[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce
wiki-admin at x2go.org
wiki-admin at x2go.org
Mon Jan 2 13:32:38 CET 2017
A page in your DokuWiki was added or changed. Here are the details:
Date : 2017/01/02 12:32
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483359910
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary:
User : stefanbaur
@@ -246,9 +246,9 @@
* ''tcpprintonlyfrom=x.x.x.x'' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. This should be the IP of your CUPS server or whatever print server system you use. Understands the same syntax as xinetd's ''only_from''.
These are //not yet implemented//, but planned for a future release, and only intended to be used with TCE images stored on local media:
*
''updateurl=rsync|https|http|ftp://your-http-server-ip-or-dns-here/path-to-update-files'' - Will allow you to update an image in the background when using local storage instead of PXE. Download task will start at a randomized interval to avoid unintentional dDOSing of the update server/network infrastructure. The updater will even work when using NTFS for local storage, but only if the //toram// boot option is used. Regardless of NTFS or not, the updater requires three directories: ''/boot/live1, /boot/live2, /boot/live-download'' **Attention:** Whoever manages to spoof the server name can deploy rogue images to your ThinClients. Even though it is slower, using an HTTPS web server is the safer way of doing this. Be sure that your web server delivers a last-modified header for all files.
- * ''updatesleep=nnnnn'' - Will allow you to specify the upper limit (in seconds) of the update timer's randomizer. Allowed range: 121-32767. Will default to 900 if unset or set to an
out-of-range value.
+ * ''updatesleep=nnnnn'' - Will allow you to specify the upper limit (in seconds) of the update timer's randomizer. Allowed range for upper limit: 240-32767. Will default to 900 if unset or set to an out-of-range value. Lower limit is fixed at 120 seconds.
* ''bwlimit=nnn'' - Will allow you to specify a bandwidth limit (valid values: 1-100) in percent for the backgrounded update task.
* ''ntfs-uuid='' - Will be required for updating images stored on NTFS filesystems. Full UUID as shown under /dev/disk/by-uuid/ is preferred, but can work with the volume serial number shown in the output of "vol c:" as well.
=== Required unless using the X2Go Session Broker: Adding the x2go-tce.sessions session configuration file to your HTTP or FTP Server ===
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
More information about the x2go-commits
mailing list