[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:x2gobroker

wiki-admin at x2go.org wiki-admin at x2go.org
Fri Feb 10 17:53:08 CET 2017


A page in your DokuWiki was added or changed. Here are the details:

Date        : 2017/02/10 16:53
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:x2gobroker?rev=1486745510
New Revision: http://wiki.x2go.org/doku.php/doc:howto:x2gobroker
Edit Summary: added x2goclient.xgo.example.com
User        : stefanbaur

@@ -1559,5 +1559,217 @@
  nslcd   nslcd/ldap-base string  dc=x2go,dc=example,dc=com
  nslcd   nslcd/ldap-sasl-realm   string
  nslcd   nslcd/ldap-reqcert      select
  nslcd   nslcd/ldap-starttls     boolean false
+ </file>
+ 
+ ==== x2goclient1.xgo.example.com ====
+ <file - preseed_x2goclient1>
+ # There are two sets of parameters you can use as the append line:
+ # The minimum required is:
+ # hostname=x2goclient1 domain=x2go.example.com
+ # url=http://192.168.0.224/preseed_x2goclient1
+
# (all in one line, and without the leading "#" marks)
+ # If you only use these, you will have to answer a few questions
+ # - mainly regarding country, keyboard and locale - interactively.
+ # For a fully automated installation, add these parameters 
+ # *in addition to the ones listed above*
+ # (again, all in one line, and without the leading "#" marks):
+ # priority=critical netcfg/use_dhcp=true netcfg/choose_interface=eth0 
+ # debian-installer/locale=de_DE keymap=de-latin1
+ # debian-installer/locale=de_DE.UTF-8 DEBCONF_DEBUG=5
+ 
+ # We prefer to stay anonymous ;-)
+ popularity-contest popularity-contest/participate boolean false
+ 
+ # Load non-free firmware, if possible
+ d-i hw-detect/load_firmware boolean true
+ 
+ # Repository
+ # CHANGE THIS to your nearest mirror
+ d-i     mirror/http/hostname    string ftp.de.debian.org
+ d-i     mirror/http/directory   string /debian/
+ d-i     mirror/suite            string jessie
+ 
+ # Post install APT setup
+ d-i    
apt-setup/uri_type      select d-i
+ # CHANGE THIS to your nearest mirror
+ d-i     apt-setup/hostname      string ftp.de.debian.org
+ d-i     apt-setup/directory     string /debian/
+ d-i     apt-setup/another       boolean false
+ d-i     apt-setup/security-updates      boolean true
+ d-i     finish-install/reboot_in_progress note
+ d-i     prebaseconfig/reboot_in_progress        note
+ 
+ d-i     apt-setup/non-free 	boolean true
+ d-i     apt-setup/contrib 	boolean true
+ 
+ # Network-related settings
+ # Every hostname and domain name assigned via DHCP  
+ # takes priority over these values 
+ # however, if they are left empty, the installer will query them interactively 
+ d-i     netcfg/get_hostname     string  x2goclient1
+ d-i     netcfg/get_domain       string  x2go.example.com
+ d-i     netcfg/disable_dhcp     boolean false
+ d-i     mirror/http/proxy      string
+ d-i     netcfg/choose_interface select eth0
+ d-i     netcfg/wireless_wep     string
+ 
+ # Partitioning and
Bootloader settings
+ d-i     partman-auto/disk               string /dev/sda
+ d-i     partman-auto/method             string regular
+ 
+ # Do not use UUIDs in fstab (and not in bootloader config, either)
+ d-i partman/mount_style string traditional
+ 
+ # This silences an interactive "are you sure?" query
+ d-i	partman/confirm	boolean	true
+ d-i     partman-partitioning/confirm_write_new_label boolean true
+ d-i     partman/choose_partition select finish
+ d-i     partman/confirm_nooverwrite boolean true
+ d-i     partman-lvm/device_remove_lvm boolean true
+ d-i     partman-lvm/confirm boolean true
+ d-i     partman-md/device_remove_md boolean true
+ d-i     partman-md/confirm boolean true
+ 
+ d-i partman-auto/choose_recipe select atomic
+ #d-i partman-auto/choose_recipe select home
+ #d-i partman-auto/choose_recipe select multi
+ 
+ d-i debian-installer/add-kernel-opts string nomodeset gfxpayload=vga=normal
+ 
+ d-i grub-installer/only_debian boolean true
+ d-i
grub-installer/with_other_os boolean true
+ d-i grub-installer/bootdev  string /dev/sda
+ 
+ # Country, keyboard, locale settings - CHANGE THIS
+ d-i 	debian-installer/locale string de_DE
+ d-i     debian-installer/keymap select de-latin1
+ d-i     debian-installer/keymap string de-latin1
+ 
+ d-i     languagechooser/language-name-fb    select German
+ d-i     countrychooser/country-name select Germany
+ d-i     console-setup/layoutcode string de_DE
+ d-i     debian-installer/locale             select de_DE.UTF-8
+ 
+ # Time zone settings - CHANGE THIS
+ d-i     tzconfig/gmt            boolean false
+ d-i     tzconfig/choose_country_zone/Europe select Berlin
+ d-i     tzconfig/choose_country_zone_single boolean true
+ d-i	time/zone	select	Europe/Berlin
+ d-i	clock-setup/utc	boolean	true
+ d-i	mirror/country	string	manual
+ d-i     clock-setup/ntp boolean false
+ 
+ # Root Account
+ # this says "start" in MD5 - CHANGE THIS
+ d-i	passwd/root-password-crypted    passwd   
$1$ekONVtC5$rTbjMaMA6cqFpbWu7UXWN.
+ 
+ # On this client system, we want to create a local user
+ d-i passwd/make-user boolean true
+ d-i	passwd/user-fullname            string Local User
+ d-i	passwd/username                 string localuser
+ d-i	passwd/user-password-crypted    passwd $1$ekONVtC5$rTbjMaMA6cqFpbWu7UXWN.
+ 
+ 
+ # Additional repositories, local[0-9] available
+ # this is where we add the X2Go repo
+ d-i apt-setup/local0/repository string \
+        http://packages.x2go.org/debian jessie main
+ d-i apt-setup/local0/comment string X2Go Repository
+ 
+ # URL to the public key of the local repository; you must provide a key or
+ # apt will complain about the unauthenticated repository and so the
+ # sources.list line will be left commented out
+ 
+ # CHANGE THIS - you need to download this keyfile onto your web server
+ # run these gpg commands to download it:
+ # gpg --keyserver keys.gnupg.net --recv-keys E1F958385BFE2B6E
+ # gpg -a --export E1F958385BFE2B6E >
x2go.key.gpg
+ #d-i apt-setup/local0/key string http://192.168.0.224/x2go.key.gpg
+ #d-i apt-setup/local0/key string http://packages.x2go.org/pub.key
+ d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key
+ 
+ # Task and Package Selection
+ tasksel	tasksel/first	multiselect	ssh-server
+ d-i	pkgsel/include	string		ssh \
+ console-setup \
+ debconf-i18n \
+ lightdm \
+ lxde-core \
+ lxtask \
+ lxlauncher \
+ mc \
+ ntp \
+ screen \
+ sysvinit-core \
+ sysvinit-utils \
+ unattended-upgrades \
+ vim \
+ x2goclient
+ 
+ # Commands to be executed after package installation
+ # Note: The only way to insert comments below is to add an "echo COMMENT"
+ d-i preseed/late_command string echo "COMMENT: Begin Post-Install Setup/Config" ;\
+  echo "COMMENT: Configure SSH" ;\
+  mkdir -p /target/root/.ssh ; \
+  chmod 700 /target/root/.ssh ;\
+  touch /target/root/.ssh/authorized_keys ; \
+  chmod 600 /target/root/.ssh/authorized_keys ;\
+  sed -i '/^PermitRootLogin/c
PermitRootLogin without-password' /target/etc/ssh/sshd_config ;\
+  echo -n 'ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA0d0QRUMzhozXPzFe79t+/xcdmNPe2rf5LirW5IzOuFrJlY8WaZCOWLJXrpn724TNRLf+v+88lOsXlrQLBom4FjOpgCpDvxZzQIG7tcURZbUO1nAdKsDdZ6Nt0e91h1UuDpya6E74VMuB9krG1FjJRABMfMDhKweMUUkkq4yQ34jqUZhJv97' >>/target/root/.ssh/authorized_keys ;\
+  echo -n '+sRzkh5DJ/pZlpCaa3pXT3MI5RCR7elC59hzueqlOjvrIAjYo4KRz3j3OUPNa3NnT0tM1QNdy/3dF6yJhobmd5GspMRDV0TSBGBG+Jg1Tbg/gpEHf/0NyUCoS2o1Tonfgbf/dHwIZuWX17seAQsDw/yR+7YkU2CKHOQ== Wartungszugang Stefan Baur' >>/target/root/.ssh/authorized_keys ;\
+  echo "COMMENT: Fixing shortcomings of netcfg here..." ;\
+  sed -i "s/$(cat /etc/hostname)/x2goclient1/" /target/etc/hosts ;\
+  echo "x2goclient1" >/target/etc/hostname ;\
+  echo "COMMENT: Fix ends here." ;\
+  echo "COMMENT: This fixes some annoyances regarding UTF-8 and MidnightCommander" ;\
+  echo "export LANG=de_DE.UTF-8" >>/target/etc/bash.bashrc ;\
+  echo "export NCURSES_NO_UTF8_ACS=1"
>>/target/etc/bash.bashrc ;\
+  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
+  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
+  echo "COMMENT: This is so dnsmasq on ldap1 is queried for DNS first" ;\
+  sed 's/#prepend domain-name-servers 127.0.0.1;/prepend domain-name-servers 192.168.154.146;/' -i /target/etc/dhcp/dhclient.conf ;\
+  echo "COMMENT: This removes the cdrom entry from sources list (left behind by installer)" ;\
+  sed -i '/^#* *deb cdrom/d' /target/etc/apt/sources.list ;\
+  echo "COMMENT: This patches rc.local so the following set of commands is run" ;\
+  echo "COMMENT: exactly *once* - at the first boot after installation." ;\
+  echo "COMMENT: First, remove the 'exit 0'" ;\
+  sed -i '/^exit 0/d' /target/etc/rc.local ;\
+  echo "COMMENT: This is so /bin/sh points to /bin/bash instead of /bin/dash" ;\
+  echo "COMMENT: As the standard shell of our users is set to /bin/sh." ;\
+  echo 'dpkg-reconfigure
-pcritical dash' >>/target/etc/rc.local ;\
+  echo "COMMENT: This is the cleanup job for the dpkg-reconfigure call, so it doesn't run more than once." ;\
+  echo 'sed -i -e "/dpkg/d" /etc/rc.local' >>/target/etc/rc.local ;\
+  echo "COMMENT: Finally, rc.local must terminate with 'exit 0' again." ;\
+  echo 'exit 0' >>/target/etc/rc.local ;\
+  echo "COMMENT: Finally, take out the trash - sadly, systemd must stay because of MATE and LXDE." ;\
+  in-target apt-get autoremove --purge -y ;\
+  in-target apt-get clean ;\
+  echo "COMMENT: This last step creates an X2GoClient-in-Broker-Mode desktop entry" ;\
+  mkdir /target/home/localuser/Desktop ;\
+  echo '[Desktop Entry]' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Version=1.0' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Terminal=false' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Icon=x2goclient' >>/target/home/localuser/Desktop/x2goclient-broker.desktop
;\
+  echo 'Type=Application' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Categories=Internet' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Exec=x2goclient --broker-url=ssh://x2gobroker1.x2go.example.com:/usr/bin/x2gobroker --add-to-known-hosts' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Name=X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'GenericName=X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'Comment=Starts X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo 'StartupNotify=true' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\
+  echo "End Post-Install Setup/Config"
+ 
+ # Shut down and power off after installation
+ d-i debian-installer/exit/poweroff boolean true
+ 
+ # preseed key-value pairs for the packages we intend to install
+
dash	dash/sh	boolean	false
+ exim4-config exim4/no_config boolean true
+ mdadm   mdadm/autostart boolean false
+ mdadm   mdadm/mail_to   string  root
+ mdadm   mdadm/initrdstart       string  all
+ mdadm   mdadm/initrdstart_notinconf     boolean true
+ mdadm   mdadm/autocheck boolean true
+ mdadm   mdadm/start_daemon      boolean true
  </file>


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/



More information about the x2go-commits mailing list