This is an automated email from the git hooks/post-receive script. x2go pushed a commit to branch master in repository pinentry-x2go. commit c7fbb0be66d7e8c71d5b53d6ace8706a07c91413 Author: Mike Gabriel <mike.gabriel@das-netzwerkteam.de> Date: Wed Aug 20 15:56:46 2014 +0200 Drop m4/glib.m4. --- debian/changelog | 1 + m4/glib.m4 | 196 ------------------------------------------------------ 2 files changed, 1 insertion(+), 196 deletions(-) diff --git a/debian/changelog b/debian/changelog index 85019a0..8e95e23 100644 --- a/debian/changelog +++ b/debian/changelog @@ -4,6 +4,7 @@ pinentry-x2go (0.7.5.7-0x2go3) UNRELEASED; urgency=low * New upstream version (0.7.5.7): - Set Pinentry title to X2Go Pinpad (was: X2GO ...). - Drop config.h.in. + - Drop m4/glib.m4. - Update German translation file. - Run lrelease during autoreconf. - Update .ts files. Add .ts files for all languages we diff --git a/m4/glib.m4 b/m4/glib.m4 deleted file mode 100644 index b3c632b..0000000 --- a/m4/glib.m4 +++ /dev/null @@ -1,196 +0,0 @@ -# Configure paths for GLIB -# Owen Taylor 97-11-3 - -dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) -dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or -dnl gthread is specified in MODULES, pass to glib-config -dnl -AC_DEFUN([AM_PATH_GLIB], -[dnl -dnl Get the cflags and libraries from the glib-config script -dnl -AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], - glib_config_prefix="$withval", glib_config_prefix="") -AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], - glib_config_exec_prefix="$withval", glib_config_exec_prefix="") -AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], - , enable_glibtest=yes) - - if test x$glib_config_exec_prefix != x ; then - glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" - if test x${GLIB_CONFIG+set} != xset ; then - GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config - fi - fi - if test x$glib_config_prefix != x ; then - glib_config_args="$glib_config_args --prefix=$glib_config_prefix" - if test x${GLIB_CONFIG+set} != xset ; then - GLIB_CONFIG=$glib_config_prefix/bin/glib-config - fi - fi - - for module in . $4 - do - case "$module" in - gmodule) - glib_config_args="$glib_config_args gmodule" - ;; - gthread) - glib_config_args="$glib_config_args gthread" - ;; - esac - done - - AC_PATH_PROG(GLIB_CONFIG, glib-config, no) - min_glib_version=ifelse([$1], ,0.99.7,$1) - AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) - no_glib="" - if test "$GLIB_CONFIG" = "no" ; then - no_glib=yes - else - GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` - GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` - glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_glibtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $GLIB_CFLAGS" - LIBS="$GLIB_LIBS $LIBS" -dnl -dnl Now check if the installed GLIB is sufficiently new. (Also sanity -dnl checks the results of glib-config to some extent -dnl - rm -f conf.glibtest - AC_TRY_RUN([ -#include <glib.h> -#include <stdio.h> -#include <stdlib.h> - -int -main () -{ - int major, minor, micro; - char *tmp_version; - - system ("touch conf.glibtest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = g_strdup("$min_glib_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_glib_version"); - exit(1); - } - - if ((glib_major_version != $glib_config_major_version) || - (glib_minor_version != $glib_config_minor_version) || - (glib_micro_version != $glib_config_micro_version)) - { - printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", - $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, - glib_major_version, glib_minor_version, glib_micro_version); - printf ("*** was found! If glib-config was correct, then it is best\n"); - printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); - printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); - printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); - printf("*** required on your system.\n"); - printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); - printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } - else if ((glib_major_version != GLIB_MAJOR_VERSION) || - (glib_minor_version != GLIB_MINOR_VERSION) || - (glib_micro_version != GLIB_MICRO_VERSION)) - { - printf("*** GLIB header files (version %d.%d.%d) do not match\n", - GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); - printf("*** library (version %d.%d.%d)\n", - glib_major_version, glib_minor_version, glib_micro_version); - } - else - { - if ((glib_major_version > major) || - ((glib_major_version == major) && (glib_minor_version > minor)) || - ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", - glib_major_version, glib_minor_version, glib_micro_version); - printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", - major, minor, micro); - printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); - printf("***\n"); - printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the glib-config shell script is\n"); - printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); - printf("*** correct copy of glib-config. (In this case, you will have to\n"); - printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); - printf("*** so that the correct libraries are found at run-time))\n"); - } - } - return 1; -} -],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_glib" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$GLIB_CONFIG" = "no" ; then - echo "*** The glib-config script installed by GLIB could not be found" - echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the GLIB_CONFIG environment variable to the" - echo "*** full path to glib-config." - else - if test -f conf.glibtest ; then - : - else - echo "*** Could not run GLIB test program, checking why..." - CFLAGS="$CFLAGS $GLIB_CFLAGS" - LIBS="$LIBS $GLIB_LIBS" - AC_TRY_LINK([ -#include <glib.h> -#include <stdio.h> -], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding GLIB or finding the wrong" - echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" - echo "***" - echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" - echo "*** came with the system with the command" - echo "***" - echo "*** rpm --erase --nodeps gtk gtk-devel" ], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means GLIB was incorrectly installed" - echo "*** or that you have moved GLIB since it was installed. In the latter case, you" - echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - GLIB_CFLAGS="" - GLIB_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(GLIB_CFLAGS) - AC_SUBST(GLIB_LIBS) - rm -f conf.glibtest -]) -- Alioth's /srv/git/_hooks_/post-receive-email on /srv/git/code.x2go.org/pinentry-x2go.git