A page in your DokuWiki was added or changed. Here are the details: Date : 2017/01/01 19:57 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483300259 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -235,9 +235,9 @@ * ''ldap1=ldap-backupserver-1.example.com:389'' - this allows you to specify the first of up to two LDAP backup servers when using LDAP authentication * ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication These are //not yet implemented//, but planned for a future release: - * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. + * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value. All values are given in seconds. * ''nodpms'' - Will not touch DPMS settings at all (by default, ''blank=0'' does both ''xset s off'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings. * ''tcpprint'' - Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same Network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a Laptop roaming between different networks. * ''tcpprintonlyfrom='' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. -- This mail was generated by DokuWiki at http://wiki.x2go.org/