A page in your DokuWiki was added or changed. Here are the details: Date : 2013/03/10 16:02 Browser : Mozilla/5.0 (Windows NT 5.1; rv:19.0) Gecko/20100101 Firefox/19.0 IP-Address : 93.104.156.228 Hostname : ppp-93-104-156-228.dynamic.mnet-online.de Old Revision: http://wiki.x2go.org/doku.php/wiki:x2goserver-install-redhat?rev=1362930918 New Revision: http://wiki.x2go.org/doku.php/wiki:x2goserver-install-redhat Edit Summary: old revision restored (2013/03/08 13:31) User : morty @@ -1,55 +1,45 @@ ====== Minimal x2gosever install guide for RHEL 6 ====== - ===== Adding the Open Build Service Repo for x2go ===== - - Download the repo file and move it to the correct location: - <code bash> - wget http://download.opensuse.org/repositories/X11:/RemoteDesktop:/x2go/RHEL_6/X1... - sudo cp X11:RemoteDesktop:x2go.repo /etc/yum.repos.d/x2go.repo - </code> - - **Hint:** If you are behind a proxy, make sure the proxy is defined in ''/etc/yum.conf''. Standard yum repos do not use the same connection mechanisms as rhn channels. - - Congratulations, you are now able to access the X2Go packages. You may continue by installing x2goserver, x2goclient or pyhoca-gui or any other of the available packages. + [[wiki:x2go-repository-redhat|Add the x2go repo]] to your yum configuration. ===== Activating Optional Channels for RHEL ===== Check that you have activated the "optional" channel: - <code bash> - sudo rhn-channel -l + <code> + $ sudo rhn-channel -l </code> If the optional channel for your base channel is not active, activate it. e.g.: - <code bash> - sudo rhn-channel --add -c rhel-x86_64-server-optional-6 + <code> + $ sudo rhn-channel --add -c rhel-x86_64-server-optional-6 </code> ===== Installing sshfs (fuse) ===== Currently, even in the optional channel, there is no official package for sshfs and it is not (yet?) included in the x2go repo. Thus it has to be downloaded form an alternate source: ==== Option 1: Download the package manually ==== - <code bash> - sudo yum install fuse fuse-libs - wget http://pkgs.repoforge.org/fuse-sshfs/fuse-sshfs-2.2-1.el6.rf.x86_64.rpm - sudo rpm -i --nosignature fuse-sshfs-2.2-1.el6.rf.x86_64.rpm + <code> + $ sudo yum install fuse fuse-libs + $ wget http://pkgs.repoforge.org/fuse-sshfs/fuse-sshfs-2.2-1.el6.rf.x86_64.rpm + $ sudo rpm -i --nosignature fuse-sshfs-2.2-1.el6.rf.x86_64.rpm </code> ==== Option 2: Install EPEL ==== URL to most recent EPEL repo installation package available [[http://mirror01.th.ifl.net/epel/6/i386/repoview/epel-release.html|here]] - <code bash> - wget http://mirror01.th.ifl.net/epel/6/i386/epel-release-6-7.noarch.rpm - sudo rpm -i epel-release-6-7.noarch.rpm - sudo yum install fuse-sshfs + <code> + $ wget http://mirror01.th.ifl.net/epel/6/i386/epel-release-6-7.noarch.rpm + $ sudo rpm -i epel-release-6-7.noarch.rpm + $ sudo yum install fuse-sshfs </code> ===== Installing x2go server ===== You should now be able to install the x2goserver package: - <code bash> - sudo yum install x2goserver + <code> + $ sudo yum install x2goserver </code> - **Warning:** Note that currently the server must be in runlevel 5 to accept connections. + <note warning>Note that currently the server must be in runlevel 5 to accept connections.</note> -- This mail was generated by DokuWiki at http://wiki.x2go.org/