Hi John,
Well it seems to be a problem with the client installation. On my client (WinXP SP3) the balance for "wav" was set to 100% left. I just did an installation (x2goclient-3.99.0.5-setup.exe) on a second client (also WinXP SP3) with the same result. Before installation all levers were in the middle position. After installing the client software the lever for wav (only this one) was set to left. If you move the lever back to the middle everything works in stereo so far but this seems to be a caveat. There is still no sound during login but I can live with that.
Now I have the next problem. I tested with watching videos on youtube. At first everything works fine but after approx. five minutes sound stops working. If you select another video flash seems to wait for something. If you try to exit/close firefox you have to wait some seconds. Do you have any suggestions what may cause this? With a local login everything works for at last ten minutes so I assume it is no problem with the server.
Regards Frank
Von: John A. Sullivan III <jsullivan@opensourcedevel.com> An: Frank Schlingmann <franklins_email@yahoo.de> Cc: "x2go-user@lists.berlios.de" <x2go-user@lists.berlios.de> Gesendet: 17:37 Montag, 23.Januar 2012 Betreff: Re: [X2go-User] Sound issues in new release
Hi, Frank.
On Sat, 2012-01-21 at 18:53 +0000, Frank Schlingmann wrote:
Dear all,
I hope this is the right place for my problem as I have started with x2go only e few weeks ago and could not find many resources. I did a test two weeks ago and sound was working well. Now I made a new installation and encountered two problems compared to my last installation:
- when I login remotely there is now start-sound Did you mean there is no start sound or that there now is start sound?
- when I use flash (e.g. browser) I can only hear sound in the left speaker.
My client is a WinXP and the server is running ubuntu 11.10 in a virtual box. In my first test (two weeks ago) I heard the start-sound when I logged in remotely. I am not quite sure about stereo but I think both channels worked also. Now I made a fresh install of x2go on the server today and faced the problems mentioned above. I made an upgrade on the client from 3.99.0.3 to 3.99.0.4 with no changes, the problems persist. Did I miss something?
<snip> The stereo issues is strange and I can't imagine how that is X2Go related. Do you have the same "mono" problem with other applications, e.g., playing the same video in VLC or mplayer? If so, it may be a pulseaudio configuration issue. If not, it may be a flash/browser configuration issue - John