See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-buster/7/display/redirect?page=changes> Changes: [mike.gabriel] pyhoca-cli: Add --force-password command line switch to override SSH key ------------------------------------------ [...truncated 7.48 KB...] + typeset 'OLDIFS= ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=buster + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z buster + grep buster debian:buster +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv + cd /var/lib/jenkins/build/heuler/pyhoca-cli + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-cli /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli/ Cloning into '/var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli'... + cd /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-cli/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-cli_*.orig.tar.gz' ++ gitrevno + GITREV=246 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*\(quilt\)$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=buster + '[' buster = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian buster ++ typeset dist=debian ++ typeset codename_in=buster ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=buster ++ '[' buster = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh buster ++ numerical_version=10 ++ ret=0 ++ echo 10 ++ return 0 + numerical_version=10 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 10 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*\(.*\),Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution buster --force-distribution -l '~git20180306.246+10.heuler.' 'Development-Snapshot!!! Auto-built Debian buster (10) package for packages.x2go.org repository (Git commit: 835cd53bd275130a3a6f5b7582d7de44a0c5bff5).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-cli + OTHERMIRROR='deb http://packages.x2go.org/debian buster main heuler' + '[' pyhoca-cli = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 10 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian buster main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/amd64 + nice sbuild -n --jobs=2 -sA --dist=buster --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian buster main heuler' /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli dh clean --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:184: python3.5 setup.py clean Traceback (most recent call last): File "setup.py", line 23, in <module> from setuptools import setup ImportError: No module named 'setuptools' E: pybuild pybuild:283: clean: plugin distutils failed with: exit code=1: python3.5 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.5 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 25 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli' debian/rules:7: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli (/home/_jenkins_/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv/pyhoca-cli_0.5.99.0-0x2go1~git20180306.246+10.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv ']' + '[' -d /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.0VkvNcQ1aV2xKqquQ3bVXSgv Build step 'Execute shell' marked build as failure

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-buster/9/display/redirect?page=changes> Changes: [mike.gabriel] man page: Add --force-password option. ------------------------------------------ [...truncated 7.29 KB...] + typeset 'OLDIFS= ' + IFS=' ' + read -a deb_build_for_arr + IFS=' ' + typeset line= + for line in "${deb_build_for_arr[@]}" ++ cut -d: -f1 ++ tr '[:upper:]' '[:lower:]' + l_DIST=debian + l_CODENAMES=buster + grep -qs debian + for l_CODENAME in ${l_CODENAMES} + test -z buster + grep buster debian:buster +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3 + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3 + cd /var/lib/jenkins/build/heuler/pyhoca-cli + git clone --no-hardlinks --no-local /var/lib/jenkins/build/heuler/pyhoca-cli /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli/ Cloning into '/var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli'... + cd /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/pyhoca-cli/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'pyhoca-cli_*.orig.tar.gz' ++ gitrevno + GITREV=248 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*\(quilt\)$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=buster + '[' buster = sid ']' + typeset numerical_version= + typeset pretty_dist= + typeset -i tmp_ret=1 ++ map_codename_to_numerical_version debian buster ++ typeset dist=debian ++ typeset codename_in=buster ++ '[' -n 4 ']' ++ '[' 4 -gt 3 ']' ++ typeset -l codename=buster ++ '[' buster = sid ']' ++ typeset numerical_version= ++ typeset -i ret=1 ++ '[' debian = debian ']' +++ debian-codename-to-version.sh buster ++ numerical_version=10 ++ ret=0 ++ echo 10 ++ return 0 + numerical_version=10 + tmp_ret=0 + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 10 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*\(.*\),Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution buster --force-distribution -l '~git20180307.248+10.heuler.' 'Development-Snapshot!!! Auto-built Debian buster (10) package for packages.x2go.org repository (Git commit: 4e61d8da3388b72bdae5e202da62a3e93a77996b).' + typeset -i skip_arch_all=0 + typeset -a arches + arches=() + case "${PLATFORM}" in + arches+=("amd64" "i386") + '[' debian = raspbian ']' + typeset cur_arch= + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/amd64 + for cur_arch in "${arches[@]}" + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs pyhoca-cli + OTHERMIRROR='deb http://packages.x2go.org/debian buster main heuler' + '[' pyhoca-cli = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}") + '[' 10 -gt 8 ']' + sbuild_options+=("--build-dep-resolver=apt") + sbuild_options+=("--resolve-alternatives") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian buster main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_amd64 sbuild_options_i386 sbuild_options_armhf sbuild_options_powerpc sbuild_options_ppc64 sbuild_options_ppc64el + sbuild_options_amd64=("${sbuild_options[@]}") + sbuild_options_i386=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + sbuild_options_powerpc=("${sbuild_options[@]}" "--debbuildopts=-B") + sbuild_options_ppc64=("${sbuild_options[@]}" "--arch=ppc64" "--chroot=${codename}-ppc64-sbuild" "--debbuildopts=-B") + sbuild_options_ppc64el=("${sbuild_options[@]}" "--debbuildopts=-B") + typeset base_arch=amd64 + '[' -n amd64 ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli/debian/control + typeset -i has_arch_dep=0 + grep -Eqs 'Architecture.*(any|amd64)' /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli/debian/control + '[' 0 -eq 1 ']' + '[' 0 -eq 0 ']' + typeset 'indirect=sbuild_options_amd64[@]' + typeset -a indirect_resolve + indirect_resolve=("${!indirect}") + cd /var/lib/jenkins/pkg-dist/heuler/pyhoca-cli/debian/buster/amd64 + nice sbuild -n --jobs=2 -sA --dist=buster --keyid=F4A7678C9C6B0B2B --build-dep-resolver=apt --resolve-alternatives '--extra-repository=deb http://packages.x2go.org/debian buster main heuler' /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli dh clean --with=python3 --buildsystem=pybuild dh_testdir -O--buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:184: python3.5 setup.py clean Traceback (most recent call last): File "setup.py", line 23, in <module> from setuptools import setup ImportError: No module named 'setuptools' E: pybuild pybuild:283: clean: plugin distutils failed with: exit code=1: python3.5 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.5 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 25 make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli' debian/rules:7: recipe for target 'clean' failed make: *** [clean] Error 2 E: Failed to clean source directory /home/_jenkins_/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli (/home/_jenkins_/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3/pyhoca-cli_0.5.99.0-0x2go1~git20180307.248+10.heuler.1.dsc) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3 ']' + '[' -d /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3 ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.coAkf1Us6Qcc2o7U6b3im6l3 Build step 'Execute shell' marked build as failure

See <http://jenkins.x2go.org:8080/job/pyhoca-cli+nightly+debian-buster/11/display/redirect?page=changes> Changes: [mike.gabriel] debian/rules: Ignore failures during dh_auto_clean. Helps with build ------------------------------------------ [...truncated 125.51 KB...] Selecting previously unselected package libtool. Preparing to unpack .../11-libtool_2.4.6-2.1_all.deb ... Unpacking libtool (2.4.6-2.1) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../12-dh-autoreconf_17_all.deb ... Unpacking dh-autoreconf (17) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../13-libarchive-zip-perl_1.60-1_all.deb ... Unpacking libarchive-zip-perl (1.60-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../14-libfile-stripnondeterminism-perl_0.041-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.041-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../15-libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../16-dh-strip-nondeterminism_0.041-1_all.deb ... Unpacking dh-strip-nondeterminism (0.041-1) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../17-libglib2.0-0_2.56.1-2_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.56.1-2) ... Selecting previously unselected package libicu57:amd64. Preparing to unpack .../18-libicu57_57.1-9_amd64.deb ... Unpacking libicu57:amd64 (57.1-9) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../19-libxml2_2.9.4+dfsg1-6.1_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-6.1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../20-libcroco3_0.6.12-2_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-2) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../21-libncurses6_6.1+20180210-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20180210-2) ... Selecting previously unselected package gettext. Preparing to unpack .../22-gettext_0.19.8.1-6+b1_amd64.deb ... Unpacking gettext (0.19.8.1-6+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../23-intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../24-po-debconf_1.0.20_all.deb ... Unpacking po-debconf (1.0.20) ... Selecting previously unselected package debhelper. Preparing to unpack .../25-debhelper_11.2.1_all.deb ... Unpacking debhelper (11.2.1) ... Selecting previously unselected package man2html-base. Preparing to unpack .../26-man2html-base_1.6g-11_amd64.deb ... Unpacking man2html-base (1.6g-11) ... Selecting previously unselected package python3-all. Preparing to unpack .../27-python3-all_3.6.4-1_amd64.deb ... Unpacking python3-all (3.6.4-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../28-python3-pkg-resources_39.0.1-2_all.deb ... Unpacking python3-pkg-resources (39.0.1-2) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../29-python3-setuptools_39.0.1-2_all.deb ... Unpacking python3-setuptools (39.0.1-2) ... Selecting previously unselected package sbuild-build-depends-pyhoca-cli-dummy. Preparing to unpack .../30-sbuild-build-depends-pyhoca-cli-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-pyhoca-cli-dummy (0.invalid.0) ... Setting up libarchive-zip-perl (1.60-1) ... Setting up mime-support (3.60) ... Setting up libtimedate-perl (2.3000-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up man2html-base (1.6g-11) ... Setting up groff-base (1.22.3-10) ... Setting up libglib2.0-0:amd64 (2.56.1-2) ... No schema files found: doing nothing. Setting up gettext-base (0.19.8.1-6+b1) ... Setting up libpipeline1:amd64 (1.5.0-1) ... Setting up m4 (1.4.18-1) ... Setting up libicu57:amd64 (57.1-9) ... Setting up libbsd0:amd64 (0.8.7-1) ... Setting up libxml2:amd64 (2.9.4+dfsg1-6.1) ... Setting up libmagic-mgc (1:5.33-2) ... Setting up libmagic1:amd64 (1:5.33-2) ... Setting up libcroco3:amd64 (0.6.12-2) ... Processing triggers for libc-bin (2.27-3) ... Setting up autotools-dev (20180224.1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libncurses6:amd64 (6.1+20180210-2) ... Setting up autopoint (0.19.8.1-6) ... Setting up libmpdec2:amd64 (2.4.2-2) ... Setting up libfile-stripnondeterminism-perl (0.041-1) ... Setting up libpython3.6-stdlib:amd64 (3.6.5~rc1-1) ... Setting up gettext (0.19.8.1-6+b1) ... Setting up autoconf (2.69-11) ... Setting up file (1:5.33-2) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up automake (1:1.15.1-3.1) ... update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode Setting up man-db (2.8.3-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libtool (2.4.6-2.1) ... Setting up libpython3-stdlib:amd64 (3.6.4-1) ... Setting up po-debconf (1.0.20) ... Setting up dh-autoreconf (17) ... Setting up python3 (3.6.4-1) ... Setting up python3-pkg-resources (39.0.1-2) ... Setting up dh-strip-nondeterminism (0.041-1) ... Setting up python3-lib2to3 (3.6.5~rc1-1) ... Setting up dh-python (3.20180326) ... Setting up python3-distutils (3.6.5~rc1-1) ... Setting up debhelper (11.2.1) ... Setting up python3.6 (3.6.5~rc1-1) ... Setting up python3-all (3.6.4-1) ... Setting up python3-setuptools (39.0.1-2) ... Setting up sbuild-build-depends-pyhoca-cli-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.27-3) ... +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.9.0-5-amd64 amd64 (x86_64) Toolchain package versions: binutils_2.30-15 dpkg-dev_1.19.0.5 g++-6_6.4.0-12 g++-7_7.3.0-18 gcc-6_6.4.0-12 gcc-7_7.3.0-18 libc6-dev_2.27-3 libstdc++-6-dev_6.4.0-12 libstdc++-7-dev_7.3.0-18 libstdc++6_8.1.0-1 linux-libc-dev_4.16.5-1 Package versions: adduser_3.117 apt_1.6.1 autoconf_2.69-11 automake_1:1.15.1-3.1 autopoint_0.19.8.1-6 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.45 bash_4.4.18-2 binutils_2.30-15 binutils-common_2.30-15 binutils-x86-64-linux-gnu_2.30-15 bsdmainutils_11.1.2+b1 bsdutils_1:2.31.1-0.5 build-essential_12.4 bzip2_1.0.6-8.1 ccache_3.4.2-1 coreutils_8.28-1 cpp_4:7.2.0-1d1 cpp-6_6.4.0-12 cpp-7_7.3.0-18 dash_0.5.8-2.10 debconf_1.5.66 debhelper_11.2.1 debian-archive-keyring_2017.7 debianutils_4.8.4 dh-autoreconf_17 dh-python_3.20180326 dh-strip-nondeterminism_0.041-1 diffutils_1:3.6-1 dirmngr_2.2.5-1 dpkg_1.19.0.5+b1 dpkg-dev_1.19.0.5 e2fslibs_1.44.1-2 e2fsprogs_1.44.1-2 eatmydata_105-6 fakeroot_1.22-2 fdisk_2.31.1-0.5 file_1:5.33-2 findutils_4.6.0+git+20171230-2 g++_4:7.2.0-1d1 g++-6_6.4.0-12 g++-7_7.3.0-18 gcc_4:7.2.0-1d1 gcc-6_6.4.0-12 gcc-6-base_6.4.0-12 gcc-7_7.3.0-18 gcc-7-base_7.3.0-18 gcc-8-base_8.1.0-1 gettext_0.19.8.1-6+b1 gettext-base_0.19.8.1-6+b1 gnupg_2.2.5-1 gnupg-agent_2.2.5-1 gnupg-l10n_2.2.5-1 gnupg-utils_2.2.5-1 gpg_2.2.5-1 gpg-agent_2.2.5-1 gpg-wks-client_2.2.5-1 gpg-wks-server_2.2.5-1 gpgconf_2.2.5-1 gpgsm_2.2.5-1 gpgv_2.2.5-1 grep_3.1-2 groff-base_1.22.3-10 gzip_1.6-5+b1 hostname_3.20 init-system-helpers_1.51 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3+b1 libapt-pkg5.0_1.6.1 libarchive-zip-perl_1.60-1 libasan3_6.4.0-12 libasan4_7.3.0-18 libassuan0_2.5.1-2 libatomic1_8.1.0-1 libattr1_1:2.4.47-2+b2 libaudit-common_1:2.8.2-1 libaudit1_1:2.8.2-1 libbinutils_2.30-15 libblkid1_2.31.1-0.5 libbsd0_0.8.7-1 libbz2-1.0_1.0.6-8.1 libc-bin_2.27-3 libc-dev-bin_2.27-3 libc6_2.27-3 libc6-dev_2.27-3 libcap-ng0_0.7.9-1 libcc1-0_8.1.0-1 libcilkrts5_7.3.0-18 libcom-err2_1.44.1-2 libcomerr2_1.44.1-2 libcroco3_0.6.12-2 libdb5.3_5.3.28-13.1+b1 libdebconfclient0_0.243 libdpkg-perl_1.19.0.5 libeatmydata1_105-6 libexpat1_2.2.5-3 libext2fs2_1.44.1-2 libfakeroot_1.22-2 libfdisk1_2.31.1-0.5 libffi6_3.2.1-8 libfile-stripnondeterminism-perl_0.041-1 libgcc-6-dev_6.4.0-12 libgcc-7-dev_7.3.0-18 libgcc1_1:8.1.0-1 libgcrypt20_1.8.2-2 libgdbm-compat4_1.14.1-6 libgdbm3_1.8.3-14 libgdbm5_1.14.1-6 libglib2.0-0_2.56.1-2 libgmp10_2:6.1.2+dfsg-3 libgnutls30_3.5.18-1 libgomp1_8.1.0-1 libgpg-error0_1.31-1 libhogweed4_3.4-1 libicu57_57.1-9 libidn2-0_2.0.4-1.1 libisl15_0.18-4 libisl19_0.19-1 libitm1_8.1.0-1 libksba8_1.3.5-2 libldap-2.4-2_2.4.46+dfsg-5 libldap-common_2.4.46+dfsg-5 liblsan0_8.1.0-1 liblz4-1_1.8.1.2-1 liblzma5_5.2.2-1.3 libmagic-mgc_1:5.33-2 libmagic1_1:5.33-2 libmount1_2.31.1-0.5 libmpc3_1.1.0-1 libmpdec2_2.4.2-2 libmpfr4_3.1.5-1 libmpfr6_4.0.1-1 libmpx2_8.1.0-1 libncurses6_6.1+20180210-2 libncursesw5_6.1+20180210-2 libncursesw6_6.1+20180210-2 libnettle6_3.4-1 libnpth0_1.5-3 libp11-kit0_0.23.10-2 libpam-modules_1.1.8-3.7 libpam-modules-bin_1.1.8-3.7 libpam-runtime_1.1.8-3.7 libpam0g_1.1.8-3.7 libpcre3_2:8.39-9 libperl5.26_5.26.2-3 libpipeline1_1.5.0-1 libpython3-stdlib_3.6.4-1 libpython3.6-minimal_3.6.5~rc1-1 libpython3.6-stdlib_3.6.5~rc1-1 libquadmath0_8.1.0-1 libreadline7_7.0-5 libsasl2-2_2.1.27~101-g0780600+dfsg-3.1 libsasl2-modules-db_2.1.27~101-g0780600+dfsg-3.1 libseccomp2_2.3.3-1 libselinux1_2.7-2+b2 libsemanage-common_2.7-2 libsemanage1_2.7-2+b2 libsepol1_2.7-1 libsigsegv2_2.12-2 libsmartcols1_2.31.1-0.5 libsqlite3-0_3.23.1-1 libss2_1.44.1-2 libssl1.1_1.1.0h-2 libstdc++-6-dev_6.4.0-12 libstdc++-7-dev_7.3.0-18 libstdc++6_8.1.0-1 libsystemd0_238-4 libtasn1-6_4.13-2 libtimedate-perl_2.3000-2 libtinfo5_6.1+20180210-2 libtinfo6_6.1+20180210-2 libtool_2.4.6-2.1 libtsan0_8.1.0-1 libubsan0_7.3.0-18 libudev1_238-4 libunistring2_0.9.8-1 libustr-1.0-1_1.0.4-6 libuuid1_2.31.1-0.5 libxml2_2.9.4+dfsg1-6.1 libzstd1_1.3.4+dfsg-3 linux-libc-dev_4.16.5-1 login_1:4.5-1 lsb-base_9.20170808 m4_1.4.18-1 make_4.1-9.1 man-db_2.8.3-2 man2html-base_1.6g-11 mawk_1.3.3-17+b3 mime-support_3.60 mount_2.31.1-0.5 multiarch-support_2.27-3 ncurses-base_6.1+20180210-2 ncurses-bin_6.1+20180210-2 passwd_1:4.5-1 patch_2.7.6-2 perl_5.26.2-3 perl-base_5.26.2-3 perl-modules-5.26_5.26.2-3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.20 python3_3.6.4-1 python3-all_3.6.4-1 python3-distutils_3.6.5~rc1-1 python3-lib2to3_3.6.5~rc1-1 python3-minimal_3.6.4-1 python3-pkg-resources_39.0.1-2 python3-setuptools_39.0.1-2 python3.6_3.6.5~rc1-1 python3.6-minimal_3.6.5~rc1-1 readline-common_7.0-5 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-pyhoca-cli-dummy_0.invalid.0 sed_4.4-2 sensible-utils_0.0.12 sysvinit-utils_2.88dsf-59.10 tar_1.29b-2 tzdata_2018e-1 util-linux_2.31.1-0.5 xz-utils_5.2.2-1.3 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- dpkg-source: warning: extracting unsigned source package (pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+10.heuler.1.dsc) dpkg-source: info: extracting pyhoca-cli in /<<PKGBUILDDIR>> dpkg-source: info: unpacking pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+10.heuler.1.tar.gz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=POSIX LOGNAME=jenkins PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SCHROOT_ALIAS_NAME=buster-amd64-sbuild SCHROOT_CHROOT_NAME=buster-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=jenkins SCHROOT_SESSION_ID=buster-amd64-sbuild-909ddbd9-e5ac-41de-aa66-b6e8941a2d50 SCHROOT_UID=106 SCHROOT_USER=jenkins SHELL=/bin/sh USER=jenkins dpkg-buildpackage ----------------- dpkg-buildpackage: info: source package pyhoca-cli dpkg-buildpackage: info: source version 0.5.99.1-0x2go1~git20180513.251+10.heuler.1 dpkg-buildpackage: info: source distribution buster dpkg-buildpackage: info: source changed by Jenkins <jenkins@japsand.x2go.org> dpkg-source --before-build pyhoca-cli-0.5.99.1 dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean --with=python3 --buildsystem=pybuild debian/rules override_dh_auto_clean make[1]: Entering directory '/<<PKGBUILDDIR>>' rm -Rf PyHoca_CLI.egg-info/ dh_auto_clean I: pybuild base:217: python3.6 setup.py clean Traceback (most recent call last): File "setup.py", line 26, in <module> for line in open(os.path.join('x2go', '__init__.py'),encoding='utf-8').readlines(): FileNotFoundError: [Errno 2] No such file or directory: 'x2go/__init__.py' E: pybuild pybuild:336: clean: plugin distutils failed with: exit code=1: python3.6 setup.py clean dh_auto_clean: pybuild --clean -i python{version} -p 3.6 returned exit code 13 debian/rules:10: recipe for target 'override_dh_auto_clean' failed make[1]: [override_dh_auto_clean] Error 25 (ignored) make[1]: Leaving directory '/<<PKGBUILDDIR>>' dh_clean -O--buildsystem=pybuild dpkg-source -b pyhoca-cli-0.5.99.1 dpkg-source: info: using source format '1.0' dpkg-source: info: building pyhoca-cli in pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+10.heuler.1.tar.gz dpkg-source: info: building pyhoca-cli in pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+10.heuler.1.dsc debian/rules build dh build --with=python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:217: python3.6 setup.py config Traceback (most recent call last): File "setup.py", line 26, in <module> for line in open(os.path.join('x2go', '__init__.py'),encoding='utf-8').readlines(): FileNotFoundError: [Errno 2] No such file or directory: 'x2go/__init__.py' E: pybuild pybuild:336: configure: plugin distutils failed with: exit code=1: python3.6 setup.py config dh_auto_configure: pybuild --configure -i python{version} -p 3.6 returned exit code 13 debian/rules:7: recipe for target 'build' failed make: *** [build] Error 25 dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 -------------------------------------------------------------------------------- Build finished at 2018-05-13T19:00:28Z Finished -------- +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<<BUILDDIR>> Not cleaning session: cloned chroot in use E: Build failure (dpkg-buildpackage died) +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 704 Build-Time: 1 Distribution: buster Fail-Stage: build Host Architecture: amd64 Install-Time: 73 Job: /home/_jenkins_/tmp/tmp.OXq1aBOGGC7wfjrSlDNMlpzJ/pyhoca-cli_0.5.99.1-0x2go1~git20180513.251+10.heuler.1.dsc Machine Architecture: amd64 Package: pyhoca-cli Package-Time: 1642 Source-Version: 0.5.99.1-0x2go1~git20180513.251+10.heuler.1 Space: 704 Status: attempted Version: 0.5.99.1-0x2go1~git20180513.251+10.heuler.1 -------------------------------------------------------------------------------- Finished at 2018-05-13T19:00:28Z Build needed 00:27:22, 704k disk space E: Build failure (dpkg-buildpackage died) + cleanup + typeset temp_dir= + for temp_dir in "${temp_cleanup[@]}" + '[' -n '' ']' + for temp_dir in "${temp_cleanup[@]}" + '[' -n /var/lib/jenkins/tmp/tmp.OXq1aBOGGC7wfjrSlDNMlpzJ ']' + '[' -d /var/lib/jenkins/tmp/tmp.OXq1aBOGGC7wfjrSlDNMlpzJ ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.OXq1aBOGGC7wfjrSlDNMlpzJ Build step 'Execute shell' marked build as failure