[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

[wiki-admin at x2go.org]

A page in your DokuWiki was added or changed. Here are the details:

Date        : 2016/12/31 18:16
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483208014
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Prerequisites] 
User        : stefanbaur

@@ -145,8 +145,9 @@
    * You need an existing DHCP/PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg boot and configuration files, and a directory where kernel and initrd can be stored.  This is not covered here, though we might add a separate howto for that some time later on.
    * You will also need an HTTP/FTP server with a dedicated IP (no name-based virtual hosts) for the squashfs image.
      * This image cannot be deployed via TFTP as it is too large - some TFTP servers refuse to serve files lager than 32MB,
and some TFTP clients have problems with that as well.
      * Also, even if you have a TFTP server/client combination that handles files larger than 32 MB, it will still be waaaay slower than the HTTP/FTP transfer.
+     * Once your setup fulfills all the requirements listed above, go ahead and build the image using the scripts listed in [[doc:howto:tce#building_your_own_x2go-tce_image]] - make sure to choose <tt>export LBX2GO_IMAGETYPE='netboot'</tt> (this should be the default)
  
  ==== Setting up your own netbootable X2Go-TCE environment ====
  
  === Adding the X2Go-TCE files to your Boot and Web Server(s) ===


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/