[X2Go-Commits] Build failed in Jenkins: nx-libs+nightly+fedora-26 #81
jenkins at x2go.org
jenkins at x2go.org
Thu Feb 23 12:59:16 CET 2023
See <https://jenkins.x2go.org:8443/job/nx-libs+nightly+fedora-26/81/display/redirect?page=changes>
Changes:
[ionic] nx-libs.spec: fix nxdialog hashbang selection, especially on *SuSE.
------------------------------------------
[...truncated 1.53 MB...]
++ printf '%s%s\n' /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/ /nx-X11/extensions
+ install -pm0644 nx-X11/.build-exports/include/nx-X11/extensions/XI.h nx-X11/.build-exports/include/nx-X11/extensions/XIproto.h nx-X11/.build-exports/include/nx-X11/extensions/XKB.h nx-X11/.build-exports/include/nx-X11/extensions/XKBconfig.h nx-X11/.build-exports/include/nx-X11/extensions/XKBgeom.h nx-X11/.build-exports/include/nx-X11/extensions/XKBproto.h nx-X11/.build-exports/include/nx-X11/extensions/XKBsrv.h nx-X11/.build-exports/include/nx-X11/extensions/XKBstr.h nx-X11/.build-exports/include/nx-X11/extensions/XKM.h nx-X11/.build-exports/include/nx-X11/extensions/XKMformat.h nx-X11/.build-exports/include/nx-X11/extensions/XResproto.h nx-X11/.build-exports/include/nx-X11/extensions/Xdbeproto.h nx-X11/.build-exports/include/nx-X11/extensions/Xv.h nx-X11/.build-exports/include/nx-X11/extensions/XvMC.h nx-X11/.build-exports/include/nx-X11/extensions/XvMCproto.h nx-X11/.build-exports/include/nx-X11/extensions/Xvproto.h nx-X11/.build-exports/include/nx-X11/extensions/bigreqstr.h nx-X11/.build-exports/include/nx-X11/extensions/composite.h nx-X11/.build-exports/include/nx-X11/extensions/compositeproto.h nx-X11/.build-exports/include/nx-X11/extensions/damageproto.h nx-X11/.build-exports/include/nx-X11/extensions/damagewire.h nx-X11/.build-exports/include/nx-X11/extensions/dpms.h nx-X11/.build-exports/include/nx-X11/extensions/dpmsstr.h nx-X11/.build-exports/include/nx-X11/extensions/panoramiXext.h nx-X11/.build-exports/include/nx-X11/extensions/panoramiXproto.h nx-X11/.build-exports/include/nx-X11/extensions/randr.h nx-X11/.build-exports/include/nx-X11/extensions/randrproto.h nx-X11/.build-exports/include/nx-X11/extensions/record.h nx-X11/.build-exports/include/nx-X11/extensions/recordstr.h nx-X11/.build-exports/include/nx-X11/extensions/render.h nx-X11/.build-exports/include/nx-X11/extensions/renderproto.h nx-X11/.build-exports/include/nx-X11/extensions/saver.h nx-X11/.build-exports/include/nx-X11/extensions/saverproto.h nx-X11/.build-exports/include/nx-X11/extensions/security.h nx-X11/.build-exports/include/nx-X11/extensions/securstr.h nx-X11/.build-exports/include/nx-X11/extensions/shapeconst.h nx-X11/.build-exports/include/nx-X11/extensions/sync.h nx-X11/.build-exports/include/nx-X11/extensions/syncstr.h nx-X11/.build-exports/include/nx-X11/extensions/xcmiscstr.h nx-X11/.build-exports/include/nx-X11/extensions/xf86bigfont.h nx-X11/.build-exports/include/nx-X11/extensions/xf86bigfproto.h nx-X11/.build-exports/include/nx-X11/extensions/xfixesproto.h nx-X11/.build-exports/include/nx-X11/extensions/xfixeswire.h nx-X11/.build-exports/include/nx-X11/extensions/xtestconst.h nx-X11/.build-exports/include/nx-X11/extensions/xteststr.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include//nx-X11/extensions/
+ read dirname
++ string_rep nx-X11/.build-exports/include/GL nx-X11/.build-exports/include /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/
++ in=nx-X11/.build-exports/include/GL
++ unset out
++ test -n nx-X11/.build-exports/include
++ true
++ case "$in" in
++ :
++ out=/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/
++ in=/GL
++ true
++ case "$in" in
++ break
++ printf '%s%s\n' /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/ /GL
+ install -dm0755 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include//GL
++ string_rep nx-X11/.build-exports/include/GL nx-X11/.build-exports/include /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/
++ in=nx-X11/.build-exports/include/GL
++ unset out
++ test -n nx-X11/.build-exports/include
++ true
++ case "$in" in
++ :
++ out=/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/
++ in=/GL
++ true
++ case "$in" in
++ break
++ printf '%s%s\n' /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/ /GL
+ install -pm0644 nx-X11/.build-exports/include/GL/gl.h nx-X11/.build-exports/include/GL/glext.h nx-X11/.build-exports/include/GL/glx.h nx-X11/.build-exports/include/GL/glxext.h nx-X11/.build-exports/include/GL/glxint.h nx-X11/.build-exports/include/GL/glxmd.h nx-X11/.build-exports/include/GL/glxproto.h nx-X11/.build-exports/include/GL/glxtokens.h nx-X11/.build-exports/include/GL/osmesa.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include//GL/
+ read dirname
install -dm0755 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64//etc/nxagent
install -pm0644 etc/keystrokes.cfg /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64//etc/nxagent/
install -dm0755 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx
install -pm0644 VERSION /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/VERSION.nxagent
install -pm0644 VERSION /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/VERSION.nxproxy
make -C nx-X11/lib install
make[2]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
Making install in modules
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
Making install in im
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
Making install in ximcp
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im/ximcp'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im/ximcp'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im/ximcp'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im/ximcp'
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/im'
Making install in lc
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
Making install in Utf8
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/Utf8'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/Utf8'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/Utf8'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/Utf8'
Making install in def
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/def'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/def'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/def'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/def'
Making install in gen
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/gen'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/gen'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/gen'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc/gen'
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/lc'
Making install in om
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
Making install in generic
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om/generic'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om/generic'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om/generic'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om/generic'
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules/om'
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/modules'
Making install in src
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
cd util && make
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
make install-recursive
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
Making install in util
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/util'
Making install in xcms
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xcms'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xcms'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/X11'
/usr/bin/install -c -m 644 Xcms.txt '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/X11'
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xcms'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xcms'
Making install in xlibi18n
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xlibi18n'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xlibi18n'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xlibi18n'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xlibi18n'
Making install in xkb
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xkb'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xkb'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xkb'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src/xkb'
make[5]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
make[6]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64'
/bin/sh ../libtool --mode=install /usr/bin/install -c libNX_X11.la '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64'
libtool: warning: relinking 'libNX_X11.la'
libtool: install: (cd /builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src; /bin/sh "/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/libtool" --tag CC --mode=relink gcc -DHASXDMAUTH -DMALLOC_0_RETURNS_NULL -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -version-number 6:3:0 -no-undefined -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libNX_X11.la -rpath /usr/lib64 AllCells.lo AllowEv.lo AllPlanes.lo AuDispose.lo AuFileName.lo AuGetBest.lo AuRead.lo AutoRep.lo Backgnd.lo BdrWidth.lo Bell.lo Border.lo ChAccCon.lo ChActPGb.lo ChClMode.lo ChCmap.lo ChGC.lo ChKeyCon.lo ChkIfEv.lo ChkMaskEv.lo ChkTypEv.lo ChkTypWEv.lo ChkWinEv.lo ChPntCon.lo ChProp.lo ChSaveSet.lo ChWAttrs.lo ChWindow.lo CirWin.lo CirWinDn.lo CirWinUp.lo ClDisplay.lo ClearArea.lo Clear.lo ConfWind.lo ConnDis.lo Context.lo ConvSel.lo CopyArea.lo CopyCmap.lo CopyGC.lo CopyPlane.lo CrBFData.lo CrCmap.lo CrCursor.lo CrGC.lo CrGlCur.lo CrPFBData.lo CrPixmap.lo CrWindow.lo Cursor.lo DefCursor.lo DelProp.lo Depths.lo DestSubs.lo DestWind.lo DisName.lo DrArc.lo DrArcs.lo DrLine.lo DrLines.lo DrPoint.lo DrPoints.lo DrRect.lo DrRects.lo DrSegs.lo ErrDes.lo ErrHndlr.lo evtomask.lo EvToWire.lo FetchName.lo FillArc.lo FillArcs.lo FillPoly.lo FillRct.lo FillRcts.lo FilterEv.lo Flush.lo Font.lo FontInfo.lo FontNames.lo FreeCmap.lo FreeCols.lo FreeCurs.lo FreeEData.lo FreeEventData.lo FreeGC.lo FreePix.lo FSSaver.lo FSWrap.lo GCMisc.lo Geom.lo GetAtomNm.lo GetColor.lo GetDflt.lo GetEventData.lo GetFPath.lo GetFProp.lo GetGCVals.lo GetGeom.lo GetHColor.lo GetHints.lo GetIFocus.lo GetImage.lo GetKCnt.lo GetMoEv.lo GetNrmHint.lo GetPCnt.lo GetPntMap.lo GetProp.lo GetRGBCMap.lo GetSOwner.lo GetSSaver.lo GetStCmap.lo GetTxtProp.lo GetWAttrs.lo GetWMCMapW.lo GetWMProto.lo globals.lo GrButton.lo GrKeybd.lo GrKey.lo GrPointer.lo GrServer.lo Host.lo Iconify.lo IfEvent.lo imConv.lo ImText16.lo ImText.lo ImUtil.lo InitExt.lo InsCmap.lo IntAtom.lo KeyBind.lo KeysymStr.lo KillCl.lo LiHosts.lo LiICmaps.lo LiProps.lo ListExt.lo LoadFont.lo LockDis.lo locking.lo LookupCol.lo LowerWin.lo Macros.lo MapRaised.lo MapSubs.lo MapWindow.lo MaskEvent.lo Misc.lo ModMap.lo MoveWin.lo NextEvent.lo OCWrap.lo OMWrap.lo OpenDis.lo ParseCmd.lo ParseCol.lo ParseGeom.lo PeekEvent.lo PeekIfEv.lo Pending.lo PixFormats.lo PmapBgnd.lo PmapBord.lo PolyReg.lo PolyTxt16.lo PolyTxt.lo PropAlloc.lo PutBEvent.lo PutImage.lo Quarks.lo QuBest.lo QuColor.lo QuColors.lo QuCurShp.lo QuExt.lo QuKeybd.lo QuPntr.lo QuStipShp.lo QuTextE16.lo QuTextExt.lo QuTileShp.lo QuTree.lo RaiseWin.lo RdBitF.lo RecolorC.lo ReconfWin.lo ReconfWM.lo Region.lo RegstFlt.lo RepWindow.lo RestackWs.lo RotProp.lo ScrResStr.lo SelInput.lo SendEvent.lo SetBack.lo SetClMask.lo SetClOrig.lo SetCRects.lo SetDashes.lo SetFont.lo SetFore.lo SetFPath.lo SetFunc.lo SetHints.lo SetIFocus.lo SetLocale.lo SetLStyle.lo SetNrmHint.lo SetPMask.lo SetPntMap.lo SetRGBCMap.lo SetSOwner.lo SetSSaver.lo SetState.lo SetStCmap.lo SetStip.lo SetTile.lo SetTSOrig.lo SetTxtProp.lo SetWMCMapW.lo SetWMProto.lo StBytes.lo StColor.lo StColors.lo StName.lo StNColor.lo StrKeysym.lo StrToText.lo Sync.lo Synchro.lo Text16.lo Text.lo TextExt16.lo TextExt.lo TextToStr.lo TrCoords.lo UndefCurs.lo UngrabBut.lo UngrabKbd.lo UngrabKey.lo UngrabPtr.lo UngrabSvr.lo UninsCmap.lo UnldFont.lo UnmapSubs.lo UnmapWin.lo VisUtil.lo WarpPtr.lo Window.lo WinEvent.lo Withdraw.lo WMGeom.lo WMProps.lo WrBitF.lo XlibAsync.lo XlibInt.lo Xrm.lo x11_trans.lo xlibi18n/libi18n.la xcms/libxcms.la xkb/libxkb.la -lXdmcp -L../../../nxcomp/src/.libs -lXcomp -ldl -inst-prefix-dir /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64)
libtool: relink: gcc -shared -fPIC -DPIC .libs/AllCells.o .libs/AllowEv.o .libs/AllPlanes.o .libs/AuDispose.o .libs/AuFileName.o .libs/AuGetBest.o .libs/AuRead.o .libs/AutoRep.o .libs/Backgnd.o .libs/BdrWidth.o .libs/Bell.o .libs/Border.o .libs/ChAccCon.o .libs/ChActPGb.o .libs/ChClMode.o .libs/ChCmap.o .libs/ChGC.o .libs/ChKeyCon.o .libs/ChkIfEv.o .libs/ChkMaskEv.o .libs/ChkTypEv.o .libs/ChkTypWEv.o .libs/ChkWinEv.o .libs/ChPntCon.o .libs/ChProp.o .libs/ChSaveSet.o .libs/ChWAttrs.o .libs/ChWindow.o .libs/CirWin.o .libs/CirWinDn.o .libs/CirWinUp.o .libs/ClDisplay.o .libs/ClearArea.o .libs/Clear.o .libs/ConfWind.o .libs/ConnDis.o .libs/Context.o .libs/ConvSel.o .libs/CopyArea.o .libs/CopyCmap.o .libs/CopyGC.o .libs/CopyPlane.o .libs/CrBFData.o .libs/CrCmap.o .libs/CrCursor.o .libs/CrGC.o .libs/CrGlCur.o .libs/CrPFBData.o .libs/CrPixmap.o .libs/CrWindow.o .libs/Cursor.o .libs/DefCursor.o .libs/DelProp.o .libs/Depths.o .libs/DestSubs.o .libs/DestWind.o .libs/DisName.o .libs/DrArc.o .libs/DrArcs.o .libs/DrLine.o .libs/DrLines.o .libs/DrPoint.o .libs/DrPoints.o .libs/DrRect.o .libs/DrRects.o .libs/DrSegs.o .libs/ErrDes.o .libs/ErrHndlr.o .libs/evtomask.o .libs/EvToWire.o .libs/FetchName.o .libs/FillArc.o .libs/FillArcs.o .libs/FillPoly.o .libs/FillRct.o .libs/FillRcts.o .libs/FilterEv.o .libs/Flush.o .libs/Font.o .libs/FontInfo.o .libs/FontNames.o .libs/FreeCmap.o .libs/FreeCols.o .libs/FreeCurs.o .libs/FreeEData.o .libs/FreeEventData.o .libs/FreeGC.o .libs/FreePix.o .libs/FSSaver.o .libs/FSWrap.o .libs/GCMisc.o .libs/Geom.o .libs/GetAtomNm.o .libs/GetColor.o .libs/GetDflt.o .libs/GetEventData.o .libs/GetFPath.o .libs/GetFProp.o .libs/GetGCVals.o .libs/GetGeom.o .libs/GetHColor.o .libs/GetHints.o .libs/GetIFocus.o .libs/GetImage.o .libs/GetKCnt.o .libs/GetMoEv.o .libs/GetNrmHint.o .libs/GetPCnt.o .libs/GetPntMap.o .libs/GetProp.o .libs/GetRGBCMap.o .libs/GetSOwner.o .libs/GetSSaver.o .libs/GetStCmap.o .libs/GetTxtProp.o .libs/GetWAttrs.o .libs/GetWMCMapW.o .libs/GetWMProto.o .libs/globals.o .libs/GrButton.o .libs/GrKeybd.o .libs/GrKey.o .libs/GrPointer.o .libs/GrServer.o .libs/Host.o .libs/Iconify.o .libs/IfEvent.o .libs/imConv.o .libs/ImText16.o .libs/ImText.o .libs/ImUtil.o .libs/InitExt.o .libs/InsCmap.o .libs/IntAtom.o .libs/KeyBind.o .libs/KeysymStr.o .libs/KillCl.o .libs/LiHosts.o .libs/LiICmaps.o .libs/LiProps.o .libs/ListExt.o .libs/LoadFont.o .libs/LockDis.o .libs/locking.o .libs/LookupCol.o .libs/LowerWin.o .libs/Macros.o .libs/MapRaised.o .libs/MapSubs.o .libs/MapWindow.o .libs/MaskEvent.o .libs/Misc.o .libs/ModMap.o .libs/MoveWin.o .libs/NextEvent.o .libs/OCWrap.o .libs/OMWrap.o .libs/OpenDis.o .libs/ParseCmd.o .libs/ParseCol.o .libs/ParseGeom.o .libs/PeekEvent.o .libs/PeekIfEv.o .libs/Pending.o .libs/PixFormats.o .libs/PmapBgnd.o .libs/PmapBord.o .libs/PolyReg.o .libs/PolyTxt16.o .libs/PolyTxt.o .libs/PropAlloc.o .libs/PutBEvent.o .libs/PutImage.o .libs/Quarks.o .libs/QuBest.o .libs/QuColor.o .libs/QuColors.o .libs/QuCurShp.o .libs/QuExt.o .libs/QuKeybd.o .libs/QuPntr.o .libs/QuStipShp.o .libs/QuTextE16.o .libs/QuTextExt.o .libs/QuTileShp.o .libs/QuTree.o .libs/RaiseWin.o .libs/RdBitF.o .libs/RecolorC.o .libs/ReconfWin.o .libs/ReconfWM.o .libs/Region.o .libs/RegstFlt.o .libs/RepWindow.o .libs/RestackWs.o .libs/RotProp.o .libs/ScrResStr.o .libs/SelInput.o .libs/SendEvent.o .libs/SetBack.o .libs/SetClMask.o .libs/SetClOrig.o .libs/SetCRects.o .libs/SetDashes.o .libs/SetFont.o .libs/SetFore.o .libs/SetFPath.o .libs/SetFunc.o .libs/SetHints.o .libs/SetIFocus.o .libs/SetLocale.o .libs/SetLStyle.o .libs/SetNrmHint.o .libs/SetPMask.o .libs/SetPntMap.o .libs/SetRGBCMap.o .libs/SetSOwner.o .libs/SetSSaver.o .libs/SetState.o .libs/SetStCmap.o .libs/SetStip.o .libs/SetTile.o .libs/SetTSOrig.o .libs/SetTxtProp.o .libs/SetWMCMapW.o .libs/SetWMProto.o .libs/StBytes.o .libs/StColor.o .libs/StColors.o .libs/StName.o .libs/StNColor.o .libs/StrKeysym.o .libs/StrToText.o .libs/Sync.o .libs/Synchro.o .libs/Text16.o .libs/Text.o .libs/TextExt16.o .libs/TextExt.o .libs/TextToStr.o .libs/TrCoords.o .libs/UndefCurs.o .libs/UngrabBut.o .libs/UngrabKbd.o .libs/UngrabKey.o .libs/UngrabPtr.o .libs/UngrabSvr.o .libs/UninsCmap.o .libs/UnldFont.o .libs/UnmapSubs.o .libs/UnmapWin.o .libs/VisUtil.o .libs/WarpPtr.o .libs/Window.o .libs/WinEvent.o .libs/Withdraw.o .libs/WMGeom.o .libs/WMProps.o .libs/WrBitF.o .libs/XlibAsync.o .libs/XlibInt.o .libs/Xrm.o .libs/x11_trans.o -Wl,--whole-archive xlibi18n/.libs/libi18n.a xcms/.libs/libxcms.a xkb/.libs/libxkb.a -Wl,--no-whole-archive -lXdmcp -L../../../nxcomp/src/.libs -L/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64 -L/usr/lib64 -lXcomp -lpthread -ljpeg -lpng16 -lz -ldl -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -O2 -g -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -Wl,-z -Wl,relro -pthread -Wl,-soname -Wl,libNX_X11.so.6 -o .libs/libNX_X11.so.6.3.0
libtool: install: /usr/bin/install -c .libs/libNX_X11.so.6.3.0T /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.so.6.3.0
libtool: install: (cd /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64 && { ln -s -f libNX_X11.so.6.3.0 libNX_X11.so.6 || { rm -f libNX_X11.so.6 && ln -s libNX_X11.so.6.3.0 libNX_X11.so.6; }; })
libtool: install: (cd /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64 && { ln -s -f libNX_X11.so.6.3.0 libNX_X11.so || { rm -f libNX_X11.so && ln -s libNX_X11.so.6.3.0 libNX_X11.so; }; })
libtool: install: /usr/bin/install -c .libs/libNX_X11.lai /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.la
libtool: install: /usr/bin/install -c .libs/libNX_X11.a /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.a
libtool: install: chmod 644 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.a
libtool: install: ranlib /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.a
libtool: warning: remember to run 'libtool --finish /usr/lib64'
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/X11'
/usr/bin/install -c -m 644 XErrorDB '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/X11'
make[6]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
make[5]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib/src'
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/pkgconfig'
/usr/bin/install -c -m 644 nx-x11.pc '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/pkgconfig'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
make[2]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nx-X11/lib'
# install the nxdialog executable and its man page
make -C nxdialog install
make[2]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
Making install in bin
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/bin'
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/bin'
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/bin'
/usr/bin/install -c nxdialog '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/bin'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/bin'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/bin'
Making install in man
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/man'
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/man'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/man/man1'
/usr/bin/install -c -m 644 nxdialog.1 '/builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/man/man1'
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/man'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog/man'
make[3]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
make[4]: Entering directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
make[3]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
make[2]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26/nxdialog'
make[1]: Leaving directory '/builddir/build/BUILD/nx-libs-3.5.99.26'
+ ln -s ../X11/fonts /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/share/nx/fonts
+ rm -f /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.a /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcomp.a /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcompshad.a
+ chmod 755 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.so /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.so.6 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.so.6.3.0 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcomp.so /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcomp.so.3 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcomp.so.3.5.99 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcompshad.so /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcompshad.so.3 /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcompshad.so.3.5.99
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/GL
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKB.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKBconfig.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKBgeom.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKBproto.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKBsrv.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKBstr.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKM.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XKMformat.h
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/Xv.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XvMC.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XvMCproto.h /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/Xvproto.h
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XResproto.h
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XIproto.h
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/extensions/XI.h
+ rm -r /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/include/nx-X11/Xtrans
+ rm /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libNX_X11.la /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcomp.la /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/lib64/libXcompshad.la
+ pathfix.py -pni '%{__python3} %{py3_shbang_opts}' /builddir/build/BUILDROOT/nx-libs-3.5.99.26-0.0build1.0.git20230223.4572.81.heuler.fc26.x86_64/usr/bin/nxdialog
/var/tmp/rpm-tmp.dIrku0: line 66: pathfix.py: command not found
error: Bad exit status from /var/tmp/rpm-tmp.dIrku0 (%install)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.dIrku0 (%install)
Child return code was: 1
EXCEPTION: [Error()]
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/mockbuild/trace_decorator.py", line 89, in trace
result = func(*args, **kw)
File "/usr/lib/python3/dist-packages/mockbuild/util.py", line 568, in do
raise exception.Error("Command failed. See logs for output.\n # %s" % (command,), child.returncode)
mockbuild.exception.Error: Command failed. See logs for output.
# bash --login -c /usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/nx-libs.spec
+ exit 1
+ cleanup
+ '[' -n /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88 ']'
+ '[' -e /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88 ']'
+ case "${TMP_MOCK_CFG_DIR}" in
+ typeset file=
+ for file in "${TMP_MOCK_CFG_DIR}/"*
+ '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88/fedora-26-x86_64-x2go-nightly-full.8cohD1hvaQ9yOoZXjFM9GaID.cfg ']'
+ rm -- /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88/fedora-26-x86_64-x2go-nightly-full.8cohD1hvaQ9yOoZXjFM9GaID.cfg
+ for file in "${TMP_MOCK_CFG_DIR}/"*
+ '[' '!' -f /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88/fedora-26-x86_64-x2go-nightly-full.ymN6r17S8fTUUyY1MOFeaD6Q.cfg ']'
+ rm -- /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88/fedora-26-x86_64-x2go-nightly-full.ymN6r17S8fTUUyY1MOFeaD6Q.cfg
+ '[' -e /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88 ']'
+ '[' -d /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88 ']'
+ rmdir -- /var/lib/jenkins/tmp/x2go-mock-foSfBLODoQpNjWmAg6ZIWa88
+ typeset temp_dir=
+ for temp_dir in "${temp_cleanup[@]}"
+ '[' -n /var/lib/jenkins/tmp/tmp.QusTmYcjLCn7TLUtVnfeQXjT ']'
+ '[' -d /var/lib/jenkins/tmp/tmp.QusTmYcjLCn7TLUtVnfeQXjT ']'
+ rm -Rf -- /var/lib/jenkins/tmp/tmp.QusTmYcjLCn7TLUtVnfeQXjT
Build step 'Execute shell' marked build as failure
More information about the x2go-commits
mailing list