[X2Go-Commits] [[X2Go Wiki]] page changed: doc:howto:tce

[wiki-admin at x2go.org]

A page in your DokuWiki was added or changed. Here are the details:

Date        : 2016/12/14 19:20
Browser     : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0
IP-Address  : 78.43.90.159
Hostname    : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1481740604
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Prerequisites] 
User        : stefanbaur

@@ -13,4 +13,17 @@
  ==== Prerequisites ====
    * You need an existing PXE/TFTP setup with the usual pxelinux.0/pxelinux.cfg stuff. This is not covered here, though we might add a separate howto for that some time later on.
    * You need a Debian Jessie system to build the image. (Other distributions based on Debian might work, but this is untested.)
    * We suggest using a 64-Bit system, though it should be possible to use a 32-Bit system if you don't want to build a 64-Bit ThinClient image.
+   * Make sure your
package list is up to date by running: <code>sudo apt-get update </code>
+   * Install the required packages by running: <code>sudo apt-get install git-core live-build live-config-doc live-manual-html live-boot-doc</code>
+ 
+ ==== Building your own netbootable X2Go-TCE image ====
+ === Starting the build ===
+ Change to a directory where you want to save your builds, and run the following commands:<code>
+ DIR=./live-build-x2go-$(date +"%Y%m%d%H%M%S") # this will create a timestamped subdirectory
+ mkdir -p $DIR
+ cd $DIR
+ lb config ...
+ lb build
+ lb clean # optional command to clean up afterwards -> saves some space
+ </code>


-- 
This mail was generated by DokuWiki at
http://wiki.x2go.org/