- x2go-user - X2Go ListServ

x2gothinclient TCE-nfs -Session break
by ovt＠zaokknm.ru 25 Jun '21

25 Jun '21

1 0

Problem with ALT GR key wth linux client
by Stefan Günther 23 Jun '21

23 Jun '21

Hello, I'm running the following setup: X2Go Server 4.1.0.3-5 on Ubuntu 20.04 with XFCE X2Go Client 4.1.2.2-0 on Ubuntu 18.0.4 X2Go Client 4.1.2.2 on Windows 10 On the Linux client I have removed the directories ~/x2go and ~/.x2goclient. I now connect to the server and open a terminal windows. Pressing ALTGR + 7 gives me a "7", STRG+ALT+7 gives me a "7", too. Pressing the up arrow key, doesn't display the last command, instead I get the error, that xfce-screenshooter couldn't be started. I found some older posting about this problem and followed the suggestions: setxkbmap -print xkb_keymap { xkb_keycodes { include "xfree86+aliases(qwertz)" }; xkb_types { include "complete" }; xkb_compat { include "complete" }; xkb_symbols { include "pc+de(nodeadkeys)+inet(pc105)+group(switch)" }; xkb_geometry { include "pc(pc105)" }; }; stefan@x2go:~$ setxkbmap de stefan@x2go:~$ setxkbmap -print xkb_keymap { xkb_keycodes { include "xfree86+aliases(qwertz)" }; xkb_types { include "complete" }; xkb_compat { include "complete" }; xkb_symbols { include "pc+de+inet(pc105)+group(switch)" }; xkb_geometry { include "pc(pc105)" }; }; But even after setting the keymap to "de" I get "7" instead of "{". The strange thing is, that if I use the windows x2go client, everything is fine. The bracket is displayed and the arrow key is working as expected. Does anyone has an idea or suggestion to this? Thanks for any help, Stefan

2 2

High latency in Java based applications (dbeaver)
by Tom Korach 23 Jun '21

23 Jun '21

Hi, When using X2Go to work on Java-based applications (specifically, the Eclipse-based dbeaver dbeaver.io), there is a considerable latency. It's particularly sever when presenting dialogs, with some of them taking 3-8 second to appear (vs. <1 second locally). The raw latency from the machine to the server is quite low (10-15 ms), and: 1. Other application (via X2Go) work faster (although not completely latency-free). 2. The same program (dbeaver) works almost smoothly with other remote-desktops (e.g. NoMachine). How can this be debugged? What else can be done to improve it? Details: - which operating systems and versions are being used on the server and client, Server: Ubuntu 20.04. Client: Edition Windows 10 Home Version 20H2 Installed on ‎5/‎4/‎2021 OS build 19042.1052 Experience Windows Feature Experience Pack 120.2212.2020.0 - which versions of X2GoServer and X2GoClient are being used Client: 4.1.2.2 (Qt 4.8.6) Server: x2goserver 4.1.0.3-5 - any changes you may have made to the default configuration of the server, No changes were made. - the session settings used on the client Connection: WAN Resolution: 1920x1080 Display DPI 96 Compression: 16m-jpeg Image quality: 5 Desktop environment: XFCE. - the name of the application you are experiencing issues with dbeaver (dbeaver.io)

3 6

poweroff x2gothinclient
by ovt＠zaokknm.ru 22 Jun '21

22 Jun '21

1 0

Shutting down a remote computer via x2go
by Ski75 14 Jun '21

14 Jun '21

Working at home I want to shutdown my remote computer in the office via x2go on Friday evening and switch it back on by WakeOnLan on Monday morning. But no matter if i try to switch the remote computer off by pressing the 'Shutdown-Button' in the window of the remote desktop or by entering the command "qdbus-qt5 org.kde.ksmserver /KSMServer org.kde.KSMServerInterface.logout 0 2 2" in the command line, the x2go-Server only logs me off instead of shutting down the remote computer. Is there any configuration option I'm missing or is this the intended bahviour or are I'm just misunderstanding the documentation? https://wiki.x2go.org/doku.php/doc:usage:desktop-sharing?s[]=shutdown "...Be aware, that by selecting 'shutdown' within the shared desktop, the remote system will be turned off!..." x2Go-Version: X2GoClient V. 4.1.2.3 Thanks a lot, Tobias

2 1

Can connect, but no desktop
by Paul Gureghian 11 Jun '21

11 Jun '21

*I installed and configured x2go server on arch linux with xfce4 desktop on a rpi3 , installed the x2go client on win10, it connects to the server but I all I have is a black screen. *

1 0

Performance issues + losing mouse click ability & keyboard events
by Jooris Mettler 03 Jun '21

03 Jun '21

Hi everybody, we currently have some serious issues with x2go on our servers, performance issues plus pretty much exactly what was described here: https://www.mail-archive.com/x2go-user@lists.x2go.org/msg04009.html We have two servers running Ubuntu20.04 LTS with xfce4 (lightdm) with barely any issues for almost 6 months. In the past weeks, several users experienced serious performance issues, followed by the issue that mouse and keyboard are unusable. This issue seems to be resolved (until it appears again) by killing all user processes and logging in again. If I simply quit from x2go client side and reconnect, the issue remains. I don´t see anything "obvious" in the logs, but tbh I don´t even know what I´m looking for. I´m currently trying to reproduce these issues on a VM, but no luck (yet). Someone got an Idea? Best, Jooris

1 1

No desktop armbian server debian client
by Jeremy Ardley 03 Jun '21

03 Jun '21

My setup is an armbian server and a debian client. Both are up to date with the latest releases of all software. I have just now installed the latest distro versions of x2go I configured my client to use XFCE and ensured xfce was installed on the server The server starts fine and I can connect from the client and get prompted for password. I can see the session on the server using ps ax 4504 ? Ss 0:00 bash -l -c echo "X2GODATABEGIN:f32ca5bd-29b1-4f62-bad1-47ca4d1fd28a"; export PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2goresume-session jeremy-50-1622673380 4507 ? S 0:00 /bin/bash /usr/bin/x2goresume-session jeremy-50-1622673380_stDXFCE_dp24 800x600 lan 16m-jpeg-9 us auto 1 both no However no desktop shows on my client Checking the server syslog I see Jun 3 06:45:48 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:46:13 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:46:38 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:47:03 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:47:28 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:47:52 sentinel /usr/bin/x2gosuspend-session: ERROR: failed to suspend session with ID jeremy-50-1622673380_stDXFCE_dp24 I notice in /var/log/messages entries relating to earlier attempts to connect Jun 3 06:36:25 sentinel /usr/bin/x2gostartagent: successfully started X2Go Agent session with ID jeremy-50-1622673380_stDXFCE_dp24 Jun 3 06:36:43 sentinel /usr/bin/x2gosuspend-session: session with ID jeremy-50-1622673380_stDXFCE_dp24 has been suspended successfully What should I do now? -- Jeremy

2 4

x2gothinclient +pxe
by ovt＠zaokknm.ru 02 Jun '21

02 Jun '21

2 1

username sessions begin even after reboot without login on Ubuntu 20.04
by h i 26 May '21

26 May '21

Hello, Recently working on a new system using x2go on Ubuntu 20.04 linux. Noticed something different that we never experienced previously on 18.04. Reboots usually clear all sessions per user. After reboot on 18.04, you would see the following output from the linux command: %ps -elf | grep username 4 S username xxxx 1 0 80 0 - xxxxx - 15:20 ? 00:00:00 /lib/systemd/systemd --user 5 S username xxxx xxxx 0 80 0 - xxxxx - 15:20 ? 00:00:00 (sd-pam) However, after reboot on the Ubuntu 20.04 system, I see the following output: 4 S username XXXX 1 0 80 0 - XXXX - 20:44 ? 0:00:00 /lib/systemd/systemd --user 5 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 (sd-pam) 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/bin/pulseaudio 0 S username XXXX XXXX 0 99 - - XXXX - 20:44 ? 0:00:00 /usr/libexec/tracker-miner-fs 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfsd 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfsd-fuse /run/user/1020/gvfs -f -o big_writes 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfs-udisks2-volume-monitor 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfs-gphoto2-volume-monitor 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfs-afc-volume-monitor 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfs-mtp-volume-monitor 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/gvfs-goa-volume-monitor 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/goa-daemon 0 S username XXXX XXXX 0 80 0 - XXXX - 20:44 ? 0:00:00 /usr/libexec/goa-identity-service This behavior occurs after login to x2goclient for just one time. The usernames appear in the "top" commmand output with goa-identity-se process despite not logging for a x2goclient session after a reboot. Is there some setting one can change in x2go for Ubuntu 20.04, so these processes aren't running if a person hasn't logged in x2goclient session after reboot? Thanks. h.

1 0

Request for assistance - x2go HTML client
by Jan Bergner 22 May '21

22 May '21

Hello all, I am trying to set up the x2go HTML client on a Debian server following this instruction: https://wiki.x2go.org/doku.php/wiki:advanced:x2gohtmlclient My setup is done with Ansible, so the setup can be reproduced. The git repo containing the role can be found here: https://gitlab.com/jbergner/ansible-x2go-htmlclient Right now, it should be considered a BETA version (using snakeoil-certificates, etc.), but that is not the point. The x2go HTML client is accessible and it seems to be starting a session. However, this session is closed shortly after the initialization. Unfortunately, I cannot seem to find out, why. May be, someone can help? From start to end of the session, I get the following in the nginx access log: 192.168.122.1 - - [10/May/2021:22:38:57 +0200] "GET /assets/x2go-plugin/IMG/x2gobg.svg HTTP/1.1" 200 10261 "https://192.168.122.126/assets/x2go-plugin/" "Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Firefox/78.0" 192.168.122.1 - - [10/May/2021:22:39:04 +0200] "POST /assets/x2go-plugin/RPC/x2gorpc.cgi HTTP/1.1" 200 2180 "https://192.168.122.126/assets/x2go-plugin/" "Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Firefox/78.0" 192.168.122.1 - - [10/May/2021:22:39:19 +0200] "GET /x2gows/50001 HTTP/1.1" 101 17 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Firefox/78.0" nginxes error log: 2021/05/10 22:38:58 [error] 1516#1516: *2 FastCGI sent in stderr: "Scalar value @out[2] better written as $out[2] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 79. Scalar value @out[0] better written as $out[0] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 81. Scalar value @out[1] better written as $out[1] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 85. Scalar value @out[0] better written as $out[0] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 99. Scalar value @out[1] better written as $out[1] at /var/www/html/asse" while reading response header from upstream, client: 192.168.122.1, server: x2go-web, request: "POST /assets/x2go-plugin/RPC/x2gorpc.cgi HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "192.168.122.126", referrer: "https://192.168.122.126/assets/x2go-plugin/" 2021/05/10 22:38:58 [error] 1516#1516: *2 FastCGI sent in stderr: "ts/x2go-plugin/RPC/x2gorpc.cgi line 103. Scalar value @out[2] better written as $out[2] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 104. Scalar value @out[0] better written as $out[0] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 140. Scalar value @out[1] better written as $out[1] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 141. Scalar value @out[2] better written as $out[2] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 142. Scalar value @out[0] b" while reading response header from upstream, client: 192.168.122.1, server: x2go-web, request: "POST /assets/x2go-plugin/RPC/x2gorpc.cgi HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "192.168.122.126", referrer: "https://192.168.122.126/assets/x2go-plugin/" 2021/05/10 22:39:04 [error] 1516#1516: *2 FastCGI sent in stderr: "etter written as $out[0] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 192. Scalar value @out[1] better written as $out[1] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 193. Scalar value @out[2] better written as $out[2] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 195. Scalar value @retval[0] better written as $retval[0] at /var/www/html/assets/x2go-plugin/RPC/x2gorpc.cgi line 265" while reading response header from upstream, client: 192.168.122.1, server: x2go-web, request: "POST /assets/x2go-plugin/RPC/x2gorpc.cgi HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "192.168.122.126", referrer: "https://192.168.122.126/assets/x2go-plugin/" x2gows log: SSH pid: 1579 local port: 50000 WS port: 50001 start websockify with args --verbose --cert /etc/ssl/certs/ssl-cert-snakeoil.pem --key /etc/ssl/private/ssl-cert-snakeoil.key --ssl-only :50001 :50000 Client closed connection, terminating... Terminating websockify Terminating tunnel with pid 1579 terminating child process 1581 : ssh x2gows error log: WebSocket server settings: - Listen on :50001 - Flash security policy server - SSL/TLS support - Deny non-SSL/TLS connections - proxying from :50001 to :50000 127.0.0.1: new handler Process 127.0.0.1 - - [10/May/2021 22:39:04] "GET /x2gows/50001 HTTP/1.1" 101 - 127.0.0.1 - - [10/May/2021 22:39:04] 127.0.0.1: SSL/TLS (wss://) WebSocket connection 127.0.0.1 - - [10/May/2021 22:39:04] 127.0.0.1: Version hybi-13, base64: 'False' 127.0.0.1 - - [10/May/2021 22:39:04] 127.0.0.1: Path: '/x2gows/50001' 127.0.0.1 - - [10/May/2021 22:39:04] connecting to: :50000 127.0.0.1 - - [10/May/2021 22:39:18] :50000: Target closed connection 127.0.0.1 - - [10/May/2021 22:39:18] :50000: Closed target Thanks and best regards, Jan

2 2

Move from freenode?
by Ulrich Sibiller 21 May '21

21 May '21

AFAIKS freenode is not the network of choice anymore: https://mniip.com/freenode.txt So should we move to libera? Or elsewhere? Or drop the chat altogether? Uli

5 4

Session terminated instantly, seemingly with no errors
by Matteo Guareschi 19 May '21

19 May '21

Hello, I have been trying to figure this out for a while now. Every time I start a session from my client (arch) to my server (arch xfce), the session seems to start fine, but terminates instantly. The client reads: Info: Proxy running in server mode with pid '11128'. Session: Starting session at 'Sun May 16 15:24:13 2021'. Info: Using errors file '/home/matteo/.x2go/S-matteo-50-1621203851_stDstartxfce4_dp24/sessions'. Info: Using stats file '/home/matteo/.x2go/S-50/stats'. Loop: WARNING! Overriding auxiliary X11 port with new value '1'. Warning: Overriding auxiliary X11 port with new value '1'. Info: Using abstract X11 socket in kernel namespace for accessing DISPLAY=:0. Info: Connecting to remote host 'localhost:40084'. Info: Connected to remote proxy on FD#5. Info: Connection with remote proxy completed. Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Warning: Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Info: Using ADSL link parameters 1408/24/1/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_24'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found.Session: Terminating session at 'Sun May 16 15:24:15 2021'. Session: Session terminated at 'Sun May 16 15:24:15 2021'. And the error files in the S-matteo-50-[...] directory are sessions, options and a spool dir. Sessions only says what versions were found. On the server side in the C-matte-50 directory session.log gives the rather uninteresting errors: Error: keyboard file not created: Is a directory Error: Aborting session with 'Could not open default font 'fixed''. before terminating. The system log itself /var/log/user.log does not report any errors, but only terminates the session. The clients file reports only: error opening security policy file /usr/local/lib/nx/X11/xserver/SecurityPolicy At this point I have exhausted my resources. I have tried the client from a different OS and the result is the same. From what I understand the fixed font error is most likely a red herring, but I have installed xorg-fonts-misc for what it's worth, with no difference. Lastly I should mention that the server runs xfce4 fine on the machine itself (using dbus-launch also makes no difference). I would really appreciate any help. -- Matteo Guareschi

2 5

Re: [X2Go-User] Removing "Suspend X2go Session.." in Ubuntu Mate desktop System Panel , 20.04
by h i 16 May '21

16 May '21

Okay, Thanks. I was able to get it to suspend using both methods. That was a mistake on my part. Too many x2go client windows open. Using the command line x2gosuspend-session worked and properly suspended the session. Clicking on the item from the mate desktop menu worked as well. Thanks for providing insight on how this menu item is now coded in the Mate-panel applet with 20.04. It looks like it can't be removed easily. Since it just provides an additional option for suspending the session, removing it most likely isn't necessary. Thanks again. h ________________________________ From: Mike Gabriel Sent: Sunday, May 16, 2021 3:34 PM To: h i Cc: x2go-user(a)lists.x2go.org Subject: Re: [X2Go-User] Removing "Suspend X2go Session.." in Ubuntu Mate desktop System Panel , 20.04 Hi, On So 16 Mai 2021 21:08:45 CEST, h i wrote: > Hello, > > How can you remove the "Suspend X2Go Sesseion..." item from the > Ubuntu Mate System panel? > > [cid:8d0d43b2-6e97-4a50-87a4-d76edbc29ab6] > > In Ubuntu 18.04, this was linked with x2gomatebindings. Uninstalling > the bindings removed it. However, with Ubuntu 20.04, I could not > locate x2gomatebindings in the Ubuntu repository. I want to remove > it because we don't need it and it doesn't work well with x2go > client. Clicking on the item makes the desktop session disappear, > but the x2go client window says the session is still running and > doesn't disappear. > > Thanks. > > h. The "Suspend X2Go Session..." menu item is now coded into the corresponding MATE panel applet (via librda). Currently, there is no "switch" to disable it, but it could be a feature request. The other issue is that X2Go Client does not recognize the session suspension properly when done from inside the session, it seems. If you open a terminal in the X2Go session and issue the command x2gosuspend-session on the command line, do you observe the same behaviour? (i.e. session goes away, but X2Go Client does not get it?) Mike -- DAS-NETZWERKTEAM c\o Technik- und Ökologiezentrum Eckernförde Mike Gabriel, Marienthaler Str. 17, 24340 Eckernförde mobile: +49 (1520) 1976 148 landline: +49 (4351) 850 8940 GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de

1 0

Removing "Suspend X2go Session.." in Ubuntu Mate desktop System Panel , 20.04
by h i 16 May '21

16 May '21

Hello, How can you remove the "Suspend X2Go Sesseion..." item from the Ubuntu Mate System panel? [cid:8d0d43b2-6e97-4a50-87a4-d76edbc29ab6] In Ubuntu 18.04, this was linked with x2gomatebindings. Uninstalling the bindings removed it. However, with Ubuntu 20.04, I could not locate x2gomatebindings in the Ubuntu repository. I want to remove it because we don't need it and it doesn't work well with x2go client. Clicking on the item makes the desktop session disappear, but the x2go client window says the session is still running and doesn't disappear. Thanks. h.

2 1

Re: [X2Go-User] x2go-user Digest, Vol 85, Issue 9
by andrew glaeser 14 May '21

14 May '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Handbrake itself is probably fixed for me , but x2go is still troubling me, now I _can_not_ reconnect to running session anymore, instead there is a small Window, indicating there is a running x2go session, but the Resume button is greyed out... I wonder, whether you should continue to provide stable packages for Debian bulls-eye, since the native Debian packages are not usable, or could it be I was not testing them thoroughly enough?? Could this be a result of recent systemd-upgrade? > Linux bulls-eye 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) x86_64 > > The programs included with the Debian GNU/Linux system are free software; > the exact distribution terms for each program are described in the > individual files in /usr/share/doc/*/copyright. > > Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent > permitted by applicable law. > Last login: Thu May 13 11:05:17 2021 from 192.168.0.58 > root@bulls-eye:~# ls -l /etc/apt/sources.list > -rw-r--r-- 1 root root 910 Mar 28 10:21 /etc/apt/sources.list > root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# aptitude update > Get: 1 http://deb.debian.org/debian bullseye InRelease [146 kB] > Hit http://security.debian.org/debian-security bullseye-security InRelease > Hit http://packages.x2go.org/debian bullseye InRelease > Get: 2 http://deb.debian.org/debian bullseye/main amd64 DEP-11 Metadata > [4,016 kB] Get: 3 http://deb.debian.org/debian bullseye/main DEP-11 64x64 Icons [7,309 kB] > Fetched 11.5 MB in 4s (3,158 kB/s) > > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 850 i 4.1.0.4-0x2go1.2~git20210419.1935+11.heuler.1 100 > root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# aptitude update > Hit http://packages.x2go.org/debian bullseye InRelease > Hit http://deb.debian.org/debian bullseye InRelease > Hit http://security.debian.org/debian-security bullseye-security InRelease > Get: 1 http://packages.x2go.org/debian bullseye/main amd64 Packages [12.6 > kB] Fetched 12.6 kB in 1s (12.4 kB/s) > > Current status: 70 (+9) new. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 850 i 4.1.0.4-0x2go1.2~git20210419.1935+11.heuler.1 100 > root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# aptitude update > Hit http://deb.debian.org/debian bullseye InRelease > Hit http://security.debian.org/debian-security bullseye-security InRelease > Get: 1 http://packages.x2go.org/debian testing InRelease [31.2 kB] > Get: 2 http://packages.x2go.org/debian testing/main amd64 Packages [12.6 kB] > Fetched 43.8 kB in 1s (60.4 kB/s) > > Current status: 70 (+9) new. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 850 i 4.1.0.4-0x2go1.2~git20210419.1935+11.heuler.1 100 > root@bulls-eye:~# aptitude install > 4.1.0.4-0x2go1.2~git20210419.1935+11.heuler.1 No packages will be installed, upgraded, or removed. > 0 packages upgraded, 0 newly installed, 0 to remove and 8 not upgraded. > Need to get 0 B of archives. After unpacking 0 B will be used. > > root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# aptitude update > Get: 1 http://packages.x2go.org/debian bullseye InRelease [31.2 kB] > Hit http://deb.debian.org/debian bullseye > InRelease Hit http://security.debian.org/debian-security bullseye-security InRelease > Get: 2 http://packages.x2go.org/debian bullseye/heuler amd64 Packages [24.8 > kB] Fetched 56.0 kB in 6s (9,298 B/s) > > Current status: 3 (-5) upgradable, 104 (+43) new. > root@bulls-eye:~# aptitude upgrade > No packages will be installed, upgraded, or removed. > 0 packages upgraded, 0 newly installed, 0 to remove and 3 not upgraded. > Need to get 0 B of archives. After unpacking 0 B will be used. > > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 850 i 4.1.0.4-0x2go1.2~git20210419.1935+11.heuler.1 testing 995 > root@bulls-eye:~# aptitude search x2go > p cups-x2go - Virtual X2Go printer for > CUPS p libpam-x2go - PAM Module to check credentials against X2Go > p libpam-x2go-dev - PAM Module to check credentials > against X2Go p libx2go-config-perl - Perl X2Go::Config package > i A libx2go-log-perl - Perl X2Go::Log > package i A libx2go-server-db-perl - Perl X2Go::Server:DB package > p libx2go-server-db-perl-dbgsym - debug symbols for > libx2go-server-db-perl i A libx2go-server-perl - Perl X2Go::Server package > p libx2go-telekinesis-apps-perl - Telekinesis application support > for X2Go (Pe p libx2go-telekinesis-client-perl - Telekinesis client for X2Go (Perl package) > p libx2go-telekinesis-perl - Telekinesis for X2Go (common Perl > package) p libx2go-telekinesis-server-perl - Telekinesis server for X2Go (Perl package) > p libx2go-utils-perl - Perl X2Go::Utils > package p lightdm-remote-session-x2go - LightDM Remote Logon Support for X2Go sessio > p pinentry-x2go - OpenPGP (smart)card authentication > dialog wi p pinentry-x2go-dbgsym - debug symbols for pinentry-x2go > p plasma-widget-x2go - Plasma widget for control X2Go > sessions p plasma-widget-x2go-dbgsym - debug symbols for plasma-widget-x2go > p python-x2go - Python module providing X2Go > client API (Pyt p python-x2go-doc - Python module providing X2Go client API (doc > p python-x2gobroker-doc - X2Go Session Broker (Python3 > module document p python3-x2go - Python module providing X2Go client API (Pyt > p python3-x2gobroker - X2Go Session Broker (Python3 > modules) i x2go-keyring - GnuPG keys of all X2Go developers and the X2 > p x2goadmincenter - X2Go Administration Center (Qt4 > client) p x2goadmincenter-dbgsym - debug symbols for x2goadmincenter > p x2goadminserver - X2Go Administration Server > (Perl/CGI) p x2gobroker - X2Go Session Broker (executable) > p x2gobroker-agent - X2Go Session Broker (remote > agent) p x2gobroker-agent-dbgsym - debug symbols for x2gobroker-agent > p x2gobroker-authservice - X2Go Session Broker (PAM > authentication serv p x2gobroker-common - X2Go Session Broker (common files) > p x2gobroker-daemon - X2Go Session Broker (standalone > daemon) p x2gobroker-loadchecker - X2Go Session Broker (load checker service) > p x2gobroker-ssh - X2Go Session Broker (SSH > broker) p x2gobroker-ssh-dbgsym - debug symbols for x2gobroker-ssh > p x2gobroker-wsgi - X2Go Session Broker > (WSGI) p x2gocdmanager - temporary dependency package for migration t > p x2goclient - X2Go Client application > (Qt5) p x2goclient-dbg - X2Go Client application (Qt5), debug symbols > p x2godesktopsharing - Share X11 desktops with other > users via X2Go p x2godesktopsharing-dbgsym - debug symbols for x2godesktopsharing > p x2gokdriveclient - KDrive graphical client backend > for X2Go Cli p x2gokdriveclient-dbgsym - debug symbols for x2gokdriveclient > p x2golxdebindings - LXDE bindings for > X2Go p x2gomatebindings - X2Go MATE bindings and MIME types > p x2gomatebindings-dbgsym - debug symbols for > x2gomatebindings p x2goplugin - X2Go Client (Qt4) as browser plugin (dummy p > p x2goplugin-dbg - X2Go Client application (Qt4), > debug symbols p x2goplugin-provider - Provide X2Go Plugin via Apache webserver (du > i x2goserver - X2Go > server i A x2goserver-common - X2Go Server (common files) > p x2goserver-desktopsharing - Share X11 desktops with other > users via X2Go i A x2goserver-extensions - X2Go Server (extension support) > i A x2goserver-fmbindings - X2Go Server (file manager > bindings) i A x2goserver-printing - X2Go server (printing support) > i A x2goserver-x2goagent - X2Go Server's X2Go Agent > Xserver p x2goserver-x2godialog - X2Go Server's X2Go dialog tool > i A x2goserver-x2gokdrive - X2Go Server's X2Go KDrive > Xserver i A x2goserver-xsession - X2Go Server (Xsession runner) > p x2gosmartcardrules - temporary dependency package for > migration t p x2gothinclient - temporary dependency package for migration t > p x2gothinclient-cdmanager - clientside daemon enabling > automatic CD-Rom p x2gothinclient-cdmanager-dbgsym - debug symbols for x2gothinclient-cdmanager > p x2gothinclient-chroot - Install X2Go Thin Client chroot > (metapackage p x2gothinclient-common - X2Go thin client environment (common files) > p x2gothinclient-displaymanager - login daemon starting x2goclient > in displaym p x2gothinclient-management - Management tools for X2Go Thin Client chroot > p x2gothinclient-minidesktop - Minimal desktop for X2Go Thin > Client chroot p x2gothinclient-smartcardrules - UDEV rules for smartcard readers > p x2gothinclient-usbmount - clientside usb mass-storage device > mounting p x2gothinclientmanagement - temporary dependency package for migration t > p x2gousbmount - temporary dependency package for > migration t i A xserver-x2gokdrive - KDrive graphical server backend for X2Go Ser > p xserver-x2gokdrive-dbgsym - debug symbols for > xserver-x2gokdrive root@bulls-eye:~# ate show xserver-x2gokdrive > -bash: ate: command not found > root@bulls-eye:~# aptitude show xserver-x2gokdrive > Package: xserver-x2gokdrive > Version: 0.0.0.1-0x2go1~git20200120.183+11.heuler.1 > New: yes > State: installed > Automatically installed: yes > Priority: optional > Section: heuler/x11 > Maintainer: X2Go Developers <x2go-dev(a)lists.x2go.org> > Architecture: amd64 > Uncompressed Size: 2,114 k > Depends: xserver-common (>= 1.20.3~), libc6 (>= 2.29), libgcrypt20 (>= > 1.8.0), libgl1, libjpeg62-turbo (>= 1.3.1), libpixman-1-0 (>= 0.30.0), libpng16-16 > (>= 1.6.2-1), libunwind8, libxau6, libxfont2 (>= 1:2.0.1), zlib1g > (>= 1:1.1.4) > Recommends: x2goserver (>= 4.1.0.4~), libgl1-mesa-dri (>= 7.1~rc1) > Description: KDrive graphical server backend for X2Go Server > X2Go is a server based computing environment with > * session resuming > * low bandwidth support > * session brokerage support > * client-side mass storage mounting support > * client-side printing support > * audio support > * authentication by smartcard and USB stick > > This package is built from the X.org xserver module. X2Go KDrive is a > KDrive-based Xserver for X2Go. It provides support for running modern desktop environments like > GNOME, KDE Plasma, Cinnamon, etc. in X2Go Sessions. > > The X2Go KDrive graphical backend is not suitable for low bandwidth WAN > connections between X2Go Client and X2Go Server. It is supposed for X2Go being used on the local > area network. > > More information about X.Org can be found at: <URL:https://www.x.org> > > More information about X2Go can be found at: <URL:https://wiki.x2go.org> > Homepage: https://code.x2go.org/releases/source/x2gokdrive > > > root@bulls-eye:~# ate show x2goadminserver > -bash: ate: command not found > root@bulls-eye:~# aptitude show x2goadminserver > Package: x2goadminserver > Version: 0.0.0.1-0x2go1~git20190821.94+11.heuler.1 > New: yes > State: not installed > Priority: optional > Section: heuler/x11 > Maintainer: X2Go Developers <x2go-dev(a)lists.x2go.org> > Architecture: all > Uncompressed Size: 72.7 k > Description: X2Go Administration Server (Perl/CGI) > X2Go is a serverbased computing environment with > * session resuming > * low bandwidth support > * session brokerage support > * client side mass storage mounting support > * audio support > * authentication by smartcard and USB stick > > X2Go Admin Server is the server-side component of the X2Go Administration > center. > For installation instruction/howtos/FAQs please visit http://wiki.x2go.org > Homepage: http://code.x2go.org/releases/source/x2goadmincenter > > > root@bulls-eye:~# aptitude versions x2goadminserver > p 0.0.0.1-0x2go1~git20190821.94+11.heuler.1 > testing 995 root@bulls-eye:~# aptitude show x2goadmincenter > Package: x2goadmincenter > Version: 0.0.0.1-0x2go1~git20190821.94+11.heuler.1 > New: yes > State: not installed > Priority: optional > Section: heuler/x11 > Maintainer: X2Go Developers <x2go-dev(a)lists.x2go.org> > Architecture: amd64 > Uncompressed Size: 2,816 k > Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libqt4-network (>= 4:4.5.3), > libqt4-xml (>= 4:4.5.3), libqtcore4 (>= 4:4.7.0~beta1), libqtgui4 (>= 4:4.5.3), > libstdc++6 (>= 5) > Description: X2Go Administration Center (Qt4 client) > X2Go is a serverbased computing environment with > * session resuming > * low bandwidth support > * session brokerage support > * client side mass storage mounting support > * audio support > * authentication by smartcard and USB stick > > X2Go Admin Center is a graphical client (Qt4) for the X2Go administration > interface. You can use it to administrate a single X2Go server, as well as multi-server based > X2Go clusters. > Homepage: http://code.x2go.org/releases/source/x2goadmincenter > > > root@bulls-eye:~# aptitude install x2goadmincenter x2goadminserver > The following NEW packages will be installed: > x2goadmincenter{b} x2goadminserver > 0 packages upgraded, 2 newly installed, 0 to remove and 3 not upgraded. > Need to get 630 kB of archives. After unpacking 2,889 kB will be used. > The following packages have unmet dependencies: > x2goadmincenter : Depends: libqt4-network (>= 4:4.5.3) which is a virtual > package and is not provided by any available package > > Depends: libqt4-xml (>= 4:4.5.3) which is a virtual > package and is not provided by any available package > > Depends: libqtcore4 (>= 4:4.7.0~beta1) which is a > virtual package and is not provided by any available package > > Depends: libqtgui4 (>= 4:4.5.3) which is a virtual > package and is not provided by any available package > > The following actions will resolve these dependencies: > > Keep the following packages at their current version: > 1) x2goadmincenter [Not Installed] > > > > Accept this solution? [Y/n/q/?] y > The following NEW packages will be installed: > x2goadminserver > 0 packages upgraded, 1 newly installed, 0 to remove and 3 not upgraded. > Need to get 12.7 kB of archives. After unpacking 72.7 kB will be used. > Do you want to continue? [Y/n/?] > Get: 1 http://packages.x2go.org/debian bullseye/heuler amd64 > x2goadminserver all 0.0.0.1-0x2go1~git20190821.94+11.heuler.1 [12.7 kB] Fetched 12.7 kB in 0s (89.4 kB/s) > Selecting previously unselected package x2goadminserver. > (Reading database ... 271760 files and directories currently installed.) > Preparing to > unpack .../x2goadminserver_0.0.0.1-0x2go1~git20190821.94+11.heuler.1_all.deb ... Unpacking x2goadminserver (0.0.0.1-0x2go1~git20190821.94+11.heuler.1) ... > Setting up x2goadminserver (0.0.0.1-0x2go1~git20190821.94+11.heuler.1) ... > Processing triggers for man-db (2.9.4-2) ... > > root@bulls-eye:~# dpkg -L x2goadminserver > /. > /etc > /etc/x2go > /etc/x2go/x2goadminserver.conf > /usr > /usr/lib > /usr/lib/cgi-bin > /usr/lib/cgi-bin/x2gorpcserver.cgi > /usr/lib/x2go > /usr/lib/x2go/x2goadminserver.pm > /usr/lib/x2go/x2goadminserver_backend_cipux.pm > /usr/lib/x2go/x2goadminserver_backend_ldap.pm > /usr/share > /usr/share/doc > /usr/share/doc/x2goadminserver > /usr/share/doc/x2goadminserver/AUTHORS > /usr/share/doc/x2goadminserver/changelog.Debian.gz > /usr/share/doc/x2goadminserver/copyright > /usr/share/doc/x2goadminserver/html > /usr/share/doc/x2goadminserver/html/man5 > /usr/share/doc/x2goadminserver/html/man5/x2goadminserver.conf.5.html > /usr/share/doc/x2goadminserver/html/man8 > /usr/share/doc/x2goadminserver/html/man8/x2gorpcserver.cgi.8.html > /usr/share/man > /usr/share/man/man5 > /usr/share/man/man5/x2goadminserver.conf.5.gz > /usr/share/man/man8 > /usr/share/man/man8/x2gorpcserver.cgi.8.gz > root@bulls-eye:~# apropos adminserver > x2goadminserver.conf (5) - X2Go Admin Server Configuration File > root@bulls-eye:~# man x2goadminserver.conf > root@bulls-eye:~# cat /etc/x2go/x2goadminserver.conf > # Copyright (C) 2010-2015 by Oleksandr Shneyder > <oleksandr.shneyder(a)obviously-nice.de> # Copyright (C) 2010-2015 by Heinz-M. Graesing <heinz-m.graesing(a)obviously-nice.de> > > # X2Go Admin Server is free software; you can redistribute it and/or modify > # it under the terms of the GNU Affero General Public License as published > # by the Free Software Foundation; either version 3 of the License, or > # (at your option) any later version. > > # X2Go Admin Server is distributed in the hope that it will be useful, > # but WITHOUT ANY WARRANTY; without even the implied warranty of > # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > # GNU Affero General Public License for more details. > # > # You should have received a copy of the GNU Affero General Public License > # along with this program; if not, see <http://www.gnu.org/licenses/> > # or write to > # Free Software Foundation, Inc., > # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. > > #backend=cipux > > #[cipux_backend] > #url=http://localhost:8001/RPC2 > > backend=x2goldap > > [x2goldap] > url=ldap://localhost > basedn="o=org,c=de" > smbgroup=S-1-5-21-000000000-0000000000-0000000000-513 > sid=S-1-5-21-000000000-0000000000-0000000000 > dbhost=localhost > dbport=5432 > dbuser=x2godbadmin > dbpass=secret > dbname=x2go_sessions > dbssl=prefer > root@bulls-eye:~# > root@bulls-eye:~# exit > logout > Connection to bulls-eye closed. > andrew@a68n:~$ x2goclient > x2go-INFO-1> "Starting X2Go Client 4.1.2.1..." > x2go-WARNING-1> English language requested, not loading translator. > x2go-WARNING-1> English language requested, not loading translator. > QObject::connect: No such slot ONMainWindow::slotCheckAgentProcess() > x2go-INFO-3> "Started X2Go Client." > x2go-INFO-8> "Starting connection to server: bulls-eye:22" On Thu, 13 May 2021 12:00:06 +0200 x2go-user-request(a)lists.x2go.org wrote: > Send x2go-user mailing list submissions to > x2go-user(a)lists.x2go.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.x2go.org/listinfo/x2go-user > or, via email, send a message with subject or body 'help' to > x2go-user-request(a)lists.x2go.org > > You can reach the person managing the list at > x2go-user-owner(a)lists.x2go.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of x2go-user digest..." > > > Today's Topics: > > 1. Fw: x2go external upstream packages Debian (andrew glaeser) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 13 Mar 2021 10:34:30 +0100 > From: andrew glaeser <bugs(a)irregulaire.info> > To: x2go-user(a)lists.x2go.org > Subject: [X2Go-User] Fw: x2go external upstream packages Debian > Message-ID: <20210313103430.56785b3b(a)a68n.lokal> > Content-Type: text/plain; charset=US-ASCII > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > Begin forwarded message: > > Date: Sat, 13 Mar 2021 10:31:12 +0100 > From: andrew glaeser <bugs(a)irregulaire.info> > To: 984721(a)bugs.debian.org > Subject: x2go external upstream packages > > > - -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > OK, I did check out the upstream packages of x2goserver, because of this bug > in handbrake (clearly not a feature in my view, but significantly worsened > functionality in an important detail): > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984967 > > Either I did something wrong there about pinning, or it did not work > properly, but my impression is that upstream x2go-packages do no longer > exist, i.e. the repository still exists, but will not deliver any new > packages for bullseye release: > > -----BEGIN PGP SIGNATURE----- iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCYJ6abwAKCRDn6sEfJS3n C6tyAJ9hrvkP1KRmS4at/d+bL58RrNzYwwCgsIgEYeAtw/nUm+YhqVSPF8Gb2Vg= =j7jx -----END PGP SIGNATURE-----

1 0

Re: [X2Go-User] x2goserver Requires: base64
by Scott Wood 11 May '21

11 May '21

Thanks, Mike, I already had the executable so the "yum update --skip-broken" it proposed did the trick but I was flagging it as a possible package dependency issue. I've never done package building but for folks who build the x2go rpms, changing the dependency from it needing the "base64" package to it needing the "coreutils" package would resolve the: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > (x2go-nightly-epel) > Requires: base64 resulting in a smoother install. Cheers! Scott ________________________________ From: Mike Gabriel Sent: Tuesday, May 11, 2021 7:38 AM To: Scott Wood Cc: x2go-user(a)lists.x2go.org; ionic(a)ionic.de Subject: Re: [X2Go-User] x2goserver Requires: base64 Hi Scott, hi Mihai, On Mo 19 Apr 2021 04:28:32 CEST, Scott Wood wrote: > Hi folks, > > Just looking to upgrade to nightly on a CentOS7 system. I have the > repo file installed. I disabled the default and enabled the nightly > and gave it the old "yum update "x2go*" > > ... > Resolving Dependencies > --> Running transaction check > ---> Package x2goserver.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package x2goserver.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > --> Processing Dependency: perl-X2Go-Server = > 4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 for package: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > --> Processing Dependency: perl(X2Go::Server::Agent::NX::Options) > for package: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > --> Processing Dependency: base64 for package: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > ---> Package x2goserver-common.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > --> Processing Dependency: x2goserver-common = > 4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 for package: > perl-X2Go-Log-4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7.x86_64 > --> Processing Dependency: x2goserver-common = > 4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 for package: > perl-X2Go-Server-DB-4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7.x86_64 > ---> Package x2goserver-common.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package x2goserver-extensions.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package x2goserver-extensions.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package x2goserver-x2goagent.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package x2goserver-x2goagent.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package x2goserver-xsession.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package x2goserver-xsession.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > --> Running transaction check > ---> Package perl-X2Go-Log.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package perl-X2Go-Log.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package perl-X2Go-Server.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package perl-X2Go-Server.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package perl-X2Go-Server-DB.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated > ---> Package perl-X2Go-Server-DB.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > ---> Package x2goserver.x86_64 > 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update > --> Processing Dependency: base64 for package: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > --> Finished Dependency Resolution > Error: Package: > x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 > (x2go-nightly-epel) > Requires: base64 > You could try using --skip-broken to work around the problem > You could try running: rpm -Va --nofiles --nodigest > > There is no package in standard repos that I could find names > base64. Any tips? > > Cheers! I encountered the same with the DEB packages. The base64 executable normally is available in one of the distro's core packages (in general, there might be exceptions). Mike -- DAS-NETZWERKTEAM c\o Technik- und Ökologiezentrum Eckernförde Mike Gabriel, Marienthaler Str. 17, 24340 Eckernförde mobile: +49 (1520) 1976 148 landline: +49 (4351) 850 8940 GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de

1 0

Huge session.log files in user /tmp folder
by Mark Lamers 11 May '21

11 May '21

Hi, We run a x2go server for scientists who while worjk with python and R scripts on large data sets. However some user create immense large session logs in /tmp/.x2go-$user/$user-XX-XXXXXXXXXXX_stDMATE_dp32/session.log. These a sparse files but a certain point fill up out /tmp partition. Is there a way to reduce these files or set a max size per user? Regards Mark

2 1

x2goserver Requires: base64
by Scott Wood 11 May '21

11 May '21

Hi folks, Just looking to upgrade to nightly on a CentOS7 system. I have the repo file installed. I disabled the default and enabled the nightly and gave it the old "yum update "x2go*" ... Resolving Dependencies --> Running transaction check ---> Package x2goserver.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package x2goserver.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update --> Processing Dependency: perl-X2Go-Server = 4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 for package: x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 --> Processing Dependency: perl(X2Go::Server::Agent::NX::Options) for package: x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 --> Processing Dependency: base64 for package: x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 ---> Package x2goserver-common.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated --> Processing Dependency: x2goserver-common = 4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 for package: perl-X2Go-Log-4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7.x86_64 --> Processing Dependency: x2goserver-common = 4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 for package: perl-X2Go-Server-DB-4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7.x86_64 ---> Package x2goserver-common.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package x2goserver-extensions.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package x2goserver-extensions.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package x2goserver-x2goagent.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package x2goserver-x2goagent.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package x2goserver-xsession.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package x2goserver-xsession.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update --> Running transaction check ---> Package perl-X2Go-Log.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package perl-X2Go-Log.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package perl-X2Go-Server.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package perl-X2Go-Server.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package perl-X2Go-Server-DB.x86_64 0:4.1.0.4-0.0x2go1.0.git20200228.1815.heuler.el7 will be updated ---> Package perl-X2Go-Server-DB.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update ---> Package x2goserver.x86_64 0:4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7 will be an update --> Processing Dependency: base64 for package: x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 --> Finished Dependency Resolution Error: Package: x2goserver-4.1.0.4-0.0x2go1.0.git20210418.1930.heuler.el7.x86_64 (x2go-nightly-epel) Requires: base64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest There is no package in standard repos that I could find names base64. Any tips? Cheers!

3 2

deepin?
by Jeff Sadowski 09 May '21

09 May '21

Anyone know if I can start a deepin desktop over x2go? I'm using Fedora if that makes a difference.

1 0

Automatically select New session when there are already other sessions from other client
by Bambang P 07 May '21

07 May '21

How can we force the user to select New session when on connect there are already other sessions from other client? To be clear, here is the scenario 1. HQ computer run the x2go server 2. Computer 1: a supervisor run x2go client and accessiong the server 3. Computer 2 want to access the server, after authenticate the connection he is then presented with Select session form with the computer 1 session listed. If the he double click the computer 1 session, he is hijacking the computer 2 session. How can I prevent this situation? Is there a way to force so he can only create a new session? -- Bambang P http://bpranoto.blogspot.com

2 3

Wayland launch scripts being used?
by Jeff Sadowski 04 May '21

04 May '21

So I'm not sure why so many of my desktops in Fedora have stopped working with x2go but I heavily suspect it is them transitioning all desktops to wayland. I know gnome still has an option to select xorg from the console but x2go does not provide any clarification on this kind of selection. Maybe if I understood how the server side selects the script to run to start the desktop depending on the selection from the client side I could help the package maintainers make things easier for x2go users. All I know for certain is: I was using XFCE desktop in Fedora 33 when I upgraded to Fedora 34 XFCE became unusable over x2go. I started trying other desktops and noticed they do not act right. Gnome over x2g on fedora 34 doesn't even start. KDE seems to have some issues. Mate seems to work.

2 4

Frozen Login Screen "kscreenlocker_greet"
by Thomas Roebbenack 04 May '21

04 May '21

Is there any problems known about frozen sessions at reopen it after a some time? - This problem occurs since 3 days now, don't know why and what exactly happen (probably system updates). Before it worked without problems. - I working on "Ubuntu 20.04.2 LTS" and KDE Plasma Desktop (5.18.5) (Framework 5.68.0, QT 5.12.8) What exactly happen: - Open a session working as expected (with opened Session/Window the Screenlocker occurs, but I can move the mouse and enter the password) - After closing the window (the session runs in the background), I can reconnect after a short time ~10 Minutes, the screenlocker occurs, but I can move the mouse and enter the password. - But, after a longer time (don't know exactly how long), If I reconnect the screenlocker occurs, but the screens seems to be frozen. I can move the mouse, nothing happen, try to enter some keys, nothing happen. Looks like the screensaver is dead. The CPU load of 1 core is 100% (kscreenlocker_greet + a x11 process). -> The only thing that worked at the moment, try to open a second session gives me the possibility to close the first one, than I can reconnect. But I have to kill (-9) the both running processes to stop feed my CPU load. -> Disable the screensaver is no option, because there exists a directive to use it. Any suggestions? Any Ideas? Thank you in advance. Thomas

2 1

mouse 1 cm too low
by richard lucassen 17 Apr '21

17 Apr '21

Hello list, I have run x2go for many years now without any problem. I have two different servers running Debian testing and x2go 4.1.0.3-5, multiple clients running the same OS and x2go client. I run WindowMaker both on client and servers. This has worked for many years. Weird thing: the active clicking point for the mouse is 1 cm above the mouse. Restarting client and server does not make any difference. AFAIK these x2go versions have not changed (underlying libraries might have of course). I tested this on a few clients: same problem. It make x2go almost unusable. Anyone a hint what to test and where to look for this weird issue? R. -- richard lucassen http://contact.xaq.nl/

2 16

Multiple connexion with the same user name
by kanssoune.saliya＠external.tractebel.engie.com 06 Apr '21

06 Apr '21

Hello everyone ! I would like to configure remote login to CentOS 7 servers using x2go and allow multiple login with the same user i.e. many users use the same ID and password to log in at the same time. Does x2go allow it? I explain below a little bit more our infra : * We use NIS as user authentication * We have more than 10 different Linux workstations * Each colleague can connect on every workstations * We use generic account for some purpose i.e. many users use the same ID and password Do you thing that this is possible to configure with x2go? If yes, what are the steps to follow? What desktop environment (MATE, XFCE, GNOME ...) will be best adapted? Thanks! ENGIE Mail Disclaimer: http://www.engie.com/disclaimer/

2 1

One application (Digikam) fails, apparently randomly
by Chris Green 02 Apr '21

02 Apr '21

Well I'm very confused now, I thought I could see a pattern but I can't. I'll report what I have discovered so far though. I'm running x2gclient 4.1.2.2 (as installed from the Ubuntu repositories) on my xubuntu 20.10 laptop. I'm running the server on my xubuntu 20.10 desktop machine, again just as installed from the Ubuntu repositories:- x2goserver: 4.1.0.3 x2goserver-common: 4.1.0.3 x2goserver-extensions: 4.1.0.3 x2goserver-fmbindings: 4.1.0.3 x2goserver-printing: 4.1.0.3 x2goserver-x2goagent: 3.5.99.24 x2goserver-xsession: 4.1.0.3 I have been trying a mix of three types of session, as follows (with results):- 1 - A small Python GUI program as a 'Single Application', this always runs without any problem at all, it just works every time. 2 - An XFCE session, this works every time and doesn't cause any major issues but it does occasionally pop-up windows in the server session as follows:- A window saying "Authentication is required to create a colour profile" and I have to enter my sudo user password. After the above pop-up I sometimes get a second one saying "Authentication is required to operate a colour managed device" The above two pop-ups only appear occasionally, usually the XFCE session just starts up and runs normally. Once I've entered my sudo password in response the session runs OK. 3 - A Digikam session as a 'Single Application', this does work sometimes but more often it appears to start OK, then xfwm4 on the *client* crashes and the Digikam session disappears even though it is still running on the desktop machine. I can't see any consistent reason for when it does work or when it doesn't work. Digikam is running from a big Appimage. Running digikam in an XFCE session running in x2go works perfectly, or at least I've not managed to crash it ever. It's only when run as a 'Single Application' that it fails. I guess I can just run Digikam in an XFCE session but I'd like to be able to just run Digikam. It's frustrating that it sometimes works but I can't see what is needed for it to work. As I said elsewhere I've run memtest on the desktop machine for two whole passes and it showed no errors. I'm happy to add debug flags to either end to see if it's possible to diagnose this. -- Chris Green

2 2

Cant start X.Org Server
by Martti Pitkanen 01 Apr '21

01 Apr '21

Hi, I experimented different settings in my Win X2Go -client, after which I started getting "x2client Cant start X.Org Server. Please check your installation." Afre that X2Go closes. I uninstalled it and removed all references to x2go by using regedit. Any idea what else I can do? Thanks, Martti Pitkanen

2 1

Error on resume/start: Call to bind failed for NX. Error is 98 'Address already in use'.
by Simon Beißer 31 Mar '21

31 Mar '21

Hello, We are frequently experiencing problems, especially with the session resume but also with the start of sessions. On x2goclient the session is terminated immediately after login with "finished". The session.log shows the following error message: Loop: PANIC! Call to bind failed for NX. Error is 98 'Address already in use'. Error: Call to bind failed for NX. Error is 98 'Address already in use'. After several login attempts or after a short wait the login is possible again without any problems. We run several X2Go installations. The problem occurs across all of our installations. We are using Ubuntu 20.04 with XFCE and the latest NXAGENT 3.5.99.26. Does anyone know this behavior? Is there already a solution? Best regards -- Simon Beißer Hetzner Online GmbH Industriestr. 25 91710 Gunzenhausen Tel: +49 9831 505-129 Fax: +49 9831 505-3 www.hetzner.com Registergericht Ansbach, HRB 6089 Geschäftsführer: Martin Hetzner Stephan Konvickova, Günther Müller Hinweise zur Verarbeitung Ihrer personenbezogenen Daten im Rahmen der Kommunikation mit Ihnen finden Sie unter www.hetzner.de/datenschutzhinweis.

1 0

First time using list - how to log on to PC with x2go after reboot?
by Carlos Alfaro 30 Mar '21

30 Mar '21

I have noticed that I can log on to a pc which has an x2go server but only after I log on, after reboot I would have to log on to get access. Any way to enable it so I can log on to the server without having to sign on first? Sort of how google remote desktop works? thanks

3 3

x2go to access Linux - issues with graphical updates
by Anonymous Japhering 18 Mar '21

18 Mar '21

X2Go Client v. 4.1.1.1 (Qt - 5.9.5) Guest Linux Mint 5.4.0-66-generic #74-Ubuntu SMP x86_64 Host Linux Mint 5.4.0-67-generic #75~18.04.1-Ubuntu SMP x86_64 Guest is where the issue is occurring.. host is where I'm working from ( x2go client is running) On Guest, I open the Linux Mint update manager. If I need to do nothing more than approve update, everything works as expected. However, if I want to change software sources or perform a version up it fails. Both items require a secondary window to be open, which doesn't happen, at least in x2goclient. Computer in question has no monitor and is only accessed through x2go (my display port adaptor died). Thoughts or suggestions ?

1 0

enable multiple login with the same user
by kanssoune.saliya＠external.tractebel.engie.com 18 Mar '21

18 Mar '21

Hello everyone ! I would like to configure remote login to CentOS 7 servers using x2go and allow multiple login with the same user i.e. many users use the same ID and password to log in at the same time. Does x2go allow it? I explain below a little bit more our infra : * We use NIS as user authentication * We have more than 10 different Linux workstations * Each colleague can connect on every workstations * We use generic account for some purpose i.e. many users use the same ID and password Do you thing that this is possible to configure with x2go? If yes, what are the steps to follow? What desktop environment (MATE, XFCE, GNOME ...) will be best adapted? Thanks! Kanssoune ENGIE Mail Disclaimer: http://www.engie.com/disclaimer/

3 2

800GB log file .xsession-x2go-...-errors
by m.herweg＠gmx.de 16 Mar '21

16 Mar '21

Hi! thank you for creating this nice free software! I tried x2go on Debian 10 server with KDE desktop. Everything worked fine out of the box until 3 days later when I noticed the server disk was full: in /home/dozent: -rw------- 1 dozent dozent 800G Mär 7 12:48 .xsession-x2go-bootserver-neu-errors [19069:19098:0307/002314.670828:ERROR:gl_surface_qt.cpp(296)] eglCreatePbufferSurface failed and surfaceless context not available [19069:19098:0307/002314.670831:ERROR:gl_surface_qt.cpp(303)] Requested OpenGL implementation is not supported. Implementation: 0 [19069:19098:0307/002314.670834:ERROR:gl_surface_qt.cpp(296)] eglCreatePbufferSurface failed and surfaceless context not available [19069:19098:0307/002314.670838:ERROR:gl_surface_qt.cpp(303)] Requested OpenGL implementation is not supported. Implementation: 0 I deleted the file and killed all processes of user "dozent" to free the disk space again. can you give me any advice how to avoid or limit those messages? Thank you!

3 5

Fw: x2go external upstream packages Debian
by andrew glaeser 13 Mar '21

13 Mar '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Begin forwarded message: Date: Sat, 13 Mar 2021 10:31:12 +0100 From: andrew glaeser <bugs(a)irregulaire.info> To: 984721(a)bugs.debian.org Subject: x2go external upstream packages - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 OK, I did check out the upstream packages of x2goserver, because of this bug in handbrake (clearly not a feature in my view, but significantly worsened functionality in an important detail): https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984967 Either I did something wrong there about pinning, or it did not work properly, but my impression is that upstream x2go-packages do no longer exist, i.e. the repository still exists, but will not deliver any new packages for bullseye release: > root@bulls-eye:~# cat /etc/apt/sources.list > # deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 > NETINST 20210301-03:04]/ bullseye main > > #deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 > NETINST 20210301-03:04]/ bullseye main > > deb http://deb.debian.org/debian/ bullseye main non-free contrib > #deb-src http://deb.debian.org/debian/ bullseye main > > deb http://security.debian.org/debian-security bullseye-security main > non-free contrib #deb-src http://security.debian.org/debian-security > bullseye-security main > > # This system was installed using small removable media > # (e.g. netinst, live or single CD). The matching "deb cdrom" > # entries were disabled at the end of the installation process. > # For information about how to configure apt package sources, > # see the sources.list(5) manual. > root@bulls-eye:~# echo "deb http://packages.x2go.org/debian buster extras > main" >> /etc/apt/sources.list root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# apt-key adv --recv-keys --keyserver keys.gnupg.net > E1F958385BFE2B6E Warning: apt-key is deprecated. Manage keyring files in > trusted.gpg.d instead (see apt-key(8)). > Executing: /tmp/apt-key-gpghome.6VPryjaYE5/gpg.1.sh --recv-keys --keyserver > keys.gnupg.net E1F958385BFE2B6E gpg: key E1F958385BFE2B6E: public key "X2go > Debian/Ubuntu Packaging <debian(a)x2go.org>" imported gpg: Total number > processed: 1 gpg: imported: 1 root@bulls-eye:~# apt update > Get:1 http://security.debian.org/debian-security bullseye-security > InRelease [44.1 kB] Get:2 http://deb.debian.org/debian bullseye InRelease > [142 kB] Get:3 http://packages.x2go.org/debian bullseye InRelease [31.2 > kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 > Packages.diff/Index [63.6 kB] Get:5 http://deb.debian.org/debian > bullseye/main Translation-en.diff/Index [63.6 kB] Get:6 > http://packages.x2go.org/debian bullseye/main amd64 Packages [12.6 kB] > Get:7 http://deb.debian.org/debian bullseye/main amd64 Packages > T-2021-03-13-0800.48-F-2021-03-12-0205.53.pdiff [58.1 kB] Get:7 > http://deb.debian.org/debian bullseye/main amd64 Packages > T-2021-03-13-0800.48-F-2021-03-12-0205.53.pdiff [58.1 kB] Get:8 > http://deb.debian.org/debian bullseye/main Translation-en > T-2021-03-13-0200.51-F-2021-03-12-0205.53.pdiff [1,663 B] Get:8 > http://deb.debian.org/debian bullseye/main Translation-en > T-2021-03-13-0200.51-F-2021-03-12-0205.53.pdiff [1,663 B] Get:9 > http://deb.debian.org/debian bullseye/main amd64 DEP-11 Metadata [4,018 kB] > Get:10 http://deb.debian.org/debian bullseye/main DEP-11 48x48 Icons [3,481 > kB] Get:11 http://deb.debian.org/debian bullseye/main DEP-11 64x64 Icons > [7,299 kB] Get:12 http://deb.debian.org/debian bullseye/contrib amd64 > DEP-11 Metadata [13.1 kB] Get:13 http://deb.debian.org/debian > bullseye/contrib DEP-11 48x48 Icons [47.2 kB] Get:14 > http://deb.debian.org/debian bullseye/contrib DEP-11 64x64 Icons [93.3 kB] > Fetched 15.4 MB in 6s (2,684 kB/s) Reading package lists... Done Building > dependency tree... Done Reading state information... Done 25 packages can > be upgraded. Run 'apt list --upgradable' to see them. root@bulls-eye:~# apt > list --upgradable Listing... Done appstream/testing 0.14.2-1 amd64 > [upgradable from: 0.14.1-1] apt-config-icons/testing 0.14.2-1 all > [upgradable from: 0.14.1-1] apt-utils/testing 2.2.1 amd64 [upgradable from: > 2.2.0] apt/testing 2.2.1 amd64 [upgradable from: 2.2.0] > desktop-base/testing 11.0.2 all [upgradable from: 11.0.1] > libappstream4/testing 0.14.2-1 amd64 [upgradable from: 0.14.1-1] > libapt-pkg6.0/testing 2.2.1 amd64 [upgradable from: 2.2.0] > libblockdev-crypto2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-fs2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-loop2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-part-err2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-part2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-swap2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-utils2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libpython3-stdlib/testing 3.9.2-2 amd64 [upgradable from: 3.9.1-1] > liburi-perl/testing 5.08-1 all [upgradable from: 5.07-1] libzstd1/testing > 1.4.8+dfsg-2.1 amd64 [upgradable from: 1.4.8+dfsg-2] mmh/testing 0.4-4 > amd64 [upgradable from: 0.4-2.1] python3-minimal/testing 3.9.2-2 amd64 > [upgradable from: 3.9.1-1] python3-pkg-resources/testing 52.0.0-3 all > [upgradable from: 52.0.0-1] python3/testing 3.9.2-2 amd64 [upgradable from: > 3.9.1-1] vim-common/testing 2:8.2.2434-3 all [upgradable from: > 2:8.2.2434-1] vim-tiny/testing 2:8.2.2434-3 amd64 [upgradable from: > 2:8.2.2434-1] xxd/testing 2:8.2.2434-3 amd64 [upgradable from: > 2:8.2.2434-1] root@bulls-eye:~# aptitude versions x2goserver p > 4.1.0.3-5 testing > 500 root@bulls-eye:~# apt install x2go-keyring && apt update Reading > package lists... Done Building dependency tree... Done > Reading state information... Done > The following NEW packages will be installed: > x2go-keyring > 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded. > Need to get 33.8 kB of archives. > After this operation, 70.7 kB of additional disk space will be used. > Get:1 http://packages.x2go.org/debian bullseye/main amd64 x2go-keyring all > 2019.08.20+git20190820.118+11.main.1 [33.8 kB] Fetched 33.8 kB in 0s (197 > kB/s) Selecting previously unselected package x2go-keyring. > (Reading database ... 164433 files and directories currently installed.) > Preparing to > unpack .../x2go-keyring_2019.08.20+git20190820.118+11.main.1_all.deb ... > Unpacking x2go-keyring (2019.08.20+git20190820.118+11.main.1) ... Setting > up x2go-keyring (2019.08.20+git20190820.118+11.main.1) ... Hit:1 > http://security.debian.org/debian-security bullseye-security InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 > http://packages.x2go.org/debian bullseye InRelease Reading package lists... > Done Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# apt search x2go > Sorting... Done > Full Text Search... Done > arctica-greeter/testing 0.99.1.5-1 amd64 > LightDM Arctica Greeter > > arctica-greeter-remote-logon/testing 0.99.1.5-1 all > LightDM Arctica Greeter - Remote Login Support > > cups-x2go/testing 3.0.1.4-1 all > Virtual X2Go printer for CUPS > > gir1.2-rda-1.0/testing 0.0.5-1 amd64 > GObject introspection data for librda > > libpam-x2go/testing 0.0.2.0-3 amd64 > PAM Module to check credentials against X2Go servers > > libpam-x2go-dev/testing 0.0.2.0-3 amd64 > PAM Module to check credentials against X2Go servers (development files) > > librda-bin/testing 0.0.5-1 amd64 > Remote Desktop Awareness (utility) > > librda-common/testing,now 0.0.5-1 all [installed,automatic] > Remote Desktop Awareness (common files) > > librda-dev/testing 0.0.5-1 amd64 > Remote Desktop Awareness (development headers) > > librda0/testing,now 0.0.5-1 amd64 [installed,automatic] > Remote Desktop Awareness (shared library) > > libx2go-config-perl/testing 4.1.0.3-5 all > Perl X2Go::Config package > > libx2go-log-perl/testing 4.1.0.3-5 all > Perl X2Go::Log package > > libx2go-server-db-perl/testing,now 4.1.0.3-5 amd64 [residual-config] > Perl X2Go::Server:DB package > > libx2go-server-perl/testing 4.1.0.3-5 all > Perl X2Go::Server package > > libx2go-utils-perl/testing 4.1.0.3-5 all > Perl X2Go::Utils package > > lightdm-remote-session-x2go/testing 0.0.2.0-2 amd64 > LightDM Remote Logon Support for X2Go sessions > > pinentry-x2go/testing 0.7.5.10-1+b1 amd64 > OpenPGP (smart)card authentication dialog window for X2Go Client > > pyhoca-cli/testing 0.6.1.2-2 all > Command line X2Go client written in Python > > pyhoca-gui/testing 0.6.1.1-1 all > Graphical X2Go client written in (wx)Python > > python-x2go-doc/testing 0.6.1.3-2 all > Python module providing X2Go client API (documentation) > > python-x2gobroker-doc/testing 0.0.4.3-1 all > X2Go Session Broker (Python3 module documentation) > > python3-x2go/testing 0.6.1.3-2 all > Python module providing X2Go client API (Python 3) > > python3-x2gobroker/testing 0.0.4.3-1 all > X2Go Session Broker (Python3 modules) > > remote-logon-config-agent/testing 0.10-1 all > Retrieve host and session information from remote broker servers > > remote-logon-service/testing 1.0.2.90-3 amd64 > DBus service for tracking available remote logon servers > > x2go-keyring/testing,now 2019.08.20+git20190820.118+11.main.1 all > [installed] GnuPG keys of all X2Go developers and the X2Go archive > > x2gobroker/testing 0.0.4.3-1 all > X2Go Session Broker (executable) > > x2gobroker-agent/testing 0.0.4.3-1 amd64 > X2Go Session Broker (remote agent) > > x2gobroker-agent-dbgsym/testing 0.0.4.3-0x2go1+git20200426.1239+11.main.1 > amd64 debug symbols for x2gobroker-agent > > x2gobroker-authservice/testing 0.0.4.3-1 all > X2Go Session Broker (PAM authentication service) > > x2gobroker-common/testing 0.0.4.3-1 all > X2Go Session Broker (common files) > > x2gobroker-daemon/testing 0.0.4.3-1 all > X2Go Session Broker (standalone daemon) > > x2gobroker-loadchecker/testing 0.0.4.3-1 all > X2Go Session Broker (load checker service) > > x2gobroker-ssh/testing 0.0.4.3-1 amd64 > X2Go Session Broker (SSH broker) > > x2gobroker-ssh-dbgsym/testing 0.0.4.3-0x2go1+git20200426.1239+11.main.1 > amd64 debug symbols for x2gobroker-ssh > > x2gobroker-wsgi/testing 0.0.4.3-1 all > X2Go Session Broker (WSGI) > > x2goclient/testing 4.1.2.2-2 amd64 > X2Go Client application (Qt5) > > x2godesktopsharing/testing 3.2.0.0-2+b1 amd64 > Share X11 desktops with other users via X2Go > > x2goserver/testing 4.1.0.3-5 amd64 > X2Go Server > > x2goserver-common/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (common files) > > x2goserver-desktopsharing/testing 4.1.0.3-5 all > Share X11 desktops with other users via X2Go > > x2goserver-extensions/testing 4.1.0.3-5 all > X2Go Server (extension support) > > x2goserver-fmbindings/testing 4.1.0.3-5 all > X2Go Server (file manager bindings) > > x2goserver-printing/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (printing support) > > x2goserver-x2goagent/testing,now 4.1.0.3-5 amd64 [residual-config] > X2Go Server's X2Go Agent > > x2goserver-xsession/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (Xsession runner) > > x2gothinclient-cdmanager/testing 1.5.0.1-6 amd64 > clientside daemon enabling automatic CD-Rom mounting > > x2gothinclient-cdmanager-dbgsym/testing > 1.5.0.1-0x2go2+git20191129.725+11.main.1 amd64 debug symbols for > x2gothinclient-cdmanager > > x2gothinclient-chroot/testing 1.5.0.1-6 all > Install X2Go Thin Client chroot (metapackage) > > x2gothinclient-common/testing 1.5.0.1-6 all > X2Go thin client environment (common files) > > x2gothinclient-displaymanager/testing 1.5.0.1-6 all > login daemon starting x2goclient in displaymanager mode > > x2gothinclient-management/testing 1.5.0.1-6 all > Management tools for X2Go Thin Client chroot server > > x2gothinclient-minidesktop/testing 1.5.0.1-6 all > Minimal desktop for X2Go Thin Client chroot (based on MATE) > > x2gothinclient-smartcardrules/testing 1.5.0.1-6 all > UDEV rules for smartcard readers > > x2gothinclient-usbmount/testing 1.5.0.1-6 all > clientside usb mass-storage device mounting > > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# aptitude show x2goserver > Package: x2goserver > Version: 4.1.0.3-5 > State: not installed > Priority: optional > Section: x11 > Maintainer: Debian Remote Maintainers <debian-remote(a)lists.debian.org> > Architecture: amd64 > Uncompressed Size: 468 k > Depends: bc, libfile-basedir-perl, libfile-which-perl, libswitch-perl, > libtry-tiny-perl, libx2go-server-perl (< 4.1.0.3-5.1~), > libx2go-server-perl (>= 4.1.0.3-5), lsb-base, lsof, net-tools, > openssh-client, openssh-server, perl, psmisc, pwgen, x2goserver-common (< > 4.1.0.3-5.1~), x2goserver-common (>= 4.1.0.3-5), x2goserver-x2goagent (< > 4.1.0.3-5.1~), x2goserver-x2goagent (>= 4.1.0.3-5), xauth, xkb-data, > debconf (>= 0.5) | debconf-2.0 PreDepends: init-system-helpers (>= 1.54~) > Recommends: fontconfig, sshfs, x11-apps, x11-session-utils, x11-utils, > x11-xfs-utils, x11-xkb-utils, x11-xserver-utils, > x2goserver-extensions (< 4.1.0.3-5.1~), x2goserver-extensions (>= > 4.1.0.3-5), x2goserver-fmbindings (< 4.1.0.3-5.1~), x2goserver-fmbindings > (>= 4.1.0.3-5), x2goserver-printing (< 4.1.0.3-5.1~), x2goserver-printing > (>= 4.1.0.3-5), x2goserver-xsession (< 4.1.0.3-5.1~), > x2goserver-xsession (>= 4.1.0.3-5), xfonts-base, xinit > Suggests: pulseaudio-utils, rdesktop > Breaks: x2godesktopsharing (< 3.1.1.2-0~), x2goserver-compat (< 4.0.1.99~), > x2goserver-home, x2goserver-one, x2goserver-pyhoca (< 4.0.1.99~) > Replaces: x2goserver-compat, x2goserver-home, x2goserver-one, > x2goserver-pyhoca Description: X2Go Server > X2Go is a server based computing environment with > * session resuming > * low bandwidth support > * session brokerage support > * client-side mass storage mounting support > * client-side printing support > * audio support > * authentication by smartcard and USB stick > > This package contains the main daemon and tools for X2Go server-side > session administrations. > Homepage: http://wiki.x2go.org > > > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://security.debian.org/debian-security bullseye-security InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease > Hit:3 http://packages.x2go.org/debian bullseye InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# cat /etc/apt/preferences > Package: * > Pin: origin "packages.x2go.org/debian" > Pin-Priority: 880 > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://deb.debian.org/debian bullseye InRelease > Hit:2 http://security.debian.org/debian-security bullseye-security InRelease > Hit:3 http://packages.x2go.org/debian bullseye InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# apt versions x2goserver > E: Invalid operation versions > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://packages.x2go.org/debian bullseye InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease > Hit:3 http://security.debian.org/debian-security bullseye-security InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# apt-update > -bash: apt-update: command not found > root@bulls-eye:~# apt update > Hit:1 http://deb.debian.org/debian bullseye InRelease > Hit:2 http://security.debian.org/debian-security bullseye-security InRelease > Get:3 http://packages.x2go.org/debian testing InRelease [31.2 kB] > Get:4 http://packages.x2go.org/debian testing/main amd64 Packages [12.6 kB] > Fetched 43.8 kB in 1s (67.6 kB/s) > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# - -----BEGIN PGP SIGNATURE----- iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCYEyGYAAKCRDn6sEfJS3n C3GBAKC1VTnPej9c6tLacav8u9hyM1RMJQCgicKHCYD0akXi6l8nUnpCOBYypfA= =qtoY - -----END PGP SIGNATURE----- -----BEGIN PGP SIGNATURE----- iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCYEyHJgAKCRDn6sEfJS3n C9pvAJ0U5HydF9lO7xzB0+9CBrO/4C5TtwCgs5ZTU1gt/XHfK+iUEW83rg7qQkU= =ZUGF -----END PGP SIGNATURE-----

1 0

Different display ratio at server and client
by Zoltan Tibenszky 10 Mar '21

10 Mar '21

Hello everybody, I would like to use X2Go to get access to my desktop remotely. The server has a two monitor setup and I would like to access this desktop through a laptop. So far the X2Go client has shrunk the display horizontally, which makes it hard to work with it. I am looking for a solution to overcome this issue. Currently both the server and the client runs Xubuntu 20.04 LTS. There are two simple intuitive ways I can think of: 1. show only one monitor and have a bindkey/button to switch between displays 2. open the remote desktop in a window with scrollbars Is there anything similar already implemented? Or are there any other ways to make using remote desktop with different display resolutions practical? Thanks, Zoltan

2 2

Windows 10 Error - X.Org Server did not launch correctly after 4 tries
by Rich Sakalas 03 Mar '21

03 Mar '21

Hello, I am trying to use X2Go to access various servers from my Windows 10 64 Bit laptop. Occasionally it works great. Mostly when trying to start a session I receive the following error: " X.Org Server did not launch correctly after 4 tries. Please check your installation." I'm running Windows 10 Enterprise 64 bit Version 20H2 Build 19042.804. I've tried uninstalling and reinstalling, this does not fix the problem. I've attached the output of the debug log from when I've tried to run it this morning, but I'm having a hard time deciphering it. Any ideas on how to help resolve this would be appreciated, this is a fantastic tool. Thank you, Rich Sakalas

3 2

accessing windows that fall off the screen
by Michael Ashley 27 Feb '21

27 Feb '21

Hi folks, Another question for you: sometimes I reconnect to an x2go session from a computer that has a smaller display than the one that I previous connected from. The problem is that some of the windows now fall partially or fully off the display. The partial ones are usually accessible by clicking and dragging their borders until enough of them appears so that the window can be dragged back in to full view. The usual X11 keystroke/mouse combination for dragging a window isn't passed through to the x2go session, so this only works on the high-level x2go window (presumably there is a way of creating a different keystroke/mouse combination that is passed through). But for windows that fall completely off the screen, I can't see how to access them. Any ideas? I'm using xfce. Regards, Michael

2 4

Help with broken X2go client
by Trevor Jennings 27 Feb '21

27 Feb '21

Hello, I have been using X2go client only iMac connecting to a Debian 10 linux box successfully for about a year. Recently it has stopped working. I get the following message from X2go client: NXPROXY - Version 3.5.99.20 Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com) Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder(a)phoca-gmbh.de> Copyright (c) 2014-2016 Ulrich Sibiller <uli42(a)gmx.de> Copyright (c) 2014-2016 Mihai Moldovan <ionic(a)ionic.de> Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com) NXCOMP, NX protocol compression and NX extensions to this software are copyright of the aforementioned persons and companies. Redistribution and use of the present software is allowed according to terms specified in the file LICENSE.nxcomp which comes in the source distribution. All rights reserved. NOTE: This software has received contributions from various other contributors, only the core maintainers and supporters are listed as copyright holders. Please contact us, if you feel you should be listed as copyright holder, as well. NX protocol compression is derived from DXPC project. Copyright (c) 1995,1996 Brian Pane Copyright (c) 1996,1997 Zachary Vonler and Brian Pane Copyright (c) 1999 Kevin Vigor and Brian Pane Copyright (c) 2000,2003 Gian Filippo Pinzari and Brian Pane All rights reserved. See https://github.com/ArcticaProject/nx-libs for more information. Info: Proxy running in server mode with pid '9440'. Session: Starting session at 'Mon Feb 1 18:24:44 2021'. Info: Using errors file '/Users/trevorj/.x2go/S-trevorj-50-1612203882_stDXFCE_dp32/sessions'. Info: Using stats file '/Users/trevorj/.x2go/S-50/stats'. Loop: WARNING! Overriding auxiliary X11 port with new value '1'. Warning: Overriding auxiliary X11 port with new value '1'. Info: Connecting to remote host 'localhost:59616'. Info: Connected to remote proxy on FD#12. Info: Connection with remote proxy completed.. Loop: WARNING! Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent session. Info: Using ADSL link parameters 1408/24/1/0. Info: Using cache parameters 4/4096KB/8192KB/8192KB. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 4/4. Info: No suitable cache file found. Info: Forwarding X11 connections to display '/private/tmp/com.apple.launchd.MNbJjztkvO/org.xquartz:0'. Info: Forwarding auxiliary X11 connections to display '/private/tmp/com.apple.launchd.MNbJjztkvO/org.xquartz:0'. Session: Session started at 'Mon Feb 1 18:24:44 2021'. Connection timeout, abortingSession: Terminating session at 'Mon Feb 1 18:25:14 2021'. Info: Waiting the cleanup timeout to complete. Session: Session terminated at 'Mon Feb 1 18:25:14 2021'. I have a MacBookAir and that still connects to the same linux box fine via X2go client. I did get a message the other day on my iMac that I could update the version of Xquartz, which I did and continued to use X2go client successfully following this for a while and then X2go client then stopped working when I tried to connect one morning. I have subsequently removed this new version of Xquartz and installed the same version as on my laptop, 2.7.11 but I still am unable to connect. I have also removed X2go client and reinstalled but still no joy. Any hints or ideas would be much appreciated. Many thanksTrevor

1 2

nxagentReconnectFailedFonts: does anyone have a solution?
by Michael Ashley 27 Feb '21

27 Feb '21

Hi folks, Last week I connected to a long-running x2go session using a different computer than I normally do. It worked fine. But later that day when I returned to my usual computer, I ran into the bug where the session would start up, but then disconnect within about a second, with the error messages: > nxagentReconnectFailedFonts: WARNING! Font server tunneling not retrieved. > nxagentReconnectSession: WARNING! Unable to retrieve all the fonts currently in use. Missing fonts have been replaced. A google search shows that this bug was reported 7 years ago, but no solution appears to be forthcoming, apart from trying to adding fonts. But with over 1000 fonts on the server, I have no idea how to find which ones need adding. Are there any ideas out there for how to address this problem? It is certainly frustrating to be unable to connect to a running x2go session, and having to terminate it on the server. Regards, Michael

2 5

script to automatically restart x2go client session after coming out of suspend
by Michael Ashley 26 Feb '21

26 Feb '21

Hi folks, I thought that some of you might be interested in a small script that I use to automatically restart an x2go client session after returning from suspending the client computer: #!/bin/bash while true; do pyhoca-cli -R NEWEST --link wan -g 3768x2123 --pack 16m-png-jpeg-9 user@computer & while ! wmctrl -r X2GO -e 0,0,0,3768,2123; do sleep 1; done echo sleeping sleep 10 wait done The idea is to use pyhoca-cli to handle the connection. The "wait" line waits until the pyhoca-cli subprocess ends, which happens shortly after the computer comes out of suspend. The "wmctrl" line is just to resize the window to fit my display. Change the numbers 3768x2123 to suit. The "sleep 10" I had in there while debugging to avoid runaway creation of sub-processes, which is capable of crashing the x2go server session. The nice thing about this script is that I can be up and running with the x2go client session within less than 10 seconds or so of coming out of suspend, without having to tediously interact with the x2goclient GUI. In turn, this means that there is almost no friction in suspending/resuming my desktop computer, with consequent power savings. The script could be improved by starting a new session if there is no existing one. Regards, Michael

2 1

Re: [X2Go-User] X2GO Crash When Resizing columns in Cliosoft Sos
by Joe 26 Feb '21

26 Feb '21

Feb 23, 2021 6:49:48 PM Ulrich Sibiller <uli42(a)gmx.de>: > > Feb 23, 2021 3:00:23 PM Ulrich Sibiller <uli42(a)gmx.de>: > >> On Tue, Feb 23, 2021 at 8:20 PM Joe W <jsw140(a)hotmail.com> wrote: >>> >>> I am using a program called Cliosoft SOS. It has a window that displays in columns like an Excel file. When I resize one of the columns then my X2GO session window crashes. The start window where I pick which session to start stays running. >>> >>> There is a horizontal scroll bar to move the columns sideways. When I drag that then the X2GO window crashes. >> >> Is that program available for testing? > > I don't know. I will ask them and I will also try your debugger suggestion. The program requires quite a bit of setup before the columns are seen. > >> >>> I have attached the session log and the client debug console output showing a few of these crashes. >> >> The session log looks like a reconnect should be possible. Can you confirm? >> > > I can always reconnect after one of these crashes and see my desktop with ask the programs still running. When I do then I see that my SOS columns have been resized. > >>> Is there some way to fix this or is it a bug that I should report? >> >> It is a bug - nx should not crash. >> >>> Is there any additional information that I should gather? >> >> Well, you could try the following: >> 1. start the session as always. >> 2. start an additional ssh session to the server as the same user or >> root to the server >> 3. run pgrep x2goagent and note the resulting PID (if you have >> multiple session running you will find multiple PIDs and need to >> identify the correct one) >> 4. attach the debugger to the PID: gdb -p PID >> 5. then try to provoke the crash. If it happens the debugger should >> kick in and show a prompt. Run the "bt" in command in the debugger and >> post the output you see. >>> > > I will try this in the next few days. > >>> Anything I should ask the software developer? >> >> Well, as written above a test version that triggers the problem would help. >> >> Uli I tried your debugger suggestion. The first time it told me to run debuginfo-install nxagent-3.5.99.25-4.el7.x86_64 so I did that. Each time after I attach the debugger then my x2go window is frozen so I cannot try changing anything. When I quit the debugger then the x2go window crashes.

3 8

Re: [X2Go-User] Cross-session copy/paste issue
by Jonah Benton 24 Feb '21

24 Feb '21

Hi Uli, Thank you- concur about images- in the past, copy-paste of them only worked within a session, not across. My workaround was to paste-save to /tmp on the host and then open saved image from another session. But nearly all copy-paste for me is text / URLs. Re versions of nxagent: Currently: [admin@localhost ~]$ dnf list installed | grep nx nx-libs.x86_64 3.5.99.26-1.fc33 @updates nxagent.x86_64 3.5.99.26-1.fc33 @updates nxproxy.x86_64 3.5.99.26-1.fc33 @updates Previously version release schedule https://www.spinics.net/lists/fedora-package-announce/msg288622.html * Fri Jun 19 2020 Orion Poplawski <orion@xxxxxxxx> - 3.5.99.24-1 - Update to 3.5.99.24 * Sat Feb 1 2020 Orion Poplawski <orion@xxxxxxxx> - 3.5.99.23-1 - Update to 3.5.99.23 * Wed Jan 29 2020 Fedora Release Engineering <releng@xxxxxxxxxxxxxxxxx> - 3.5.99.22-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild So I was previously running what Fedora calls 3.5.99.24. I can try to downgrade if there is an earlier 3.5.99 on Fedora 33- will that matter? Happy to give a go at a replacement build. I did just note two additional behaviors- 1. cross-session paste does *eventually* complete -copy of text 1 in session 1 -attempt to paste in session 2 -observe session 2 window freeze -switch to host window -paste into host window (success) -select and recopy in host window -switch back to session 2- paste of text 1 had completed So the paste took about 5 seconds 2. cross-session paste payload can be replaced in flight -copy of text 1 in session 1 -switch to session 2 -attempt to paste (text 1 into session 2) -observe session 2 window freeze -switch to another window in session 2 -select and copy text 2 (in another window in session 2) -switch to the session 2 window attempting to complete the original paste -note that the paste completed- but using text 2, not text 1 Thanks again! Jonah On Sun, Feb 21, 2021 at 7:59 AM Ulrich Sibiller <uli42(a)gmx.de> wrote: > Well, I am wondering how you managed to reliably copy/paste images. This > is something the current code does not support. > > Regarding the switch to non-working: you probably have updated the nxagent > package on your server. Please check what was the old version and what you > have installed now. You could try to downgrade again. But please post the > versions here anyway. > > I am still working at a massive clipboard rework which is close to being > finished (I hope...). If you are able to compile it on your own you can > test it. I can assist with instructions > > Uli > > Jonah Benton <jonah(a)jonah.com> schrieb am Sa., 20. Feb. 2021, 20:30: > >> Hi folks, >> >> Let me first say thank you to X2Go maintainers- I happened upon X2Go >> about 6 months ago when figuring out how to switch my workflow from Fedora >> VMs on MacOS to distinct desktop environments on Fedora. It is such a >> profoundly excellent tool. Thank you for your efforts. >> >> Now- to describe a problem that just cropped up, hoping someone can help >> me debug. >> >> I have been running Fedora 32 - XFCE on a Thinkpad, simultaneously >> running 7 distinct local X2Go sessions under 7 different host users. Each >> session's window resides within its own XFCE logical desktop, and I switch >> between them with the switch desktop hotkeys. X2Go sessions are configured >> to support bidirectional copy/paste, and generally it works seamlessly to >> copy text or images from apps in one session's window to another or to/from >> the host. >> >> Last night I upgraded to Fedora 33, with the requisite updates to X2Go. >> Now, copy/paste is reliably broken in one area: >> >> * from host into any session still is fine >> * from session into host still is fine >> * from a session into the same session still is fine >> * from one session into another session no longer works >> >> On failed pastes- where the copy was from one session and the paste is >> another session- when the paste recipient is a browser (Chromium, Firefox, >> whatever), sometimes the recipient browser tab temporarily locks up trying >> (and failing) to retrieve the paste material. >> >> All X2Go sessions are still configured for bi-directional copy-paste. >> >> [admin@localhost ~]$ x2goclient --version >> x2go-WARNING-1> English language requested, not loading translator. >> x2go-WARNING-1> English language requested, not loading translator. >> 4.1.2.2 >> >> [admin@localhost ~]$ x2goversion >> : 3.2.0.0 >> : 4.1.0.3 >> : 4.1.0.3 >> : 3.2.0.0 >> : 4.1.0.3 >> : 3.5.99.26 >> : 4.1.0.3 >> >> Any thoughts on tracking down the issue? >> >> Thanks again, >> >> Jonah >> >> >> >> >> _______________________________________________ >> x2go-user mailing list >> x2go-user(a)lists.x2go.org >> https://lists.x2go.org/listinfo/x2go-user >> >

2 8

X2GO Crash When Resizing columns in Cliosoft Sos
by Joe W 23 Feb '21

23 Feb '21

I am using a program called Cliosoft SOS. It has a window that displays in columns like an Excel file. When I resize one of the columns then my X2GO session window crashes. The start window where I pick which session to start stays running. There is a horizontal scroll bar to move the columns sideways. When I drag that then the X2GO window crashes. I can resize the entire SOS window without any problems. I do not see this sort of behavior in LibreOffice Calc. I have attached the session log and the client debug console output showing a few of these crashes. My client is v. 4.1.2.2 on Windows 10. I am connecting to a CENTOS 7 system running X2GO 4.1.0.3-9 server which came from the Epel repo. Is there some way to fix this or is it a bug that I should report? Is there any additional information that I should gather? Anything I should ask the software developer?

3 2

Cross-session copy/paste issue
by Jonah Benton 20 Feb '21

20 Feb '21

Hi folks, Let me first say thank you to X2Go maintainers- I happened upon X2Go about 6 months ago when figuring out how to switch my workflow from Fedora VMs on MacOS to distinct desktop environments on Fedora. It is such a profoundly excellent tool. Thank you for your efforts. Now- to describe a problem that just cropped up, hoping someone can help me debug. I have been running Fedora 32 - XFCE on a Thinkpad, simultaneously running 7 distinct local X2Go sessions under 7 different host users. Each session's window resides within its own XFCE logical desktop, and I switch between them with the switch desktop hotkeys. X2Go sessions are configured to support bidirectional copy/paste, and generally it works seamlessly to copy text or images from apps in one session's window to another or to/from the host. Last night I upgraded to Fedora 33, with the requisite updates to X2Go. Now, copy/paste is reliably broken in one area: * from host into any session still is fine * from session into host still is fine * from a session into the same session still is fine * from one session into another session no longer works On failed pastes- where the copy was from one session and the paste is another session- when the paste recipient is a browser (Chromium, Firefox, whatever), sometimes the recipient browser tab temporarily locks up trying (and failing) to retrieve the paste material. All X2Go sessions are still configured for bi-directional copy-paste. [admin@localhost ~]$ x2goclient --version x2go-WARNING-1> English language requested, not loading translator. x2go-WARNING-1> English language requested, not loading translator. 4.1.2.2 [admin@localhost ~]$ x2goversion : 3.2.0.0 : 4.1.0.3 : 4.1.0.3 : 3.2.0.0 : 4.1.0.3 : 3.5.99.26 : 4.1.0.3 Any thoughts on tracking down the issue? Thanks again, Jonah

1 0

session.log file fills disk
by David Schumm 28 Jan '21

28 Jan '21

We are seeing this on multiple machines where the session.log file is massive. I've seen them as large as 82gb. When you attempt to open it it says it's a binary file Server is Centos 7 running x2go server 4.1.0.3-9 == This e-mail may contain SEAKR Engineering (SEAKR) Confidential and Proprietary Information. If this message is not intended for you, you are strictly prohibited from using this message, its contents or attachments in any way. If you have received this message in error, please delete the message from your mailbox. This e-mail may contain export-controlled material and should be handled accordingly.

4 3

Client x2go Android ?
by cloud38＠free.fr 21 Jan '21

21 Jan '21

Hello, Is there an x2go Android client for a connection from my smartphone ? Thank you for your help !

4 3

Shared folder fails silently on client side?
by James Bowery 20 Jan '21

20 Jan '21

For some reason the automounted shared folder is no longer being shared. Moreover, manually mounting doesn't work either. Yet there are no error messages in the X2Go CLient status window (Session ID:... Server:... Username:... Display:... Creation time (is blank?) and Status running). I'm not exactly sure where to look on the Ubuntu server for diagnostics, but it seems the client side should not be so silent under both automount and manual mount.

2 7

Single Application session fails
by Chris Green 18 Jan '21

18 Jan '21

I am running x2goclient on my laptop and the x2go server is on my dekstop, both systems are running xubuntu 20.10. Running an xfce session works perfectly but running a single application session doesn't. It appears to work until the application pops up momentarily and then disappears. The application *is* still running but is not displayed. The end of the session.log shows:- Info: keyboard blocking directory created: '/home/chris/.x2go/C-chris-50-1610816188_stRdigikam_> Info: Keycode conversion is off Session: Session started at 'Sat Jan 16 16:56:30 2021'. nxagentImportProperty: WARNING! Failed to convert remote window [79978240] importing property [> WARNING: Invalid window in ClientMessage xclient.window [0x7a6]. WARNING: Invalid window in ClientMessage xclient.window [0x7a6]. WARNING: Invalid window in ClientMessage xclient.window [0x7a6]. WARNING: Invalid window in ClientMessage xclient.window [0x7a6]. WARNING: Invalid window in ClientMessage xclient.window [0x7a6]. WARNING: Invalid window in ClientMessage xclient.window [0x4a00072]. WARNING: Invalid window in ClientMessage xclient.window [0x4a00072]. WARNING: Invalid window in ClientMessage xclient.window [0x4a0007b]. WARNING: Invalid window in ClientMessage xclient.window [0x4a0007b]. WARNING: Invalid window in ClientMessage xclient.window [0x4a00082]. WARNING: Invalid window in ClientMessage xclient.window [0x4a00082]. Does this indicate what the problem might be? -- Chris Green

2 7

pyhoca-cli seems very broken on xubuntu 20.10
by Chris Green 18 Jan '21

18 Jan '21

Having fixed the missing python3-invoke module pyhoca-cli now crashes in all sorts of other ways on my xubuntu 20.10 system. These sessions run fine when called from x2goclient, I just want to script them in order to run a couple of things before the x2go session. This is calling an xfce session, i.e. a full desktop:- chris$ pyhoca-cli esprimo Traceback (most recent call last): File "/usr/bin/pyhoca-cli", line 439, in <module> parser, args = parseargs() File "/usr/bin/pyhoca-cli", line 397, in parseargs ssh_host = ssh_config.lookup(a.server) File "/usr/lib/python3/dist-packages/paramiko/config.py", line 223, in lookup options = self._lookup(hostname=hostname) File "/usr/lib/python3/dist-packages/paramiko/config.py", line 250, in _lookup or self._does_match( File "/usr/lib/python3/dist-packages/paramiko/config.py", line 389, in _does_match passed = invoke.run(exec_cmd, hide="stdout", warn=True).ok File "/usr/lib/python3/dist-packages/invoke/__init__.py", line 48, in run return Context().run(command, **kwargs) File "/usr/lib/python3/dist-packages/invoke/context.py", line 94, in run return self._run(runner, command, **kwargs) File "/usr/lib/python3/dist-packages/invoke/context.py", line 101, in _run return runner.run(command, **kwargs) File "/usr/lib/python3/dist-packages/invoke/runners.py", line 363, in run return self._run_body(command, **kwargs) File "/usr/lib/python3/dist-packages/invoke/runners.py", line 411, in _run_body self.start(command, self.opts["shell"], self.env) File "/usr/lib/python3/dist-packages/invoke/runners.py", line 1271, in start self.process = Popen( File "/usr/lib/python3.8/subprocess.py", line 854, in __init__ self._execute_child(args, executable, preexec_fn, close_fds, File "/usr/lib/python3.8/subprocess.py", line 1637, in _execute_child self.pid = _posixsubprocess.fork_exec( AttributeError: 'NoneType' object has no attribute 'fork_exec' This is runnning a single application:- chris$ pyhoca-cli Digikam pyhoca-cli[19161] NOTICE: preparing requested X2Go session pyhoca-cli[19161] (PyHocaCLI) NOTICE: preparing requested X2Go session pyhoca-cli[19161] (x2gosessregistry-pylib) NOTICE: registering X2Go session Pyhoca-Client_Session... pyhoca-cli[19161] (x2goclient-pylib) NOTICE: initializing X2Go session... pyhoca-cli[19161] (x2gocontrolsession-pylib) NOTICE: connecting to [Digikam]:22 Traceback (most recent call last): File "/usr/bin/pyhoca-cli", line 454, in <module> thisPyHocaCLI.authenticate() File "/usr/lib/python3/dist-packages/pyhoca/cli/frontend.py", line 532, in authenticate self._X2GoClient__connect_session(self.x2go_session_hash, username=_username, password=password, passphrase=passphrase, force_password_auth=force_password_auth) File "/usr/lib/python3/dist-packages/x2go/client.py", line 1392, in connect_session _success = self.session_registry(session_uuid).connect(username=username, File "/usr/lib/python3/dist-packages/x2go/session.py", line 1387, in connect self.connected = self.control_session.connect(self.server, File "/usr/lib/python3/dist-packages/x2go/backends/control/plain.py", line 1031, in connect paramiko.SSHClient.connect(self, _hostname, port=port, username=username, pkey=None, password=passphrase, File "/usr/lib/python3/dist-packages/paramiko/client.py", line 340, in connect to_try = list(self._families_and_addresses(hostname, port)) File "/usr/lib/python3/dist-packages/paramiko/client.py", line 203, in _families_and_addresses addrinfos = socket.getaddrinfo( File "/usr/lib/python3/dist-packages/gevent/_socketcommon.py", line 212, in getaddrinfo addrlist = get_hub().resolver.getaddrinfo(host, port, family, type, proto, flags) File "/usr/lib/python3/dist-packages/gevent/resolver/thread.py", line 65, in getaddrinfo return self.pool.apply(_socket.getaddrinfo, args, kwargs) File "/usr/lib/python3/dist-packages/gevent/pool.py", line 159, in apply return self.spawn(func, *args, **kwds).get() File "src/gevent/event.py", line 268, in gevent._event.AsyncResult.get File "src/gevent/event.py", line 296, in gevent._event.AsyncResult.get File "src/gevent/event.py", line 286, in gevent._event.AsyncResult.get File "src/gevent/event.py", line 266, in gevent._event.AsyncResult._raise_exception File "src/gevent/event.py", line 211, in gevent._event.AsyncResult.exc_info.__get__ File "/usr/lib/python3/dist-packages/gevent/_tblib.py", line 371, in g return f(a) File "/usr/lib/python3/dist-packages/gevent/_tblib.py", line 432, in load_traceback return loads(s) File "/usr/lib/python3/dist-packages/gevent/_tblib.py", line 337, in unpickle_traceback return ret.as_traceback() File "/usr/lib/python3/dist-packages/gevent/_tblib.py", line 202, in as_traceback code = CodeType( TypeError: an integer is required (got type bytes) -- Chris Green

2 2

x2go session crashes xfwm4
by Chris Green 18 Jan '21

18 Jan '21

I've recently upgraded my system to xubuntu 20.10 and x2go sessions now crash the xfwm4 window manager. After restarting xfwm4 from a terminal window I see the following crash report when I run another x2go session:- xfwm4:15183): Gdk-ERROR **: 11:27:33.867: The program 'xfwm4' received an X Window System error. This probably reflects a bug in the program. The error was 'XSyncBadAlarm'. (Details: serial 213260 error_code 135 request_code 134 (SYNC) minor_code 11) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) Trace/breakpoint trap (core dumped) Is this a bug in xfwm4 or in x2go? -- Chris Green

2 2

Missing dependency for pyhoca-cli
by Chris Green 18 Jan '21

18 Jan '21

I just installed (using synaptic, i.e. apt) pyhoca-cli on my xubuntu 20.10 system and it dies with a ModuleNotFoundError :- chris$ pyhoca-cli esprimo Traceback (most recent call last): File "/usr/bin/pyhoca-cli", line 439, in <module> parser, args = parseargs() File "/usr/bin/pyhoca-cli", line 397, in parseargs ssh_host = ssh_config.lookup(a.server) File "/usr/lib/python3/dist-packages/paramiko/config.py", line 223, in lookup options = self._lookup(hostname=hostname) File "/usr/lib/python3/dist-packages/paramiko/config.py", line 250, in _lookup or self._does_match( File "/usr/lib/python3/dist-packages/paramiko/config.py", line 387, in _does_match raise invoke_import_error File "/usr/lib/python3/dist-packages/paramiko/config.py", line 36, in <module> import invoke ModuleNotFoundError: No module named 'invoke' Easily fixed by installing python3-invoke but presumably there's a missing dependency. However see my other report - pyhoca-cli seems very broken on xubuntu 20.10. -- Chris Green

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user