My e-mails regarding x2go on salix have not gotten any response to date,but on the off chance someone is following here is some more data.
I tried to connect using PyHoca-GUI and it says authentication failedfor all servers and users I tried, even ones that the regular x2goclient works fine with.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- Eskimo North Linux Friendly Internet Access, Shell Accounts, and Hosting. Knowledgeable human assistance, not telephone trees or script readers. See our web site: http://www.eskimo.com/ (206) 812-0051 or (800) 246-6874.
Hi,
On Do 21 Mär 2019 09:02:29 CET, Robert Dinse wrote:
My e-mails regarding x2go on salix have not gotten any response to date, but on the off chance someone is following here is some more data.
I tried to connect using PyHoca-GUI and it says authentication failedfor all servers and users I tried, even ones that the regular
x2goclient works fine with.
Depending on the SSH server version and the PyHoca-GUI version (rather
the python-paramiko version) you might run into problems regarding the
host key types.
Old version of Paramiko supported only RSA + DSA for a long time. If
you connect to SSH to a modern server and accept the ecdsa hostkey, it
might happen that you cannot connect with paramiko anymore.
(I can't remember the exact details, but I have been there before...).
You could try to hack some Python Paramiko script together and check,
if you can SSH into the X2GoServer using Paramiko, at all:
https://github.com/paramiko/paramiko/tree/master/demos
If that works, then we can start looking into Python X2Go itself.
Mike
DAS-NETZWERKTEAM c\o Technik- und Ökologiezentrum Eckernförde Mike Gabriel, Marienthaler str. 17, 24340 Eckernförde mobile: +49 (1520) 1976 148 landline: +49 (4354) 8390 139
GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
To be clear I can not connect using either PyHoca or x2goclient. Ithangs at "connecting", it does not give an error message. On the server side the only x2goprocess that runs is x2goagent. When I first installed, it would error complaining about some missing perl modules, but now that I have installed those it does not error, it just sits at connecting forever.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- Eskimo North Linux Friendly Internet Access, Shell Accounts, and Hosting. Knowledgeable human assistance, not telephone trees or script readers. See our web site: http://www.eskimo.com/ (206) 812-0051 or (800) 246-6874.
On Fri, 22 Mar 2019, Mike Gabriel wrote:
Date: Fri, 22 Mar 2019 11:54:00 +0000 From: Mike Gabriel <mike.gabriel@das-netzwerkteam.de> To: Robert Dinse <nanook@eskimo.com> Cc: x2go-user@lists.x2go.org Subject: Re: [X2Go-User] x2goserver on salix
Hi,
On Do 21 Mär 2019 09:02:29 CET, Robert Dinse wrote:
My e-mails regarding x2go on salix have not gotten any response to date, but on the off chance someone is following here is some more data.
I tried to connect using PyHoca-GUI and it says authentication failedfor all servers and users I tried, even ones that the regular x2goclient works fine with.
Depending on the SSH server version and the PyHoca-GUI version (rather the python-paramiko version) you might run into problems regarding the host key types.
Old version of Paramiko supported only RSA + DSA for a long time. If you connect to SSH to a modern server and accept the ecdsa hostkey, it might happen that you cannot connect with paramiko anymore.
(I can't remember the exact details, but I have been there before...).
You could try to hack some Python Paramiko script together and check, if you can SSH into the X2GoServer using Paramiko, at all: https://github.com/paramiko/paramiko/tree/master/demos
If that works, then we can start looking into Python X2Go itself.
Mike
DAS-NETZWERKTEAM c\o Technik- und Ökologiezentrum Eckernförde Mike Gabriel, Marienthaler str. 17, 24340 Eckernförde mobile: +49 (1520) 1976 148 landline: +49 (4354) 8390 139
GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
It also fails with x2goserver. In both cases, after authentication,it hangs indefinitely.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- Eskimo North Linux Friendly Internet Access, Shell Accounts, and Hosting. Knowledgeable human assistance, not telephone trees or script readers. See our web site: http://www.eskimo.com/ (206) 812-0051 or (800) 246-6874.
On Fri, 22 Mar 2019, Mike Gabriel wrote:
Date: Fri, 22 Mar 2019 11:54:00 +0000 From: Mike Gabriel <mike.gabriel@das-netzwerkteam.de> To: Robert Dinse <nanook@eskimo.com> Cc: x2go-user@lists.x2go.org Subject: Re: [X2Go-User] x2goserver on salix
Hi,
On Do 21 Mär 2019 09:02:29 CET, Robert Dinse wrote:
My e-mails regarding x2go on salix have not gotten any response to date, but on the off chance someone is following here is some more data.
I tried to connect using PyHoca-GUI and it says authentication failedfor all servers and users I tried, even ones that the regular x2goclient works fine with.
Depending on the SSH server version and the PyHoca-GUI version (rather the python-paramiko version) you might run into problems regarding the host key types.
Old version of Paramiko supported only RSA + DSA for a long time. If you connect to SSH to a modern server and accept the ecdsa hostkey, it might happen that you cannot connect with paramiko anymore.
(I can't remember the exact details, but I have been there before...).
You could try to hack some Python Paramiko script together and check, if you can SSH into the X2GoServer using Paramiko, at all: https://github.com/paramiko/paramiko/tree/master/demos
If that works, then we can start looking into Python X2Go itself.
Mike
DAS-NETZWERKTEAM c\o Technik- und Ökologiezentrum Eckernförde Mike Gabriel, Marienthaler str. 17, 24340 Eckernförde mobile: +49 (1520) 1976 148 landline: +49 (4354) 8390 139
GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
-
Mike Gabriel -
Robert Dinse