A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/14 19:20 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481740604 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Prerequisites] User : stefanbaur @@ -13,4 +13,17 @@ ==== Prerequisites ==== * You need an existing PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg stuff. This is not covered here, though we might add a separate howto for that some time later on. * You need a Debian Jessie system to build the image. (Other distributions based on Debian might work, but this is untested.) * We suggest using a 64-Bit system, though it should be possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image. + * Make sure your package list is up to date by running: <code>sudo apt-get update </code> + * Install the required packages by running: <code>sudo apt-get install git-core live-build live-config-doc live-manual-html live-boot-doc</code> + + ==== Building your own netbootable X2Go-TCE image ==== + === Starting the build === + Change to a directory where you want to save your builds, and run the following commands:<code> + DIR=./live-build-x2go-$(date +"%Y%m%d%H%M%S") # this will create a timestamped subdirectory + mkdir -p $DIR + cd $DIR + lb config ... + lb build + lb clean # optional command to clean up afterwards -> saves some space + </code> -- This mail was generated by DokuWiki at http://wiki.x2go.org/