x2go-commits December 2016

x2go-commits@lists.x2go.org

3 participants
236 discussions

Build failed in Jenkins: x2goserver+nightly+debian-wheezy #320
by jenkins＠x2go.org 25 Feb '17

25 Feb '17

http://jenkins.x2go.org:8080/job/x2goserver+nightly+debian-wheezy/320/Chang…: [mike.gabriel] Fix B/R for x2goserver-x2goagent. We need to break/replace x2goagent (<< ------------------------------------------ [...truncated 8.74 KB...] + l_DIST=debian + l_CODENAMES=wheezy + grep -qs debian + for l_CODENAME in '${l_CODENAMES}' + test -z wheezy + grep wheezy debian:wheezy +++ repeat_str X 24 +++ typeset INPUT=X +++ typeset COUNT=24 +++ typeset ret= +++ typeset -i i=0 +++ '[' 0 -lt 24 ']' ++++ printf X +++ ret=X +++ i=1 +++ '[' 1 -lt 24 ']' ++++ printf X +++ ret=XX +++ i=2 +++ '[' 2 -lt 24 ']' ++++ printf X +++ ret=XXX +++ i=3 +++ '[' 3 -lt 24 ']' ++++ printf X +++ ret=XXXX +++ i=4 +++ '[' 4 -lt 24 ']' ++++ printf X +++ ret=XXXXX +++ i=5 +++ '[' 5 -lt 24 ']' ++++ printf X +++ ret=XXXXXX +++ i=6 +++ '[' 6 -lt 24 ']' ++++ printf X +++ ret=XXXXXXX +++ i=7 +++ '[' 7 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXX +++ i=8 +++ '[' 8 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXX +++ i=9 +++ '[' 9 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXX +++ i=10 +++ '[' 10 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXX +++ i=11 +++ '[' 11 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXX +++ i=12 +++ '[' 12 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXX +++ i=13 +++ '[' 13 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXX +++ i=14 +++ '[' 14 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXX +++ i=15 +++ '[' 15 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXX +++ i=16 +++ '[' 16 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXX +++ i=17 +++ '[' 17 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXX +++ i=18 +++ '[' 18 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXX +++ i=19 +++ '[' 19 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXX +++ i=20 +++ '[' 20 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXX +++ i=21 +++ '[' 21 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXX +++ i=22 +++ '[' 22 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXX +++ i=23 +++ '[' 23 -lt 24 ']' ++++ printf X +++ ret=XXXXXXXXXXXXXXXXXXXXXXXX +++ i=24 +++ '[' 24 -lt 24 ']' +++ printf XXXXXXXXXXXXXXXXXXXXXXXX +++ return 0 ++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/ tmp.XXXXXXXXXXXXXXXXXXXXXXXX + TEMP_DIR=/var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP + temp_cleanup+=("${TEMP_DIR}") + mkdir -p -- /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver + chmod 2770 -Rf -- /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP + cd /var/lib/jenkins/build/heuler/x2goserver + git clone /var/lib/jenkins/build/heuler/x2goserver /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/ Cloning into '/var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver'... done. + cd /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + find /var/lib/jenkins/build/heuler/x2goserver/../ -maxdepth 0 -mindepth 0 -type f + grep -qs 'x2goserver_*.orig.tar.gz' ++ gitrevno + GITREV=1363 + SA_OPTION= + test -f debian/source/format + grep -Eqs '^3.0.*$quilt$$' debian/source/format + '[' -n 4 ']' + '[' 4 -gt 3 ']' + typeset -l codename=wheezy + '[' xwheezy = xsid ']' + typeset numerical_version= + typeset -i tmp_ret=1 + typeset pretty_dist= + '[' -n debian ']' + '[' debian = debian ']' + pretty_dist=Debian ++ debian-codename-to-version.sh wheezy + numerical_version=7 + tmp_ret=0 + '[' -n debian ']' + '[' debian = ubuntu ']' + '[' 0 -ne 0 ']' + '[' -z 7 ']' + '[' xheuler '!=' xmain ']' + mv -- debian/control debian/control.tmp + sed 's,Section:[\ ]*$.*$,Section: heuler/\1,g' debian/control.tmp + '[' heuler '!=' heuler ']' + dch --distribution wheezy --force-distribution -l '~git20161219.1363+7.heuler.' 'Development-Snapshot!!! Auto-built Debian wheezy (7) package for packages.x2go.org repository (Git commit: 5d9df9b6a3e2dbf6ae2fe70da65f830920d3d792).' dch warning: Recognised distributions are: unstable, testing, stable, oldstable, experimental, {testing-,stable-,oldstable-,}proposed-updates, {testing,stable,oldstable}-security, wheezy-backports, jessie-backports and UNRELEASED. Using your request anyway. + '[' debian = raspbian ']' + mkdir -p -- /var/lib/jenkins/pkg-dist/heuler/x2goserver/debian/wheezy/amd64 /var/lib/jenkins/pkg-dist/heuler/x2goserver/debian/wheezy/i386 + OTHERMIRROR= + '[' xheuler = xheuler ']' + grep -qs x2goserver + OTHERMIRROR='deb http://packages.x2go.org/debian wheezy main heuler' + '[' x2goserver = x2gomatebindings ']' + git --no-pager log --since '2 years ago' '--format=%ai %aN (%h) %n%n%x09*%w(68,0,10) %s%d%n' + typeset -a sbuild_options + sbuild_options=("-n" "--jobs=2" "-sA" "--dist=${codename}" "--keyid=${GPG_KEY}" "--build-dep-resolver=aptitude") + '[' -n '' ']' + '[' -n 'deb http://packages.x2go.org/debian wheezy main heuler' ']' + sbuild_options+=("--extra-repository=${OTHERMIRROR}") + typeset -a sbuild_options_64 sbuild_options_32 sbuild_options_armhf + sbuild_options_64=("${sbuild_options[@]}") + sbuild_options_32=("${sbuild_options[@]}" "--arch=i386" "--debbuildopts=-B") + sbuild_options_armhf=("${sbuild_options[@]}" "--arch=armhf" "--chroot=${codename}-armhf-raspbian-sbuild") + '[' debian = raspbian ']' + '[' x '!=' xamd64 ']' + grep -Eqs 'Architecture.*(all|any|amd64)' /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/debian/control + cd /var/lib/jenkins/pkg-dist/heuler/x2goserver/debian/wheezy/amd64 + nice sbuild -n --jobs=2 -sA --dist=wheezy --keyid=F4A7678C9C6B0B2B --build-dep-resolver=aptitude '--extra-repository=deb http://packages.x2go.org/debian wheezy main heuler' /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver PREFIX=/usr NXLIBDIR="/usr/lib/x86_64-linux-gnu/nx" dh clean dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' rm -f ChangeLog rm -Rfv x2goserver/.build_html rm -Rfv x2goserver-extensions/.build_html rm -f ChangeLog.gitlog rm -f MYMETA.yml rm -f Makefile.perl.old PREFIX=/usr NXLIBDIR="/usr/lib/x86_64-linux-gnu/nx" dh_auto_clean make[2]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' make -f Makefile.perl realclean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' make[3]: Makefile.perl: No such file or directory make[3]: *** No rule to make target 'Makefile.perl'. Stop. make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' Makefile:42: recipe for target 'distclean' failed make[2]: [distclean] Error 2 (ignored) make -C x2goserver-common clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-common' rm -Rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-common' make -C x2goserver clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver' rm -Rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver' make -C libx2go-server-db-perl clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/libx2go-server-db-perl' rm -f lib/libx2go-server-db-sqlite3-wrapper make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/libx2go-server-db-perl' make -C x2goserver-x2goagent clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-x2goagent' rm -rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-x2goagent' make -C x2goserver-printing clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-printing' rm -rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-printing' make -C x2goserver-extensions clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-extensions' rm -rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-extensions' make -C x2goserver-xsession clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-xsession' make[3]: Nothing to be done for 'clean'. make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-xsession' make -C x2goserver-fmbindings clean make[3]: Entering directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-fmbindings' rm -rf `dirname .build_man2html/html` make[3]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver/x2goserver-fmbindings' make[2]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' rm -f Makefile.perl make[1]: Leaving directory '/home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver' dh_clean dpkg-source: warning: source directory 'x2goserver' is not <sourcepackage>-<upstreamversion> 'x2goserver-4.1.0.0' dpkg-source: info: using source format `1.0' dpkg-source: info: building x2goserver in x2goserver_4.1.0.0-0x2go1.2~git20161219.1363+7.heuler.1.tar.gz tar: x2goserver/.git/objects/a5/124cea8fd18e95da94c6075111e1cce7c0abdb: file changed as we read it dpkg-source: error: tar -cf - gave error exit status 1 E: Failed to package source directory /home/_jenkins_/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP/x2goserver + cleanup + typeset temp_dir= + for temp_dir in '"${temp_cleanup[@]}"' + '[' -n '' ']' + for temp_dir in '"${temp_cleanup[@]}"' + '[' -n /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP ']' + '[' -d /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP ']' + rm -Rf -- /var/lib/jenkins/tmp/tmp.1Jd2pSZsRqjcwUNLmjW2jGdP Build step 'Execute shell' marked build as failure

1 2

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 20:59 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483217807 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -390,8 +390,10 @@ Iso-Hybrid images can be dd'ed directly to a USB stick. HDD images mean you might have to jiggle with syslinux or grub. + + FIXME This page is missing a section/subpage that explains how the autoupdate process works with NTFS-formatted local storage (requires using ''toram findiso=/path/to/iso/'') FIXME Some of the optional steps above could be moved to a separate subpage to reduce clutter. FIXME The steps for the build process could probably streamlined into an x2go-tcebuilder.deb Debian package -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 20:56 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483209206 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [List of open ToDos/FIXMEs for this page] User : stefanbaur @@ -390,11 +390,8 @@ Iso-Hybrid images can be dd'ed directly to a USB stick. HDD images mean you might have to jiggle with syslinux or grub. - - FIXME to allow booting to RAM from NTFS, the squashfs must be wrapped into an ISO and used with "toram findiso=". This ISO only needs to contain a folder "live" with the content "filesystem.squashfs", like so: - <code>genisoimage -o /output-path/for/squashfs-only.iso -R -J -graft-points live/filesystem.squashfs=/path/to/x2go-tce-filesystem.squashfs</code> FIXME Some of the optional steps above could be moved to a separate subpage to reduce clutter. FIXME The steps for the build process could probably streamlined into an x2go-tcebuilder.deb Debian package -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:33 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208635 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: User : stefanbaur @@ -188,8 +188,16 @@ * create a file x2go-tce there, using the template below and adjusting it to your needs * options ending in "=de" and "=de_DE.UTF-8" should be set to match your desired country/locale setting * options containing "http://your-http-server-ip-here" should be replaced with the proper HTTP or FTP URL for your server * where it says FURTHER-OPTIONS-GO-HERE, you can (must!) add one or more of the options explained below. All options are separated from the next option using a single blank (space bar), just like the options before that placeholder. **DO NOT** use newlines. All "APPEND" options must be on **one and the same** line. + + <note tip>To have different hostnames for each thin client: + * assign DNS names for your thin clients + * set your DHCP server to reply to "request host-name" requests from dhclient + * use ''hostname=localhost'' as shown above. + + If you remove ''hostname=localhost'' entirely, all thin clients will share the hostname ''debian'', which is the Debian-Live default host name. Similarly, if you set ''hostname=someothervalue'', all thin clients booting this configuration will share the hostname ''someothervalue''. + </note> <file - x2go-tce> DEFAULT x2go-tce PROMPT 0 MENU TITLE Linux Boot Menu @@ -201,12 +209,11 @@ LABEL x2go-tce TIMEOUT 50 MENU LABEL X2Go-TCE KERNEL x2go-tce/vmlinuz - APPEND initrd=x2go-tce/initrd.img boot=live components noswap aufs rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rd.driver.pre=loop rd.noverifyssl rd.skipfsck rd.live.overlay.check rd.live.overlay.reset rd.live.ram log_buf_len=1M quickreboot consoleblank=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rootwait=120 silent quiet splash lang=de vconsole.keymap=de keyboard-layouts=de locales=de_DE.UTF-8 noroot nouser fetch=http://your-http-server-ip-here/x2go-tce/x2go-tce-filesystem.squashfs FURTHER-OPTIONS-GO-HERE + APPEND initrd=x2go-tce/initrd.img boot=live components noswap aufs rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rd.driver.pre=loop rd.noverifyssl rd.skipfsck rd.live.overlay.check rd.live.overlay.reset rd.live.ram log_buf_len=1M quickreboot consoleblank=0 kernel.sysrq=1 keep_bootcon sysrq_always_enabled rootwait=120 silent quiet splash lang=de vconsole.keymap=de keyboard-layouts=de locales=de_DE.UTF-8 hostname=localhost noroot nouser fetch=http://your-http-server-ip-here/x2go-tce/x2go-tce-filesystem.squashfs FURTHER-OPTIONS-GO-HERE </file> - <note important>**These are always required for security reasons, unless you are working on a debug image:** * ''noroot'' - do not allow the local user account on the ThinClient (named "user") to become root, e.g. using sudo **Always set this unless you are debugging an image and need to log in locally!** * ''nouser'' - do not allow the local user account on the ThinClient (named "user") to log in at the console or remotely (using password "live") **Always set this unless you are debugging an image and need to log in locally!** </note> -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:23 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208290 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Setting up your own netbootable X2Go-TCE environment] User : stefanbaur @@ -226,8 +226,9 @@ * ''ldap1=ldap-backupserver-1.example.com:389'' - this allows you to specify the first of up to two LDAP backup servers when using LDAP authentication * ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication These are planned for a future release: + * ''noblank'' - //not yet implemented//. Will disable screensaver and DPMS Power Saving Mode. * ''updateurl=rsync|http|ftp://your-http-server-ip-or-dns-here/path-to-update-files'' - //not yet implemented//. Will allow you to update an image in the background when using local storage instead of PXE. Download task will start at a randomized interval to avoid unintentional dDOSing of the update server/network infrastructure. The updater will even work when using NTFS for local storage, but only if the //toram// boot option is used. Regardless of NTFS or not, the updater requires three directories: ''/boot/live1, /boot/live2, /boot/live-download'' * ''bwlimit=nnn'' - //not yet implemented//. Will allow you to specify a bandwidth limit (valid values: 1-100) in percent for the backgrounded update task. * ''ntfs-uuid='' - //not yet implemented//. Will be required for updating images stored on NTFS filesystems. * ''tcpprint'' - //not yet implemented//. Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same Network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a Laptop roaming between different networks. -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:18 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208259 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Prerequisites] User : stefanbaur @@ -145,9 +145,9 @@ * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored. This is not covered here, though we might add a separate howto for that some time later on. * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image. * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well. * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer. - * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#build_system_prerequisites_for_all_variants|Build system prerequisites for all variants]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default) + * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#build_system_prerequisites_for_all_variants|Build system prerequisites for all variants]] - make sure to choose ''export LBX2GO_IMAGETYPE='netboot''' (this should be the default) ==== Setting up your own netbootable X2Go-TCE environment ==== === Adding the X2Go-TCE files to your Boot and Web Server(s) === -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:17 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208211 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Prerequisites] User : stefanbaur @@ -145,9 +145,9 @@ * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored. This is not covered here, though we might add a separate howto for that some time later on. * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image. * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well. * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer. - * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#building_your_own_x2go-tce_image]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default) + * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#build_system_prerequisites_for_all_variants|Build system prerequisites for all variants]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default) ==== Setting up your own netbootable X2Go-TCE environment ==== === Adding the X2Go-TCE files to your Boot and Web Server(s) === -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:16 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208014 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Prerequisites] User : stefanbaur @@ -145,8 +145,9 @@ * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored. This is not covered here, though we might add a separate howto for that some time later on. * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image. * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB, and some TFTP clients have problems with that as well. * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer. + * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#building_your_own_x2go-tce_image]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default) ==== Setting up your own netbootable X2Go-TCE environment ==== === Adding the X2Go-TCE files to your Boot and Web Server(s) === -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[[X2Go Wiki]] page changed: doc:howto:tce
by wiki-admin＠x2go.org 31 Dec '16

31 Dec '16

A page in your DokuWiki was added or changed. Here are the details: Date : 2016/12/31 18:13 Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 IP-Address : 78.43.90.159 Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1482858832 New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce Edit Summary: [Build system prerequisites for all variants] User : stefanbaur @@ -42,16 +42,26 @@ export LBX2GO_ARCH='--architectures i386 --linux-flavours 586' # These options are meant to reduce the image size. # Feel free to adapt them after consulting "man lb_config" - export LBX2GO_SPACE='--checksums none --apt-indices none --cache false - --win32-loader false --memtest none - --firmware-binary false' + export LBX2GO_SPACE='--apt-indices none + --apt-recommends true + --cache false + --checksums none + --firmware-binary false + --memtest none + --win32-loader false' + # Note: you can safely set "--apt-recommends false" if + # you are using the github.com/LinuxHaus/ repository + # The official repository will follow soon. # These are default values that should not require tuning - export LBX2GO_DEFAULTS='--initsystem sysvinit --security true --updates true - --apt-recommends true --firmware-chroot true - --backports true' + export LBX2GO_DEFAULTS='--backports true + --firmware-chroot true + --initsystem sysvinit + --security true + --updates true' + export LBX2GO_ARCHIVE_AREAS="main contrib non-free" # Select ONE of the following LBX2GO_IMAGETYPE lines and comment out the others # to create an iso image: -- This mail was generated by DokuWiki at http://wiki.x2go.org/

1 0

[x2goclient] branch bugfix/osx updated (ff6231c -> f6351af)
by git-admin＠x2go.org 31 Dec '16

31 Dec '16

This is an automated email from the git hooks/post-receive script. x2go pushed a change to branch bugfix/osx in repository x2goclient. from ff6231c src/onmainwindow.cpp: convert piece of code to non-Windows and non-Darwin, so that not only Linux but other operating systems are covered as well. new 64edec6 src/mediawidget.cpp: unify some redundant code. new 4f5a879 src/mediawidget.cpp: simplify expression. new 8a8713e src/mediawidget.cpp: add deprecation warning for ARTS. new f6351af src/mediawidget.cpp: add deprecation warning for ESounD. The 4 revisions listed above as "new" are entirely new to this repository and will be described in separate emails. The revisions listed as "adds" were already present in the repository and have only been added to this reference. Summary of changes: debian/changelog | 4 ++++ src/mediawidget.cpp | 24 +++++++++++++++++------- 2 files changed, 21 insertions(+), 7 deletions(-) -- Alioth's /srv/git/code.x2go.org/x2goclient.git//..//_hooks_/post-receive-email on /srv/git/code.x2go.org/x2goclient.git

1 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

x2go-commits December 2016