x2go-commits

x2go-commits@lists.x2go.org

1 participants
37901 discussions

[[X2Go Wiki]] page changed: events:start
by wiki-admin＠x2go.org 02 Jun '25

02 Jun '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/94.0.4606.71 Safari/537.36 IP Address : 78.43.75.39 Hostname : HSI-KBW-078-043-075-039.hsi4.kabel-badenwuerttemberg.de Old Revision : https://wiki.x2go.org/doku.php/events:start?rev=1633952455 New Revision : https://wiki.x2go.org/doku.php/events:start Date of New Revision: 2021/10/11 11:54 Edit Summary : And yet another test edit ... User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -1,9 +1,9 @@ ~~SHORTURL~~ ====== Events / Workshops ====== ====== 2022 ====== - None yet. Maybe Pi and More, maybe Tuebix, maybe LinuxWochenWien, who knows … + None yet. Maybe Pi and More, maybe Chemnitzer LinuxTage, maybe Tuebix, maybe LinuxWochenWien, who knows … ====== 2021 ====== ===== Upcoming Events ===== -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 414

[[X2Go Wiki]] page changed: start
by wiki-admin＠x2go.org 17 May '25

17 May '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/104.0.5112.101 Safari/537.36 IP Address : 78.43.74.240 Hostname : ip-078-043-074-240.um18.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/start?rev=1661769412 New Revision : https://wiki.x2go.org/doku.php/start Date of New Revision: 2022/08/29 15:38 Edit Summary : old revision restored (2022/08/25 09:31) User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -1,12 +1,6 @@ ~~NOTOC~~ ====== X2Go - everywhere@home ====== - <WRAP round warning> - ===== Outage Notice ===== - **Attention:** The server hosting code.x2go.org (this affects both our git repository as well as our package repository) and lists.x2go.org (where we host our mailing lists) is currently down. - We are working to get the issue resolved by the afternoon (2022-08-29 around 22:00 CEST, possibly later). - Please check this wiki page for updates. We will remove this notice once the services are back up. - </WRAP> <WRAP round important> ===== Donations welcome ===== X2Go is a project under the umbrella of the [[https://www.orca-ev.de|Open Remote Computing Association - orca e.V.]] - a [[https://en.wikipedia.org/wiki/Registered_association_(Germany)|registered association]] under [[https://en.wikipedia.org/wiki/B%C3%BCrgerliches_Gesetzbuch|Germanys Civil Code]] and also registered as a charitable organization, similar to a [[https://en.wikipedia.org/wiki/501(c)(3)_organization|501(c)(3) organization]] in the US. As such, it is not only possible to donate money to X2Go via orca e.V., but the donations are also tax deductible for German tax subjects. -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 65

Mailman 3.x upgrade
by Mihai Moldovan 14 May '25

14 May '25

Hi This is a mass mail to all X2Go lists. During the past few weeks, I have upgraded the mailing list infrastructure from Mailman 2.1 to Mailman 3.0. All subscriptions and archived messages have been imported. Users will NOT need to resubscribe and will continue to get mails. Apologies for the long downtime, but especially the archive imports took weeks to complete and had to be done twice, since the backend used in the first run wasn't suited to the load and amount of data. Unfortunately, the machine is struggling with the load, and web UI operations sometimes take quite long to complete or even time out completely. Just try to refresh and retry the last operation if you see this happening. We will probably want to upgrade this machine in the future. I'll split this mail up into a user, an administrator and a technical part. Feel free to skip the parts that do not interest you. ************************ * USER-VISIBLE CHANGES * ************************ The old Mailman 2.1 infrastructure was quite basic - consisting of a mostly static HTML-based web interface and statically generated HTML pages for each message in the archives. By contrast, Mailman 3.x is much more complex. The web interface is more fancy and also uses Javascript, the archiver is a separate component known as Hyperkitty and everything is plugged together via a Python-based Django uwsgi web service communicating with an internal REST service. Most importantly, you will have to register to the Django-powered Postorius service to manage your subscriptions. Management is now centralized and you won't get password reminders every month for each individual list. To see a list of all public lists, head to https://lists.x2go.org/postorius/lists/ ( https://lists.x2go.org/ will redirect there). To create an account, use the "Sign Up" button/link in the upper right corner of the page. After you have created an account, you will be able to modify all your subscriptions in one place and all your subscriptions should show up automatically (provided the account you signed up for uses the same email address as your subscriptions). This includes setting digest options, pausing mail transfer, subscribing and unsubscribing. If you do not wish to create an account, you can still join or leave mailing lists by sending messages to nameoflist-join(a)lists.x2go.org or nameoflist-leave(a)lists.x2go.org. nameoflist-subscribe(a)lists.x2go.org and nameoflist-unsubscribe(a)lists.x2go.org are aliases that also work. In this case, you will, however, be unable to change other options. Archives can be found at https://lists.x2go.org/hyperkitty - note that if you're logged in to Postorius, you will also be automatically logged in to Hyperkitty. The archives for a list can also be reached by following the Archive link/button in Postorius's mailing list info page. In order not to break old links, the old archive is also still accessible at https://lists.x2go.org/pipermail/ - albeit in a read-only state that will not be updated any longer. I have added information to the index pages to reflect that. ************************** * ADMINISTRATION CHANGES * ************************** Mailman 3.x allows making users administrators or owners of lists, which can then change settings, tend to held messages and the like. Historically, in Mailman 2.1, administration was based upon a password. I have created a super user account named listadmins(a)lists.x2go.org with the known password. This user is owner of all lists and can be used to manage every aspect. As soon as you are logged in to an account that is either and administrator or owner of one or multiple lists, you can use Postorius ( https://lists.x2go.org/postorius/lists ) to manage settings, held messages and the like. Especially the "held message" interface deserves a bit of explanation. By default, 10 messages are shown per page. Each message can be selected/ticked individually or you can all select all messages in a page at once by using the checkbox left of "Subject" in the table header. Clicking the buttons "Accept", "Reject" or "Discard" will carry out the appropriate action on all selected messages. Note, however, that this will not add the sender to any of the auto-accept, auto-reject or auto-discard lists. In order to also add the sender of a message to a specific auto-action list, click on a message. A javascript-based popup will appear with the whole message text. The popup might not show up instantly, especially if the machine is slow, so please wait after clicking on message! If you get an error about the message not existing, refresh the page and retry. The popup includes two buttons at the bottom to show either the full source of the message or just the headers, which can be very handy. Above the "Rejection reason" text box, a "--- Set member moderation ---" drop down menu can be used to select the desired auto action (hold, reject, discard, accept or default processing). After setting this correctly, use any of the "Accept", "Reject" or "Discard" buttons below the text box to submit the result and carry out the desired action. Django has a special admin interface at https://lists.x2go.org/admin that can be used to manage data in Hyperkitty (the archiver), for instance to delete messages from the archive. Usually, you will not need to use this admin interface. ************************* * TECHNICAL INFORMATION * ************************* Unfortunately, Mailman 3.x is horribly broken by default in Ubuntu 24.04 (c.f., https://bugs.launchpad.net/ubuntu/+source/mailman-suite/+bug/2062960 and other bug reports). The mailman version is too old to be compatible with dependencies it needs, leading to a non-working setup out of the box. Upstream recommends installing mailman via a Python venv, but that would essentially decouple it from the system (and system updates), which I don't like. For this reason, I backported a lot of code to fix the Mailman 3 as installed via the distro packages. However, I've only done so purely on the file system and haven't created modified .deb packages. Please be extra careful when upgrading ymir and please don't update any packages related to Django, Mailman, Hyperkitty or Xapian! This will undo all of my changes and break the whole mailing list infrastructure. I plan on backporting newer versions from Debian Testing or Unstable to Ubuntu 24.04/noble in a proper .deb-based way, but that's not something I can easily do right away. Initially, I set up Mailman and Hyperkitty to use SQLite3 as its database backened, but that turned out to be excruciatingly slow. It's now using the PostgreSQL 16 backend, which works better, but also uses quite a bit of system memory, so the machine's swap space is always in use. When upgrading PostgreSQL in the future, the databases will also need to be migrated correctly. Hyperkitty can optionally use a full-text search engine to provide better search capabilities. Initially, I used Whoosh, but it turned out to be rather resource hungry and, unfortunately, also slow. We're now using Xapian with a fix for long terms, which unfortunately has not been applied upstream yet. ( https://github.com/notanumber/xapian-haystack/pull/238 ) I've enabled Markdown rendering mode in Hyperkitty for x2go-announcements, x2go-dev, x2go-user, x2go-user and x2go-i18n. This crashed badly on some mails yesterday, but should now fall back correctly to the basic text renderer in case of failures. Mihai

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 05 May '25

05 May '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1745142018 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2025/04/20 09:41 Edit Summary : [Live-Patching the Build] x2gothinclient-minidesktop_start: changed tag from code to file for easier copy-pasting User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -258,9 +258,9 @@ You will need to create a directory structure like <code>./patch/includes.chroot/etc/</code> to create/overwrite a file in <code>/etc/</code> within the live environment. e.g. to override <code>/etc/x2go/x2gothinclient-minidesktop_start</code> with a custom version, run <code>mkdir -p ./patch-minidesktop/includes.chroot/etc/x2go/</code> and save the following file as <code>./patch-minidesktop/includes.chroot/etc/x2go/x2gothinclient-minidesktop_start</code> - <code> + <file - x2gothinclient-minidesktop_start> #!/bin/bash # Copyright (C) 2010-2024 by X2Go project, https://wiki.x2go.org # Oleksandr Shneyder <o.shneyder(a)phoca-gmbh.de> @@ -311,9 +311,9 @@ --no-session-edit \ --add-to-known-hosts \ & - </code> + </file> ==== Starting the Build ==== In the directory where you want to save your builds, save the following file as x2go-tce-build, and run it (e.g. via //sudo bash ./x2go-tce-build//): <code> #!/bin/bash -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 32

[[X2Go Wiki]] page added: doc:howto:tce:branding-with-placeholders-svg
by wiki-admin＠x2go.org 01 May '25

01 May '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64; rv:115.0) Gecko/20100101 Goanna/6.7 Firefox/115.0 PaleMoon/33.7.0 IP Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Old Revision : --- New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce:branding-with-placeholders-svg Date of New Revision: 2025/05/01 18:59 Edit Summary : created User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. This is a sample branding SVG with placeholders. <file - branding-with-placeholders.svg> <?xml version="1.0" encoding="UTF-8" standalone="no"?> <svg viewBox="0 0 1700 850" height="850" width="1700" id="svg2" version="1.1" sodipodi:docname="branding-with-placeholders.svg" inkscape:version="1.2.2 (b0a8486541, 2022-12-01)" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns="http://www.w3.org/2000/svg" xmlns:svg="http://www.w3.org/2000/svg" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/"> <sodipodi:namedview id="namedview32" pagecolor="#ffffff" bordercolor="#666666" borderopacity="1.0" inkscape:showpageshadow="2" inkscape:pageopacity="0.0" inkscape:pagecheckerboard="0" inkscape:deskcolor="#d1d1d1" showgrid="false" inkscape:zoom="0.43057996" inkscape:cx="865.11225" inkscape:cy="856.98368" inkscape:window-width="1912" inkscape:window-height="990" inkscape:window-x="0" inkscape:window-y="0" inkscape:window-maximized="1" inkscape:current-layer="svg2" /> <metadata id="metadata8"> <rdf:RDF> <cc:Work rdf:about=""> <dc:format>image/svg+xml</dc:format> <dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> </cc:Work> </rdf:RDF> </metadata> <defs id="defs6"> <rect x="79.565971" y="56.660061" width="323.89688" height="181.24413" id="rect113" /> </defs> <rect style="opacity:1;vector-effect:none;fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#efefef;stroke-width:0.701608;stroke-linecap:square;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" id="rect176" width="1706.3118" height="846.03717" x="0.35080391" y="0.35080391" /> <text xml:space="preserve" transform="matrix(7.3237057,0,0,10.101999,-592.76824,-407.5383)" id="text111" x="85.0" y="60.357948" style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:16px;line-height:125%;font-family:monospace;-inkscape-font-specification:'monospace Bold';letter-spacing:0px;word-spacing:0px;white-space:pre;shape-inside:url(#rect113);fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"><tspan x="85.0" y="76.547033" id="tspan192">B: BOOTEDENVPLACEHOLDER</tspan></text> <text xml:space="preserve" transform="matrix(7.3237057,0,0,10.101999,-592.76824,-407.5383)" id="text72" style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:16px;line-height:125%;font-family:monospace;-inkscape-font-specification:'monospace Bold';letter-spacing:0px;word-spacing:0px;white-space:pre;shape-inside:url(#rect113);fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" x="85.0" y="80.0"><tspan x="85.0" y="76.547033" id="tspan196">V: TIMESTAMPPLACEHOLDER</tspan></text> <text xml:space="preserve" transform="matrix(7.3237057,0,0,10.101999,-587.30251,-407.5383)" id="text76" style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:16px;line-height:125%;font-family:monospace;-inkscape-font-specification:'monospace Bold';letter-spacing:0px;word-spacing:0px;white-space:pre;shape-inside:url(#rect113);fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" x="85.0" y="100.0"><tspan x="85.0" y="76.547033" id="tspan200">I: IPPLACEHOLDER</tspan></text> <text xml:space="preserve" transform="matrix(7.3237057,0,0,10.101999,-589.955,-407.5383)" id="text78" style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:16px;line-height:125%;font-family:monospace;-inkscape-font-specification:'monospace Bold';letter-spacing:0px;word-spacing:0px;white-space:pre;shape-inside:url(#rect113);fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" x="85.0" y="118.0"><tspan x="85.0" y="76.547033" id="tspan202">M: MACPLACEHOLDER</tspan></text> </svg> </file> -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] file uploaded: events:lita2025-2025-04-26-190829_001.jpeg
by wiki-admin＠x2go.org 27 Apr '25

27 Apr '25

A file was uploaded to your DokuWiki. Here are the details: File : https://wiki.x2go.org/lib/exe/fetch.php/events:lita2025-2025-04-26-190829_0… Old revision: --- Date : 2025/04/27 06:34 Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP-Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Size : 385.8 KB MIME Type : jpeg User : stefanbaur -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] file uploaded: events:lita2025-2025-04-26-190829_002.jpeg
by wiki-admin＠x2go.org 27 Apr '25

27 Apr '25

A file was uploaded to your DokuWiki. Here are the details: File : https://wiki.x2go.org/lib/exe/fetch.php/events:lita2025-2025-04-26-190829_0… Old revision: --- Date : 2025/04/27 06:34 Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/135.0.0.0 Safari/537.36 IP-Address : 91.89.35.26 Hostname : ip-091-089-035-026.um28.pools.vodafone-ip.de Size : 269.7 KB MIME Type : jpeg User : stefanbaur -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 24 Apr '25

24 Apr '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/105.0.0.0 Safari/537.36 IP Address : 78.43.74.240 Hostname : ip-078-043-074-240.um18.pools.vodafone-ip.de Old Revision : https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1611533954 New Revision : https://wiki.x2go.org/doku.php/doc:howto:tce Date of New Revision: 2022/09/21 10:59 Edit Summary : Typofix User : stefanbaur There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -946,9 +946,9 @@ === These are entirely optional === * ''audioout=list'' / ''audioout="alsa_card.something|output:something"'' - use this to list all available audio outputs / select a particular audio output. Note that when selecting one, the parameter consists of two values (as displayed in the output on /dev/tty8 when specifying ''list'') that need to be separated with a ''|'', and the set of the two values needs to be enclosed in double quotes. Do //not// enclose each value in double quotes separately! Correct example: ''audioout="alsa_card.pci-0000_00_1b.0|output:hdmi-stereo"'' * ''bg=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-bg.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the blue background theme of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. All values are given in seconds. - * ''blankdpmsfix'' - This forces the TFT do black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) + * ''blankdpmsfix'' - This forces the TFT to black for a few seconds during the X startup phase, then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. (feature available via github repo, soon via x2go repo too) * ''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg'' - use this to specify an SVG file to "brand" your X2Go-TCE with. It will replace the seal icon in the lower left of the login screen. See below for how to add this file to your HTTP, HTTPS, or FTP server. **Attention: Whoever manages to spoof the server name can inject rogue images into your ThinClients.** To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate. * ''copysecring'' - this will scan for USB media and fixed disk media (with USB media taking precedence) at boot for one or more of the following directories: ''config/ssh'', 'ssh', ''.ssh''. The volume must be labeled ''X2GO-TCE-LIVE'' or ''PORTABLEAPP'' and may use any supported file system. Any SSH Secret Keys found there will be copied into ''/home/user/.ssh'' (in the ramdisk), with proper permissions and ownerships for the default user account. This may come in handy when you are using SSH Secret Keys on USB media, but need to log in and out of sessions often, and don't want to leave the USB media plugged in all the time/don't want to have to re-insert it before each session startup. **Attention: This poses a security risk when other people are using your ThinClient afterwards (as they will have access to your keys).** To mitigate this risk,be sure to power-cycle the ThinClient once you are done. You //should// specify this parameter when booting X2Go-TCE-Live from portable media when you want to use SSH Secret Keys, to make sure your secret key on the FAT/NTFS partition is available. But as stated above, be sure to power-cycle the machine once you're done. * ''earlyblankdpmsfix'' - This forces the TFT do black for a few seconds during the initial boot phase (right after the squashfs was downloaded), then forces it back on again. This fixes an occasional "black screen" issue that occurs with some flaky client/TFT hardware combinations when using DisplayPort connectors, and could otherwise only be remediated by manually turning the TFT off and back on again. Earlyblankdpmsfix can also be called as ''earlyblankdpmsfix=nnnn'', where ''nnnn'' is the blanking time in milliseconds (so, ''earlyblankdpmsfix=1500'' equals 1.5 seconds). (feature available via github repo, soon via x2go repo too) * ''homepageurl="URL1[|URL2|URLn]"'' - this is only available in MiniDesktop mode. It allows you to specify one or more web pages that show up on Browser start/when clicking the "Home" icon. URLs need to be separated with a ''|'', and the set of URLs needs to be enclosed in double quotes. Do //not// enclose each URL in double quotes separately! Correct example: ''homepageurl="https://www.google.de|https://wiki.x2go.org"'' -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 36

[[X2Go Wiki]] page changed: wiki:development:sessions-file
by wiki-admin＠x2go.org 09 Apr '25

09 Apr '25

A page in your DokuWiki was added or changed. Here are the details: Browser : Mozilla/5.0 (X11; Linux x86_64; rv:137.0) Gecko/20100101 Firefox/137.0 IP Address : 188.210.59.46 Hostname : 046-059-210-188.ip-addr.inexio.net Old Revision : https://wiki.x2go.org/doku.php/wiki:development:sessions-file?rev=1437748003 New Revision : https://wiki.x2go.org/doku.php/wiki:development:sessions-file Date of New Revision: 2025/04/09 19:00 Edit Summary : User : slatian There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page. @@ -3,9 +3,9 @@ Default path name * Linux, Mac OS X: ''$HOME/.x2goclient/sessions'' * Windows X2GoClient (non-portable mode): session profiles are stored in the Windows registry (''HKEY_CURRENT_USER\Software\Obviously Nice\x2goclient\sessions'') - * Windows X2GoClient (portable mode): session profiles are stored in a file (location???) + * Windows X2GoClient (portable mode): session profiles are stored in a file: The one specified on the command line, or ''%LOCALAPPDATA%\VirtualStore\x2go_sessions.txt'' if you made manual changes using the UI. (Make sure to use CRLF line endings and the correct encoding.) * Windows PyHoca-GUI: session profiles are stored in the file (''%USERPROFILE%\.x2goclient\sessions'') Related command line options: -- This mail was generated by DokuWiki at https://wiki.x2go.org/

1 0

Build failed in Jenkins: x2goclient+nightly+debian-sid #735
by jenkins＠x2go.org 09 Apr '25

09 Apr '25

See <https://jenkins.x2go.org:8443/job/x2goclient+nightly+debian-sid/735/display…> Changes: [ionic] src/{httobrokerclient.{cpp,h},onmainwindow.cpp}: parse password change result when changing password via HTTP broker. ------------------------------------------ [...truncated 180.72 KiB...] Setting up libwacom-common (2.14.0-1) ... Setting up libxkbcommon0:amd64 (1.7.0-2) ... Setting up libwayland-client0:amd64 (1.23.1-3) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up x11proto-dev (2024.1-1) ... Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up libxcb-dri3-0:amd64 (1.17.0-2+b1) ... Setting up libllvm19:amd64 (1:19.1.7-3) ... Setting up libx11-xcb1:amd64 (2:1.8.12-1) ... Setting up libice6:amd64 (2:1.1.1-1) ... Setting up gettext (0.23.1-1) ... Setting up libclang1-19 (1:19.1.7-3) ... Setting up libxau-dev:amd64 (1:1.0.11-1) ... Setting up libxpm4:amd64 (1:3.5.17-1+b3) ... Setting up qt5-qmake:amd64 (5.15.15+dfsg-5) ... Setting up libxrender1:amd64 (1:0.9.12-1) ... Setting up libtool (2.5.4-4) ... Setting up python3.13 (3.13.2-3) ... Setting up libwacom9:amd64 (2.14.0-1) ... Setting up fontconfig-config (2.15.0-2.2) ... Installing new version of config file /etc/fonts/conf.d/README ... Installing new version of config file /etc/fonts/fonts.conf ... Setting up libwebpdemux2:amd64 (1.5.0-0.1) ... Setting up libpng-dev:amd64 (1.6.47-1.1) ... Setting up libavahi-common3:amd64 (0.8-16) ... Setting up libjpeg-dev:amd64 (1:2.1.5-3.1) ... Setting up libjbig-dev:amd64 (2.1-6.1+b2) ... Setting up libxext6:amd64 (2:1.3.4-1+b3) ... Setting up python3 (3.13.2-2) ... Setting up pkgconf:amd64 (1.8.1-4) ... Setting up libxxf86vm1:amd64 (1:1.1.4-1+b4) ... Setting up libinput-bin (1.28.1-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up libldap2-dev (2.6.9+dfsg-2) ... Setting up dh-autoreconf (20) ... Setting up libxdmcp-dev:amd64 (1:1.1.5-1) ... Setting up libwebp-dev:amd64 (1.5.0-0.1) ... Setting up libfreetype6:amd64 (2.13.3+dfsg-1) ... Setting up libtiff-dev:amd64 (4.7.0-3) ... Setting up shared-mime-info (2.4-5+b2) ... Setting up libxkbcommon-x11-0:amd64 (1.7.0-2) ... Setting up libgssapi-krb5-2:amd64 (1.21.3-5) ... Setting up pkg-config:amd64 (1.8.1-4) ... Setting up libssh-4:amd64 (0.11.1-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up libdrm2:amd64 (2.4.124-2) ... Setting up groff-base (1.23.0-7) ... Setting up libharfbuzz0b:amd64 (10.2.0-1+b1) ... Setting up libfontconfig1:amd64 (2.15.0-2.2) ... Setting up libsm6:amd64 (2:1.2.6-1) ... Setting up libavahi-client3:amd64 (0.8-16) ... Setting up libdrm-amdgpu1:amd64 (2.4.124-2) ... Setting up libinput10:amd64 (1.28.1-1) ... Setting up fontconfig (2.15.0-2.2) ... Regenerating fonts cache... done. Setting up libvulkan-dev:amd64 (1.4.309.0-1) ... Setting up libxcb1-dev:amd64 (1.17.0-2+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libdrm-intel1:amd64 (2.4.124-2) ... Setting up libx11-dev:amd64 (2:1.8.12-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libqt5core5t64:amd64 (5.15.15+dfsg-5) ... Setting up libssh-dev:amd64 (0.11.1-1) ... Setting up libxpm-dev:amd64 (1:3.5.17-1+b3) ... Setting up qtattributionsscanner-qt5 (5.15.15-6) ... Setting up libxext-dev:amd64 (2:1.3.4-1+b3) ... Setting up libqt5sql5t64:amd64 (5.15.15+dfsg-5) ... Setting up libcups2t64:amd64 (2.4.10-2+b1) ... Setting up mesa-libgallium:amd64 (25.0.3-1) ... Setting up libqt5dbus5t64:amd64 (5.15.15+dfsg-5) ... Setting up libqt5sql5-sqlite:amd64 (5.15.15+dfsg-5) ... Setting up libgbm1:amd64 (25.0.3-1) ... Setting up qdoc-qt5 (5.15.15-6) ... Setting up libqt5concurrent5t64:amd64 (5.15.15+dfsg-5) ... Setting up libgl1-mesa-dri:amd64 (25.0.3-1) ... Setting up libqt5network5t64:amd64 (5.15.15+dfsg-5) ... Setting up libqt5xml5t64:amd64 (5.15.15+dfsg-5) ... Setting up debhelper (13.24.2) ... Setting up libqt5test5t64:amd64 (5.15.15+dfsg-5) ... Setting up qtbase5-dev-tools (5.15.15+dfsg-5) ... Setting up libcupsimage2t64:amd64 (2.4.10-2+b1) ... Setting up libegl-mesa0:amd64 (25.0.3-1) ... Setting up libqt5qml5:amd64 (5.15.15+dfsg-3) ... Setting up libegl1:amd64 (1.7.0-1+b2) ... Setting up libqt5qmlmodels5:amd64 (5.15.15+dfsg-3) ... Setting up libglx-mesa0:amd64 (25.0.3-1) ... Setting up libglx0:amd64 (1.7.0-1+b2) ... Setting up libgl1:amd64 (1.7.0-1+b2) ... Setting up libglx-dev:amd64 (1.7.0-1+b2) ... Setting up libgl-dev:amd64 (1.7.0-1+b2) ... Setting up libegl-dev:amd64 (1.7.0-1+b2) ... Setting up libqt5gui5t64:amd64 (5.15.15+dfsg-5) ... Setting up libglu1-mesa-dev:amd64 (9.0.2-1.1+b3) ... Setting up libqt5quick5:amd64 (5.15.15+dfsg-3) ... Setting up libqt5x11extras5:amd64 (5.15.15-2) ... Setting up libqt5widgets5t64:amd64 (5.15.15+dfsg-5) ... Setting up libqt5svg5:amd64 (5.15.15-2) ... Setting up libqt5help5:amd64 (5.15.15-6) ... Setting up libqt5quickwidgets5:amd64 (5.15.15+dfsg-3) ... Setting up libqt5svg5-dev:amd64 (5.15.15-2) ... Setting up libqt5printsupport5t64:amd64 (5.15.15+dfsg-5) ... Setting up libqt5designer5:amd64 (5.15.15-6) ... Setting up qhelpgenerator-qt5 (5.15.15-6) ... Setting up libqt5designercomponents5:amd64 (5.15.15-6) ... Setting up qtbase5-dev:amd64 (5.15.15+dfsg-5) ... Setting up qt5-assistant (5.15.15-6) ... Setting up qttools5-dev-tools (5.15.15-6) ... Setting up libqt5x11extras5-dev:amd64 (5.15.15-2) ... Setting up libcupsimage2-dev:amd64 (2.4.10-2+b1) ... Setting up libcups2-dev:amd64 (2.4.10-2+b1) ... Setting up sbuild-build-depends-x2goclient-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.41-6) ... +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.19.0-0.bpo.9-amd64 amd64 (x86_64) Toolchain package versions: binutils_2.44-3 dpkg-dev_1.22.18 g++-14_14.2.0-19 g++-6_6.5.0-2 gcc-14_14.2.0-19 gcc-6_6.5.0-2 libc6-dev_2.41-6 libstdc++-14-dev_14.2.0-19 libstdc++-6-dev_6.5.0-2 libstdc++6_14.2.0-19 linux-libc-dev_6.12.21-1 Package versions: adduser_3.150 apt_3.0.0 autoconf_2.72-3 automake_1:1.17-4 autopoint_0.23.1-1 autotools-dev_20240727.1 base-files_13.7 base-passwd_3.6.7 bash_5.2.37-1.1+b2 binutils_2.44-3 binutils-common_2.44-3 binutils-x86-64-linux-gnu_2.44-3 bsdextrautils_2.41-3 bsdutils_1:2.41-3 build-essential_12.12 bzip2_1.0.8-6 ccache_4.11.2-1 coreutils_9.6-2 cpp_4:14.2.0-1 cpp-14_14.2.0-19 cpp-14-x86-64-linux-gnu_14.2.0-19 cpp-6_6.5.0-2 cpp-x86-64-linux-gnu_4:14.2.0-1 dash_0.5.12-12 debconf_1.5.91 debhelper_13.24.2 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.1-2 diffutils_1:3.10-3 dirmngr_2.2.46-6 dpkg_1.22.18 dpkg-dev_1.22.18 dwz_0.15-1+b1 e2fslibs_1.45.6-1 e2fsprogs_1.47.2-1+b1 eatmydata_131-2 fakeroot_1.37.1.1-1 file_1:5.46-4 findutils_4.10.0-3 fontconfig_2.15.0-2.2 fontconfig-config_2.15.0-2.2 fonts-dejavu-core_2.37-8 fonts-dejavu-mono_2.37-8 g++_4:14.2.0-1 g++-14_14.2.0-19 g++-14-x86-64-linux-gnu_14.2.0-19 g++-6_6.5.0-2 g++-x86-64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-11-base_11.5.0-2 gcc-14_14.2.0-19 gcc-14-base_14.2.0-19 gcc-14-x86-64-linux-gnu_14.2.0-19 gcc-5-base_5.5.0-12 gcc-6_6.5.0-2 gcc-6-base_6.5.0-2 gcc-7-base_7.4.0-11 gcc-8-base_8.4.0-2 gcc-x86-64-linux-gnu_4:14.2.0-1 gettext_0.23.1-1 gettext-base_0.23.1-1 gnupg_2.2.46-6 gnupg-agent_2.2.46-6 gnupg-l10n_2.2.46-6 gpg_2.2.46-6 gpg-agent_2.2.46-6 gpgconf_2.2.46-6 gpgsm_2.2.46-6 gpgv_2.2.46-6 grep_3.11-4 groff-base_1.23.0-7 gzip_1.13-1 hostname_3.25 init-system-helpers_1.68 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2+b1 libapt-pkg5.0_1.8.3 libapt-pkg6.0t64_2.9.13 libapt-pkg7.0_3.0.0 libarchive-zip-perl_1.68-1 libasan3_6.5.0-2 libasan8_14.2.0-19 libassuan0_2.5.6-1 libassuan9_3.0.2-2 libatomic1_14.2.0-19 libattr1_1:2.5.2-3 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2+b2 libavahi-client3_0.8-16 libavahi-common-data_0.8-16 libavahi-common3_0.8-16 libbinutils_2.44-3 libblkid1_2.41-3 libbrotli1_1.1.0-2+b7 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.41-6 libc-dev-bin_2.41-6 libc6_2.41-6 libc6-dev_2.41-6 libcap-ng0_0.8.5-4+b1 libcap2_1:2.75-4 libcc1-0_14.2.0-19 libcilkrts5_7.4.0-11 libclang1-19_1:19.1.7-3 libcom-err2t64_1.47.0-2.3+b1 libcomerr2_1.45.6-1 libcrypt-dev_1:4.4.38-1 libcrypt1_1:4.4.38-1 libctf-nobfd0_2.44-3 libctf0_2.44-3 libcups2-dev_2.4.10-2+b1 libcups2t64_2.4.10-2+b1 libcupsimage2-dev_2.4.10-2+b1 libcupsimage2t64_2.4.10-2+b1 libdb5.3t64_5.3.28+dfsg2-9 libdbus-1-3_1.16.2-2 libdebconfclient0_0.278 libdebhelper-perl_13.24.2 libdeflate-dev_1.23-1+b1 libdeflate0_1.23-1+b1 libdouble-conversion3_3.3.1-1 libdpkg-perl_1.22.18 libdrm-amdgpu1_2.4.124-2 libdrm-common_2.4.124-2 libdrm-intel1_2.4.124-2 libdrm2_2.4.124-2 libeatmydata1_131-2+b1 libedit2_3.1-20250104-1 libegl-dev_1.7.0-1+b2 libegl-mesa0_25.0.3-1 libegl1_1.7.0-1+b2 libelf1t64_0.192-4 libencode-locale-perl_1.05-3 libevdev2_1.13.4+dfsg-1 libexpat1_2.7.1-1 libext2fs2t64_1.47.2-1+b1 libfakeroot_1.37.1.1-1 libfdisk1_2.41-3 libffi8_3.4.7-1 libfile-find-rule-perl_0.34-3 libfile-stripnondeterminism-perl_1.14.1-2 libfmt10_10.1.1+ds1-4 libfontconfig1_2.15.0-2.2 libfreetype6_2.13.3+dfsg-1 libgbm1_25.0.3-1 libgcc-14-dev_14.2.0-19 libgcc-6-dev_6.5.0-2 libgcc-s1_14.2.0-19 libgcrypt20_1.11.0-7 libgdbm-compat4t64_1.24-2 libgdbm3_1.8.3-14 libgdbm6t64_1.24-2 libgl-dev_1.7.0-1+b2 libgl1_1.7.0-1+b2 libgl1-mesa-dri_25.0.3-1 libglib2.0-0t64_2.84.1-1 libglu1-mesa_9.0.2-1.1+b3 libglu1-mesa-dev_9.0.2-1.1+b3 libglvnd0_1.7.0-1+b2 libglx-dev_1.7.0-1+b2 libglx-mesa0_25.0.3-1 libglx0_1.7.0-1+b2 libgmp10_2:6.3.0+dfsg-3 libgnutls30t64_3.8.9-2 libgomp1_14.2.0-19 libgpg-error0_1.51-4 libgprofng0_2.44-3 libgraphite2-3_1.3.14-2+b1 libgssapi-krb5-2_1.21.3-5 libgudev-1.0-0_238-6 libharfbuzz0b_10.2.0-1+b1 libhiredis1.1.0_1.2.0-6+b3 libhogweed6t64_3.10.1-1 libhwasan0_14.2.0-19 libice6_2:1.1.1-1 libicu76_76.1-3 libidn2-0_2.3.8-2 libinput-bin_1.28.1-1 libinput10_1.28.1-1 libisl15_0.18-4 libisl19_0.20-2 libisl23_0.27-1 libitm1_14.2.0-19 libjansson4_2.14-2+b3 libjbig-dev_2.1-6.1+b2 libjbig0_2.1-6.1+b2 libjpeg-dev_1:2.1.5-3.1 libjpeg62-turbo_1:2.1.5-3.1 libjpeg62-turbo-dev_1:2.1.5-3.1 libk5crypto3_1.21.3-5 libkeyutils1_1.6.3-5 libkrb5-3_1.21.3-5 libkrb5support0_1.21.3-5 libksba8_1.6.7-2+b1 liblastlog2-2_2.41-3 libldap-2.5-0_2.5.19+dfsg-1 libldap-dev_2.6.9+dfsg-2 libldap2_2.6.9+dfsg-2 libldap2-dev_2.6.9+dfsg-2 liblerc-dev_4.0.0+ds-5 liblerc4_4.0.0+ds-5 libllvm19_1:19.1.7-3 liblsan0_14.2.0-19 liblz4-1_1.10.0-4 liblzma-dev_5.8.1-1 liblzma5_5.8.1-1 libmagic-mgc_1:5.46-4 libmagic1t64_1:5.46-4 libmd0_1.1.0-2+b1 libmd4c0_0.5.2-2+b1 libmount1_2.41-3 libmpc3_1.3.1-1+b3 libmpfr4_3.1.6-1 libmpfr6_4.2.2-1 libmpx2_8.4.0-2 libmtdev1t64_1.1.7-1 libncursesw6_6.5+20250216-2 libnettle8t64_3.10.1-1 libnpth0t64_1.8-2 libnumber-compare-perl_0.03-3 libopengl-dev_1.7.0-1+b2 libopengl0_1.7.0-1+b2 libp11-kit0_0.25.5-3 libpam-modules_1.7.0-3 libpam-modules-bin_1.7.0-3 libpam-runtime_1.7.0-3 libpam0g_1.7.0-3 libpciaccess0_0.17-3+b3 libpcre2-16-0_10.45-1 libpcre2-8-0_10.45-1 libpcre3_2:8.39-15.1 libperl5.40_5.40.1-2 libpipeline1_1.5.8-1 libpkgconf3_1.8.1-4 libpng-dev_1.6.47-1.1 libpng16-16t64_1.6.47-1.1 libpython3-stdlib_3.13.2-2 libpython3.13-minimal_3.13.2-3 libpython3.13-stdlib_3.13.2-3 libqt5concurrent5t64_5.15.15+dfsg-5 libqt5core5t64_5.15.15+dfsg-5 libqt5dbus5t64_5.15.15+dfsg-5 libqt5designer5_5.15.15-6 libqt5designercomponents5_5.15.15-6 libqt5gui5t64_5.15.15+dfsg-5 libqt5help5_5.15.15-6 libqt5network5t64_5.15.15+dfsg-5 libqt5printsupport5t64_5.15.15+dfsg-5 libqt5qml5_5.15.15+dfsg-3 libqt5qmlmodels5_5.15.15+dfsg-3 libqt5quick5_5.15.15+dfsg-3 libqt5quickwidgets5_5.15.15+dfsg-3 libqt5sql5-sqlite_5.15.15+dfsg-5 libqt5sql5t64_5.15.15+dfsg-5 libqt5svg5_5.15.15-2 libqt5svg5-dev_5.15.15-2 libqt5test5t64_5.15.15+dfsg-5 libqt5widgets5t64_5.15.15+dfsg-5 libqt5x11extras5_5.15.15-2 libqt5x11extras5-dev_5.15.15-2 libqt5xml5t64_5.15.15+dfsg-5 libquadmath0_14.2.0-19 libreadline7_7.0-5 libreadline8t64_8.2-6 libsasl2-2_2.1.28+dfsg1-9 libsasl2-modules-db_2.1.28+dfsg1-9 libseccomp2_2.6.0-2 libselinux1_3.8.1-1 libsemanage-common_3.8.1-1 libsemanage2_3.8.1-1 libsensors-config_1:3.6.0-10 libsensors5_1:3.6.0-10+b1 libsepol1_3.0-1 libsepol2_3.8.1-1 libsframe1_2.44-3 libsharpyuv-dev_1.5.0-0.1 libsharpyuv0_1.5.0-0.1 libsm6_2:1.2.6-1 libsmartcols1_2.41-3 libsqlite3-0_3.46.1-2 libss2t64_1.47.0-2.3+b1 libssh-4_0.11.1-1 libssh-dev_0.11.1-1 libssl-dev_3.4.1-1 libssl3t64_3.4.1-1 libstdc++-14-dev_14.2.0-19 libstdc++-6-dev_6.5.0-2 libstdc++6_14.2.0-19 libsystemd0_257.4-9 libtasn1-6_4.20.0-2 libtext-glob-perl_0.11-3 libtiff-dev_4.7.0-3 libtiff6_4.7.0-3 libtiffxx6_4.7.0-3 libtinfo5_6.4-4 libtinfo6_6.5+20250216-2 libtool_2.5.4-4 libtsan0_11.5.0-2 libtsan2_14.2.0-19 libubsan0_7.4.0-11 libubsan1_14.2.0-19 libuchardet0_0.0.8-1+b2 libudev1_257.4-9 libunistring5_1.3-2 libunwind8_1.8.1-0.1 libustr-1.0-1_1.0.4-6.1+b1 libuuid1_2.41-3 libvulkan-dev_1.4.309.0-1 libvulkan1_1.4.309.0-1 libwacom-common_2.14.0-1 libwacom9_2.14.0-1 libwayland-client0_1.23.1-3 libwayland-server0_1.23.1-3 libwebp-dev_1.5.0-0.1 libwebp7_1.5.0-0.1 libwebpdecoder3_1.5.0-0.1 libwebpdemux2_1.5.0-0.1 libwebpmux3_1.5.0-0.1 libx11-6_2:1.8.12-1 libx11-data_2:1.8.12-1 libx11-dev_2:1.8.12-1 libx11-xcb1_2:1.8.12-1 libxau-dev_1:1.0.11-1 libxau6_1:1.0.11-1 libxcb-dri3-0_1.17.0-2+b1 libxcb-glx0_1.17.0-2+b1 libxcb-icccm4_0.4.2-1 libxcb-image0_0.4.0-2+b2 libxcb-keysyms1_0.4.1-1 libxcb-present0_1.17.0-2+b1 libxcb-randr0_1.17.0-2+b1 libxcb-render-util0_0.3.10-1 libxcb-render0_1.17.0-2+b1 libxcb-shape0_1.17.0-2+b1 libxcb-shm0_1.17.0-2+b1 libxcb-sync1_1.17.0-2+b1 libxcb-util1_0.4.1-1 libxcb-xfixes0_1.17.0-2+b1 libxcb-xinerama0_1.17.0-2+b1 libxcb-xinput0_1.17.0-2+b1 libxcb-xkb1_1.17.0-2+b1 libxcb1_1.17.0-2+b1 libxcb1-dev_1.17.0-2+b1 libxdmcp-dev_1:1.1.5-1 libxdmcp6_1:1.1.5-1 libxext-dev_2:1.3.4-1+b3 libxext6_2:1.3.4-1+b3 libxkbcommon-x11-0_1.7.0-2 libxkbcommon0_1.7.0-2 libxml2_2.12.7+dfsg+really2.9.14-0.4 libxpm-dev_1:3.5.17-1+b3 libxpm4_1:3.5.17-1+b3 libxrender1_1:0.9.12-1 libxshmfence1_1.3.3-1 libxxf86vm1_1:1.1.4-1+b4 libxxhash0_0.8.3-2 libz3-4_4.13.3-1 libzstd-dev_1.5.7+dfsg-1 libzstd1_1.5.7+dfsg-1 linux-libc-dev_6.12.21-1 login_1:4.16.0-2+really2.41-3 login.defs_1:4.17.4-1 logsave_1.47.2-1+b1 lsb-base_11.6 lsb-release_12.1-1 m4_1.4.19-7 make_4.4.1-1 man-db_2.13.0-1 man2html-base_1.6g-16 mawk_1.3.4.20250131-1 media-types_13.0.0 mesa-libgallium_25.0.3-1 mount_2.41-3 multiarch-support_2.28-10 ncurses-base_6.5+20250216-2 ncurses-bin_6.5+20250216-2 netbase_6.5 openssl-provider-legacy_3.4.1-1 passwd_1:4.17.4-1 patch_2.7.6-7 perl_5.40.1-2 perl-base_5.40.1-2 perl-modules-5.40_5.40.1-2 pinentry-curses_1.3.1-2 pkg-config_1.8.1-4 pkgconf_1.8.1-4 pkgconf-bin_1.8.1-4 po-debconf_1.0.21+nmu1 python3_3.13.2-2 python3-minimal_3.13.2-2 python3.13_3.13.2-3 python3.13-minimal_3.13.2-3 qdoc-qt5_5.15.15-6 qhelpgenerator-qt5_5.15.15-6 qt5-assistant_5.15.15-6 qt5-qmake_5.15.15+dfsg-5 qt5-qmake-bin_5.15.15+dfsg-5 qtattributionsscanner-qt5_5.15.15-6 qtbase5-dev_5.15.15+dfsg-5 qtbase5-dev-tools_5.15.15+dfsg-5 qtchooser_66-2 qttools5-dev-tools_5.15.15-6 readline-common_8.2-6 rpcsvc-proto_1.4.3-1 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-x2goclient-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 shared-mime-info_2.4-5+b2 sqv_1.3.0-1 strace_6.13+ds-1 sysvinit-utils_3.14-4 tar_1.35+dfsg-3.1 tzdata_2025b-1 usrmerge_39+nmu2 util-linux_2.41-3 x11-common_1:7.7+24 x11proto-dev_2024.1-1 x2go-keyring_2019.08.21~git20190824.119+9999.heuler.1 xkb-data_2.42-1 xorg-sgml-doctools_1:1.11-1.1 xtrans-dev_1.4.0-1 xz-utils_5.8.1-1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1 zlib1g-dev_1:1.3.dfsg+really1.3.1-1+b1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- dpkg-source: warning: extracting unsigned source package (x2goclient_4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1.dsc) dpkg-source: info: extracting x2goclient in /<<PKGBUILDDIR>> dpkg-source: info: unpacking x2goclient_4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1.tar.gz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=POSIX LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=jenkins PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<<PKGBUILDDIR>> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=jenkins SCHROOT_SESSION_ID=unstable-amd64-sbuild-d69cb2e0-43a1-4283-a759-0ed95d85e005 SCHROOT_UID=106 SCHROOT_USER=jenkins SHELL=/bin/sh USER=jenkins dpkg-buildpackage ----------------- dpkg-buildpackage: info: source package x2goclient dpkg-buildpackage: info: source version 4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by X2Go Git Administrator <git-admin(a)x2go.org> dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean --parallel dh: warning: Compatibility levels before 10 are deprecated (level 7 in use) debian/rules override_dh_auto_clean make[1]: Entering directory '/<<PKGBUILDDIR>>' # Try to regenerate debian/control if necessary, but don't force it. # sbuild will run the clean operation non-chrooted before building the # source package, meaning that we're not running in the target system, # so forcefully regenerating it will lead to wrong results. debian/rules 'debian/control' make[2]: Entering directory '/<<PKGBUILDDIR>>' make[2]: 'debian/control' is up to date. make[2]: Leaving directory '/<<PKGBUILDDIR>>' dh_auto_clean dh_auto_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) make -j2 clean make[2]: Entering directory '/<<PKGBUILDDIR>>' rm -fr /<<PKGBUILDDIR>>/client_build make -f Makefile.man2html clean make[3]: Entering directory '/<<PKGBUILDDIR>>' make[3]: *** No rule to make target 'SHELL'. Stop. make[3]: Leaving directory '/<<PKGBUILDDIR>>' make[2]: *** [Makefile:105: clean_man] Error 2 make[2]: Leaving directory '/<<PKGBUILDDIR>>' dh_auto_clean: error: make -j2 clean returned exit code 2 make[1]: *** [debian/rules:156: override_dh_auto_clean] Error 255 make[1]: Leaving directory '/<<PKGBUILDDIR>>' make: *** [debian/rules:140: clean] Error 2 dpkg-buildpackage: error: debian/rules clean subprocess returned exit status 2 -------------------------------------------------------------------------------- Build finished at 2025-04-06T08:59:05Z Finished -------- +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<<BUILDDIR>> Not cleaning session: cloned chroot in use E: Build failure (dpkg-buildpackage died) +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 30800 Build-Time: 1 Distribution: unstable Fail-Stage: build Host Architecture: amd64 Install-Time: 45 Job: /home/_jenkins_/tmp/tmp.lEKDQADDvPhAMLBNLnhmyq7r/x2goclient_4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1.dsc Machine Architecture: amd64 Package: x2goclient Package-Time: 1298 Source-Version: 4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1 Space: 30800 Status: attempted Version: 4.1.2.4-0x2go1~git20250406.2109+9999.heuler.1 -------------------------------------------------------------------------------- Finished at 2025-04-06T08:59:05Z Build needed 00:21:38, 30800k disk space E: Build failure (dpkg-buildpackage died) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.lEKDQADDvPhAMLBNLnhmyq7r ']' + '[' -d /var/lib/jenkins/tmp/tmp.lEKDQADDvPhAMLBNLnhmyq7r ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.lEKDQADDvPhAMLBNLnhmyq7r Build step 'Execute shell' marked build as failure

1 20

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits