[X2Go-Commits] Build failed in Jenkins: x2gognomebindings+nightly+sled-11.3 #2
jenkins at x2go.org
jenkins at x2go.org
Sun Feb 1 22:23:21 CET 2015
See <http://jenkins.x2go.org:8080/job/x2gognomebindings+nightly+sled-11.3/2/changes>
Changes:
[mike.gabriel] x2gognomebindings.spec: Always set BuildRoot: parameter.
[mike.gabriel] On SUSE, GConf2-devel is named gconf2-devel.
------------------------------------------
[...truncated 603 lines...]
[ 62s] [183/240] installing rpmlint-mini-1.0-214.39.1
[ 62s] [184/240] installing xorg-x11-libXv-devel-7.4-1.14
[ 62s] [185/240] installing xorg-x11-libXpm-devel-7.4-1.17
[ 62s] [186/240] installing pwdutils-3.2.15-0.13.1
[ 63s] [187/240] installing xorg-x11-libXmu-devel-7.4-1.17
[ 63s] [188/240] installing glib2-devel-2.22.5-0.8.8.1
[ 66s] [189/240] installing xorg-x11-libs-7.4-8.26.32.1
[ 67s] [190/240] installing rpmlint-Factory-1.0-44.21
[ 68s] [191/240] installing libgcrypt11-1.5.0-0.13.14
[ 69s] [192/240] installing dbus-1-1.2.10-3.27.1
[ 72s] [193/240] installing orbit2-devel-2.14.17-2.7.8
[ 72s] [194/240] installing cairo-1.8.8-2.1.48
[ 73s] [195/240] installing xorg-x11-libXprintUtil-devel-7.4-1.17
[ 73s] [196/240] installing dbus-1-devel-1.2.10-3.27.1
[ 73s] [197/240] installing libavahi-client3-0.6.23-11.30.4
[ 73s] [198/240] installing dbus-1-glib-0.76-34.22.1
[ 73s] [199/240] installing libxslt-1.1.24-19.21.1
[ 73s] [200/240] installing pango-1.26.2-1.3.1
[ 73s] [201/240] installing xorg-x11-devel-7.4-8.26.32.1
[ 74s] [202/240] installing cairo-devel-1.8.8-2.1.48
[ 74s] [203/240] installing dbus-1-glib-devel-0.76-34.22.1
[ 74s] [204/240] installing gtk-doc-1.11-3.6.48
[ 74s] [205/240] installing pango-devel-1.26.2-1.3.1
[ 74s] [206/240] installing gnome-desktop-lang-2.28.2-0.6.18
[ 74s] [207/240] installing gnome-doc-utils-lang-0.18.1-1.2.4
[ 74s] [208/240] installing perl-Module-Build-0.2808.01-0.67.52
[ 74s] [209/240] installing libtasn1-3-1.5-1.24.41
[ 75s] [210/240] installing libatk-1_0-0-1.28.0-1.4.1
[ 75s] [211/240] installing PolicyKit-0.9-14.41.1
[ 75s] [212/240] installing atk-1.28.0-1.4.1
[ 75s] [213/240] installing gnome-desktop-2.28.2-0.6.18
[ 75s] [214/240] installing libtasn1-1.5-1.24.41
[ 75s] [215/240] installing gnome-doc-utils-0.18.1-1.2.4
[ 75s] [216/240] installing perl-5.10.0-64.67.52
[ 77s] [217/240] installing ConsoleKit-0.2.10-64.65.1
[ 78s] [218/240] installing gtk2-2.18.9-0.23.1
[ 78s] [219/240] installing perl-Test-Simple-0.72-0.67.52
[ 78s] [220/240] installing perl-TimeDate-1.16-71.22
[ 79s] [221/240] installing atk-devel-1.28.0-1.4.1
[ 79s] [222/240] installing perl-XML-Parser-2.36-1.18
[ 79s] [223/240] installing libunique-1_0-0-1.1.2-1.1.279
[ 79s] [224/240] installing gconf2-2.28.0-1.6.10
[ 79s] Must specify some schema files to install
[ 79s] [225/240] installing gconf2-lang-2.28.0-1.6.10
[ 79s] [226/240] installing gconf2-devel-2.28.0-1.6.10
[ 79s] [227/240] installing intltool-0.40.5-2.6
[ 79s] [228/240] installing build-2011.10.10-0.7.10
[ 79s] [229/240] installing gnome-keyring-2.28.2-1.14.30
[ 89s] [230/240] installing libgnome-desktop-2-11-2.28.2-0.6.18
[ 89s] [231/240] installing gtk2-devel-2.18.9-0.23.1
[ 90s] [232/240] installing gnome-keyring-lang-2.28.2-1.14.30
[ 90s] [233/240] installing gnome-desktop-devel-2.28.2-0.6.18
[ 90s] [234/240] installing gnome-common-2.28.0-1.1.38
[ 90s] [235/240] installing gvfs-1.4.3-0.15.1
[ 90s] [236/240] installing gvfs-lang-1.4.3-0.15.1
[ 90s] [237/240] installing libgvfscommon0-1.4.3-0.15.1
[ 90s] [238/240] installing nautilus-2.28.4-1.16.16.4
[ 117s] [239/240] installing nautilus-lang-2.28.4-1.16.16.4
[ 117s] [240/240] installing nautilus-devel-2.28.4-1.16.16.4
[ 117s] removing nis flags from /var/cache/obs-build/sle/11.3/x86_64/etc/nsswitch.conf...
[ 117s] now finalizing build dir...
[ 118s] Checking permissions and ownerships - using the permissions files
[ 118s] /tmp/Check.perms.rhd9Nc
[ 118s] setting /dev/full to root:root 0666. (wrong permissions 0622)
[ 118s] Starting SuSEconfig, the SuSE Configuration Tool...
[ 118s] Running in full featured mode.
[ 118s] Reading /etc/sysconfig and updating the system...
[ 118s] Executing /sbin/conf.d/SuSEconfig.desktop-file-utils...
[ 118s] Executing /sbin/conf.d/SuSEconfig.glib2...
[ 118s] Executing /sbin/conf.d/SuSEconfig.groff...
[ 118s] Executing /sbin/conf.d/SuSEconfig.gtk2...
[ 119s] Executing /sbin/conf.d/SuSEconfig.permissions...
[ 119s] Finished.
[ 120s] -----------------------------------------------------------------
[ 120s] ----- building x2gognomebindings.spec (user abuild)
[ 120s] -----------------------------------------------------------------
[ 120s] -----------------------------------------------------------------
[ 120s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature /usr/src/packages/SOURCES/x2gognomebindings.spec
[ 120s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.83203
[ 120s] + umask 022
[ 120s] + cd /usr/src/packages/BUILD
[ 120s] + cd /usr/src/packages/BUILD
[ 120s] + rm -rf x2gognomebindings-2.0.2.2
[ 120s] + tar -xf -
[ 120s] + /usr/bin/gzip -dc /usr/src/packages/SOURCES/x2gognomebindings-2.0.2.2.tar.gz
[ 120s] + STATUS=0
[ 120s] + '[' 0 -ne 0 ']'
[ 120s] + cd x2gognomebindings-2.0.2.2
[ 120s] ++ /usr/bin/id -u
[ 120s] + '[' 399 = 0 ']'
[ 120s] ++ /usr/bin/id -u
[ 120s] + '[' 399 = 0 ']'
[ 120s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[ 120s] + exit 0
[ 120s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.83203
[ 120s] + umask 022
[ 120s] + cd /usr/src/packages/BUILD
[ 120s] + /bin/rm -rf /var/tmp/x2gognomebindings-2.0.2.2-build
[ 120s] ++ dirname /var/tmp/x2gognomebindings-2.0.2.2-build
[ 120s] + /bin/mkdir -p /var/tmp
[ 120s] + /bin/mkdir /var/tmp/x2gognomebindings-2.0.2.2-build
[ 120s] + cd x2gognomebindings-2.0.2.2
[ 120s] + '[' '!' -e configure ']'
[ 120s] + ./autogen.sh
[ 120s] /usr/bin/gnome-autogen.sh
[ 120s] checking for autoconf >= 2.53...
[ 120s] testing autoconf2.50... not found.
[ 121s] testing autoconf... found 2.63
[ 121s] checking for automake >= 1.7...
[ 121s] testing automake-1.11... not found.
[ 121s] testing automake-1.10... found 1.10.1
[ 121s] checking for libtool >= 1.4.3...
[ 121s] testing libtoolize... found 2.2.6
[ 121s] checking for glib-gettext >= 2.2.0...
[ 121s] testing glib-gettextize... found 2.22.5
[ 121s] checking for intltool >= 0.25...
[ 121s] testing intltoolize... found 0.40.5
[ 121s] checking for pkg-config >= 0.14.0...
[ 121s] testing pkg-config... found 0.23
[ 121s] Checking for required M4 macros...
[ 121s] Checking for forbidden M4 macros...
[ 121s] **Warning**: I am going to run `configure' with no arguments.
[ 121s] If you wish to pass any to it, please specify them on the
[ 121s] `./autogen.sh' command line.
[ 121s]
[ 121s] Processing ./configure.ac
[ 121s] Running libtoolize...
[ 122s] libtoolize: putting auxiliary files in `.'.
[ 122s] libtoolize: copying file `./ltmain.sh'
[ 122s] libtoolize: You should add the contents of the following files to `aclocal.m4':
[ 122s] libtoolize: `/usr/share/aclocal/libtool.m4'
[ 122s] libtoolize: `/usr/share/aclocal/ltoptions.m4'
[ 122s] libtoolize: `/usr/share/aclocal/ltversion.m4'
[ 122s] libtoolize: `/usr/share/aclocal/ltsugar.m4'
[ 122s] libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
[ 122s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
[ 122s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
[ 122s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
[ 122s] Running glib-gettextize... Ignore non-fatal messages.
[ 122s] Copying file mkinstalldirs
[ 122s] Copying file po/Makefile.in.in
[ 122s]
[ 122s] Please add the files
[ 122s] codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
[ 122s] progtest.m4
[ 122s] from the /usr/share/aclocal directory to your autoconf macro directory
[ 122s] or directly to your aclocal.m4 file.
[ 122s] You will also need config.guess and config.sub, which you can get from
[ 122s] ftp://ftp.gnu.org/pub/gnu/config/.
[ 122s]
[ 122s] Running intltoolize...
[ 122s] Running aclocal-1.10...
[ 124s] Running autoconf...
[ 125s] Running autoheader...
[ 126s] Running automake-1.10...
[ 127s] configure.ac:14: installing `./config.guess'
[ 127s] configure.ac:14: installing `./config.sub'
[ 127s] configure.ac:6: installing `./install-sh'
[ 127s] configure.ac:6: installing `./missing'
[ 127s] extension/Makefile.am: installing `./depcomp'
[ 127s] Running ./configure --enable-maintainer-mode ...
[ 127s] checking for a BSD-compatible install... /usr/bin/install -c
[ 128s] checking whether build environment is sane... yes
[ 129s] checking for a thread-safe mkdir -p... /bin/mkdir -p
[ 129s] checking for gawk... gawk
[ 129s] checking whether make sets $(MAKE)... yes
[ 129s] checking whether to enable maintainer-specific portions of Makefiles... yes
[ 129s] checking for gcc... gcc
[ 129s] checking for C compiler default output file name... a.out
[ 129s] checking whether the C compiler works... yes
[ 129s] checking whether we are cross compiling... no
[ 129s] checking for suffix of executables...
[ 129s] checking for suffix of object files... o
[ 129s] checking whether we are using the GNU C compiler... yes
[ 129s] checking whether gcc accepts -g... yes
[ 129s] checking for gcc option to accept ISO C89... none needed
[ 129s] checking for style of include used by make... GNU
[ 129s] checking dependency style of gcc... gcc3
[ 130s] checking build system type... x86_64-suse-linux-gnu
[ 130s] checking host system type... x86_64-suse-linux-gnu
[ 130s] checking for a sed that does not truncate output... /usr/bin/sed
[ 130s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 130s] checking for egrep... /usr/bin/grep -E
[ 130s] checking for fgrep... /usr/bin/grep -F
[ 130s] checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
[ 130s] checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
[ 130s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
[ 130s] checking the name lister (/usr/bin/nm -B) interface... BSD nm
[ 130s] checking whether ln -s works... yes
[ 130s] checking the maximum length of command line arguments... 1572864
[ 130s] checking whether the shell understands some XSI constructs... yes
[ 130s] checking whether the shell understands "+="... yes
[ 130s] checking for /usr/x86_64-suse-linux/bin/ld option to reload object files... -r
[ 130s] checking for objdump... objdump
[ 130s] checking how to recognize dependent libraries... pass_all
[ 130s] checking for ar... ar
[ 130s] checking for strip... strip
[ 130s] checking for ranlib... ranlib
[ 130s] checking command to parse /usr/bin/nm -B output from gcc object... ok
[ 130s] checking how to run the C preprocessor... gcc -E
[ 131s] checking for ANSI C header files... yes
[ 131s] checking for sys/types.h... yes
[ 131s] checking for sys/stat.h... yes
[ 131s] checking for stdlib.h... yes
[ 131s] checking for string.h... yes
[ 131s] checking for memory.h... yes
[ 131s] checking for strings.h... yes
[ 131s] checking for inttypes.h... yes
[ 131s] checking for stdint.h... yes
[ 132s] checking for unistd.h... yes
[ 132s] checking for dlfcn.h... yes
[ 132s] checking for objdir... .libs
[ 132s] checking if gcc supports -fno-rtti -fno-exceptions... no
[ 132s] checking for gcc option to produce PIC... -fPIC -DPIC
[ 132s] checking if gcc PIC flag -fPIC -DPIC works... yes
[ 132s] checking if gcc static flag -static works... yes
[ 132s] checking if gcc supports -c -o file.o... yes
[ 132s] checking if gcc supports -c -o file.o... (cached) yes
[ 132s] checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
[ 132s] checking whether -lc should be explicitly linked in... no
[ 132s] checking dynamic linker characteristics... GNU/Linux ld.so
[ 132s] checking how to hardcode library paths into programs... immediate
[ 132s] checking whether stripping libraries is possible... yes
[ 132s] checking if libtool supports shared libraries... yes
[ 132s] checking whether to build shared libraries... yes
[ 132s] checking whether to build static libraries... no
[ 132s] checking for a BSD-compatible install... /usr/bin/install -c
[ 132s] checking whether make sets $(MAKE)... (cached) yes
[ 132s] checking for pkg-config... /usr/bin/pkg-config
[ 132s] checking pkg-config is at least version 0.9.0... yes
[ 133s] checking for NAUTILUS_X2GOUMOUNT... configure: error: Package requirements ( glib-2.0 >= 2.4.0 gtk+-2.0 >= 2.4.0 gmodule-2.0 >= 2.4.0 libgnome-2.0 >= 2.7.0) were not met:
[ 133s]
[ 133s] No package 'libgnome-2.0' found
[ 133s]
[ 133s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 133s] installed software in a non-standard prefix.
[ 133s]
[ 133s] Alternatively, you may set the environment variables NAUTILUS_X2GOUMOUNT_CFLAGS
[ 133s] and NAUTILUS_X2GOUMOUNT_LIBS to avoid the need to call pkg-config.
[ 133s] See the pkg-config man page for more details.
[ 133s]
[ 133s] error: Bad exit status from /var/tmp/rpm-tmp.83203 (%build)
[ 133s]
[ 133s]
[ 133s] RPM build errors:
[ 133s] Bad exit status from /var/tmp/rpm-tmp.83203 (%build)
+ rm -Rf /var/lib/jenkins/tmp/tmp.3Orch9ZutM
+ exit -1
Build step 'Execute shell' marked build as failure
More information about the x2go-commits
mailing list