[X2Go-User] x2go printer howto

[Mike Gabriel]

Hi Neal,

make sure sshfs works on the server, then X2Go printing should work.

The x2goprint user is used internally by x2goserver-printing and cups-x2go. The required file permission scheme is quite versatile and might be broken on the Fedora packages.

Can you provide a list of files shipped by cups-x2go and x2goserver-printing and list each file's file permissions and ownerships? That would help and then I can take a look.

Also include permissions in ~x2goprint/ .

Thanks
Mike

-- 

DAS-NETZWERKTEAM
mike gabriel, herweg 7, 24357 fleckeby
fon: +49 (1520) 1976148

GnuPG Key ID 0x25771B13
mail: mike.gabriel at das-netzwerkteam.de, http://das-netzwerkteam.de


----- Original message -----
> Just to clarify, my question is, is group fuse used   by x2goprint on
> fedora 20, which does not seem to otherwise use a fuse group?   If so, I
> could just try making one - but then if that's the case x2goprint rpm
> should have done this - or else it should require the package that does.
> 
> 
> On Thu, May 15, 2014 at 7:27 AM, Neal Becker <ndbecker2 at gmail.com> wrote:
> 
> > I'm not sure fedora uses a fuse group.   I have several fuse packages
> > installed but no fuse group.   There is no package called fuse-utils on
> > fedora.
> > I see there is a group x2goprint on the server - I'm wondering if
> > perhaps this group is used instead?
> > 
> > 
> > On Thu, May 15, 2014 at 7:20 AM, Mike Gabriel <
> > mike.gabriel at das-netzwerkteam.de> wrote:
> > 
> > > Hi Neal,
> > > 
> > > On Debian you have to install the fuse-utils package to get that
> > > group...
> > > 
> > > Mike
> > > 
> > > --
> > > 
> > > DAS-NETZWERKTEAM
> > > mike gabriel, herweg 7, 24357 fleckeby
> > > fon: +49 (1520) 1976148
> > > 
> > > GnuPG Key ID 0x25771B13
> > > mail: mike.gabriel at das-netzwerkteam.de, http://das-netzwerkteam.de
> > > 
> > > 
> > > ----- Original message -----
> > > > There is no fuse group on the server.
> > > > There is not on the client either, although the client does use
> > > > fuse.
> > > > 
> > > > Are you sure there is a fuse group on fedora 20?
> > > > 
> > > > 
> > > > On Thu, May 15, 2014 at 2:15 AM, Mike Gabriel <
> > > > mike.gabriel at das-netzwerkteam.de> wrote:
> > > > 
> > > > > Hi Neal,
> > > > > 
> > > > > On     Mi 14 Mai 2014 15:02:10 CEST, Neal Becker wrote:
> > > > > 
> > > > > client and server are both fedora 20.
> > > > > > 
> > > > > > I install cups-x2go on server (and x2goserver-printing).
> > > > > > 
> > > > > > I setup a cups-x2go printer on server on kde environment.
> > > > > > 
> > > > > > On the client I resumed session, with printing enabled (I did
> > > > > > not
> > > try
> > > > > > starting a
> > > > > > new session).
> > > > > > 
> > > > > > On server, I can open kde printer settings and try printing a
> > > > > > test page. It
> > > > > > seems successful.
> > > > > > 
> > > > > > Nothing is printed.
> > > > > > 
> > > > > > How to debug?
> > > > > > 
> > > > > 
> > > > > Raise the debug level in /etc/cups/cups-x2go.conf and in
> > > > > /etc/x2go/x2goserver.conf. Also: use pyhoca-gui with the
> > > > > --libdebug cmdline options (PyHoca-GUI is much more verbose and
> > > > > informative with such problems compared to X2Go Client).
> > > > > 
> > > > > Also: make sure that you users that shall print are in group
> > > > > "fuse" on the server.
> > > > > 
> > > > > Regards,
> > > > > Mike
> > > > > 
> > > > > --
> > > > > 
> > > > > DAS-NETZWERKTEAM
> > > > > mike gabriel, herweg 7, 24357 fleckeby
> > > > > fon: +49 (1520) 1976 148
> > > > > 
> > > > > GnuPG Key ID 0x25771B31
> > > > > mail: mike.gabriel at das-netzwerkteam.de,
> > > > > http://das-netzwerkteam.de
> > > > > 
> > > > > freeBusy:
> > > > > https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-
> > > > > netzwerkteam.de.xfb
> > > > > 
> > > 
> > > 
> >