x2go-commits December 2016

x2go-commits@lists.x2go.org

3 participants
236 discussions

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 15:51 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481816968 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: User : stefanbaur @@ -150,9 +150,9 @@ * Change to the pxelinux.cfg directory in your tftproot. * create a file x2go-tce there, using the template below and adjusting it to your needs * options ending in "=de" and "=de_DE.UTF-8" should be set to match your desired country/locale setting * options containing "http://your-http-server-ip-here" should be replaced with the proper HTTP or FTP URL for your server - * where it says FURTHER-OPTIONS-GO-HERE, you can (must!) add one or more of the options explained below. All options are separated from the next option using a single blank (space bar), just like the options before that placeholder. + * where it says FURTHER-OPTIONS-GO-HERE, you can (must!) add one or more of the options explained below. All options are separated from the next option using a single blank (space bar), just like the options before that placeholder. **DO NOT** use newlines. All "APPEND" options must be on **one and the same** line. <file - x2go-tce> DEFAULT x2go-tce PROMPT 0 MENU TITLE Linux Boot Menu -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 15:49 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481816935 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -148,9 +148,9 @@ === Adding the configuration files to your Boot Server === Again, this is assuming you already have an existing, working PXE/TFTP server setup. * Change to the pxelinux.cfg directory in your tftproot. * create a file x2go-tce there, using the template below and adjusting it to your needs - * options ending in "=de" and "=de_DE.UTF-8" should be set to match your country/locale setting + * options ending in "=de" and "=de_DE.UTF-8" should be set to match your desired country/locale setting * options containing "http://your-http-server-ip-here" should be replaced with the proper HTTP or FTP URL for your server * where it says FURTHER-OPTIONS-GO-HERE, you can (must!) add one or more of the options explained below. All options are separated from the next option using a single blank (space bar), just like the options before that placeholder. <file - x2go-tce> DEFAULT x2go-tce -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 15:48 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481808943 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Build system prerequisites for all variants] User : stefanbaur @@ -20,9 +20,9 @@ * Capability to boot via PXE //or// sufficient local storage (expect 250-450 MB, depending on what you decide to include) * A graphics card and input devices (Keyboard, Mouse/Trackball/Touchpad/Trackpoint/Touchscreen, ...) that are supported by the stock Debian X Server ===== Build system prerequisites for all variants ===== * You need a Debian Jessie system to build the image. (Other distributions based on Debian might work, but this is untested.) - * We suggest using a 64-Bit system, though it should be possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image. + * We suggest using a 64-Bit system, however, it is possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image. * We suggest leaving at least 4 GB of free disk space so the build won't abort due to insufficient disk space while packages are downloaded, unpacked and copied around. * Make sure your package list is up to date by running: <code>sudo apt-get update </code> * Install the required packages by running: <code>sudo apt-get install git-core lzma live-build live-config-doc live-manual-html live-boot-doc</code> * export the following variables:<code> -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:35 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481808934 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Build system prerequisites for all variants] User : stefanbaur @@ -26,9 +26,9 @@ * Make sure your package list is up to date by running: <code>sudo apt-get update </code> * Install the required packages by running: <code>sudo apt-get install git-core lzma live-build live-config-doc live-manual-html live-boot-doc</code> * export the following variables:<code> # Point this to the git repository you wish to use - export LBX2GO_CONFIG=' git://code.x2go.org/live-build-x2go.git::feature/openbox' + export LBX2GO_CONFIG='git://code.x2go.org/live-build-x2go.git::feature/openbox' # Select ONE of the following LBX2GO_ARCH lines and comment out the others # (feel free to use long or short options) # for 64-Bit builds, use: -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:35 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481808527 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Build system prerequisites for all variants] User : stefanbaur @@ -26,9 +26,9 @@ * Make sure your package list is up to date by running: <code>sudo apt-get update </code> * Install the required packages by running: <code>sudo apt-get install git-core lzma live-build live-config-doc live-manual-html live-boot-doc</code> * export the following variables:<code> # Point this to the git repository you wish to use - export LBX2GO_CONFIG='http://git-server-and-project::branch' + export LBX2GO_CONFIG=' git://code.x2go.org/live-build-x2go.git::feature/openbox' # Select ONE of the following LBX2GO_ARCH lines and comment out the others # (feel free to use long or short options) # for 64-Bit builds, use: -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:28 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481808107 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -319,10 +319,22 @@ } </code> FIXME This page is missing a section/subpage that explains how to retrieve an xorg.conf from a different system. + + Things to try: KNOPPIX Live Linux, other Distribution's Live Images (a recent Fedora or Arch, maybe?) + + Basically, in the running Linux where you have a working X Server on that particular hardware, shut down X, then run Xorg -configure, which should output ~/xorg.conf.new, which could then be saved somewhere else (LAN share, USB stick, ...). FIXME This page is missing a section/subpage that explains how to create images for USB/CD/local storage. + + Basically, proceed as shown for netboot above, but set LBX2GO_IMAGETYPE to iso, iso-hybrid, or hdd. + + Location and name of the output files will vary slightly, so skip the "lb clean" step until you've located them. + + Iso-Hybrid images can be dd'ed directly to a USB stick. + + HDD images mean you might have to jiggle with syslinux or grub. FIXME Some of the optional steps above could be moved to a separate subpage to reduce clutter. FIXME The steps for the build process could probably streamlined into an x2go-tce.deb Debian package -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:21 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481807981 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -290,8 +290,10 @@ initrd http://$FQDN/x2go-tce-initrd.img boot EOF </code> + + After that, create a symlink/symlinks that point from "default" or a part of the MAC or the entire MAC or the hex-encoded IP to x2go-tce-ipxe. Then **add** this to your dhcpd.conf <code> if substring ( option vendor-class-identifier , 19,1 ) = "0" { -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:19 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481807896 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -315,8 +315,10 @@ filename = concat( "http://DNS-name-of-your-server-here/", hwmac ); } </code> + + FIXME This page is missing a section/subpage that explains how to retrieve an xorg.conf from a different system. FIXME This page is missing a section/subpage that explains how to create images for USB/CD/local storage. FIXME Some of the optional steps above could be moved to a separate subpage to reduce clutter. -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:18 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481807794 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -141,9 +141,9 @@ wget -Y off http://your-http-server-ip-here/x2go-tce/x2go-tce-filesystem.squashfs </code> In case of an FTP URL, replace http with ftp in the example above. - **Note that you MUST use an IP address. X2Go-TCE WILL NOT WORK with a DNS name, even though this test here will accept IPs and DNS names alike.** + **Note that you MUST use an IP address. X2Go-TCE WILL NOT WORK with a DNS name, even though this test here will accept IPs and DNS names alike. The only exception is when a template actually spells out that you should input a DNS name.** </note> === Adding the configuration files to your Boot Server === Again, this is assuming you already have an existing, working PXE/TFTP server setup. @@ -168,11 +168,11 @@ APPEND initrd=x2go-tce/initrd.img boot=live components noswap aufs rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rd.driver.pre=loop rd.noverifyssl rd.skipfsck rd.live.overlay.check rd.live.overlay.reset rd.live.ram log_buf_len=1M quickreboot consoleblank=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rootwait=120 silent quiet splash lang=de vconsole.keymap=de keyboard-layouts=de locales=de_DE.UTF-8 noroot nouser fetch=http://your-http-server-ip-here/x2go-tce/filesystem.squashfs FURTHER-OPTIONS-GO-HERE </file> - <note important>These are always required for security reasons, unless you are working on a debug image: - * ''noroot'' - do not allow the local user account on the ThinClient (named "user") to become root, e.g. using sudo **always set this unless you are debugging an image and need to log in locally** - * ''nouser'' - do not allow the local user account on the ThinClient (named "user") to log in at the console or remotely (using password "live") **always set this unless you are debugging an image and need to log in locally** + <note important>**These are always required for security reasons, unless you are working on a debug image:** + * ''noroot'' - do not allow the local user account on the ThinClient (named "user") to become root, e.g. using sudo **Always set this unless you are debugging an image and need to log in locally!** + * ''nouser'' - do not allow the local user account on the ThinClient (named "user") to log in at the console or remotely (using password "live") **Always set this unless you are debugging an image and need to log in locally!** </note> === What options are available under FURTHER-OPTIONS-GO-HERE? === -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 15 Dec '16

15 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/15 13:16 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481807739 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -164,16 +164,18 @@ LABEL x2go-tce TIMEOUT 50 MENU LABEL X2Go-TCE KERNEL x2go-tce/vmlinuz - APPEND initrd=x2go-tce/initrd.img boot=live components noswap aufs rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rd.driver.pre=loop rd.noverifyssl rd.skipfsck rd.live.overlay.check rd.live.overlay.reset rd.live.ram log_buf_len=1M quickreboot consoleblank=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rootwait=120 silent quiet splash lang=de vconsole.keymap=de keyboard-layouts=de locales=de_DE.UTF-8 fetch=http://your-http-server-ip-here/x2go-tce/filesystem.squashfs FURTHER-OPTIONS-GO-HERE + APPEND initrd=x2go-tce/initrd.img boot=live components noswap aufs rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rd.driver.pre=loop rd.noverifyssl rd.skipfsck rd.live.overlay.check rd.live.overlay.reset rd.live.ram log_buf_len=1M quickreboot consoleblank=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rootwait=120 silent quiet splash lang=de vconsole.keymap=de keyboard-layouts=de locales=de_DE.UTF-8 noroot nouser fetch=http://your-http-server-ip-here/x2go-tce/filesystem.squashfs FURTHER-OPTIONS-GO-HERE </file> - === What options are available under FURTHER-OPTIONS-GO-HERE? === - These are always required for security reasons, unless you are working on a debug image: + <note important>These are always required for security reasons, unless you are working on a debug image: * ''noroot'' - do not allow the local user account on the ThinClient (named "user") to become root, e.g. using sudo **always set this unless you are debugging an image and need to log in locally** * ''nouser'' - do not allow the local user account on the ThinClient (named "user") to log in at the console or remotely (using password "live") **always set this unless you are debugging an image and need to log in locally** + </note> + + === What options are available under FURTHER-OPTIONS-GO-HERE? === These two are mutually exclusive, i.e. never put both of them in the same config: * ''sessionsurl=http://your-http-server-ip-here/x2go-demo/x2go-tce.sessions'' - use this to specify a sessions file. You need this unless you are using a session broker. See below for how to add this file to your HTTP or FTP server. * ''broker-url=ssh:<nowiki>//</nowiki>your-broker-address-here'' - this allows you to specify an X2Go Session Broker instead of a sessions file (not limited to an ssh-based broker, works with an http-based broker as well) -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
24
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits December 2016