[X2Go-Commits] Build failed in Jenkins: nx-libs+ppc64be+nightly+debian-jessie #77

jenkins at x2go.org jenkins at x2go.org
Wed Nov 13 12:23:09 CET 2019


See <https://jenkins.x2go.org:8443/job/nx-libs+ppc64be+nightly+debian-jessie/77/display/redirect>

Changes:

------------------------------------------
[...truncated 1.68 MB...]
     840 bytes,    19 lines      control              
     312 bytes,     4 lines      md5sums              
      29 bytes,     1 lines      shlibs               
      26 bytes,     1 lines      triggers             
 Package: libxcompshad3
 Source: nx-libs
 Version: 2:3.5.99.22-0~git20191113.3526+8.heuler.1
 Architecture: powerpc
 Maintainer: Artica Project <devs at lists.arctica-project.org>
 Installed-Size: 385
 Depends: libnx-x11-6 (= 2:3.5.99.22-0~git20191113.3526+8.heuler.1), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), libx11-6, libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxrandr2, libxtst6
 Breaks: nxcompshad (<= 3.5.1)
 Replaces: nxcompshad
 Section: heuler/libs
 Priority: optional
 Multi-Arch: same
 Homepage: https://github.com/ArcticaProject/nx-libs/
 Description: NX shadowing library
  NX is a software suite which implements very efficient
  compression of the X11 protocol. This increases performance when
  using X applications over a network, especially a slow one.
  .
  This package provides a library for shadow session support.

drwxr-xr-x root/root         0 2019-11-13 12:21 ./
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/
lrwxrwxrwx root/root         0 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/libXcompshad.so.3 -> libXcompshad.so.3.5.99
-rw-r--r-- root/root     50804 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/libXcompshad.so.3.5.99
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/libxcompshad3/
-rw-r--r-- root/root     20624 2019-11-13 12:04 ./usr/share/doc/libxcompshad3/changelog.Debian.gz
-rw-r--r-- root/root    133070 2019-11-13 12:04 ./usr/share/doc/libxcompshad3/changelog.gz
-rw-r--r-- root/root    156085 2019-11-13 12:04 ./usr/share/doc/libxcompshad3/copyright


libxcompshad-dev_3.5.99.22-0~git20191113.3526+8.heuler.1_powerpc.deb
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������

 new debian package, version 2.0.
 size 198718 bytes: control archive=934 bytes.
     819 bytes,    21 lines      control              
     473 bytes,     6 lines      md5sums              
 Package: libxcompshad-dev
 Source: nx-libs
 Version: 2:3.5.99.22-0~git20191113.3526+8.heuler.1
 Architecture: powerpc
 Maintainer: Artica Project <devs at lists.arctica-project.org>
 Installed-Size: 419
 Depends: libxcompshad3 (= 2:3.5.99.22-0~git20191113.3526+8.heuler.1)
 Breaks: nxcompshad-dev (<= 3.5.1)
 Replaces: nxcompshad-dev
 Provides: libxcompshad3-dev
 Section: heuler/libdevel
 Priority: optional
 Homepage: https://github.com/ArcticaProject/nx-libs/
 Description: NX shadowing library (development headers)
  NX is a software suite which implements very efficient
  compression of the X11 protocol. This increases performance when
  using X applications over a network, especially a slow one.
  .
  This package provides a library for shadow session support.
  .
  This package contains the development headers for this library.

drwxr-xr-x root/root         0 2019-11-13 12:21 ./
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/include/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/include/powerpc-linux-gnu/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/include/powerpc-linux-gnu/nx/
-rw-r--r-- root/root      4104 2019-11-13 12:21 ./usr/include/powerpc-linux-gnu/nx/Shadow.h
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/
-rw-r--r-- root/root     65456 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/libXcompshad.a
lrwxrwxrwx root/root         0 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/libXcompshad.so -> libXcompshad.so.3.5.99
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/pkgconfig/
-rw-r--r-- root/root       304 2019-11-13 12:21 ./usr/lib/powerpc-linux-gnu/pkgconfig/nxcompshad.pc
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/libxcompshad-dev/
-rw-r--r-- root/root     20624 2019-11-13 12:04 ./usr/share/doc/libxcompshad-dev/changelog.Debian.gz
-rw-r--r-- root/root    133070 2019-11-13 12:04 ./usr/share/doc/libxcompshad-dev/changelog.gz
-rw-r--r-- root/root    156085 2019-11-13 12:04 ./usr/share/doc/libxcompshad-dev/copyright
lrwxrwxrwx root/root         0 2019-11-13 12:21 ./usr/share/doc/libxcompshad3-dev -> libxcompshad3


libxcompshad3-dbg_3.5.99.22-0~git20191113.3526+8.heuler.1_powerpc.deb
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������

 new debian package, version 2.0.
 size 252272 bytes: control archive=872 bytes.
     773 bytes,    20 lines      control              
     347 bytes,     4 lines      md5sums              
 Package: libxcompshad3-dbg
 Source: nx-libs
 Version: 2:3.5.99.22-0~git20191113.3526+8.heuler.1
 Architecture: powerpc
 Maintainer: Artica Project <devs at lists.arctica-project.org>
 Installed-Size: 430
 Depends: libxcompshad3 (= 2:3.5.99.22-0~git20191113.3526+8.heuler.1)
 Breaks: nx-x11-dbg (<< 2:3.5.0.29-1~)
 Section: heuler/debug
 Priority: optional
 Multi-Arch: same
 Homepage: https://github.com/ArcticaProject/nx-libs/
 Description: nx-X11 shadowing library (debug package)
  NX is a software suite which implements very efficient
  compression of the X11 protocol. This increases performance when
  using X applications over a network, especially a slow one.
  .
  This package provides a library for shadow session support.
  .
  This package contains debug symbols for this library.

drwxr-xr-x root/root         0 2019-11-13 12:21 ./
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/debug/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/lib/debug/.build-id/e0/
-rw-r--r-- root/root     89024 2019-11-13 12:21 ./usr/lib/debug/.build-id/e0/63450a78ce08eed87f0d3a556fde18deef7a19.debug
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-11-13 12:21 ./usr/share/doc/libxcompshad3-dbg/
-rw-r--r-- root/root     20624 2019-11-13 12:04 ./usr/share/doc/libxcompshad3-dbg/changelog.Debian.gz
-rw-r--r-- root/root    133070 2019-11-13 12:04 ./usr/share/doc/libxcompshad3-dbg/changelog.gz
-rw-r--r-- root/root    156085 2019-11-13 12:04 ./usr/share/doc/libxcompshad3-dbg/copyright


������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��� Post Build                                                                   ���
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������


������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��� Cleanup                                                                      ���
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������

Purging /��BUILDDIR��
Not cleaning session: cloned chroot in use

������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��� Summary                                                                      ���
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������

Build Architecture: powerpc
Build-Space: 547964
Build-Time: 730
Distribution: jessie
Host Architecture: powerpc
Install-Time: 284
Job: /home/x2go-jenkins/tmp/tmp.Z344ONeuY28948zfVautXYux/nx-libs_3.5.99.22-0~git20191113.3526+8.heuler.1.dsc
Machine Architecture: powerpc
Package: nx-libs
Package-Time: 1048
Source-Version: 2:3.5.99.22-0~git20191113.3526+8.heuler.1
Space: 547964
Status: successful
Version: 2:3.5.99.22-0~git20191113.3526+8.heuler.1
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
Finished at 20191113-1222
Build needed 00:17:28, 547964k disc space
Signature with key 'F4A7678C9C6B0B2B' requested:
 signfile /home/x2go-jenkins/pkg-dist/heuler/nx-libs/debian/jessie/powerpc/nx-libs_3.5.99.22-0~git20191113.3526+8.heuler.1_powerpc.changes F4A7678C9C6B0B2B

Successfully signed changes file
+ base_arch=
+ '[' -n '' ']'
+ return 0
+ unlock_workspace /home/x2go-jenkins/build/heuler/nx-libs/../.nx-libs.lock
+ typeset lock_file=/home/x2go-jenkins/build/heuler/nx-libs/../.nx-libs.lock
+ rm -f -- /home/x2go-jenkins/build/heuler/nx-libs/../.nx-libs.lock
++ basename ./x2go-sbuild+upload-deb-package
+ '[' xx2go-sbuild+upload-deb-package = xx2go-upload-deb-package ']'
++ basename ./x2go-sbuild+upload-deb-package
+ '[' xx2go-sbuild+upload-deb-package = xx2go-sbuild+upload-deb-package ']'
+ upload_packages
+ typeset -a deb_build_for_arr
+ typeset 'OLDIFS= 	
'
+ IFS=' '
+ read -a deb_build_for_arr
+ IFS=' 	
'
+ typeset line=
+ for line in '"${deb_build_for_arr[@]}"'
++ cut -d: -f1
++ tr '[:upper:]' '[:lower:]'
+ l_DIST=debian
+ l_CODENAMES=jessie
+ for l_CODENAME in '${l_CODENAMES}'
+ test -z jessie
+ grep jessie
debian:jessie
+ typeset numerical_version=
+ typeset pretty_dist=
+ typeset -i tmp_ret=1
++ map_codename_to_numerical_version debian jessie
++ typeset dist=debian
++ typeset codename_in=jessie
++ '[' -n 4 ']'
++ '[' 4 -gt 3 ']'
++ typeset -l codename=jessie
++ '[' jessie = sid ']'
++ typeset numerical_version=
++ typeset -i ret=1
++ '[' debian = debian ']'
+++ debian-codename-to-version.sh jessie
++ numerical_version=8
++ ret=0
++ echo 8
++ return 0
+ numerical_version=8
+ tmp_ret=0
+ '[' -n debian ']'
+ '[' debian = debian ']'
+ pretty_dist=Debian
+ '[' -n debian ']'
+ '[' debian = ubuntu ']'
+ '[' 0 -ne 0 ']'
+ '[' -z 8 ']'
+ typeset -a arches
+ arches=()
+ case "${PLATFORM}" in
+ [[ 8 -le 8 ]]
+ arches+=("powerpc")
+ [[ 8 -gt 10 ]]
+ '[' debian = raspbian ']'
+ for l_ARCH in '"${arches[@]}"'
+ '[' x '!=' xpowerpc ']'
+ cd /home/x2go-jenkins/pkg-dist/heuler/nx-libs/debian/jessie/powerpc
+ test -f ./dupload.conf
+ ln -s -- /home/x2go-jenkins/.dupload.conf.x2go ./dupload.conf
+ ls -- nx-libs_3.5.99.22-0~git20191113.3526+8.heuler.1_powerpc.changes
+ dupload -c --to x2go-debian-jessie nx-libs_3.5.99.22-0~git20191113.3526+8.heuler.1_powerpc.changes
hostname: Name or service not known
dupload fatal error: Who am I? (can't get hostname)
 at /usr/bin/dupload line 88
+ cleanup
+ typeset temp_dir=
+ for temp_dir in '"${temp_cleanup[@]}"'
+ '[' -n '' ']'
+ for temp_dir in '"${temp_cleanup[@]}"'
+ '[' -n /home/x2go-jenkins/tmp/tmp.Z344ONeuY28948zfVautXYux ']'
+ '[' -d /home/x2go-jenkins/tmp/tmp.Z344ONeuY28948zfVautXYux ']'
+ rm -Rf -- /home/x2go-jenkins/tmp/tmp.Z344ONeuY28948zfVautXYux
Build step 'Execute shell' marked build as failure


More information about the x2go-commits mailing list