[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

[wiki-admin at x2go.org]

A page in your DokuWiki was added or changed. Here are the details:

Date        : 2017/01/01 19:50
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483298372
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Setting up your own netbootable X2Go-TCE environment] 
User        : stefanbaur

@@ -236,9 +236,9 @@
    * ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication 
  
  These are //not yet implemented//, but planned for a future release:
    * ''blank=n|n:n:n'' - Will disable (''blank=0'') or set screensaver timeout. Use ''blank=n:n:n'' to set DPMS Standby/Suspend/Off values. Standby value equals screensaver timeout value.
-   * ''nodpms'' - Will not touch DPMS settings
at all (by default, ''blank=0'' does both ''xset s 0'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings.
+   * ''nodpms'' - Will not touch DPMS settings at all (by default, ''blank=0'' does both ''xset s off'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings.
    * ''tcpprint'' - Will allow you to use local LPT/USB printers like "dumb" network printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random devices. This setup is preferred over the X2GoClient's built-in printing for locally attached printers if X2GoServer and ThinClients are on the same Network. It is not recommended when your X2Go connection goes across the internet or when the ThinClient is actually a Laptop roaming between different
networks.
    * ''tcpprintonlyfrom='' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer.
  
  These are //not yet implemented//, but planned for a future release, and only intended to be used with TCE images stored on local media:


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/