnection.cpp: don't output an empty error message if password authencation has been requested but the server does not support this mechanism. Fixes: #408. - src/onmainwindow.cpp: wrap user name for client-side mounts in quotes. Fixes: #559. Will fail with user names that contain quotes, but oh well... - {example/x2goclient-cli,src/onmainwindow.cpp}: remove hopefully obsolete HOSTNAME exporting into environment. - src/onmainwindow.cpp: remove client-side LD_LIBRARY_PATH meddling. Nothing of value is in that directory and nxproxy hasn't needed that for years. - src/settingswidgets.cpp: don't incorrectly enable whole display settings in single display setups. Let debugging mode override this behavior, though. - src/onmainwindow.cpp: pass X2GO_RANDR_XINERAMA=[yes,no] to x2gostartagent as an environment variable based upon the xinerama session setting. Has no effect when connecting to older X2Go Server versions and handles startup correctly with X2Go Server 4.1.0.0. - src/onmainwindow.cpp: fix another leaked X2goSettings object. - src/onmainwindow.cpp: rename xinerama env variable on session startup to X2GO_XINERAMA in accordance with server changes. - src/onmainwindow.cpp: supply xinerama option as another parameter to x2goresume-session on session resume. - src/sessionbutton.cpp: make button non-sensitive in bottom right part if it's editable. Fixes: #1214. - {src/{help.cpp,onmainwindow.{cpp,h}},man/man1/x2goclient.1}: reformat, whitespace fixes, split out close button slot in a separate function. - src/onmainwindow.{cpp,h}: let close button be a member variable. - src/onmainwindow.cpp: disable and enable close button during and after connection startup. - src/onmainwindow.cpp: initialize directRDP to false to be able to call slotSuspendSessFromSt () even if no session has previously been started. - src/onmainwindow.cpp: only initialize directRDP variable if platform is Linux. Fixes compile failures on Windows and OS X. - src/onmainwindow.cpp: always create close button, but either hide or show it based upon whether --closebt was provided or not. - src/onmainwindow.cpp: revert 3060183a78d8b6bd81bec9968c985c38bfd1e5c2. Being able to suspend sessions via the close button is complex and unnecessary, since in thinclient mode, for which this feature is useful, users will not be able to see the client window while a session is executing, due to it running in full screen mode. - src/onmainwindow.cpp: always enable close button, let it log out from a broker if already authenticated or close the client on click. Fixes: #1209. - man/man1/x2goclient.1: clarify what the close button now does. It either lets the user re-login to the broker or closes the client. - src/onmainwindow.cpp: correctly initialize brokerAuthentication member of ConfigFile struct. - {res/{img/png/close-button.png,resources.qrc}, src/{{onmainwindow,httpbrokerclient}.{cpp,h},help.cpp}, man/man1/x2goclient.1}: rename close button to broker logout button. Reimplement the way it is shown - disable it upon startup and only enable it after successful broker authentication. - man/man1/x2goclient.1: add missing escape signs before dash/minus characters. . [ Oleksandr Shneyder ] * New upstream version (4.1.1.1): - Change echo mode for user input in InteractionDialog. . [ Walid Moghrabi ] * New upstream version (4.1.1.1): - {res/img/png/,res/resources.qrc}: add close-button.png file. - {src/{help.cpp,onmainwindow.{cpp,h}},man/man1/x2goclient.1}: add new option --closebt. Fixes: #1227. Adds a close button in the top-left client corner (maybe next to the halt button) that currently just terminates the client.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev