See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-stretch/20/display/redirect?page=changes> Changes: [mike.gabriel] pyhoca-cli: Add --force-password command line switch to override SSH key ------------------------------------------ [...truncated 7.51 KB...] + typeset 'OLDIFS= ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=stretch + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z stretch + grep stretch debian:stretch +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU + cd /var/lib/jenkins/build/heuler/pyhoca-cli + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-cli /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli/ Cloning into '/var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli'... + cd /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-cli/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-cli_*.orig.tar.gz' ++ gitrevno + GITREV=246 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*\(quilt\)$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=stretch + '[' stretch = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian stretch ++ typeset dist=debian ++ typeset codename_in=stretch ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=stretch ++ '[' stretch = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh stretch ++ numerical_version=9 ++ ret=0 ++ echo 9 ++ return 0 + numerical_version=9 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*\(.*\),Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution stretch --force-distribution -l '~git20180306.246+9.heuler.' 'Development-Snapshot!!! Auto-built Debian stretch (9) package for packages.x2go.org repository (Git commit: 835cd53bd275130a3a6f5b7582d7de44a0c5bff5).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-cli + OTHERMIRROR='deb http://packages.x2go.org/debian stretch main heuler' + '[' pyhoca-cli = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian stretch main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/amd64 + nice sbuild -n --jobs=2 -sA --dist=stretch --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian stretch main heuler' /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli dh clean --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:184: python3.5 setup.py clean Traceback (most recent call last): File "setup.py", line 23, in <module> from setuptools import setup ImportError: No module named 'setuptools' E: pybuild pybuild:283: clean: plugin distutils failed with: exit code=1: python3.5 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.5 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 25 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli' debian/rules:7: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli (/home/_jenkins_/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU/pyhoca-cli_0.5.99.0-0x2go1~git20180306.246+9.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU ']' + '[' -d /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.9upujOg1q2N5Fo6rsHk1KrmU Build step 'Execute shell' marked build as failure

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-stretch/22/display/redirect?page=changes> Changes: [mike.gabriel] man page: Add --force-password option. ------------------------------------------ [...truncated 7.41 KB...] + typeset 'OLDIFS= ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=stretch + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z stretch + grep stretch debian:stretch +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6 + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6 + cd /var/lib/jenkins/build/heuler/pyhoca-cli + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-cli /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli/ Cloning into '/var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli'... + cd /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-cli/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-cli_*.orig.tar.gz' ++ gitrevno + GITREV=248 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*\(quilt\)$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=stretch + '[' stretch = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian stretch ++ typeset dist=debian ++ typeset codename_in=stretch ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=stretch ++ '[' stretch = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh stretch ++ numerical_version=9 ++ ret=0 ++ echo 9 ++ return 0 + numerical_version=9 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 9 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*\(.*\),Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution stretch --force-distribution -l '~git20180307.248+9.heuler.' 'Development-Snapshot!!! Auto-built Debian stretch (9) package for packages.x2go.org repository (Git commit: 4e61d8da3388b72bdae5e202da62a3e93a77996b).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-cli + OTHERMIRROR='deb http://packages.x2go.org/debian stretch main heuler' + '[' pyhoca-cli = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 9 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian stretch main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/stretch/amd64 + nice sbuild -n --jobs=2 -sA --dist=stretch --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian stretch main heuler' /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli dh clean --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:184: python3.5 setup.py clean Traceback (most recent call last): File "setup.py", line 23, in <module> from setuptools import setup ImportError: No module named 'setuptools' E: pybuild pybuild:283: clean: plugin distutils failed with: exit code=1: python3.5 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.5 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 25 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli' debian/rules:7: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli (/home/_jenkins_/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6/pyhoca-cli_0.5.99.0-0x2go1~git20180307.248+9.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6 ']' + '[' -d /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6 ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.Z7JOV2PtB85OAnHzflytUJc6 Build step 'Execute shell' marked build as failure

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-stretch/24/display/redirect?page=changes> Changes: [mike.gabriel] debian/rules: Ignore failures during dh_auto_clean. Helps with build ------------------------------------------ [...truncated 62.72 KB...] Preparing to unpack .../12-autopoint_0.19.8.1-2_all.deb ... Unpacking autopoint (0.19.8.1-2) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-2_all.deb ... Unpacking libtool (2.4.6-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_14_all.deb ... Unpacking dh-autoreconf (14) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.59-1_all.deb ... Unpacking libarchive-zip-perl (1.59-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../16-libfile-stripnondeterminism-perl_0.034-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.034-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../17-libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../18-dh-strip-nondeterminism_0.034-1_all.deb ... Unpacking dh-strip-nondeterminism (0.034-1) ... Selecting previously unselected package libffi6:amd64. Preparing to unpack .../19-libffi6_3.2.1-6_amd64.deb ... Unpacking libffi6:amd64 (3.2.1-6) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../20-libglib2.0-0_2.50.3-2_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.50.3-2) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../21-libcroco3_0.6.11-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.11-3) ... Selecting previously unselected package libunistring0:amd64. Preparing to unpack .../22-libunistring0_0.9.6+really0.9.3-0.1_amd64.deb ... Unpacking libunistring0:amd64 (0.9.6+really0.9.3-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../23-gettext_0.19.8.1-2_amd64.deb ... Unpacking gettext (0.19.8.1-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../24-intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../25-po-debconf_1.0.20_all.deb ... Unpacking po-debconf (1.0.20) ... Selecting previously unselected package debhelper. Preparing to unpack .../26-debhelper_10.2.5_all.deb ... Unpacking debhelper (10.2.5) ... Selecting previously unselected package man2html-base. Preparing to unpack .../27-man2html-base_1.6g-9_amd64.deb ... Unpacking man2html-base (1.6g-9) ... Selecting previously unselected package python3-all. Preparing to unpack .../28-python3-all_3.5.3-1_amd64.deb ... Unpacking python3-all (3.5.3-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../29-python3-pkg-resources_33.1.1-1_all.deb ... Unpacking python3-pkg-resources (33.1.1-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../30-python3-setuptools_33.1.1-1_all.deb ... Unpacking python3-setuptools (33.1.1-1) ... Selecting previously unselected package sbuild-build-depends-pyhoca-cli-dummy. Preparing to unpack .../31-sbuild-build-depends-pyhoca-cli-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-pyhoca-cli-dummy (0.invalid.0) ... Setting up libarchive-zip-perl (1.59-1) ... Setting up mime-support (3.60) ... Setting up libtimedate-perl (2.3000-2) ... Setting up libsigsegv2:amd64 (2.10-5) ... Setting up man2html-base (1.6g-9) ... Setting up groff-base (1.22.3-9) ... Setting up gettext-base (0.19.8.1-2) ... Setting up libpipeline1:amd64 (1.4.1-2) ... Setting up m4 (1.4.18-1) ... Setting up libicu57:amd64 (57.1-6+deb9u1) ... Setting up libbsd0:amd64 (0.8.3-1) ... Setting up libxml2:amd64 (2.9.4+dfsg1-2.2+deb9u2) ... Setting up libmagic-mgc (1:5.30-1+deb9u1) ... Setting up libmagic1:amd64 (1:5.30-1+deb9u1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up autotools-dev (20161112.1) ... Setting up libunistring0:amd64 (0.9.6+really0.9.3-0.1) ... Setting up libffi6:amd64 (3.2.1-6) ... Setting up bsdmainutils (9.0.12+nmu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autopoint (0.19.8.1-2) ... Setting up libmpdec2:amd64 (2.4.2-1) ... Setting up libfile-stripnondeterminism-perl (0.034-1) ... Setting up libglib2.0-0:amd64 (2.50.3-2) ... No schema files found: doing nothing. Setting up libpython3.5-stdlib:amd64 (3.5.3-1) ... Setting up autoconf (2.69-10) ... Setting up file (1:5.30-1+deb9u1) ... Setting up libcroco3:amd64 (0.6.11-3) ... Setting up automake (1:1.15-6) ... update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode Setting up man-db (2.7.6.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libtool (2.4.6-2) ... Setting up python3.5 (3.5.3-1) ... Setting up libpython3-stdlib:amd64 (3.5.3-1) ... Setting up gettext (0.19.8.1-2) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up po-debconf (1.0.20) ... Setting up dh-autoreconf (14) ... Setting up python3 (3.5.3-1) ... Setting up python3-pkg-resources (33.1.1-1) ... Setting up dh-strip-nondeterminism (0.034-1) ... Setting up python3-all (3.5.3-1) ... Setting up python3-setuptools (33.1.1-1) ... Setting up dh-python (2.20170125) ... Setting up debhelper (10.2.5) ... Setting up sbuild-build-depends-pyhoca-cli-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.9.0-5-amd64 amd64 (x86_64) Toolchain package versions: binutils_2.28-5 dpkg-dev_1.18.24 g++-6_6.3.0-18+deb9u1 gcc-6_6.3.0-18+deb9u1 libc6-dev_2.24-11+deb9u3 libstdc++-6-dev_6.3.0-18+deb9u1 libstdc++6_6.3.0-18+deb9u1 linux-libc-dev_4.9.82-1+deb9u3 Package versions: adduser_3.115 apt_1.4.8 autoconf_2.69-10 automake_1:1.15-6 autopoint_0.19.8.1-2 autotools-dev_20161112.1 base-files_9.9+deb9u4 base-passwd_3.5.43 bash_4.4-5 binutils_2.28-5 bsdmainutils_9.0.12+nmu1 bsdutils_1:2.29.2-1 build-essential_12.3 bzip2_1.0.6-8.1 ccache_3.3.4-1 coreutils_8.26-3 cpp_4:6.3.0-4 cpp-6_6.3.0-18+deb9u1 dash_0.5.8-2.4 debconf_1.5.61 debhelper_10.2.5 debian-archive-keyring_2017.5 debianutils_4.8.1.1 dh-autoreconf_14 dh-python_2.20170125 dh-strip-nondeterminism_0.034-1 diffutils_1:3.5-3 dpkg_1.18.24 dpkg-dev_1.18.24 e2fslibs_1.43.4-2 e2fsprogs_1.43.4-2 eatmydata_105-5 fakeroot_1.21-3.1 file_1:5.30-1+deb9u1 findutils_4.6.0+git+20161106-2 g++_4:6.3.0-4 g++-6_6.3.0-18+deb9u1 gcc_4:6.3.0-4 gcc-5-base_5.4.1-3 gcc-6_6.3.0-18+deb9u1 gcc-6-base_6.3.0-18+deb9u1 gettext_0.19.8.1-2 gettext-base_0.19.8.1-2 gnupg_2.1.18-8~deb9u1 gnupg-agent_2.1.18-8~deb9u1 gpgv_2.1.18-8~deb9u1 grep_2.27-2 groff-base_1.22.3-9 gzip_1.6-5+b1 hostname_3.18+b1 init-system-helpers_1.48 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3+b1 libapt-pkg5.0_1.4.8 libarchive-zip-perl_1.59-1 libasan3_6.3.0-18+deb9u1 libassuan0_2.4.3-2 libatomic1_6.3.0-18+deb9u1 libattr1_1:2.4.47-2+b2 libaudit-common_1:2.6.7-2 libaudit1_1:2.6.7-2 libblkid1_2.29.2-1 libbsd0_0.8.3-1 libbz2-1.0_1.0.6-8.1 libc-bin_2.24-11+deb9u3 libc-dev-bin_2.24-11+deb9u3 libc6_2.24-11+deb9u3 libc6-dev_2.24-11+deb9u3 libcap-ng0_0.7.7-3+b1 libcc1-0_6.3.0-18+deb9u1 libcilkrts5_6.3.0-18+deb9u1 libcomerr2_1.43.4-2 libcroco3_0.6.11-3 libdb5.3_5.3.28-12+deb9u1 libdebconfclient0_0.227 libdpkg-perl_1.18.24 libeatmydata1_105-5 libexpat1_2.2.0-2+deb9u1 libfakeroot_1.21-3.1 libfdisk1_2.29.2-1 libffi6_3.2.1-6 libfile-stripnondeterminism-perl_0.034-1 libgcc-6-dev_6.3.0-18+deb9u1 libgcc1_1:6.3.0-18+deb9u1 libgcrypt20_1.7.6-2+deb9u2 libgdbm3_1.8.3-14 libglib2.0-0_2.50.3-2 libgmp10_2:6.1.2+dfsg-1 libgomp1_6.3.0-18+deb9u1 libgpg-error0_1.26-2 libicu57_57.1-6+deb9u1 libisl15_0.18-1 libitm1_6.3.0-18+deb9u1 libksba8_1.3.5-2 liblsan0_6.3.0-18+deb9u1 liblz4-1_0.0~r131-2+b1 liblzma5_5.2.2-1.2+b1 libmagic-mgc_1:5.30-1+deb9u1 libmagic1_1:5.30-1+deb9u1 libmount1_2.29.2-1 libmpc3_1.0.3-1+b2 libmpdec2_2.4.2-1 libmpfr4_3.1.5-1 libmpx2_6.3.0-18+deb9u1 libncurses5_6.0+20161126-1+deb9u2 libncursesw5_6.0+20161126-1+deb9u2 libnpth0_1.3-1 libpam-modules_1.1.8-3.6 libpam-modules-bin_1.1.8-3.6 libpam-runtime_1.1.8-3.6 libpam0g_1.1.8-3.6 libpcre3_2:8.39-3 libperl5.24_5.24.1-3+deb9u2 libpipeline1_1.4.1-2 libpython3-stdlib_3.5.3-1 libpython3.5-minimal_3.5.3-1 libpython3.5-stdlib_3.5.3-1 libquadmath0_6.3.0-18+deb9u1 libreadline7_7.0-3 libselinux1_2.6-3+b3 libsemanage-common_2.6-2 libsemanage1_2.6-2 libsepol1_2.6-2 libsigsegv2_2.10-5 libsmartcols1_2.29.2-1 libsqlite3-0_3.16.2-5+deb9u1 libss2_1.43.4-2 libssl1.1_1.1.0f-3+deb9u1 libstdc++-6-dev_6.3.0-18+deb9u1 libstdc++6_6.3.0-18+deb9u1 libsystemd0_232-25+deb9u2 libtimedate-perl_2.3000-2 libtinfo5_6.0+20161126-1+deb9u2 libtool_2.4.6-2 libtsan0_6.3.0-18+deb9u1 libubsan0_6.3.0-18+deb9u1 libudev1_232-25+deb9u2 libunistring0_0.9.6+really0.9.3-0.1 libustr-1.0-1_1.0.4-6 libuuid1_2.29.2-1 libxml2_2.9.4+dfsg1-2.2+deb9u2 linux-libc-dev_4.9.82-1+deb9u3 login_1:4.4-4.1 lsb-base_9.20161125 m4_1.4.18-1 make_4.1-9.1 man-db_2.7.6.1-2 man2html-base_1.6g-9 mawk_1.3.3-17+b3 mime-support_3.60 mount_2.29.2-1 multiarch-support_2.24-11+deb9u3 ncurses-base_6.0+20161126-1+deb9u2 ncurses-bin_6.0+20161126-1+deb9u2 passwd_1:4.4-4.1 patch_2.7.5-1+b2 perl_5.24.1-3+deb9u2 perl-base_5.24.1-3+deb9u2 perl-modules-5.24_5.24.1-3+deb9u2 pinentry-curses_1.0.0-2 po-debconf_1.0.20 python3_3.5.3-1 python3-all_3.5.3-1 python3-minimal_3.5.3-1 python3-pkg-resources_33.1.1-1 python3-setuptools_33.1.1-1 python3.5_3.5.3-1 python3.5-minimal_3.5.3-1 readline-common_7.0-3 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-pyhoca-cli-dummy_0.invalid.0 sed_4.4-1 sensible-utils_0.0.9+deb9u1 sysvinit-utils_2.88dsf-59.9 tar_1.29b-1.1 tzdata_2018c-0+deb9u1 util-linux_2.29.2-1 xz-utils_5.2.2-1.2+b1 zlib1g_1:1.2.8.dfsg-5 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- dpkg-source: warning: extracting unsigned source package (pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+9.heuler.1.dsc) dpkg-source: info: extracting pyhoca-cli in /<<PKGBUILDDIR>> dpkg-source: info: unpacking pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+9.heuler.1.tar.gz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=POSIX LOGNAME=jenkins PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SCHROOT_ALIAS_NAME=stretch-amd64-sbuild SCHROOT_CHROOT_NAME=stretch-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=jenkins SCHROOT_SESSION_ID=stretch-amd64-sbuild-93a14d97-51f7-4f15-9d82-1de41ec757ba SCHROOT_UID=106 SCHROOT_USER=jenkins SHELL=/bin/sh USER=jenkins dpkg-buildpackage ----------------- dpkg-buildpackage: info: source package pyhoca-cli dpkg-buildpackage: info: source version 0.5.99.1-0x2go1~git20180513.251+9.heuler.1 dpkg-buildpackage: info: source distribution stretch dpkg-buildpackage: info: source changed by Jenkins <jenkins@japsand.x2go.org> dpkg-source --before-build pyhoca-cli-0.5.99.1 dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/<<PKGBUILDDIR>>' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:184: python3.5 setup.py clean Traceback (most recent call last): File "setup.py", line 26, in <module> for line in open(os.path.join('x2go', '__init__.py'),encoding='utf-8').readlines(): FileNotFoundError: [Errno 2] No such file or directory: 'x2go/__init__.py' E: pybuild pybuild:283: clean: plugin distutils failed with: exit code=1: python3.5 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.5 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: [override_dh_auto_clean] Error 25 (ignored) make[1]: Leaving directory '/<<PKGBUILDDIR>>' dh_clean -O--buildsystem=pybuild dpkg-source -b pyhoca-cli-0.5.99.1 dpkg-source: info: using source format '1.0' dpkg-source: info: building pyhoca-cli in pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+9.heuler.1.tar.gz dpkg-source: info: building pyhoca-cli in pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+9.heuler.1.dsc debian/rules build dh build --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:184: python3.5 setup.py config Traceback (most recent call last): File "setup.py", line 26, in <module> for line in open(os.path.join('x2go', '__init__.py'),encoding='utf-8').readlines(): FileNotFoundError: [Errno 2] No such file or directory: 'x2go/__init__.py' E: pybuild pybuild:283: configure: plugin distutils failed with: exit code=1: python3.5 setup.py config dh_auto_configure: pybuild --configure -i python{version} -p 3.5 returned exit code 13 debian/rules:7: recipe for target 'build' failed make: *** [build] Error 25 dpkg-buildpackage: error: debian/rules build gave error exit status 2 -------------------------------------------------------------------------------- Build finished at 2018-05-13T18:55:16Z Finished -------- +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<<BUILDDIR>> Not cleaning session: cloned chroot in use E: Build failure (dpkg-buildpackage died) +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 692 Build-Time: 2 Distribution: stretch Fail-Stage: build Host Architecture: amd64 Install-Time: 120 Job: /home/_jenkins_/tmp/tmp.lat1aoaMJ3GjSRweQHgvYyf9/pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+9.heuler.1.dsc Machine Architecture: amd64 Package: pyhoca-cli Package-Time: 1310 Source-Version: 0.5.99.1-0x2go1~git20180513.251+9.heuler.1 Space: 692 Status: attempted Version: 0.5.99.1-0x2go1~git20180513.251+9.heuler.1 -------------------------------------------------------------------------------- Finished at 2018-05-13T18:55:16Z Build needed 00:21:50, 692k disk space E: Build failure (dpkg-buildpackage died) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.lat1aoaMJ3GjSRweQHgvYyf9 ']' + '[' -d /var/lib/jenkins/tmp/tmp.lat1aoaMJ3GjSRweQHgvYyf9 ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.lat1aoaMJ3GjSRweQHgvYyf9 Build step 'Execute shell' marked build as failure