A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:16 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208014 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Prerequisites] User : stefanbaur @@ -145,8 +145,9 @@ * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored. This is not covered here, though we might add a separate howto for that some time later on. * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image. * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well. * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer. + * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#building_your_own_x2go-tce_image]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default) ==== Setting up your own netbootable X2Go-TCE environment ==== === Adding the X2Go-TCE files to your Boot and Web Server(s) === -- This mail was generated by DokuWiki at http://wiki.x2go.org/