x2go-dev

x2go-dev@lists.x2go.org

5400 discussions

Integration of X2Go client (again)
by Stefan Baur 02 Dec '11

02 Dec '11

Hi List, does anyone know what needs to be done so that the X2Go client (http://wiki.x2go.org/wiki:components:x2goclient#download) could be added to Thinstation (http://www.thinstation.org/)? Thinstation supports a wide range of remote desktop solutions, it's a bit of a shame that X2Go isn't among them. Note: I had sent a similarly-worded message to the x2go-dev mailing list, where it was suggested that I ask the same question on the thinstation-developer list, with a pointer to the x2go-dev mailing list. The x2go-developers (notably Mike Gabriel) are, and I quote, "very open to an integration and will give support with whatever necessary..." This is not sent as a crosspost, but rather as two individual posts, as both lists require a subscription and I don't want to trigger a bounce flood. ;-) To subscribe to x2go-dev, go here: https://lists.berlios.de/mailman/listinfo/x2go-dev To subscribe to thinstation-developer, go here: https://lists.sourceforge.net/lists/listinfo/thinstation-developer Kind Regards, Stefan

2 1

Some feature requests for x2go-client (Windows), while we're at it...
by Stefan Baur 02 Dec '11

02 Dec '11

Hi List, I'd like to suggest two changes to the X2go Windows client, though they might make sense for the MacOS X and Linux Clients (when used on a "fat" Linux client) as well: 1) UI change: When the x2go-client is *not* used in thin-client mode, the session selection screen should not fill the entire screen. It should be the size of a single session item, like in the vertical bar on the right, or similar in size to the Nomachine NX client login screen. I fully understand that you need a screen-filling display mode when running on a thin client, so maybe there should be a command line option to select which UI mode is needed, and make the smaller one the default on Windows (and possibly Mac OS X as well) at compile-time. 2) Behavioral change: When a session is active, the Windows 7 task bar shows two windows: The remote desktop/application, as well as the session selection screen. In my opinion, the session selection screen should be hidden when a successful connection has been established. It should only pop up again if the session was terminated due to an error (application crash, loss of network connection, etc.). Again, this is similar to how NoMachine NX clients handle this. Just my 0,015 EUR. Kind Regards, Stefan

4 4

Thinstation and X2Go
by Stefan Baur 01 Dec '11

01 Dec '11

Hi List, does anyone know what needs to be done so that the X2Go client could be added to Thinstation (http://www.thinstation.org/)? They support a wide range of remote desktop solutions, it's a bit of a shame that X2Go isn't among them. Kind Regards, Stefan

3 2

Change Title of Frontend of Pyhoca
by Edwin Hernán Hurtado Cruz 01 Dec '11

01 Dec '11

Hi. I like to know how to change the title of the window of the frontend of pyhoca, to show only the user and the ip address or server Thank you so much El hombre, así como el software, debe ser libre. GNU es libertad. Linux user #461462 Escuchad mi palabra, un nuevo mandamiento os doy: "Derribad las naciones, con tolerancia y golpes de amor"

6 15

session icon in pyhoca-gui
by Mike Gabriel 30 Nov '11

30 Nov '11

Hi all, I have just decided to remove the session icon widget from the pyhoca-gui profile manager dialog. In pyhoca-gui the session icon is not used anyway and I do not plan to use it in the near future... This change does not have an effect on x2goclient and its session profile icons... Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

Another x2go client error on Windows (and weird UI design)
by Stefan Baur 30 Nov '11

30 Nov '11

Hi List, whenever I end a session, I somehow need to confirm this by having to click the button on the right in the session selection screen, which I find awkward, compared to how NoMachine simply closes the session when the remote application/desktop is closed. Then, another Window pops up warning me that all unsaved data will be lost and asks me to confirm this. This seems rather silly, as at this moment, there's nothing I could do to change this - there is no application window, no desktop, where I could click "save" - after all, I just intentionally closed all these windows! Now, if I click on "OK", the window disappears and I'm seeing the session selection screen again, where I still/again have the option to click the button I just clicked before. It seems to take a few seconds before anything happens and the session is properly terminated - if I click the button before that, the x2go client becomes unstable and crashes most of the time I tried this (usually when the popup appears for the second time). Kind Regards, Stefan

1 0

Error installing X2go on Debian Lenny (Oldstable)
by Stefan Baur 29 Nov '11

29 Nov '11

Hi guys, I was more or less forced to try an X2go install on Lenny (Debian oldstable). The sources.list contains the following X2go-specific entries: # X2go Repository deb http://packages.x2go.org/debian lenny main # X2go Repository (sources) deb-src http://packages.x2go.org/debian lenny main The following messages show up during my install attempt (which fails): apt-get install x2goserver Reading package lists... Done Building dependency tree Reading state information... Done x2goserver is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up x2goserver (3.0.99.8-0~x2go-bpo1+lenny~main~385~build1) ... Group x2gouser already exists. User x2gouser already exists. Can't locate x2gologlevel.pm in @INC (@INC contains: /lib/x2go /etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/sbin/x2godbadmin line 30. BEGIN failed--compilation aborted at /usr/sbin/x2godbadmin line 30. dpkg: error processing x2goserver (--configure): subprocess post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of x2goserver-extensions: x2goserver-extensions depends on x2goserver (>= 3.0.99.8-0~x2go-bpo1+lenny~main~385~build1); however: Package x2goserver is not configured yet. x2goserver-extensions depends on x2goserver (<< 3.0.99.8-0~x2go-bpo1+lenny~main~385~build1.1~); however: Package x2goserver is not configured yet. dpkg: error processing x2goserver-extensions (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: x2goserver x2goserver-extensions E: Sub-process /usr/bin/dpkg returned an error code (1) Any ideas as to what is causing this problem? Kind Regards, Stefan

2 1

[SOLVED] x2goserver installation on Debian lenny
by Mike Gabriel 28 Nov '11

28 Nov '11

Hi all, with the latest Debian lenny backport of x2goserver, some problems occurred, that now have been fixed. 1. The x2gobasepath script in x2goserver was broken with Debian lenny's Perl version. This caused x2goserver installation to fail on Debian lenny. This issue has been fixed now. 2. The x2godbadmin script caused some DBI errors on X2Go SQLITE db creation, this issue now also has been fixed. For those you have already tested x2goserver in lenny and encoutered a failure, please try the newest version available on deb http://package.x2go.org/debian lenny main Please report feedback on this list (and not to me privately!), Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

X2Go Desktop Sharing - Client "Access denied to user"
by Devon 26 Nov '11

26 Nov '11

G'day, Can use X2Go Client to connect to X2Go remote server, via RSA key in a regular session (KDE). When using the client in a "Connect to remote destop" session, the "access denied to user" error appears. Is this a permission error? Cheers

2 1

Problem with windows x2go client 3.99.0.1
by vasek＠spsmb.cz 25 Nov '11

25 Nov '11

Hello, x2go client 3.99.0.1 (and 3.99.0.0 and 3.01.18) is not working under windows 7. Session is established but connection timeout. On the server side in log: sshd[1903]: error: connect_to localhost port 30001: failed. I use debian squeeze and x2go server from http://packages.x2go.org/debian. 3.01.18 under ubuntu with no problem Where is the problem?

7 18

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

x2go-dev