On points: At me on the xfce server
Sound: The sound earned. audioout=list helped to see the correct name of the alsa_card.pci-0000_00_1b.0|output:analog-stereo sound card But a sound every time of mute. It is necessary to include it.
Usb disks: I tried 3 usb flash drive. On all there is a file system and they are workers. Did everything in the console of the thin client (ctrl alt f1 user/live)
mount | tee mountbefore then insert the USB flash drive mount | tee mountafter diff mountbefore mountafter Output blank line (there is no difference between files)
At the same time at connection of usb it is displayed nothing in the console. Only at connection of one device in the console appears sd 6:0:0:0 [sda] No Caching mode page found sd 6:0:0:0 [sda] Assuming drive cache: write through
If in the console of the thin client to execute udevadm monitor - property
- kernel - udev, then at connection of any flash drive outputs a lot of information on the attached device (model, serial number, vendor and many other things)
-- С Уважением Строганов Роман
Hi Roman!
Am 17.01.19 um 14:08 schrieb Stroganov Roman:
On points: At me on the xfce server
Sound: The sound earned. audioout=list helped to see the correct name of the alsa_card.pci-0000_00_1b.0|output:analog-stereo sound card But a sound every time of mute. It is necessary to include it.
Okay. So you will have to include the proper audioout boot parameter for your devices. If you need different settings for different manufacturers, you can try to tell them apart by MAC address and set separate pxe boot configuration files for them.
To un-mute, you probably need to create a script on the server that raises the volume/toggles the mute setting upon user login.
Usb disks: I tried 3 usb flash drive. On all there is a file system and they are workers. Did everything in the console of the thin client (ctrl alt f1 user/live)
mount | tee mountbefore then insert the USB flash drive mount | tee mountafter diff mountbefore mountafter Output blank line (there is no difference between files)
At the same time at connection of usb it is displayed nothing in the console. Only at connection of one device in the console appears sd 6:0:0:0 [sda] No Caching mode page found sd 6:0:0:0 [sda] Assuming drive cache: write through
If in the console of the thin client to execute udevadm monitor - property
- kernel - udev, then at connection of any flash drive outputs a lot of information on the attached device (model, serial number, vendor and many other things)
Okay then, please repeat the same commands, but this time as root on the thinclient.
mount | tee mountbefore
then insert the USB flash drive, wait a moment, then run
mount | tee mountafter
diff mountbefore mountafter
If we get a result there, then it means mounting works properly on the client side, and we need to investigate why it isn't passed along to the server. If not, we need to investigate why the automounter on the client isn't working.
Kind Regards, Stefan Baur
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
-
Stefan Baur -
Stroganov Roman