[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

[wiki-admin at x2go.org]

A page in your DokuWiki was added or changed. Here are the details:

Date        : 2017/01/02 17:30
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483378101
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?] 
User        : stefanbaur

@@ -442,9 +442,10 @@
  </note>
  
  ==== What options are available under FURTHER-OPTIONS-GO-HERE? ====
    * Where it says FURTHER-OPTIONS-GO-HERE, you can (must!) add one or more of the options explained below. All options are separated from the next option using a single blank (space bar), just like the options before that placeholder. **DO NOT** use newlines. All "APPEND" options must be on **one and the same** line.
-   * Options containing
"tftp|rsync|https|http|ftp://your-http-server-ip-here" should be replaced with the proper HTTP, HTTPS, FTP, or, where mentioned as an alternative, TFTP or rsync URL for your server. HTTPS is always preferred for security reasons.
+   * Options containing "tftp|rsync|https|http|ftp://your-http-server-ip-here" should be replaced with the proper HTTP, HTTPS, FTP, or, where mentioned as an alternative, TFTP or rsync URL for your server. HTTPS is always preferred for security reasons. Be sure to use only the IP, not a DNS name.
+   * Options containing "tftp|rsync|https|http|ftp://your-http-server-ip-or-dns-here" should be replaced with the proper HTTP, HTTPS, FTP, or, where mentioned as an alternative, TFTP or rsync URL for your server. HTTPS is always preferred for security reasons. IP or DNS name may be used.
  
  === These two are mutually exclusive, i.e. never put both of them in the same config ===
    *
''sessionsurl=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce.sessions'' - use this to specify a sessions file. You need this unless you are using a session broker. See below for how to add this file to your HTTP, HTTPS, or FTP server.  Note that whoever manages to spoof the server name can inject rogue session config files into your ThinClients.  To mitigate this risk, use HTTPS, where the attacker would have to spoof both server name and matching certificate.
    * ''broker-url=ssh:<nowiki>//</nowiki>your-broker-address-here'' - this allows you to specify an X2Go Session Broker instead of a sessions file (not limited to an ssh-based broker, works with an http-based broker as well)


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/