A page in your DokuWiki was added or changed. Here are the details: Date : 2017/11/20 11:13 Browser : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 Goanna/3.4 Firefox/52.9 PaleMoon/27.6.0 IP-Address : 134.3.37.90 Hostname : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1511176209 New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: User : stefanbaur @@ -753,9 +753,9 @@ * ''ldap=ldap.example.com:389:cn=cngoeshere,dc=example,dc=com'' - this allows you to specify an LDAP server to connect to - note that this is not needed for LDAP-based authentication, only when you intend to store entire session profiles in LDAP. You should really consider using the X2Go Session Broker instead. * ''ldap1=ldap-backupserver-1.example.com:389'' - this allows you to specify the first of up to two LDAP backup servers when using LDAP authentication * ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication * ''nodpms'' - Will not touch DPMS settings at all (by default, ''blank=0'' does both ''xset s off'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings. - * ''nomagicpixel=1'' or ''nomagicpixel=2' - you should set ''nomagicpixel=1'' while the "magic pixel" (clicking in the upper right corner of the screen will minimize a fullscreen session) is still active in thinclient mode (this feature is expected to be disabled at some point in the future). ''nomagicpixel=1'' will disable the window manager when exactly 3 windows are detected (that's the usual situation when a fullscreen session is active). It will re-enable openbox whenever more or less than 3 windows are detected. If this fails for you, you can try ''nomagicpixel=2'', which will try to trigger on the window-minimize command and restore it to fullscreen. Note that ''nomagicpixel=2'' is known to cause problems when trying to run the actual X2Go-TCE client as a virtual machine guest (the //X2GoServer// you connect to may be a VM guest, no problems there). To live with the magic pixel bug, simply do not add this option at all. + * ''nomagicpixel=1'' or ''nomagicpixel=2'' - you should set ''nomagicpixel=1'' while the "magic pixel" (clicking in the upper right corner of the screen will minimize a fullscreen session) is still active in thinclient mode (this feature is expected to be disabled at some point in the future). ''nomagicpixel=1'' will disable the window manager when exactly 3 windows are detected (that's the usual situation when a fullscreen session is active). It will re-enable openbox whenever more or less than 3 windows are detected. If this fails for you, you can try ''nomagicpixel=2'', which will try to trigger on the window-minimize command and restore it to fullscreen. Note that ''nomagicpixel=2'' is known to cause problems when trying to run the actual X2Go-TCE client as a virtual machine guest (the //X2GoServer// you connect to may be a VM guest, no problems there). To live with the magic pixel bug, simply do not add this option at all. * ''pubkey=tftp|http|https|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.authorized_keys'' - Allows you to add an ssh public key file to the ThinClient, so your administrators can log in remotely using SSH. Note that this file needs to be chmodded 644, not 600, on the web server. **Attention: Whoever manages to spoof this server name will have root access to your ThinClients. Using HTTPS will mitigate this - an attacker would not only have to spoof the server name, but also the matching certificate.** * ''session=sessionname'' - use this to specify a session by name that should be pre-selected on startup. The name must be listed in the sessions file and may only contain characters from the following charset: //a-zA-Z0-9.:/ _-// (We suggest naming the default session ''default'' and using ''session=default''.) When using a session name with blanks, please enclose the sessionname in either single or double quotes, like so: ''session="session name"'' / ''session='session name''' * ''tcpprint'' - Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a laptop roaming between different networks. **Attention:** When used without ''tcpprintonlyfrom'' (see below), this means anyone that can reach your thin client via e.g. ping can also send print jobs to it! * ''tcpprintonlyfrom=x.x.x.x'' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. This should be the IP of your CUPS server or whatever print server system you use. Understands the same syntax as xinetd's ''only_from''. -- This mail was generated by DokuWiki at https://wiki.x2go.org/