Hi Franck,
On Di 02 Jun 2015 11:30:16 CEST, BOTZ Franck (Administrateur Systèmes
et Réseaux) - DDT 67/SIDSIC/Pôle Infra wrote:
- broker
- x2gobroker-sessionprofiles.conf
- host=HostName of the server (if I use IP the resume function
did not work)
You can also use
host=HostName (IP-Address)
e.g.
host=server2 (192.168.2.52)
For load balancing
host=server1 (192.168.2.51), server2 (192.168.2.52)
If your DNS system is whacky or DNS is different from /etc/hostname
(e.g., people connect via a gateway), then you can do this:
host=server1 (gateway.company:22051), server2 (gateway.company:22052)
Where server1 and server2 are the actual hostnames of the X2Go Servers
and the host address in parentheses (gateway.company:<port>) is the
host address under which the X2Go Servers can be contacted by the
client.
Greets, Mike
--
DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148
GnuPG Key ID 0x25771B31 mail: mike.gabriel@das-netzwerkteam.de, http://das-netzwerkteam.de
freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xf...