x2go-user

x2go-user@lists.x2go.org

2315 discussions

Two upcoming X2Go and orca e.V. sponsorship drives - first one this Monday, 2023-03-20!
by Stefan Baur 19 Mar '23

19 Mar '23

Dear $ALL, As you might know, a few years ago, at "X2Go: The Gathering 2017", several key members of X2Go as well as members from other Remote Desktop-/Remote Application projects joined together to form the Open Remote Computing Association - orca e.V. - a registered association under Germanys Civil Code and also registered as a charitable organization, similar to a 501(c)(3) organization in the US. In June 2022, we joined betterplace.org for easier handling of donations. They offer PayPal, SEPA Direct Debit, Credit Card, giropay/paydirekt and Wire transfer. And they also handle issuing donation receipts for us. (Note that while donations towards orca/X2Go are tax-deductible for German tax subjects, this may vary in other jurisdictions.) On Monday, 2023-03-20 (tomorrow!), all single (non-recurring) donations up to an amount of 200 Euro will receive 20% on top directly from betterplace.org. Donations above 200 Euro will receive 40 Euro on top from betterplace.org. The donation pool is limited to 15 000 EUR and will be used up on a first-come, first-served basis. So please try to donate early in the day. The second sponsorship drive starts Tuesday, 2023-04-04, 09:00 CEST and ends Thursday, 2023-04-06, 23:59 CEST. This one is sponsored by the Commercial and Savings Bank Ulm, where orca's bank account resides, and they are going to distribute 10 000 EUR among all charitable organizations registered with them via betterplace.org that receive donations in the timeframe above. So it's not a 1:1 matching of each donation, but the org with the biggest amount of donations gets the biggest piece of the cake, so to speak. If you can, please visit the donation sites below on one or more of the dates mentioned and send a few €€€ our way. (But don't feel bad if you can't. Times are rough. We get that.) We'd prefer if you use the German-language donation forms because with these, we know for sure that the donation counts towards the bank's pledge. However, if you're afraid of hitting the wrong button in a German-language form, feel free to use the link that points to the English version. To donate towards X2Go: German: <https://www.wirwunder.de/projects/111056?wirwunder=235> English: <https://www.betterplace.org/en/projects/111056?wirwunder=235> Note that X2Go currently has two specific needs (with a third one probably popping up soon). To donate specifically towards one of those needs, please see the links below: English-language donation form for travel/lodging/supplies costs @ LinuxDays Chemnitz 2023: <https://www.betterplace.org/en/donate/platform/projects/111056?need_id=4715…> German-language donation form for travel/lodging/supplies costs @ LinuxDays Chemnitz 2023: <https://www.betterplace.org/de/donate/platform/projects/111056?need_id=4715…> English-language donation form for Webserver/Webhosting Costs: <https://www.betterplace.org/en/donate/platform/projects/111056?need_id=4120…> German-language donation form for Webserver/Webhosting Costs: <https://www.betterplace.org/de/donate/platform/projects/111056?need_id=4120…> To donate towards orca e.V., our umbrella org: German: <https://www.wirwunder.de/projects/111057?wirwunder=235> English: <https://www.betterplace.org/en/projects/111057?wirwunder=235> Kind Regards, and Thanks in Advance, Stefan Baur X2Go's Community Manager -- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243

1 0

Resume/restoration of windows to linux workspaces
by webman＠manfbraun.de 17 Mar '23

17 Mar '23

Hello! I am using published applications to run firefox. I am on debian bullseye (client and server). There is a big behavioral difference from using fox between this and using fox local in regard of crash and restore. If the fox restores a crashed window set locally, all windows appear on the workspace, they were originally running on. Not so with x2go - they all appear in the workspace, were the restauration starts. I usually have >50 windows and this is a big pain. Is this the normal behavior? If not, where to look for the problem? Note, this does not depend on a users profile. I created an additional user on the server and it behaves the same. Thanks, Manfred

2 1

socket bind error with Windows client
by Hanno Foest 15 Mar '23

15 Mar '23

Hello, randomly (about one in three attempts) when I try to connect to one of my x2go sessions, it doesn't work and I'm getting the error Can't create SSH tunnel for the start of the X2GO Session (NX): socket bind error localhost:57030 (translated from German, hope it's correct). netstat doesn't seem to list the port as being in use. So far I didn't find any other way to recover the situation other than rebooting, which is a bit of a hassle sometimes. Client is "X2GoClient V. 4.1.2.2 (Qt - 4.8.6)" Curiously, the second x2go session I use to seems to connect without issues all the time. In case it matters: The machine is connected using OpnnVPN. Turning off antivirus didn't make a difference. Any ideas? - Hanno

2 5

Can't get X2Go connection opened, with error PANIC! The remote NX proxy closed the connection.
by Kalle Tuulos 10 Mar '23

10 Mar '23

In short: X2Goserver is hosted in Ubuntu 22.04 computer. It is being accessed from Ubuntu 20.04 and Windows 11. Previously, everything worked well, but today morning, I could not any more get connection to this computer, not from Ubuntu or from Windows 11. On the Windows client error message is: "The remote proxy closed the connection while negotiating..." On Ubuntu client, x2goclient --debug print shows: --8<--8<-- RESUMING SESSION is KDRIVE: false x2go-DEBUG-../src/onmainwindow.cpp:6142> "Starting NX proxy, command: nxproxy -S nx/nx,options=/home/kalle/.x2go/S-ktuulos-50-1678441073_stDLXDE_dp24/options:50" x2go-DEBUG-../src/sshprocess.cpp:157> Direct tunnel: waiting for connections on "localhost":34744 x2go-DEBUG-../src/onmainwindow.cpp:6618> Proxy wrote on stderr: "\nNXPROXY - Version 3.5.99.23\n\nCopyright (c) 2001, 2011 NoMachine ( http://www.nomachine.com)\nCopyright (c) 2008-2014 Oleksandr Shneyder < o.shneyder(a)phoca-gmbh.de>\nCopyright (c) 2014-2016 Ulrich Sibiller < uli42(a)gmx.de>\nCopyright (c) 2014-2016 Mihai Moldovan <ionic(a)ionic.de>\nCopyright (c) 2011-2016 Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de>\nCopyright (c) 2015-2016 Qindel Group (http://www.qindel.com)\n\nNXCOMP, NX protocol compression and NX extensions to this software\nare copyright of the aforementioned persons and companies.\n\nRedistribution and use of the present software is allowed according\nto terms specified in the file LICENSE.nxcomp which comes in the\nsource distribution.\n\nAll rights reserved.\n\nNOTE: This software has received contributions from various other\ncontributors, only the core maintainers and supporters are listed as\ncopyright holders. Please contact us, if you feel you should be listed\nas copyright holder, as well.\n\nNX protocol compression is derived from DXPC project.\n\nCopyright (c) 1995,1996 Brian Pane\nCopyright (c) 1996,1997 Zachary Vonler and Brian Pane\nCopyright (c) 1999 Kevin Vigor and Brian Pane\nCopyright (c) 2000,2003 Gian Filippo Pinzari and Brian Pane\n\nAll rights reserved.\n\nSee https://github.com/ArcticaProject/nx-libs for more information.\n\nInfo: Proxy running in server mode with pid '2505200'.\nSession: Starting session at 'Fri Mar 10 11:37:54 2023'.\nInfo: Using errors file '/home/kalle/.x2go/S-ktuulos-50-1678441073_stDLXDE_dp24/sessions'.\nInfo: Using stats file '/home/kalle/.x2go/S-50/stats'.\nLoop: WARNING! Overriding auxiliary X11 port with new value '1'.\nWarning: Overriding auxiliary X11 port with new value '1'.\nInfo: Using abstract X11 socket in kernel namespace for accessing DISPLAY=:50.\nInfo: Connecting to remote host 'localhost:34744'.\nInfo: Connected to remote proxy on FD#5.\n" x2go-DEBUG-../src/sshprocess.cpp:109> New TCP connection. x2go-DEBUG-../src/sshprocess.cpp:114> New socket: 14 x2go-DEBUG-../src/sshmasterconnection.cpp:1977> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:1990> New channel:0x7f41a4012000 x2go-DEBUG-../src/sshmasterconnection.cpp:1994> Forwarding parameters: from remote ("localhost":33744) to local ("localhost":33758) x2go-DEBUG-../src/sshmasterconnection.cpp:2028> Temporary session port after config file parse: 33744 x2go-DEBUG-../src/sshmasterconnection.cpp:2032> Temporary session host after config file parse: localhost x2go-DEBUG-../src/sshmasterconnection.cpp:2059> New channel forwarded. .... x2go-DEBUG-../src/sshmasterconnection.cpp:2121> EOF on channel 0x7f41a4012000; SshProcess object: 2 x2go-DEBUG-../src/sshmasterconnection.cpp:2222> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2224> Channel closed. x2go-DEBUG-../src/onmainwindow.cpp:6618> Proxy wrote on stderr: "Loop: PANIC! The remote NX proxy closed the connection.\nError: The remote NX proxy closed the connection.\nLoop: PANIC! Failure negotiating the session in stage '7'.\nError: Failure negotiating the session in stage '7'.\nLoop: PANIC! Wrong version or invalid session authentication cookie.\nError: Wrong version or invalid session authentication cookie.\nSession: Terminating session at 'Fri Mar 10 11:37:59 2023'.\nSession: Session terminated at 'Fri Mar 10 11:37:59 2023'.\nqt.qpa.xcb: X server does not support XInput 2\n" x2go-DEBUG-../src/onmainwindow.cpp:6475> Deleting Proxy. x2go-DEBUG-../src/onmainwindow.cpp:6520> Waiting for proxy to exit. x2go-DEBUG-../src/onmainwindow.cpp:6544> Checking exit status. x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 3: "x2gocmdexitmessage ktuulos-50-1678441073_stDLXDE_dp24" --8<--8<-- Printing, audio and shared folder have previously been activated and they have worked. Now I have disabled them and it does not make any difference. I have tried to re-install x2go server by command: sudo apt-get install --reinstall x2goserver x2goserver-common x2goserver-xsession On the server computer, .xsession-x2go-<client>-errors file has following: --8<--8<-- XSession-x2go: X session started for ktuulos at pe 10.3.2023 11.30.25 +0200 dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus dbus-update-activation-environment: setting DISPLAY=:50 dbus-update-activation-environment: setting XAUTHORITY=/home/ktuulos/.Xauthority xrdb: Connection reset by peer xrdb: Can't open display ':50' /etc/x2go/Xsession.d/30x11-common_xresources: line 16: has_option: command not found xhost: unable to open display ":50" /etc/x2go/Xsession.d/75dbus_dbus-launch: line 9: has_option: command not found dbus-update-activation-environment: setting QT_ACCESSIBILITY=1 /etc/x2go/Xsession.d/90x11-common_ssh-agent: line 9: has_option: command not found dbus-update-activation-environment: setting SHELL=/bin/bash --8<--8<-- X2goserver host information: ktuulos@kallep50:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy ktuulos@kallep50:~$ dpkg -l x2go* openssh-server Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-=====================-===============-============-=================================== ii openssh-server 1:8.9p1-3ubuntu0.1 amd64 secure shell (SSH) server, for secure access from remote machines un x2goagent <none> <none> (no description available) ii x2goclient 4.1.2.2-2build1 amd64 X2Go Client application (Qt5) un x2goclient-gtk <none> <none> (no description available) un x2godesktopsharing <none> <none> (no description available) un x2goprint <none> <none> (no description available) ii x2goserver 4.1.0.3-5 amd64 X2Go Server ii x2goserver-common 4.1.0.3-5 all X2Go Server (common files) un x2goserver-compat <none> <none> (no description available) ii x2goserver-extensions 4.1.0.3-5 all X2Go Server (extension support) ii x2goserver-fmbindings 4.1.0.3-5 all X2Go Server (file manager bindings) un x2goserver-home <none> <none> (no description available) un x2goserver-one <none> <none> (no description available) ii x2goserver-printing 4.1.0.3-5 all X2Go Server (printing support) un x2goserver-pyhoca <none> <none> (no description available) ii x2goserver-x2goagent 4.1.0.3-5 amd64 X2Go Server's X2Go Agent ii x2goserver-xsession 4.1.0.3-5 all X2Go Server (Xsession runner) On the Ubuntu 20.04 version, x2go package versions are the same, but openssh-server is version 1:8.2. Could someone please instruct how to get this working? This Ubuntu 22.04 is my R&D work computer and I don't have a keyboard or monitor attached to it at all, so now I can only use it through the SSH terminal, which makes desktop operations pretty difficult. :( BR Kalle

3 8

X2Go Booth at Chemnitzer LinuxTage 2023 - This Weekend!
by Stefan Baur 10 Mar '23

10 Mar '23

Hi everyone! LinuxDays Chemnitz are taking place as a real-life event this Sat/Sun, and we'd love to see you there! We have secured both a booth for X2Go, as well as a handful of volunteers to staff it. If you want to support X2Go and our volunteers, you can chip in and help cover their costs for travel/lodging/supplies: <https://www.betterplace.org/en/donate/platform/projects/111056?need_id=4715…> - roughly 700 Euros should cover everything that's needed. Kind Regards, Stefan Baur X2Go's Event Planner -- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243

1 0

Force using IPv6 in x2goclient
by Kalle Tuulos 26 Feb '23

26 Feb '23

Hello I'm connecting to some hosts behind NAT. These hosts are using dynv6 DNS so I'm able to SSH directly to them, if I instruct SSH to use only IPv6, not IPv4. How can I instruct the X2Go client to use only IPv6 when connecting to some host? Thanks and best regards, Kalle

1 0

Copy/paste from client not working
by Michael Eager 23 Feb '23

23 Feb '23

I'm connecting to a Fedora 37 server running KDE Plasma from a Fedora 33 KDE system. The version of X2Go installed on the server is 4.1.0.3. The version on the client 4.1.2.2. I'm connecting using the X2Goclient and bidirectional clipboard is enabled. I can copy from the server and paste on the client, but the reverse, from client to server, does not work. Suggestions? -- Michael Eager eager(a)eagerm.com 1960 Park Blvd., Palo Alto, CA 94306

2 2

xrandr settings - how do you handle this?
by Neal Becker 16 Feb '23

16 Feb '23

Do you connect to a running x2go session using screens with different resolutions? Let's say I started an x2go session (xfce) from my laptop, which happens to be 1920x1600. Later I connect to that same session, this time using a monitor with say 3840x2160. Now I need to resize everything. Going the other way is even worse. How do you handle this? Thanks, Neal

4 6

strange display issue with SDL apps
by Hanno Foest 16 Feb '23

16 Feb '23

Hi, I was running sz81, a ZX81 emulator using SDL, remotely with an IRC client and noticed, that while it worked nicely if started in a session using an x2go Linux client, after disconnecting the session and reconnecting using a Windows client, the application window came up garbled with display artifacts. What's more, if I disconnect and reconnect the session using a Linux client, it somehow manages to blank my complete local display as soon as the SDL application window gets focus. This confused the hell out of me, and I first suspected a crash, until I figured out what was going on. It's really an SDL issue, I verified by running parallax-4.tar.gz from http://olofson.net/examples.html which displayed the same behaviour. I would guess x2go has some kind of SDL passthrough mode which is somewhat buggy and doesn't work with windows. Is that correct, or what is the expected behaviour? - Hanno

2 4

X2Go Black Window Opens Then Closes Instantly Upon Connection
by Joe W 14 Feb '23

14 Feb '23

I set up a new Linux system, initially with Centos 7 and installed X2Go from Epel. When I try to connect, then a black window opens that says X2Go on the background and then closes instantly. I tried from a client on the same machine, from a client on different Linux machines, and from a 4.1.2.0 and 4.1.2.2 clients on WIndows machines. All exhibit the same behavior. I have other Centos 7 machines that I can connect to fine with the same clients. I switched to OS to Rocky Linux 8 for unrelated reasons. I still get the same behavior. I have other Rocky Linux 8 systems that I can connect to without problems. THe rest of this post was obtained using Rocky Linux 8. X2Goserver is v. 4.1.0.3-17.el8.1 I have selected XFCE., disabled Sound and Printing support, as well as SSH port forwarding on Shared Folders tab. I disabled compositing. I stopped the firewall and also setenforce 0 to stop selinux form blocking anything. I tried the following procedure and I can start the XFCE environment without any problems. It does not crash. ----------------------- 1. Instead of starting an x2go session run ssh -X to the server in two terminals 2. in the first ssh connection run "nxagent -ac :55" (55 is the one I use normally, you can use any number here). An empty window should appear 3. in the second ssh session run "xterm -display :55". The empty window will now show you an frameless xterm 4. start the desktop environment by entering "startxfce4" into the xterm. If that doesn't work try startlxde or just run a window manager, e.g. "openbox &" 5. in the desktop environment run your application and try to provoke the "crash" 6. post the end of nxagent's output from the first terminal ------------------------- I ran the Windows debug client and set the server log mode to debug. I include the logs at bottom. I read through posts about similar issues in the last seven years but could not find anything that helped. Any ideas how to debug and fix? ------------------------------------------- Client ------------------------------------------- x2go-INFO-1> "Starting X2Go Client 4.1.2.0..." x2go-WARNING-1> English language requested, not loading translator. x2go-WARNING-1> English language requested, not loading translator. Object::connect: No such slot ONMainWindow::slotCheckAgentProcess() x2go-DEBUG-../src/onmainwindow.cpp:10349> Getting X.Org Server settings. x2go-INFO-3> "Started X2Go Client." x2go-DEBUG-../src/onmainwindow.cpp:563> "$HOME=C:/Users/jsw" x2go-DEBUG-../src/onmainwindow.cpp:2242> Reading 25 sessions from config file. x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: ":/img/icons/128x128/x2gosession.png". x2go-DEBUG-../src/onmainwindow.cpp:12841> libssh not initialized yet. Initializing. x2go-DEBUG-../src/pulsemanager.cpp:369> pulseaudio --version returned:"pulseaudio 7.1 " x2go-DEBUG-../src/onmainwindow.cpp:10252> Starting helper servers for Windows ... x2go-DEBUG-../src/onmainwindow.cpp:10419> "/cygdrive/C/Users/jsw/.x2go/var" cygwin var path x2go-DEBUG-../src/onmainwindow.cpp:10503> "C:/Users/jsw/.x2go/etc/sshd_config created." x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 7022 x2go-DEBUG-../src/onmainwindow.cpp:10854> Logging cygwin sshd to: "C:/Users/jsw/.x2go/sshLogs/p25680.log" x2go-DEBUG-../src/onmainwindow.cpp:10868> Creating desktop: x2go_jsw x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/pulsemanager.cpp:227> pulse started with arguments ("--exit-idle-time=-1", "-n", "-F", "C:\Users\jsw\.x2go\pulse\config.pa", "-p", "C:\Program Files (x86)\x2goclient\pulse\lib\pulse-7.1\modules", "--log-level=debug", "--verbose", "--log-target=file:C:\Users\jsw\.x2go\pulse\pulse.log") - waiting for it to finish... x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 7022 x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 7022 x2go-DEBUG-../src/onmainwindow.cpp:10965> User mode OpenSSH server started successfully. x2go-DEBUG-../src/onmainwindow.cpp:2728> Creating QPixmap with session icon: '":/img/icons/128x128/x2gosession.png"'. x2go-INFO-8> "Starting connection to server: 100.71.110.30:22" x2go-DEBUG-../src/onmainwindow.cpp:2829> Starting new ssh connection to server:"100.71.110.30":"22" krbLogin: false x2go-DEBUG-../src/sshmasterconnection.cpp:175> SshMasterConnection, host "100.71.110.30"; port 22; user "jsw"; useproxy false; proxyserver ""; proxyport 22 x2go-DEBUG-../src/sshmasterconnection.cpp:248> Starting SSH connection without Kerberos authentication. x2go-DEBUG-../src/sshmasterconnection.cpp:252> SshMasterConnection, instance SshMasterConnection(0x3cca590) created. x2go-DEBUG-../src/sshmasterconnection.cpp:520> SshMasterConnection, instance SshMasterConnection(0x3cca590) entering thread. x2go-DEBUG-../src/sshmasterconnection.cpp:592> Setting SSH directory to C:/Users/jsw/ssh x2go-DEBUG-../src/sshmasterconnection.cpp:840> Session port before config file parse: 22 x2go-DEBUG-../src/sshmasterconnection.cpp:850> Session port after config file parse: 22 x2go-DEBUG-../src/sshmasterconnection.cpp:915> Session port before config file parse (part 2): 22 x2go-DEBUG-../src/sshmasterconnection.cpp:925> Session port after config file parse (part 2): 22 x2go-DEBUG-../src/sshmasterconnection.cpp:950> cserverAuth x2go-DEBUG-../src/sshmasterconnection.cpp:991> state: 1 x2go-DEBUG-../src/sshmasterconnection.cpp:711> Setting SSH directory to C:/Users/jsw/ssh x2go-DEBUG-../src/sshmasterconnection.cpp:1274> Trying password mechanism if available. x2go-DEBUG-../src/sshmasterconnection.cpp:1278> Password mechanism available. Continuing. x2go-DEBUG-../src/sshmasterconnection.cpp:726> User authentication OK. x2go-DEBUG-../src/sshmasterconnection.cpp:1789> LOGIN CHECK:"LOGIN OK " x2go-DEBUG-../src/sshmasterconnection.cpp:1792> don't have interaction x2go-DEBUG-../src/sshmasterconnection.cpp:1825> LOOP FINISHED x2go-DEBUG-../src/sshmasterconnection.cpp:1829> No interaction needed, continue session x2go-DEBUG-../src/sshmasterconnection.cpp:735> Login Check - OK x2go-DEBUG-../src/onmainwindow.cpp:2923> SSH connection established. x2go-DEBUG-../src/onmainwindow.cpp:3336> Continue normal X2Go session x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 0: "x2golistsessions" x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096490) Running masterCon->addChannelConnection(this, ' "784cbe15-db23-48ff-8495-01eebf012cd8" ', ' "bash -l -c 'echo "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2golistsessions; echo "X2GODATAEND:784cbe15-db23-48ff-8495-01eebf" '); x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel connection object to channelConnections. x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8c28 x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c 'echo "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2golistsessions; echo "X2GODATAEND:784cbe15-db23-48ff-8495-01eebf012cd8";'" x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d8c28; SshProcess object: 0 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8 X2GODATAEND:784cbe15-db23-48ff-8495-01eebf012cd8 " x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "" (0). x2go-DEBUG-../src/onmainwindow.cpp:3804> "" x2go-DEBUG-../src/onmainwindow.cpp:4215> Fullscreen: false x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 6000 x2go-DEBUG-../src/onmainwindow.cpp:10004> Using internal X.Org Server: true x2go-DEBUG-../src/onmainwindow.cpp:10027> WxH:"1920"x"1200" x2go-DEBUG-../src/onmainwindow.cpp:10032> "-multiwindow -notrayicon -clipboard" x2go-DEBUG-../src/onmainwindow.cpp:10110> Running "C:/Program Files (x86)/x2goclient\vcxsrv\vcxsrv.exe" "-multiwindow -notrayicon -clipboard -nopn -silent-dup-error :0" x2go-DEBUG-../src/onmainwindow.cpp:10111> Trying to start X.Org Server on DISPLAY: 0 x2go-DEBUG-../src/onmainwindow.cpp:4379> Executing remote command: "X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg-9 unix-kde-depth_32 us auto 1 D XFCE both" x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 1: "X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg-9 unix-kde-depth_32 us auto 1 D XFCE both" x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096018) Running masterCon->addChannelConnection(this, ' "5bf99531-2013-47aa-9f1e-7922cbc6fc79" ', ' "bash -l -c 'echo "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg" '); x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel connection object to channelConnections. x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d86a8 x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c 'echo "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg-9 unix-kde-depth_32 us auto 1 D XFCE both; echo "X2GODATAEND:5bf99531-2013-47aa-9f1e-7922cbc6fc79";'" x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 6000 x2go-DEBUG-../src/onmainwindow.cpp:10172> X.Org Server started on DISPLAY 0. x2go-DEBUG-../src/onmainwindow.cpp:10394> All helper servers for Windows are started. x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d86a8; SshProcess object: 1 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79 53 351372de743afab96734733479216401 390553 jsw-53-1676055047_stDXFCE_dp32 45566 45567 45568 X2GODATAEND:5bf99531-2013-47aa-9f1e-7922cbc6fc79 " x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "53 351372de743afab96734733479216401 390553 jsw-53-1676055047_stDXFCE_dp32 45566 45567 45568 " (1). x2go-DEBUG-../src/onmainwindow.cpp:5214> Agent output: "53 351372de743afab96734733479216401 390553 jsw-53-1676055047_stDXFCE_dp32 45566 45567 45568 " x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 46566 x2go-DEBUG-../src/sshprocess.cpp:381> Starting tunnel via SshProcess object 2: "localhost":45566 -> "localhost":46566 x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 6000 x2go-DEBUG-../src/onmainwindow.cpp:5811> "Starting NX proxy, command: nxproxy -S nx/nx,options=/cygdrive/C/Users/jsw/X2GO~1/S-F533~1/options:53" x2go-DEBUG-../src/sshprocess.cpp:157> Direct tunnel: waiting for connections on "localhost":46566 x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: " NXPROXY - Version 3.5.0 Copyright (C) 2001, 2010 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '336'. Session: Starting session at 'Fri Feb 10 13:50:53 2023'. Info: Connecting to remote host 'localhost:46566'. Info: Connection to remote proxy 'localhost:46566' established. " x2go-DEBUG-../src/sshprocess.cpp:109> New TCP connection. x2go-DEBUG-../src/sshprocess.cpp:114> New socket: 2492 x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8a18 x2go-DEBUG-../src/sshmasterconnection.cpp:2106> Forwarding parameters: from remote ("localhost":45566) to local ("localhost":1436) x2go-DEBUG-../src/sshmasterconnection.cpp:2143> Temporary session port after config file parse: 45566 x2go-DEBUG-../src/sshmasterconnection.cpp:2147> Temporary session host after config file parse: localhost x2go-DEBUG-../src/sshmasterconnection.cpp:2177> New channel forwarded. x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: Connection with remote proxy completed. Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Warning: Failed to read data from the X auth command. Warning: Generated a fake cookie for X authentication. Info: Using ADSL link parameters 512/24/1/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found. Info: Forwarding X11 connections to display 'localhost:0'. " x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Session: Session started at 'Fri Feb 10 13:50:54 2023'. " x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: Established X server connection. " x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 3: "x2gobasepath" x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x40961b8) Running masterCon->addChannelConnection(this, ' "0e5b815b-2db6-4a22-97ed-3313c6833127" ', ' "bash -l -c 'echo "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gobasepath; echo "X2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c68331" '); x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel connection object to channelConnections. x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8d30 x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c 'echo "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gobasepath; echo "X2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c6833127";'" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8d30; SshProcess object: 3 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127 /usrX2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c6833127 " x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "/usr" (3). x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 4: "export PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid /usr/bin/x2goruncommand 53 390553 jsw-53-1676055047_stDXFCE_dp32 45567 xfce4-session nosnd D 1> /dev/null 2>/dev/null & exit" x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x40962f0) Running masterCon->addChannelConnection(this, ' "701f62b1-7c0e-4399-8777-90ea5e49b786" ', ' "bash -l -c 'echo "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786"; export TERM="dumb"; export PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid /usr/bin" '); x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel connection object to channelConnections. x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8d30 x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c 'echo "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786"; export TERM="dumb"; export PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid /usr/bin/x2goruncommand 53 390553 jsw-53-1676055047_stDXFCE_dp32 45567 xfce4-session nosnd D 1> /dev/null 2>/dev/null & exit; echo "X2GODATAEND:701f62b1-7c0e-4399-8777-90ea5e49b786";'" x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: Using shared memory parameters 0/0K. " x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8d30; SshProcess object: 4 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786 " x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "" (4). x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8a18; SshProcess object: 2 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: X2GO-jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Error: Failure reading from the peer proxy. Error: Connection with remote peer broken. Error: Please check the state of your network and retry. Session: Terminating session at 'Fri Feb 10 13:51:00 2023'. Session: Session terminated at 'Fri Feb 10 13:51:00 2023'. " QProcess: Destroyed while process is still running. x2go-DEBUG-../src/onmainwindow.cpp:6135> Deleting Proxy. x2go-DEBUG-../src/onmainwindow.cpp:6180> Waiting for proxy to exit. x2go-DEBUG-../src/onmainwindow.cpp:6204> Checking exit status. x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess object 5: "x2gocmdexitmessage jsw-53-1676055047_stDXFCE_dp32" x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096560) Running masterCon->addChannelConnection(this, ' "9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f" ', ' "bash -l -c 'echo "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gocmdexitmessage jsw-53-1676055047_stDXFCE_dp32; echo "X2GODATAE" '); x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel connection object to channelConnections. x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel connection MUTEX. x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. x2go-DEBUG-../src/onmainwindow.cpp:6261> Finished proxy. x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8a18 x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c 'echo "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gocmdexitmessage jsw-53-1676055047_stDXFCE_dp32; echo "X2GODATAEND:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f";'" x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d8a18; SshProcess object: 5 x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f exec xfce4-session Loading profile from /etc/profile X2GODATAEND:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f " x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "exec xfce4-session Loading profile from /etc/profile " (5). x2go-DEBUG-../src/onmainwindow.cpp:9503> "Command message: exec xfce4-session Loading profile from /etc/profile " x2go-DEBUG-../src/sshmasterconnection.cpp:802> SshMasterConnection, instance SshMasterConnection(0x3cca590) waiting for thread to finish. x2go-DEBUG-../src/sshmasterconnection.cpp:2002> Disconnecting ... x2go-DEBUG-../src/sshmasterconnection.cpp:2013> Deleting channel connections. x2go-DEBUG-../src/sshmasterconnection.cpp:2021> Disconnecting session. x2go-DEBUG-../src/sshmasterconnection.cpp:2027> Deleting sockets. x2go-DEBUG-../src/sshmasterconnection.cpp:2034> All channels closed and session disconnected. Quitting session loop. x2go-DEBUG-../src/sshmasterconnection.cpp:806> SshMasterConnection, instance SshMasterConnection(0x3cca590) thread finished. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. x2go-DEBUG-../src/sshmasterconnection.cpp:813> SshMasterConnection, instance SshMasterConnection(0x3cca590) finished destructor. ---------------------------------------------------------------------------------- Server ------------------------------------------------------------------------------------ running as X2Go Agent NXAGENT - Version 3.5.99.26 Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com) Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder(a)phoca-gmbh.de> Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Copyright (c) 2014-2016 Ulrich Sibiller <uli42(a)gmx.de> Copyright (c) 2014-2016 Mihai Moldovan <ionic(a)ionic.de> Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com) See https://github.com/ArcticaProject/nx-libs for more information. Info: Agent running with pid '390553'. Session: Starting session at 'Fri Feb 10 20:50:48 2023'. Info: Proxy running in client mode with pid '390553'. Info: Using errors file '/tmp/.x2go-jsw/C-jsw-53-1676055047_stDXFCE_dp32/session.log'. Info: Using stats file '/tmp/.x2go-jsw/C-jsw-53-1676055047_stDXFCE_dp32/C-jsw-53-1676055047_stDXFCE_dp32/stats'. Loop: WARNING! Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Info: Waiting for connection from 'localhost' on socket 'tcp:*:45566'. Info: Accepted connection from '127.0.0.1'. Info: Connection with remote proxy completed. Info: Using ADSL link parameters 1408/24/1/0. Info: Using agent parameters 5000/10/50/0/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found. Info: Listening to X11 connections on display ':53'. Info: Established X client connection. Info: Using shared memory parameters 1/1/0/0K. Info: Using alpha channel in render extension. Info: Not using local device configuration changes. Warning: Cannot read keystroke file '/home/jsw/.x2go/config/keystrokes.cfg'. Info: using keystrokes file '/etc/x2go/keystrokes.cfg' Info: ignoring unknown keystroke action 'debug_tree'. Info: ignoring unknown keystroke action 'regions_on_screen'. Info: ignoring unknown keystroke action 'test_input'. Info: ignoring unknown keystroke action 'deactivate_input_devices_grab'. Currently known keystrokes: close_session : Ctrl+Alt+t switch_all_screens : Ctrl+Alt+f minimize : Ctrl+Alt+m resize : Ctrl+Alt+r defer : Ctrl+Alt+e ignore : Ctrl+Alt+BackSpace force_synchronization : Ctrl+Alt+j fullscreen : Ctrl+Shift+Alt+f viewport_move_left : Ctrl+Shift+Alt+Left viewport_move_up : Ctrl+Alt+Up viewport_move_right : Ctrl+Alt+Right viewport_move_down : Ctrl+Alt+Down Info: keyboard blocking directory created: '/home/jsw/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/keyboard' Info: Keycode conversion is off Session: Session started at 'Fri Feb 10 20:50:56 2023'. Info: Screen [0] resized to geometry [1920x1200] fullscreen [0].

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user