[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

wiki-admin at x2go.org wiki-admin at x2go.org
Thu Dec 15 03:18:31 CET 2016


A page in your DokuWiki was added or changed. Here are the details:

Date        : 2016/12/15 02:18
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481768103
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Building your own netbootable X2Go-TCE image] 
User        : stefanbaur

@@ -124,20 +124,28 @@
  === Adding the files to your Boot and Web server ===
  
  This is assuming you already have a PXE/TFTP and HTTP or FTP setup.
  
- Once you see the message "Build is done:", go to the directory mentioned there, and copy
- x2go-tce-vmlinuz and x2go-tce-initrd.img to a suitable subdirectory under your TFTP root.
+ Once you see the message "Build is done:", go to the directory mentioned there, and copy x2go-tce-vmlinuz and x2go-tce-initrd.img to a suitable subdirectory
under your TFTP root.
  
  We suggest using ./x2go-tce.
- <note tip>To verify that both your installation in general and the newly copied files are reachable, use a TFTP client - we suggest atftp - and perform these steps:
+ 
+ <note tip>To verify that both your installation in general and the newly copied files are reachable via TFTP, use a TFTP client - we suggest atftp - and perform these steps:
  <code> cd $(mktemp -d)
   atftp your-tftp-server-ip-here
   tftp> get pxelinux.cfg/default
   tftp> get x2go-tce/x2go-tce-vmlinuz 
   tftp> get x2go-tce/x2go-tce-initrd.img 
   tftp> quit
  </code>
  </note>
- Copy x2go-tce-filesystem.squashfs from the directory mentioned after "Build is done:"  to a suitable subdirectory under your HTTP or FTP root.
+ 
+ Next, copy x2go-tce-filesystem.squashfs from the directory mentioned after "Build is done:"  to a suitable subdirectory under your HTTP or FTP root.
  
  We suggest using ./x2go-tce.
+ 
+ <note tip>To verify that both your installation
in general and the newly copied file are reachable via HTTP or FTP, use an HTTP/FTP client - we suggest wget - and perform these steps:
+ <code> cd $(mktemp -d)
+ wget -Y off http://your-http-server-ip-here/
+ wget -Y off http://your-http-server-ip-here/x2go-tce/x2go-tce-filesystem.squashfs
+ </code>
+ </note>


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/



More information about the x2go-commits mailing list