[X2Go-Commits] Build failed in Jenkins: x2goclient+nightly+epel-6 #18

git-admin at x2go.org git-admin at x2go.org
Sun Dec 8 16:09:31 CET 2013 

See <http://jenkins.x2go.org:8080/job/x2goclient+nightly+epel-6/18/changes>

Changes:

[mike.gabriel] Make sure that build_client and build_plugin are not build with parallel make.

------------------------------------------
[...truncated 124 lines...]
+ rm -f '/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/i386/rpmbuild/SOURCES/*'
+ rm -f '/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/i386/rpmbuild/SRPMS/x2goclient-*.src.rpm'
+ rm -f '/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/i386/*.log'
+ rm -f '/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/i386/x2goclient-*.rpm'
+ read line
+ return 0
+ build_packages
+ echo epel:6
+ read line
+ sed -e 's/ /\n/g'
++ echo epel:6
++ cut -d: -f1
++ tr '[:upper:]' '[:lower:]'
+ l_DIST=epel
++ tr '[:upper:]' '[:lower:]'
++ sed -e 's/,/ /g'
++ echo epel:6
++ cut -d: -f2-
+ l_CODENAMES=6
+ grep epel
+ echo 'fedora epel'
+ for l_CODENAME in '$l_CODENAMES'
+ test -z
+ mkdir -p /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild/SOURCES
++ mktemp -d --tmpdir=/var/lib/jenkins/tmp/
+ TEMP_DIR=/var/lib/jenkins/tmp/tmp.xwvLP3Rnv4
+ mkdir -p /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient
+ chmod 2770 /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4 -Rf
+ cd /var/lib/jenkins/build/heuler/x2goclient
+ git clone --local /var/lib/jenkins/build/heuler/x2goclient /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient/
Cloning into '/var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient'...
done.
+ cd /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4
++ cd x2goclient
++ gitrevno
++ cd -
+ GITREV=476
+ rm -Rf x2goclient/.git
+ mv x2goclient/x2goclient.spec .
++ cat x2goclient.spec
++ egrep '^Version:.*'
++ awk '{ print $2 }'
+ UPSTREAM_VERSION=4.0.1.2
++ awk '{ print $2 }'
++ egrep '^Release:.*'
++ cat x2goclient.spec
+ PKG_RELEASE='0.0x2go1%{?dist}'
++ sed -e 's/%{?dist}//'
++ echo '0.0x2go1%{?dist}'
+ PKG_SRCRELEASE=0.0x2go1
++ egrep '^BuildArch:.*noarch$'
++ cat x2goclient.spec
++ echo no
+ IS_NOARCH=no
+ '[' heuler = heuler ']'
+ IS_RELEASE=0
+ sed -i x2goclient.spec -e 's/%{?dist}/.0.git20131208.476.heuler%{?dist}/'
+ '[' -f x2goclient/debian/patches/series ']'
+ egrep '^Source[1-9]+:.*'
+ cat x2goclient.spec
+ awk '{ print $2 }'
+ read source_file
+ mv /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient-4.0.1.2
+ tar -czf /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild/SOURCES/x2goclient-4.0.1.2.tar.gz x2goclient-4.0.1.2
+ rpmbuild -D '%_topdir /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild' -bs x2goclient.spec
Wrote: /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/rpmbuild/SRPMS/x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
+ cd
+ rm /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4/x2goclient -Rf
+ mkdir -p /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/x86_64 /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/i386
+ '[' x '!=' xx86_64 ']'
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ echo 'Waiting for some other build to finish...'
Waiting for some other build to finish...
+ sleep 30
+ '[' -d /var/lib/mock/epel-6-x86_64 ']'
+ mock -r epel-6-x86_64 --result /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/x86_64 /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild/SRPMS/x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
INFO: mock.py version 1.1.33 starting...
Start: init plugins
INFO: selinux disabled
Finish: init plugins
Start: run
INFO: Start(/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild/SRPMS/x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm)  Config(epel-6-x86_64)
Start: lock buildroot
Start: clean chroot
Finish: clean chroot
Finish: lock buildroot
Start: chroot init
Start: lock buildroot
Mock Version: 1.1.33
INFO: Mock Version: 1.1.33
INFO: calling preinit hooks
INFO: enabled root cache
Start: unpacking root cache
Finish: unpacking root cache
INFO: enabled yum cache
Start: cleaning yum metadata
Finish: cleaning yum metadata
INFO: enabled ccache
Start: device setup
Finish: device setup
Start: yum update
Start: Outputting list of available packages
Finish: Outputting list of available packages
Finish: yum update
Finish: lock buildroot
Finish: chroot init
INFO: Installed packages:
Start: build phase for x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
Start: device setup
Finish: device setup
Start: build setup for x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
Finish: build setup for x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
Start: rpmbuild -bb x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm
Start: Outputting list of installed packages
Finish: Outputting list of installed packages
ERROR: Exception(/var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6//rpmbuild/SRPMS/x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.src.rpm) Config(epel-6-x86_64) 16 minutes 29 seconds
INFO: Results and/or logs in: /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/x86_64
INFO: Cleaning up build root ('clean_on_failure=True')
Start: lock buildroot
Start: clean chroot
INFO: chroot (/var/lib/mock/epel-6-x86_64) unlocked and deleted
Finish: clean chroot
Finish: lock buildroot
ERROR: Command failed. See logs for output.
 # ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec']
+ cat /var/lib/jenkins/pkg-dist/heuler/x2goclient/epel/6/x86_64/build.log
Mock Version: 1.1.33
ENTER do(['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec'], False, '/var/lib/mock/epel-6-x86_64/root/', None, 0, True, False, 119, 133, None, False, {'LANG': 'en_GB.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'CCACHE_DIR': '/tmp/ccache', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'CCACHE_UMASK': '002'}, logger=<mockbuild.trace_decorator.getLog object at 0x1bd3cd0>)
Executing command: ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec'] with env {'LANG': 'en_GB.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'CCACHE_DIR': '/tmp/ccache', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'CCACHE_UMASK': '002'}
Building target platforms: x86_64
Building for target x86_64
Wrote: /builddir/build/SRPMS/x2goclient-4.0.1.2-0.0x2go1.0.git20131208.476.heuler.el6.src.rpm
Child return code was: 0
LEAVE do --> 

ENTER do(['bash', '--login', '-c', 'rpmbuild -bb --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec'], False, '/var/lib/mock/epel-6-x86_64/root/', None, 0, True, False, 119, 133, None, False, {'LANG': 'en_GB.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'CCACHE_DIR': '/tmp/ccache', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'CCACHE_UMASK': '002'}, logger=<mockbuild.trace_decorator.getLog object at 0x1bd3cd0>)
Executing command: ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec'] with env {'LANG': 'en_GB.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'CCACHE_DIR': '/tmp/ccache', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'CCACHE_UMASK': '002'}
Building target platforms: x86_64
Building for target x86_64
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.LrX8Dd
+ umask 022
+ cd /builddir/build/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /builddir/build/BUILD
+ rm -rf x2goclient-4.0.1.2
+ /usr/bin/gzip -dc /builddir/build/SOURCES/x2goclient-4.0.1.2.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd x2goclient-4.0.1.2
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ sed -i -e 's/-o root -g root//' Makefile
+ sed -i -e '/^MOZPLUGDIR=/s/lib/lib64/' Makefile
+ sed -i -e /CFGPLUGIN/aTEMPLATE=lib x2goclient.pro
+ sed -i -e '/^LIBS /s/$/ -ldl/' x2goclient.pro
+ sed -i -e 's/include.*qtbrowserplugin.pri)/LIBS += -lqtbrowserplugin/' x2goclient.pro
+ rm -r qtbrowserplugin-2.4_1-opensource
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.00D00Y
+ umask 022
+ cd /builddir/build/BUILD
+ cd x2goclient-4.0.1.2
+ LANG=C
+ export LANG
+ unset DISPLAY
+ export PATH=/usr/lib64/qt4/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin:/builddir/bin
+ PATH=/usr/lib64/qt4/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin:/builddir/bin
+ make -j8
make -f Makefile.man2html build
make[1]: Entering directory `/builddir/build/BUILD/x2goclient-4.0.1.2'
mkdir -p .build_man2html/html
for man_page in `cd man && find * -type f`; do mkdir -p `dirname .build_man2html/html/$man_page`; done
for man_page in `cd man && find * -type f`; do man2html man/$man_page > .build_man2html/html/$man_page.html; done
make[1]: Leaving directory `/builddir/build/BUILD/x2goclient-4.0.1.2'
make build_client
make[1]: Entering directory `/builddir/build/BUILD/x2goclient-4.0.1.2'
/usr/bin/lrelease x2goclient.pro
/bin/bash: /usr/bin/lrelease: No such file or directory
make[1]: *** [build_client] Error 127
make[1]: Leaving directory `/builddir/build/BUILD/x2goclient-4.0.1.2'
make: *** [build] Error 2
RPM build errors:
error: Bad exit status from /var/tmp/rpm-tmp.00D00Y (%build)
    Bad exit status from /var/tmp/rpm-tmp.00D00Y (%build)
Child return code was: 1
EXCEPTION: Command failed. See logs for output.
 # ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec']
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/mockbuild/trace_decorator.py", line 70, in trace
    result = func(*args, **kw)
  File "/usr/lib/python2.7/dist-packages/mockbuild/util.py", line 361, in do
    raise mockbuild.exception.Error, ("Command failed. See logs for output.\n # %s" % (command,), child.returncode)
Error: Command failed. See logs for output.
 # ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64 --nodeps builddir/build/SPECS/x2goclient.spec']
LEAVE do --> EXCEPTION RAISED

+ rm -Rf /var/lib/jenkins/tmp/tmp.xwvLP3Rnv4
+ exit -1
Build step 'Execute shell' marked build as failure

More information about the x2go-commits mailing list