A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/27 17:13 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1482539728 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -218,9 +218,10 @@ These are planned for a future release: * ''updateurl=rsync|http|ftp://your-http-server-ip-or-dns-here/path-to-update-files'' - //not yet implemented//. Will allow you to update an image in the background when using local storage instead of PXE. Download task will start at a randomized interval to avoid unintentional dDOSing of the update server/network infrastructure. The updater will even work when using NTFS for local storage, but only if the //toram// boot option is used. Regardless of NTFS or not, the updater requires three directories: ''/boot/live1, /boot/live2, /boot/live-download'' * ''bwlimit=nnn'' - //not yet implemented//. Will allow you to specify a bandwidth limit (valid values: 1-100) in percent for the backgrounded update task. * ''ntfs-uuid='' - //not yet implemented//. Will be required for updating images stored on NTFS filesystems. - + * ''tcpprint'' - //not yet implemented//. Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same Network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a Laptop roaming between different networks. + * ''tcpprintonlyfrom='' - //not yet implemented//. Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. === Required unless using the X2Go Session Broker: Adding the x2go-tce.sessions session configuration file to your HTTP or FTP Server === Again, this is assuming you already have an existing, working HTTP or FTP server setup. * run X2GoClient on any computer you like, and configure a session the same way it should appear on the ThinClient <note tip>when using a Windows client, run x2goclient.exe --portable, or it will store the session information in the registry, rather than in a "sessions" file.</note> * locate the "sessions" file you just created - it should be at ~/.x2goclient/sessions -- This mail was generated by DokuWiki at http://wiki.x2go.org/