[X2Go-Commits] x2gomatebindings.git - master (branch) updated: 24ce94654937aee6f37ab16a7bca15c50eead3bf

X2Go dev team git-admin at x2go.org
Wed Jul 24 06:22:05 CEST 2013


The branch, master has been updated
       via  24ce94654937aee6f37ab16a7bca15c50eead3bf (commit)
      from  d1a6dda19ee069f1a7090d9be8e590692863ce69 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 24ce94654937aee6f37ab16a7bca15c50eead3bf
Author: Moritz Morty Strübe <morty at gmx.net>
Date:   Thu Jan 27 21:06:42 2011 +0100

    Housekeeping + Typos

-----------------------------------------------------------------------

Summary of changes:
 debian/control                       |    4 +-
 debian/cron.d.ex                     |    4 -
 debian/emacsen-install.ex            |   45 ------
 debian/emacsen-remove.ex             |   15 --
 debian/emacsen-startup.ex            |   25 ---
 debian/init.d.ex                     |  157 ------------------
 debian/init.d.lsb.ex                 |  296 ----------------------------------
 debian/manpage.1.ex                  |   59 -------
 debian/manpage.sgml.ex               |  156 ------------------
 debian/manpage.xml.ex                |  291 ---------------------------------
 debian/menu.ex                       |    2 -
 debian/postinst.ex                   |   41 -----
 debian/postrm.ex                     |   39 -----
 debian/preinst.ex                    |   37 -----
 debian/prerm.ex                      |   40 -----
 debian/watch.ex                      |   23 ---
 debian/x2gognomebindings.default.ex  |   10 --
 debian/x2gognomebindings.doc-base.EX |   22 ---
 po/Makefile                          |    2 +-
 po/Makefile.in                       |    2 +-
 20 files changed, 4 insertions(+), 1266 deletions(-)
 delete mode 100644 debian/cron.d.ex
 delete mode 100644 debian/emacsen-install.ex
 delete mode 100644 debian/emacsen-remove.ex
 delete mode 100644 debian/emacsen-startup.ex
 delete mode 100644 debian/init.d.ex
 delete mode 100644 debian/init.d.lsb.ex
 delete mode 100644 debian/manpage.1.ex
 delete mode 100644 debian/manpage.sgml.ex
 delete mode 100644 debian/manpage.xml.ex
 delete mode 100644 debian/menu.ex
 delete mode 100644 debian/postinst.ex
 delete mode 100644 debian/postrm.ex
 delete mode 100644 debian/preinst.ex
 delete mode 100644 debian/prerm.ex
 delete mode 100644 debian/watch.ex
 delete mode 100644 debian/x2gognomebindings.default.ex
 delete mode 100644 debian/x2gognomebindings.doc-base.EX

The diff of changes is:
diff --git a/debian/control b/debian/control
index fd8bc6e..430d6f8 100644
--- a/debian/control
+++ b/debian/control
@@ -17,7 +17,7 @@ Description: Description: x2gognomebindings (GNOME mimetypes for x2go)
  - client side mass storage mounting support
  - audio/arts support
  - authentification by smartcard and usb-stick
- - kde control-center modules for administration
- - kde based tools for just in time messaging and client surveillance
+ - KDE control-center modules for administration
+ - KDE based tools for just in time messaging and client surveillance
  .
  x2gognomebindings contains mimetype information for x2go.
diff --git a/debian/cron.d.ex b/debian/cron.d.ex
deleted file mode 100644
index 03f6049..0000000
--- a/debian/cron.d.ex
+++ /dev/null
@@ -1,4 +0,0 @@
-#
-# Regular cron jobs for the x2gognomebindings package
-#
-0 4	* * *	root	[ -x /usr/bin/x2gognomebindings_maintenance ] && /usr/bin/x2gognomebindings_maintenance
diff --git a/debian/emacsen-install.ex b/debian/emacsen-install.ex
deleted file mode 100644
index 999f3c8..0000000
--- a/debian/emacsen-install.ex
+++ /dev/null
@@ -1,45 +0,0 @@
-#! /bin/sh -e
-# /usr/lib/emacsen-common/packages/install/x2gognomebindings
-
-# Written by Jim Van Zandt <jrv at debian.org>, borrowing heavily
-# from the install scripts for gettext by Santiago Vila
-# <sanvila at ctv.es> and octave by Dirk Eddelbuettel <edd at debian.org>.
-
-FLAVOR=$1
-PACKAGE=x2gognomebindings
-
-if [ ${FLAVOR} = emacs ]; then exit 0; fi
-
-echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR}
-
-#FLAVORTEST=`echo $FLAVOR | cut -c-6`
-#if [ ${FLAVORTEST} = xemacs ] ; then
-#    SITEFLAG="-no-site-file"
-#else
-#    SITEFLAG="--no-site-file"
-#fi
-FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
-
-ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
-ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-
-# Install-info-altdir does not actually exist.
-# Maybe somebody will write it.
-if test -x /usr/sbin/install-info-altdir; then
-    echo install/${PACKAGE}: install Info links for ${FLAVOR}
-    install-info-altdir --quiet --section "" "" --dirname=${FLAVOR} /usr/share/info/${PACKAGE}.info.gz
-fi
-
-install -m 755 -d ${ELCDIR}
-cd ${ELDIR}
-FILES=`echo *.el`
-cp ${FILES} ${ELCDIR}
-cd ${ELCDIR}
-
-cat << EOF > path.el
-(setq load-path (cons "." load-path) byte-compile-warnings nil)
-EOF
-${FLAVOR} ${FLAGS} ${FILES}
-rm -f *.el path.el
-
-exit 0
diff --git a/debian/emacsen-remove.ex b/debian/emacsen-remove.ex
deleted file mode 100644
index 197353b..0000000
--- a/debian/emacsen-remove.ex
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh -e
-# /usr/lib/emacsen-common/packages/remove/x2gognomebindings
-
-FLAVOR=$1
-PACKAGE=x2gognomebindings
-
-if [ ${FLAVOR} != emacs ]; then
-    if test -x /usr/sbin/install-info-altdir; then
-        echo remove/${PACKAGE}: removing Info links for ${FLAVOR}
-        install-info-altdir --quiet --remove --dirname=${FLAVOR} /usr/share/info/x2gognomebindings.info.gz
-    fi
-
-    echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR}
-    rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-fi
diff --git a/debian/emacsen-startup.ex b/debian/emacsen-startup.ex
deleted file mode 100644
index e9dd96b..0000000
--- a/debian/emacsen-startup.ex
+++ /dev/null
@@ -1,25 +0,0 @@
-;; -*-emacs-lisp-*-
-;;
-;; Emacs startup file, e.g.  /etc/emacs/site-start.d/50x2gognomebindings.el
-;; for the Debian x2gognomebindings package
-;;
-;; Originally contributed by Nils Naumann <naumann at unileoben.ac.at>
-;; Modified by Dirk Eddelbuettel <edd at debian.org>
-;; Adapted for dh-make by Jim Van Zandt <jrv at debian.org>
-
-;; The x2gognomebindings package follows the Debian/GNU Linux 'emacsen' policy and
-;; byte-compiles its elisp files for each 'emacs flavor' (emacs19,
-;; xemacs19, emacs20, xemacs20...).  The compiled code is then
-;; installed in a subdirectory of the respective site-lisp directory.
-;; We have to add this to the load-path:
-(let ((package-dir (concat "/usr/share/"
-                           (symbol-name flavor)
-                           "/site-lisp/x2gognomebindings")))
-;; If package-dir does not exist, the x2gognomebindings package must have
-;; removed but not purged, and we should skip the setup.
-  (when (file-directory-p package-dir)
-        (setq load-path (cons package-dir load-path))
-       (autoload 'x2gognomebindings-mode "x2gognomebindings-mode"
-         "Major mode for editing x2gognomebindings files." t)
-       (add-to-list 'auto-mode-alist '("\\.x2gognomebindings$" . x2gognomebindings-mode))))
-
diff --git a/debian/init.d.ex b/debian/init.d.ex
deleted file mode 100644
index d0ef878..0000000
--- a/debian/init.d.ex
+++ /dev/null
@@ -1,157 +0,0 @@
-#! /bin/sh
-#
-# skeleton	example file to build /etc/init.d/ scripts.
-#		This file should be used to construct scripts for /etc/init.d.
-#
-#		Written by Miquel van Smoorenburg <miquels at cistron.nl>.
-#		Modified for Debian
-#		by Ian Murdock <imurdock at gnu.ai.mit.edu>.
-#               Further changes by Javier Fernandez-Sanguino <jfs at debian.org>
-#
-# Version:	@(#)skeleton  1.9  26-Feb-2001  miquels at cistron.nl
-#
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/sbin/x2gognomebindings
-NAME=x2gognomebindings
-DESC=x2gognomebindings
-
-test -x $DAEMON || exit 0
-
-LOGDIR=/var/log/x2gognomebindings
-PIDFILE=/var/run/$NAME.pid
-DODTIME=1                   # Time to wait for the server to die, in seconds
-                            # If this value is set too low you might not
-                            # let some servers to die gracefully and
-                            # 'restart' will not work
-
-# Include x2gognomebindings defaults if available
-if [ -f /etc/default/x2gognomebindings ] ; then
-	. /etc/default/x2gognomebindings
-fi
-
-set -e
-
-running_pid()
-{
-    # Check if a given process pid's cmdline matches a given name
-    pid=$1
-    name=$2
-    [ -z "$pid" ] && return 1
-    [ ! -d /proc/$pid ] &&  return 1
-    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
-    # Is this the expected child?
-    [ "$cmd" != "$name" ] &&  return 1
-    return 0
-}
-
-running()
-{
-# Check if the process is running looking at /proc
-# (works for all users)
-
-    # No pidfile, probably no daemon present
-    [ ! -f "$PIDFILE" ] && return 1
-    # Obtain the pid and check it against the binary name
-    pid=`cat $PIDFILE`
-    running_pid $pid $DAEMON || return 1
-    return 0
-}
-
-force_stop() {
-# Forcefully kill the process
-    [ ! -f "$PIDFILE" ] && return
-    if running ; then
-        kill -15 $pid
-        # Is it really dead?
-        [ -n "$DODTIME" ] && sleep "$DODTIME"s
-        if running ; then
-            kill -9 $pid
-            [ -n "$DODTIME" ] && sleep "$DODTIME"s
-            if running ; then
-                echo "Cannot kill $LABEL (pid=$pid)!"
-                exit 1
-            fi
-        fi
-    fi
-    rm -f $PIDFILE
-    return 0
-}
-
-case "$1" in
-  start)
-	echo -n "Starting $DESC: "
-	start-stop-daemon --start --quiet --pidfile $PIDFILE \
-		--exec $DAEMON -- $DAEMON_OPTS
-        if running ; then
-            echo "$NAME."
-        else
-            echo " ERROR."
-        fi
-	;;
-  stop)
-	echo -n "Stopping $DESC: "
-	start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-		--exec $DAEMON
-	echo "$NAME."
-	;;
-  force-stop)
-	echo -n "Forcefully stopping $DESC: "
-        force_stop
-        if ! running ; then
-            echo "$NAME."
-        else
-            echo " ERROR."
-        fi
-	;;
-  #reload)
-	#
-	#	If the daemon can reload its config files on the fly
-	#	for example by sending it SIGHUP, do it here.
-	#
-	#	If the daemon responds to changes in its config file
-	#	directly anyway, make this a do-nothing entry.
-	#
-	# echo "Reloading $DESC configuration files."
-	# start-stop-daemon --stop --signal 1 --quiet --pidfile \
-	#	/var/run/$NAME.pid --exec $DAEMON
-  #;;
-  force-reload)
-	#
-	#	If the "reload" option is implemented, move the "force-reload"
-	#	option to the "reload" entry above. If not, "force-reload" is
-	#	just the same as "restart" except that it does nothing if the
-	#   daemon isn't already running.
-	# check wether $DAEMON is running. If so, restart
-	start-stop-daemon --stop --test --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON \
-	&& $0 restart \
-	|| exit 0
-	;;
-  restart)
-    echo -n "Restarting $DESC: "
-	start-stop-daemon --stop --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON
-	[ -n "$DODTIME" ] && sleep $DODTIME
-	start-stop-daemon --start --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS
-	echo "$NAME."
-	;;
-  status)
-    echo -n "$LABEL is "
-    if running ;  then
-        echo "running"
-    else
-        echo " not running."
-        exit 1
-    fi
-    ;;
-  *)
-	N=/etc/init.d/$NAME
-	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $N {start|stop|restart|force-reload|status|force-stop}" >&2
-	exit 1
-	;;
-esac
-
-exit 0
diff --git a/debian/init.d.lsb.ex b/debian/init.d.lsb.ex
deleted file mode 100644
index 07625a7..0000000
--- a/debian/init.d.lsb.ex
+++ /dev/null
@@ -1,296 +0,0 @@
-#!/bin/sh
-#
-# Example init.d script with LSB support.
-#
-# Please read this init.d carefully and modify the sections to
-# adjust it to the program you want to run.
-#
-# Copyright (c) 2007 Javier Fernandez-Sanguino <jfs at debian.org>
-#
-# This is free software; you may redistribute it and/or modify
-# it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2,
-# or (at your option) any later version.
-#
-# This is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License with
-# the Debian operating system, in /usr/share/common-licenses/GPL;  if
-# not, write to the Free Software Foundation, Inc., 59 Temple Place,
-# Suite 330, Boston, MA 02111-1307 USA
-#
-### BEGIN INIT INFO
-# Provides:          x2gognomebindings
-# Required-Start:    $network $local_fs
-# Required-Stop:
-# Should-Start:      $named
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: <Enter a short description of the sortware>
-# Description:       <Enter a long description of the software>
-#                    <...>
-#                    <...>
-### END INIT INFO
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-
-DAEMON=/usr/sbin/x2gognomebindings # Introduce the server's location here
-NAME=#PACKAGE              # Introduce the short server's name here
-DESC=#PACKAGE              # Introduce a short description here
-LOGDIR=/var/log/x2gognomebindings  # Log directory to use
-
-PIDFILE=/var/run/$NAME.pid
-
-test -x $DAEMON || exit 0
-
-. /lib/lsb/init-functions
-
-# Default options, these can be overriden by the information
-# at /etc/default/$NAME
-DAEMON_OPTS=""          # Additional options given to the server
-
-DIETIME=10              # Time to wait for the server to die, in seconds
-                        # If this value is set too low you might not
-                        # let some servers to die gracefully and
-                        # 'restart' will not work
-
-#STARTTIME=2             # Time to wait for the server to start, in seconds
-                        # If this value is set each time the server is
-                        # started (on start or restart) the script will
-                        # stall to try to determine if it is running
-                        # If it is not set and the server takes time
-                        # to setup a pid file the log message might 
-                        # be a false positive (says it did not start
-                        # when it actually did)
-                        
-LOGFILE=$LOGDIR/$NAME.log  # Server logfile
-#DAEMONUSER=x2gognomebindings   # Users to run the daemons as. If this value
-                        # is set start-stop-daemon will chuid the server
-
-# Include defaults if available
-if [ -f /etc/default/$NAME ] ; then
-	. /etc/default/$NAME
-fi
-
-# Use this if you want the user to explicitly set 'RUN' in
-# /etc/default/
-#if [ "x$RUN" != "xyes" ] ; then
-#    log_failure_msg "$NAME disabled, please adjust the configuration to your needs "
-#    log_failure_msg "and then set RUN to 'yes' in /etc/default/$NAME to enable it."
-#    exit 1
-#fi
-
-# Check that the user exists (if we set a user)
-# Does the user exist?
-if [ -n "$DAEMONUSER" ] ; then
-    if getent passwd | grep -q "^$DAEMONUSER:"; then
-        # Obtain the uid and gid
-        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
-        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
-    else
-        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
-        exit 1
-    fi
-fi
-
-
-set -e
-
-running_pid() {
-# Check if a given process pid's cmdline matches a given name
-    pid=$1
-    name=$2
-    [ -z "$pid" ] && return 1
-    [ ! -d /proc/$pid ] &&  return 1
-    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
-    # Is this the expected server
-    [ "$cmd" != "$name" ] &&  return 1
-    return 0
-}
-
-running() {
-# Check if the process is running looking at /proc
-# (works for all users)
-
-    # No pidfile, probably no daemon present
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=`cat $PIDFILE`
-    running_pid $pid $DAEMON || return 1
-    return 0
-}
-
-start_server() {
-# Start the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            start_daemon -p $PIDFILE $DAEMON -- $DAEMON_OPTS
-            errcode=$?
-        else
-# if we are using a daemonuser then change the user id
-            start-stop-daemon --start --quiet --pidfile $PIDFILE \
-                        --chuid $DAEMONUSER \
-                        --exec $DAEMON -- $DAEMON_OPTS
-            errcode=$?
-        fi
-	return $errcode
-}
-
-stop_server() {
-# Stop the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            killproc -p $PIDFILE $DAEMON
-            errcode=$?
-        else
-# if we are using a daemonuser then look for process that match
-            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-                        --user $DAEMONUSER \
-                        --exec $DAEMON
-            errcode=$?
-        fi
-
-	return $errcode
-}
-
-reload_server() {
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=pidofproc $PIDFILE # This is the daemon's pid
-    # Send a SIGHUP
-    kill -1 $pid
-    return $?
-}
-
-force_stop() {
-# Force the process to die killing it manually
-	[ ! -e "$PIDFILE" ] && return
-	if running ; then
-		kill -15 $pid
-	# Is it really dead?
-		sleep "$DIETIME"s
-		if running ; then
-			kill -9 $pid
-			sleep "$DIETIME"s
-			if running ; then
-				echo "Cannot kill $NAME (pid=$pid)!"
-				exit 1
-			fi
-		fi
-	fi
-	rm -f $PIDFILE
-}
-
-
-case "$1" in
-  start)
-	log_daemon_msg "Starting $DESC " "$NAME"
-        # Check if it's running first
-        if running ;  then
-            log_progress_msg "apparently already running"
-            log_end_msg 0
-            exit 0
-        fi
-        if start_server ; then
-            # NOTE: Some servers might die some time after they start,
-            # this code will detect this issue if STARTTIME is set
-            # to a reasonable value
-            [ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time 
-            if  running ;  then
-                # It's ok, the server started and is running
-                log_end_msg 0
-            else
-                # It is not running after we did start
-                log_end_msg 1
-            fi
-        else
-            # Either we could not start it
-            log_end_msg 1
-        fi
-	;;
-  stop)
-        log_daemon_msg "Stopping $DESC" "$NAME"
-        if running ; then
-            # Only stop the server if we see it running
-			errcode=0
-            stop_server || errcode=$?
-            log_end_msg $errcode
-        else
-            # If it's not running don't do anything
-            log_progress_msg "apparently not running"
-            log_end_msg 0
-            exit 0
-        fi
-        ;;
-  force-stop)
-        # First try to stop gracefully the program
-        $0 stop
-        if running; then
-            # If it's still running try to kill it more forcefully
-            log_daemon_msg "Stopping (force) $DESC" "$NAME"
-			errcode=0
-            force_stop || errcode=$?
-            log_end_msg $errcode
-        fi
-	;;
-  restart|force-reload)
-        log_daemon_msg "Restarting $DESC" "$NAME"
-		errcode=0
-        stop_server || errcode=$?
-        # Wait some sensible amount, some server need this
-        [ -n "$DIETIME" ] && sleep $DIETIME
-        start_server || errcode=$?
-        [ -n "$STARTTIME" ] && sleep $STARTTIME
-        running || errcode=$?
-        log_end_msg $errcode
-	;;
-  status)
-
-        log_daemon_msg "Checking status of $DESC" "$NAME"
-        if running ;  then
-            log_progress_msg "running"
-            log_end_msg 0
-        else
-            log_progress_msg "apparently not running"
-            log_end_msg 1
-            exit 1
-        fi
-        ;;
-  # Use this if the daemon cannot reload
-  reload)
-        log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
-        log_warning_msg "cannot re-read the config file (use restart)."
-        ;;
-  # And this if it cann
-  #reload)
-          #
-          # If the daemon can reload its config files on the fly
-          # for example by sending it SIGHUP, do it here.
-          #
-          # If the daemon responds to changes in its config file
-          # directly anyway, make this a do-nothing entry.
-          #
-          # log_daemon_msg "Reloading $DESC configuration files" "$NAME"
-          # if running ; then
-          #    reload_server
-          #    if ! running ;  then
-          # Process died after we tried to reload
-          #       log_progress_msg "died on reload"
-          #       log_end_msg 1
-          #       exit 1
-          #    fi
-          # else
-          #    log_progress_msg "server is not running"
-          #    log_end_msg 1
-          #    exit 1
-          # fi
-                                                                                    #;;
-
-  *)
-	N=/etc/init.d/$NAME
-	echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
-	exit 1
-	;;
-esac
-
-exit 0
diff --git a/debian/manpage.1.ex b/debian/manpage.1.ex
deleted file mode 100644
index 92ab531..0000000
--- a/debian/manpage.1.ex
+++ /dev/null
@@ -1,59 +0,0 @@
-.\"                                      Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH X2GOGNOMEBINDINGS SECTION "August 27, 2008"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh        disable hyphenation
-.\" .hy        enable hyphenation
-.\" .ad l      left justify
-.\" .ad b      justify to both left and right margins
-.\" .nf        disable filling
-.\" .fi        enable filling
-.\" .br        insert line break
-.\" .sp <n>    insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-x2gognomebindings \- program to do something
-.SH SYNOPSIS
-.B x2gognomebindings
-.RI [ options ] " files" ...
-.br
-.B bar
-.RI [ options ] " files" ...
-.SH DESCRIPTION
-This manual page documents briefly the
-.B x2gognomebindings
-and
-.B bar
-commands.
-.PP
-.\" TeX users may be more comfortable with the \fB<whatever>\fP and
-.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
-.\" respectively.
-\fBx2gognomebindings\fP is a program that...
-.SH OPTIONS
-These programs follow the usual GNU command line syntax, with long
-options starting with two dashes (`-').
-A summary of options is included below.
-For a complete description, see the Info files.
-.TP
-.B \-h, \-\-help
-Show summary of options.
-.TP
-.B \-v, \-\-version
-Show version of program.
-.SH SEE ALSO
-.BR bar (1),
-.BR baz (1).
-.br
-The programs are documented fully by
-.IR "The Rise and Fall of a Fooish Bar" ,
-available via the Info system.
-.SH AUTHOR
-x2gognomebindings was written by <upstream author>.
-.PP
-This manual page was written by Oleksandr Shneyder <oleksandr.shneyder at obviously-nice.de>,
-for the Debian project (but may be used by others).
diff --git a/debian/manpage.sgml.ex b/debian/manpage.sgml.ex
deleted file mode 100644
index 68bab91..0000000
--- a/debian/manpage.sgml.ex
+++ /dev/null
@@ -1,156 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Process this file with docbook-to-man to generate an nroff manual
-     page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
-     the manual page with: `docbook-to-man manpage.sgml | nroff -man |
-     less'.  A typical entry in a Makefile or Makefile.am is:
-
-manpage.1: manpage.sgml
-	docbook-to-man $< > $@
-
-
-	The docbook-to-man binary is found in the docbook-to-man package.
-	Please remember that if you create the nroff version in one of the
-	debian/rules file targets (such as build), you will need to include
-	docbook-to-man in your Build-Depends control field.
-
-  -->
-
-  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
-  <!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>">
-  <!ENTITY dhsurname   "<surname>SURNAME</surname>">
-  <!-- Please adjust the date whenever revising the manpage. -->
-  <!ENTITY dhdate      "<date>August 27, 2008</date>">
-  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
-       allowed: see man(7), man(1). -->
-  <!ENTITY dhsection   "<manvolnum>SECTION</manvolnum>">
-  <!ENTITY dhemail     "<email>oleksandr.shneyder at obviously-nice.de</email>">
-  <!ENTITY dhusername  "Oleksandr Shneyder">
-  <!ENTITY dhucpackage "<refentrytitle>X2GOGNOMEBINDINGS</refentrytitle>">
-  <!ENTITY dhpackage   "x2gognomebindings">
-
-  <!ENTITY debian      "<productname>Debian</productname>">
-  <!ENTITY gnu         "<acronym>GNU</acronym>">
-  <!ENTITY gpl         "&gnu; <acronym>GPL</acronym>">
-]>
-
-<refentry>
-  <refentryinfo>
-    <address>
-      &dhemail;
-    </address>
-    <author>
-      &dhfirstname;
-      &dhsurname;
-    </author>
-    <copyright>
-      <year>2003</year>
-      <holder>&dhusername;</holder>
-    </copyright>
-    &dhdate;
-  </refentryinfo>
-  <refmeta>
-    &dhucpackage;
-
-    &dhsection;
-  </refmeta>
-  <refnamediv>
-    <refname>&dhpackage;</refname>
-
-    <refpurpose>program to do something</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-
-      <arg><option>-e <replaceable>this</replaceable></option></arg>
-
-      <arg><option>--example <replaceable>that</replaceable></option></arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1>
-    <title>DESCRIPTION</title>
-
-    <para>This manual page documents briefly the
-      <command>&dhpackage;</command> and <command>bar</command>
-      commands.</para>
-
-    <para>This manual page was written for the &debian; distribution
-      because the original program does not have a manual page.
-      Instead, it has documentation in the &gnu;
-      <application>Info</application> format; see below.</para>
-
-    <para><command>&dhpackage;</command> is a program that...</para>
-
-  </refsect1>
-  <refsect1>
-    <title>OPTIONS</title>
-
-    <para>These programs follow the usual &gnu; command line syntax,
-      with long options starting with two dashes (`-').  A summary of
-      options is included below.  For a complete description, see the
-      <application>Info</application> files.</para>
-
-    <variablelist>
-      <varlistentry>
-        <term><option>-h</option>
-          <option>--help</option>
-        </term>
-        <listitem>
-          <para>Show summary of options.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-v</option>
-          <option>--version</option>
-        </term>
-        <listitem>
-          <para>Show version of program.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1>
-    <title>SEE ALSO</title>
-
-    <para>bar (1), baz (1).</para>
-
-    <para>The programs are documented fully by <citetitle>The Rise and
-      Fall of a Fooish Bar</citetitle> available via the
-      <application>Info</application> system.</para>
-  </refsect1>
-  <refsect1>
-    <title>AUTHOR</title>
-
-    <para>This manual page was written by &dhusername; &dhemail; for
-      the &debian; system (but may be used by others).  Permission is
-      granted to copy, distribute and/or modify this document under
-      the terms of the &gnu; General Public License, Version 2 any
-	  later version published by the Free Software Foundation.
-    </para>
-	<para>
-	  On Debian systems, the complete text of the GNU General Public
-	  License can be found in /usr/share/common-licenses/GPL.
-	</para>
-
-  </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
-
-
diff --git a/debian/manpage.xml.ex b/debian/manpage.xml.ex
deleted file mode 100644
index 8926e77..0000000
--- a/debian/manpage.xml.ex
+++ /dev/null
@@ -1,291 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-
-<!--
-
-`xsltproc -''-nonet \
-          -''-param man.charmap.use.subset "0" \
-          -''-param make.year.ranges "1" \
-          -''-param make.single.year.ranges "1" \
-          /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
-          manpage.xml'
-
-A manual page <package>.<section> will be generated. You may view the
-manual page with: nroff -man <package>.<section> | less'. A typical entry
-in a Makefile or Makefile.am is:
-
-DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/nwalsh/manpages/docbook.xsl
-XP     = xsltproc -''-nonet -''-param man.charmap.use.subset "0"
-
-manpage.1: manpage.xml
-        $(XP) $(DB2MAN) $<
-
-The xsltproc binary is found in the xsltproc package. The XSL files are in
-docbook-xsl. A description of the parameters you can use can be found in the
-docbook-xsl-doc-* packages. Please remember that if you create the nroff
-version in one of the debian/rules file targets (such as build), you will need
-to include xsltproc and docbook-xsl in your Build-Depends control field.
-Alternatively use the xmlto command/package. That will also automatically
-pull in xsltproc and docbook-xsl.
-
-Notes for using docbook2x: docbook2x-man does not automatically create the
-AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as
-<refsect1> ... </refsect1>.
-
-To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections
-read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be
-found in the docbook-xsl-doc-html package.
-
-Validation can be done using: `xmllint -''-noout -''-valid manpage.xml`
-
-General documentation about man-pages and man-page-formatting:
-man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/
-
--->
-
-  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
-  <!ENTITY dhfirstname "FIRSTNAME">
-  <!ENTITY dhsurname   "SURNAME">
-  <!-- dhusername could also be set to "&firstname; &surname;". -->  
-  <!ENTITY dhusername  "Oleksandr Shneyder">
-  <!ENTITY dhemail     "oleksandr.shneyder at obviously-nice.de">
-  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
-       allowed: see man(7), man(1) and
-       http://www.tldp.org/HOWTO/Man-Page/q2.html. -->
-  <!ENTITY dhsection   "SECTION">
-  <!-- TITLE should be something like "User commands" or similar (see
-       http://www.tldp.org/HOWTO/Man-Page/q2.html). -->
-  <!ENTITY dhtitle     "x2gognomebindings User Manual">
-  <!ENTITY dhucpackage "X2GOGNOMEBINDINGS">
-  <!ENTITY dhpackage   "x2gognomebindings">
-]>
-
-<refentry>
-  <refentryinfo>
-    <title>&dhtitle;</title>
-    <productname>&dhpackage;</productname>
-    <authorgroup>
-      <author>
-       <firstname>&dhfirstname;</firstname>
-        <surname>&dhsurname;</surname>
-        <contrib>Wrote this manpage for the Debian system.</contrib>
-        <address>
-          <email>&dhemail;</email>
-        </address>
-      </author>
-    </authorgroup>
-    <copyright>
-      <year>2007</year>
-      <holder>&dhusername;</holder>
-    </copyright>
-    <legalnotice>
-      <para>This manual page was written for the Debian system
-        (but may be used by others).</para>
-      <para>Permission is granted to copy, distribute and/or modify this
-        document under the terms of the GNU General Public License,
-        Version 2 or (at your option) any later version published by
-        the Free Software Foundation.</para>
-      <para>On Debian systems, the complete text of the GNU General Public
-        License can be found in
-	<filename>/usr/share/common-licenses/GPL</filename>.</para>
-    </legalnotice>
-  </refentryinfo>
-  <refmeta>
-    <refentrytitle>&dhucpackage;</refentrytitle>
-    <manvolnum>&dhsection;</manvolnum>
-  </refmeta>
-  <refnamediv>
-    <refname>&dhpackage;</refname>
-    <refpurpose>program to do something</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-      <!-- These are several examples, how syntaxes could look -->
-      <arg choice="plain"><option>-e <replaceable>this</replaceable></option></arg>
-      <arg choice="opt"><option>--example=<parameter>that</parameter></option></arg>
-      <arg choice="opt">
-        <group choice="req">
-          <arg choice="plain"><option>-e</option></arg>
-          <arg choice="plain"><option>--example</option></arg>
-        </group>
-        <replaceable class="option">this</replaceable>
-      </arg>
-      <arg choice="opt">
-        <group choice="req">
-          <arg choice="plain"><option>-e</option></arg>
-          <arg choice="plain"><option>--example</option></arg>
-        </group>
-        <group choice="req">
-          <arg choice="plain"><replaceable>this</replaceable></arg>
-          <arg choice="plain"><replaceable>that</replaceable></arg>
-        </group>
-      </arg>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-      <!-- Normally the help and version options make the programs stop
-           right after outputting the requested information. -->
-      <group choice="opt">
-        <arg choice="plain">
-          <group choice="req">
-            <arg choice="plain"><option>-h</option></arg>
-            <arg choice="plain"><option>--help</option></arg>
-          </group>
-        </arg>
-        <arg choice="plain">
-          <group choice="req">
-            <arg choice="plain"><option>-v</option></arg>
-            <arg choice="plain"><option>--version</option></arg>
-          </group>
-        </arg>
-      </group>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1 id="description">
-    <title>DESCRIPTION</title>
-    <para>This manual page documents briefly the
-      <command>&dhpackage;</command> and <command>bar</command>
-      commands.</para>
-    <para>This manual page was written for the Debian distribution
-      because the original program does not have a manual page.
-      Instead, it has documentation in the GNU <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> format; see below.</para>
-    <para><command>&dhpackage;</command> is a program that...</para>
-  </refsect1>
-  <refsect1 id="options">
-    <title>OPTIONS</title>
-    <para>The program follows the usual GNU command line syntax,
-      with long options starting with two dashes (`-').  A summary of
-      options is included below.  For a complete description, see the
-      <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> files.</para>
-    <variablelist>
-      <!-- Use the variablelist.term.separator and the
-           variablelist.term.break.after parameters to
-           control the term elements. -->
-      <varlistentry>
-        <term><option>-e <replaceable>this</replaceable></option></term>
-        <term><option>--example=<replaceable>that</replaceable></option></term>
-        <listitem>
-          <para>Does this and that.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-h</option></term>
-        <term><option>--help</option></term>
-        <listitem>
-          <para>Show summary of options.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-v</option></term>
-        <term><option>--version</option></term>
-        <listitem>
-          <para>Show version of program.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="files">
-    <title>FILES</title>
-    <variablelist>
-      <varlistentry>
-        <term><filename>/etc/foo.conf</filename></term>
-        <listitem>
-          <para>The system-wide configuration file to control the
-            behaviour of <application>&dhpackage;</application>. See
-            <citerefentry>
-              <refentrytitle>foo.conf</refentrytitle>
-              <manvolnum>5</manvolnum>
-            </citerefentry> for further details.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><filename>${HOME}/.foo.conf</filename></term>
-        <listitem>
-          <para>The per-user configuration file to control the
-             behaviour of <application>&dhpackage;</application>. See
-             <citerefentry>
-               <refentrytitle>foo.conf</refentrytitle>
-               <manvolnum>5</manvolnum>
-             </citerefentry> for further details.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="environment">
-    <title>ENVIONMENT</title>
-    <variablelist>
-      <varlistentry>
-        <term><envar>FOO_CONF</envar></term>
-        <listitem>
-          <para>If used, the defined file is used as configuration
-            file (see also <xref linkend="files"/>).</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="diagnostics">
-    <title>DIAGNOSTICS</title>
-    <para>The following diagnostics may be issued
-      on <filename class="devicefile">stderr</filename>:</para>
-    <variablelist>
-      <varlistentry>
-        <term><errortext>Bad configuration file. Exiting.</errortext></term>
-        <listitem>
-          <para>The configuration file seems to contain a broken configuration
-            line. Use the <option>--verbose</option> option, to get more info.
-          </para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-    <para><command>&dhpackage;</command> provides some return codes, that can
-      be used in scripts:</para>
-    <segmentedlist>
-      <segtitle>Code</segtitle>
-      <segtitle>Diagnostic</segtitle>
-      <seglistitem>
-        <seg><errorcode>0</errorcode></seg>
-        <seg>Program exited successfully.</seg>
-      </seglistitem>
-      <seglistitem>
-        <seg><errorcode>1</errorcode></seg>
-        <seg>The configuration file seems to be broken.</seg>
-      </seglistitem>
-    </segmentedlist>
-  </refsect1>
-  <refsect1 id="bugs">
-    <!-- Or use this section to tell about upstream BTS. -->
-    <title>BUGS</title>
-    <para>The program is currently limited to only work
-      with the <package>foobar</package> library.</para>
-    <para>The upstreams <acronym>BTS</acronym> can be found
-      at <ulink url="http://bugzilla.foo.tld"/>.</para>
-  </refsect1>
-  <refsect1 id="see_also">
-    <title>SEE ALSO</title>
-    <!-- In alpabetical order. -->
-    <para><citerefentry>
-        <refentrytitle>bar</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry>, <citerefentry>
-        <refentrytitle>baz</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry>, <citerefentry>
-        <refentrytitle>foo.conf</refentrytitle>
-        <manvolnum>5</manvolnum>
-      </citerefentry></para>
-    <para>The programs are documented fully by <citetitle>The Rise and
-      Fall of a Fooish Bar</citetitle> available via the <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> system.</para>
-  </refsect1>
-</refentry>
-
diff --git a/debian/menu.ex b/debian/menu.ex
deleted file mode 100644
index 4fd6c1d..0000000
--- a/debian/menu.ex
+++ /dev/null
@@ -1,2 +0,0 @@
-?package(x2gognomebindings):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\
-  title="x2gognomebindings" command="/usr/bin/x2gognomebindings"
diff --git a/debian/postinst.ex b/debian/postinst.ex
deleted file mode 100644
index 73c80c9..0000000
--- a/debian/postinst.ex
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-# postinst script for x2gognomebindings
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-
diff --git a/debian/postrm.ex b/debian/postrm.ex
deleted file mode 100644
index 4afd97b..0000000
--- a/debian/postrm.ex
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-# postrm script for x2gognomebindings
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-
diff --git a/debian/preinst.ex b/debian/preinst.ex
deleted file mode 100644
index 9a2c997..0000000
--- a/debian/preinst.ex
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-# preinst script for x2gognomebindings
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <new-preinst> `install'
-#        * <new-preinst> `install' <old-version>
-#        * <new-preinst> `upgrade' <old-version>
-#        * <old-preinst> `abort-upgrade' <new-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    install|upgrade)
-    ;;
-
-    abort-upgrade)
-    ;;
-
-    *)
-        echo "preinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-
diff --git a/debian/prerm.ex b/debian/prerm.ex
deleted file mode 100644
index 4dc2881..0000000
--- a/debian/prerm.ex
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh
-# prerm script for x2gognomebindings
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <prerm> `remove'
-#        * <old-prerm> `upgrade' <new-version>
-#        * <new-prerm> `failed-upgrade' <old-version>
-#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
-#        * <deconfigured's-prerm> `deconfigure' `in-favour'
-#          <package-being-installed> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-
diff --git a/debian/watch.ex b/debian/watch.ex
deleted file mode 100644
index 002e3d6..0000000
--- a/debian/watch.ex
+++ /dev/null
@@ -1,23 +0,0 @@
-# Example watch control file for uscan
-# Rename this file to "watch" and then you can run the "uscan" command
-# to check for upstream updates and more.
-# See uscan(1) for format
-
-# Compulsory line, this is a version 3 file
-version=3
-
-# Uncomment to examine a Webpage
-# <Webpage URL> <string match>
-#http://www.example.com/downloads.php x2gognomebindings-(.*)\.tar\.gz
-
-# Uncomment to examine a Webserver directory
-#http://www.example.com/pub/x2gognomebindings-(.*)\.tar\.gz
-
-# Uncommment to examine a FTP server
-#ftp://ftp.example.com/pub/x2gognomebindings-(.*)\.tar\.gz debian uupdate
-
-# Uncomment to find new files on sourceforge, for devscripts >= 2.9
-# http://sf.net/x2gognomebindings/x2gognomebindings-(.*)\.tar\.gz
-
-# Uncomment to find new files on GooglePages
-# http://example.googlepages.com/foo.html x2gognomebindings-(.*)\.tar\.gz
diff --git a/debian/x2gognomebindings.default.ex b/debian/x2gognomebindings.default.ex
deleted file mode 100644
index e502f2e..0000000
--- a/debian/x2gognomebindings.default.ex
+++ /dev/null
@@ -1,10 +0,0 @@
-# Defaults for x2gognomebindings initscript
-# sourced by /etc/init.d/x2gognomebindings
-# installed at /etc/default/x2gognomebindings by the maintainer scripts
-
-#
-# This is a POSIX shell fragment
-#
-
-# Additional options that are passed to the Daemon.
-DAEMON_OPTS=""
diff --git a/debian/x2gognomebindings.doc-base.EX b/debian/x2gognomebindings.doc-base.EX
deleted file mode 100644
index e9a9402..0000000
--- a/debian/x2gognomebindings.doc-base.EX
+++ /dev/null
@@ -1,22 +0,0 @@
-Document: x2gognomebindings
-Title: Debian x2gognomebindings Manual
-Author: <insert document author here>
-Abstract: This manual describes what x2gognomebindings is
- and how it can be used to
- manage online manuals on Debian systems.
-Section: unknown
-
-Format: debiandoc-sgml
-Files: /usr/share/doc/x2gognomebindings/x2gognomebindings.sgml.gz
-
-Format: postscript
-Files: /usr/share/doc/x2gognomebindings/x2gognomebindings.ps.gz
-
-Format: text
-Files: /usr/share/doc/x2gognomebindings/x2gognomebindings.text.gz
-
-Format: HTML
-Index: /usr/share/doc/x2gognomebindings/html/index.html
-Files: /usr/share/doc/x2gognomebindings/html/*.html
-
-
diff --git a/po/Makefile b/po/Makefile
index 7e0acb2..5e1f8ef 100644
--- a/po/Makefile
+++ b/po/Makefile
@@ -36,7 +36,7 @@ libdir = ${exec_prefix}/lib
 DATADIRNAME = share
 itlocaledir = $(prefix)/$(DATADIRNAME)/locale
 subdir = po
-install_sh = $(SHELL) /usr/src.cur/db-builds/x2gognomebindings/x2gognomebindings-2.0.1/install-sh
+install_sh = $(SHELL) /tmp/morty/x2go/x2gognomebindings/install-sh
 # Automake >= 1.8 provides /bin/mkdir -p.
 # Until it can be supposed, use the safe fallback:
 mkdir_p = $(install_sh) -d
diff --git a/po/Makefile.in b/po/Makefile.in
index 64749c5..d0df55b 100644
--- a/po/Makefile.in
+++ b/po/Makefile.in
@@ -36,7 +36,7 @@ libdir = ${exec_prefix}/lib
 DATADIRNAME = share
 itlocaledir = $(prefix)/$(DATADIRNAME)/locale
 subdir = po
-install_sh = $(SHELL) /usr/src.cur/db-builds/x2gognomebindings/x2gognomebindings-2.0.1/install-sh
+install_sh = $(SHELL) /tmp/morty/x2go/x2gognomebindings/install-sh
 # Automake >= 1.8 provides /bin/mkdir -p.
 # Until it can be supposed, use the safe fallback:
 mkdir_p = $(install_sh) -d


hooks/post-receive
-- 
x2gomatebindings.git (x2gomatebindings upstream project)

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "x2gomatebindings.git" (x2gomatebindings upstream project).




More information about the x2go-commits mailing list