- x2go-user - X2Go ListServ

Howto get full access with x2godesktopsharing
by Buddy Butterfly 27 Jul '13

27 Jul '13

Hi all, first, thanks a lot for the great product. I recently discovered and installed it and it worked! With the help of this forum I was also able to do desktopsharing. Two issues are open: 1. How to get full access with x2godesktopsharing? 2. Directory mapping is not working. I add a directory in the client config but can not see the directory in /tmp on the server. Thanks an best regards, Matt

2 1

X2Go and ssh forwarding
by Andreas Yankopolus 27 Jul '13

27 Jul '13

I'm trying to figure out how to use X2Go to connect with a machine at a private IP address via a public ssh server. I'm currently using ssh authentication forwarding to get to that machine: ssh -A -t andreas(a)public.ip.address ssh -A andreas(a)private.ip.address Thanks, Andreas

3 9

Session resume fails with AFS home directories
by Sebastian Flothow 26 Jul '13

26 Jul '13

Hi all, I've just set up a Debian 7 box with X2Go. It does work in that it is possible to start new sessions, however, resuming a previous session does not work, it always results in this message: "The remote proxy closed the connection while negotiating the session. This may be due to the wrong authentication credentials passed to the server." I suspect this is due to the fact that home directories are stored in AFS (for regular users, that is; when logging in as root, whose home directory is on a local ext4 FS, resume does work). Accessing AFS requires an AFS token in the user's name, obtaining this in turn requires a Kerberos ticket. PAM is set up to obtain both automatically on login, but I guess something goes wrong there during session resume. Is it possible to add custom commands to the X2Go login/resume procedure? It would be quite helpful if the client could run klist and tokens through the ssh session, and either log or display the output. Thanks, Sebastian

2 1

Sharing the display between two different users in x2go remove session (xhost + / DISPLAY variable)
by Nigra Truo 18 Jul '13

18 Jul '13

Hi, I am logged in as user Tom via x2go on my server. And in this session, I su to user Peter and want Peter to be able to use the same X session, i.e. display GUIs. When I try this, it fails. I use xeyes as a test. Error: Can't open display: unix:1077.0 I used already xhost (as Tom), to give everybody the right to use Tom's X display. xhost + access control disabled, clients can connect from any host when I do a echo $DISPLAY as user Tom, I get: :75 If I do the same as user Peter, I get: unix:1077.0 how can I get user Peter to be able to share the GUI / X remote session via x2go from Tom? How is x2go handling the DISPLAY variable? I think there lies the problem, not in the permissions. What circumstance makes me need to get this working: I cannot open a separate x2go session for user Peter, which would definitely be easier. I have tried this locally, on the server directly, and when I use xhost + and set the display variable of Peter to the same as Tom, he can use Tom's display and display xeyes. Any pointers would be appreciated! thanks Markus

2 1

X2go keyboard layout
by Nicolas Fabre 15 Jul '13

15 Jul '13

Hi all, I struggled a little bit with keyboard layouts in x2go. I found a way to enable numpad on a gnome 3.4.2 session (on debian Wheezy). I will try to make a traduction from my french version : go to system settings -> keyboard -> keyboard layout options -> Miscellaneous compatibility options -> numpad keys are always numerical (really not sure about this one). Ask if you need to. Cheers -- Nicolas FABRE

1 0

Re: [X2Go-User] Failure negotiating the session in stage '7'. Wrong version or invalid session authentication cookie.
by Roland Giesler 15 Jul '13

15 Jul '13

On Thu, Jul 11, 2013 at 8:07 PM, Kjell Otto <otto.kjell(a)gmail.com> wrote: > Have you tried to delete the .Xauthority File in the users Homefolder? I have now. On the client I log: Loop: PANIC! The remote NX proxy closed the connection. Loop: PANIC! Failure negotiating the session in stage '7'. Loop: PANIC! Wrong version or invalid session authentication cookie. On the server, the session log shows: running as X2Go Agent NXAGENT - Version 3.5.0 Copyright (C) 2001, 2011 NoMachine. See http://www.nomachine.com/ for more information. Info: Agent running with pid '2543'. Session: Starting session at 'Mon Jul 15 11:50:05 2013'. Info: Proxy running in server mode with pid '2543'. Info: Waiting for connection from 'localhost' on port '30001'. Warning: Refusing connection from '192.168.1.3'. Error: Connection with remote host 'localhost' could not be established. Error: Aborting session with 'Unable to open display 'nx/nx,options=/home/roland/.x2go/C-roland-50-1373881804_stDUNITY_dp24/options:50''. Session: Aborting session at 'Mon Jul 15 11:50:55 2013'. Session: Session aborted at 'Mon Jul 15 11:50:55 2013'. This makes me think. I port forward port 22 through the ADSL router (which has 192.168.1.1 as LAN ethernet address and the server has 192.168.1.3). Could this have something to do with the problem? What is port 30001 used for and should I allow that through the firewall? Surely port 22 should be enough? I have also turned apparmor off, but it makes no difference. thanks again Roland > > Please Try that first. Your log seems to be completely normal so far... Do > you have a Desktop you can shadow to? I mean if there is no MasterSession > opened, then you can't shadow it... > > Best regards, > Kjellski > > > 2013/7/11 Roland Giesler <roland(a)giesler.za.net> >> >> On Thu, Jul 11, 2013 at 9:22 AM, Kjell Otto <otto.kjell(a)gmail.com> wrote: >> > Hi Roland, >> > >> > have you seen what's mentioned here: >> > >> > http://developer.berlios.de/bugs/?func=detailbug&bug_id=18258&group_id=2978 >> >> Here's what my server log has. >> >> Jul 11 15:14:54 Ashton /usr/bin/x2golistdesktops[30895]: >> x2golistdesktops has been called without options >> Jul 11 15:14:54 Ashton /usr/bin/x2golistsessions[30899]: >> x2golistsessions has been called with options: x2goserver >> Jul 11 15:14:58 Ashton /usr/bin/x2gostartagent: x2gostartagent called >> with options: 1440x900 adsl 16m-jpeg-9 unix-kde-depth_24 us pc105/us 1 >> S 1XSHADrolandXSHAD:0 >> Jul 11 15:14:58 Ashton /usr/bin/x2gosessionlimit[30961]: >> x2gosessionlimit has been called >> Jul 11 15:14:58 Ashton /usr/bin/x2golistsessions[30964]: >> x2golistsessions has been called with options: --all-servers >> Jul 11 15:14:59 Ashton /usr/bin/x2gofeature: x2gofeature called with >> options: X2GO_RUN_EXTENSIONS >> Jul 11 15:14:59 Ashton >> /usr/share/x2go/x2gofeature.d/x2goserver-extensions.features: >> x2goserver-extensions.features called with options: >> X2GO_RUN_EXTENSIONS >> Jul 11 15:15:00 Ashton /usr/bin/x2goserver-run-extensions: >> x2goserver-run-extensions called with options: >> roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24 pre-start >> Jul 11 15:15:00 Ashton /usr/bin/x2gostartagent: successfully started >> X2Go agent session with ID >> roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24 >> Jul 11 15:15:00 Ashton /usr/bin/x2gofeature: x2gofeature called with >> options: X2GO_RUN_EXTENSIONS >> Jul 11 15:15:00 Ashton >> /usr/share/x2go/x2gofeature.d/x2goserver-extensions.features: >> x2goserver-extensions.features called with options: >> X2GO_RUN_EXTENSIONS >> Jul 11 15:15:00 Ashton /usr/bin/x2goserver-run-extensions: >> x2goserver-run-extensions called with options: >> roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24 post-start >> Jul 11 15:15:00 Ashton /usr/bin/x2gostartagent: blocking creation of >> agent's keyboard file >> >> /home/roland/.x2go/C-roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24/keyboard >> as requested by session startup command >> Jul 11 15:15:52 Ashton /usr/bin/x2goumount-session[31487]: >> x2goumount-session has been called with options: >> roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24 >> Jul 11 15:15:54 Ashton /usr/bin/x2goumount-session[31524]: >> x2goumount-session has been called with options: >> roland-50-1373548499_stS1XSHADrolandXSHADPP0_dp24 >> Jul 11 15:17:01 Ashton CRON[31876]: (root) CMD ( cd / && run-parts >> --report /etc/cron.hourly) >> Jul 11 15:19:46 Ashton /usr/bin/x2golistdesktops[428]: >> x2golistdesktops has been called without options >> Jul 11 15:19:46 Ashton /usr/bin/x2golistsessions[432]: >> x2golistsessions has been called with options: x2goserver >> Jul 11 15:19:52 Ashton /usr/bin/x2gostartagent: x2gostartagent called >> with options: 1440x900 adsl 16m-jpeg-9 unix-kde-depth_24 us pc105/us 1 >> S 1XSHADrolandXSHAD:0 >> Jul 11 15:19:52 Ashton /usr/bin/x2gostartagent: client announced >> itself as ,,105.237.13.183'' >> Jul 11 15:19:52 Ashton /usr/bin/x2gostartagent: shadow session >> requested: mode 1, user: roland, desktop: :0 >> Jul 11 15:19:52 Ashton /usr/bin/x2gosessionlimit[496]: >> x2gosessionlimit has been called >> Jul 11 15:19:52 Ashton /usr/bin/x2golistsessions[499]: >> x2golistsessions has been called with options: --all-servers >> Jul 11 15:19:52 Ashton /usr/lib/x2go/x2gogetdisplays[513]: >> db_getdisplays called, server: Ashton; return value: >> Jul 11 15:19:52 Ashton /usr/lib/x2go/x2gogetports[523]: db_getports >> called, server: Ashton; return value: >> Jul 11 15:19:53 Ashton /usr/lib/x2go/x2goinsertsession[550]: >> db_insertsession called, session ID: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24, server: Ashton, >> session ID: roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24 >> Jul 11 15:19:53 Ashton /usr/lib/x2go/x2goinsertport[562]: >> db_insertport called, session ID: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24, server: Ashton, SSH >> port: 30001 >> Jul 11 15:19:53 Ashton /usr/lib/x2go/x2goinsertport[574]: >> db_insertport called, session ID: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24, server: Ashton, SSH >> port: 30002 >> Jul 11 15:19:53 Ashton /usr/lib/x2go/x2goinsertport[587]: >> db_insertport called, session ID: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24, server: Ashton, SSH >> port: 30003 >> Jul 11 15:19:53 Ashton /usr/bin/x2gofeature: x2gofeature called with >> options: X2GO_RUN_EXTENSIONS >> Jul 11 15:19:53 Ashton >> /usr/share/x2go/x2gofeature.d/x2goserver-extensions.features: >> x2goserver-extensions.features called with options: >> X2GO_RUN_EXTENSIONS >> Jul 11 15:19:53 Ashton /usr/bin/x2goserver-run-extensions: >> x2goserver-run-extensions called with options: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24 pre-start >> Jul 11 15:19:53 Ashton /usr/bin/x2gostartagent: successfully started >> X2Go agent session with ID >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24 >> Jul 11 15:19:53 Ashton /usr/bin/x2gofeature: x2gofeature called with >> options: X2GO_RUN_EXTENSIONS >> Jul 11 15:19:54 Ashton >> /usr/share/x2go/x2gofeature.d/x2goserver-extensions.features: >> x2goserver-extensions.features called with options: >> X2GO_RUN_EXTENSIONS >> Jul 11 15:19:54 Ashton /usr/bin/x2goserver-run-extensions: >> x2goserver-run-extensions called with options: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24 post-start >> Jul 11 15:19:54 Ashton /usr/lib/x2go/x2gocreatesession[680]: >> db_createsession called, session ID: >> roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24, cookie: >> 99946d36e5e8848f5f91951d5c1c6f67, client: xxx.yyy.13.183, pid: 645, >> graphics port: 30001, sound port: 30002, file sharing port: 30003 >> Jul 11 15:19:54 Ashton /usr/bin/x2gostartagent: blocking creation of >> agent's keyboard file >> >> /home/roland/.x2go/C-roland-50-1373548792_stS1XSHADrolandXSHADPP0_dp24/keyboard >> as requested by session startup command >> >> That last line: Is that because of the error, or is it causing the error? >> >> thanks >> >> Roland >> >> >> > >> > Wether it helps or not, it would be great to see the server side of >> > this, so >> > please post the corresponding entries of your /var/log/syslog after >> > configuring the x2goserver for debugging(set it in >> > /etc/x2go/x2goserver.conf). >> > >> > Nevertheless, the only Cookies I can think used by x2go are the MIT >> > magic >> > cookies of X... maybe try to delete the .Xauthority of the user trying >> > to >> > log in and retry... >> > >> > Greetings, >> > @Kjellski >> > >> > >> > 2013/7/10 Roland Giesler <roland(a)giesler.za.net> >> >> >> >> I must have read every mailing list and other posts I could find on >> >> Google regarding this problem. Nowhere was anyone able to identify >> >> the actual cause and fix for this problem. >> >> >> >> How can this be? Does anyone know where the X2Go developer(s) hang >> >> out? >> >> >> >> thanks >> >> >> >> Roland Giesler >> >> +27 (0)72-450-2817 >> >> http://www.giesler.za.net >> >> >> >> Disclaimer: The sender invokes the rule of "exemptus responsibilitus" >> >> pertaining to caffeine soluted inductions and/or decantations thereof >> >> into tactile communication interfaces and alternative apparatuses with >> >> respect to personal computation devices or otherwise implementations >> >> of electronic and/or bionic devices. This impartation is intended for >> >> the addressed party, unless conditions contrary to the aforementioned >> >> exist, in which case it is pertinent. Reduce without further ado to >> >> nothingness said impartation; alternatively "refrain from traversing >> >> the point of origination, be not enriched by 200 Randus and proceed >> >> without delay to enjailment". >> >> >> >> >> >> On Thu, Jul 4, 2013 at 10:25 PM, Roland Giesler <roland(a)giesler.za.net> >> >> wrote: >> >> > bump. >> >> > >> >> > anyone with help? >> >> > >> >> > On Mon, Jul 1, 2013 at 11:36 PM, Roland Giesler >> >> > <roland(a)giesler.za.net> >> >> > wrote: >> >> >> This error is most annoying to say the least, since no-where on the >> >> >> internet is an explaination of the cause nor the fix for it. Some >> >> >> people seem to have managed to get past it by luck. >> >> >> >> >> >> This is an Ubuntu 12.04 64bit server that had nxserver install. One >> >> >> day (probably after some update, but it was too long ago to undo of >> >> >> trace now) the nxclient just stopped working. >> >> >> >> >> >> I left it after many futile attempt to fix it. I have completely >> >> >> removed (purged) openssh-server and nxserver, nxnode and nxclient. >> >> >> Numerous times, apart from creating keys manually and more. >> >> >> >> >> >> So I though, let me switch to X2Go. And lo and behold, I get the >> >> >> same >> >> >> error. >> >> >> >> >> >> Strangely enough though, I can connect perfect to the server via SSH >> >> >> every time. >> >> >> >> >> >> What causes this and how does one fix this please? >> >> >> >> >> >> regards >> >> >> >> >> >> Roland >> >> _______________________________________________ >> >> X2Go-User mailing list >> >> X2Go-User(a)lists.berlios.de >> >> https://lists.berlios.de/mailman/listinfo/x2go-user >> > >> > > >

1 0

Failure negotiating the session in stage '7'. Wrong version or invalid session authentication cookie.
by Roland Giesler 11 Jul '13

11 Jul '13

This error is most annoying to say the least, since no-where on the internet is an explaination of the cause nor the fix for it. Some people seem to have managed to get past it by luck. This is an Ubuntu 12.04 64bit server that had nxserver install. One day (probably after some update, but it was too long ago to undo of trace now) the nxclient just stopped working. I left it after many futile attempt to fix it. I have completely removed (purged) openssh-server and nxserver, nxnode and nxclient. Numerous times, apart from creating keys manually and more. So I though, let me switch to X2Go. And lo and behold, I get the same error. Strangely enough though, I can connect perfect to the server via SSH every time. What causes this and how does one fix this please? regards Roland

2 3

Need to remap ONE key ('p')
by Barnet Wagman 11 Jul '13

11 Jul '13

I have an x2go client-server configuration that works perfectly /except/ the that the letter lowercase 'p' does not appear when typed. Can someone tell my how to remap a single key? Here's my configuration: Server: Debian wheezy xfce4 x2goserver 4.0.1.3-0 Client: OS X 10.7.5 MacPorts x2goclient.app 4.0.1.0 thanks

2 1

Re: [X2Go-User] Sharing the display between two different users in x2go remove session
by Nigra Truo 11 Jul '13

11 Jul '13

Hi, I forgot to mention an important point on my setup: User Peter is in a chroot, while user Tom is not (on the main host, where the chroot is running). In a X2go session, I can use the same display when I do a xhost + and set the DISPLAY variable for the second user to the same as first user, but when I do that for the chroot user Peter, to be able to use Toms display, it does not work. What special steps are required to make this possible for chroot? I tried to install x2goserver in the chroot, set the port for ssh to 23, but I cannot log in that way to Peter. Thanks, Markus

1 0

Problems with meta characters on Mac client
by Anders Bruun Olsen 09 Jul '13

09 Jul '13

Hi, I can't seem to figure out how to make x2goclient send characters such as | (pipe) and @ to my terminalserver, when connected from a Mac client. It works fine from a Linux client. My terminalserver is running XFCE on Ubuntu with latest x2goserver and x2goclient 4.0.1.0 on OSX 10.8 with danish keyboard layout. I have tried changing layouts in the XFCE settings, but that just results in all keyboard input being scrambled around. When I set it back to "system standard" most keys work correctly, except stuff that requires meta-keys. Pipe on danish Mac is alt+i, which logically just produces the alt+i effect in XFCE. @ is alt+' (next to enter) on a danish mac keyboard. This produces nothing in XFCE. Any hints for how to at least be able to produce those characters in an x2goclient session? Even better would of course be a full keyboard-solution for Mac-users, but that might be tough, given the fundamental differences between PC and Mac keyboards :) -- Anders Bruun Olsen It-ansvarlig Det Danske Sprog- og Litteraturselskab (Society for Danish Language and Literature)

2 1

Re: [X2Go-User] Black screen for existing session
by Karel 08 Jul '13

08 Jul '13

No I must say, it's unstable under linux too, not only win7. My server side is with automatic updates switched on and I see multiple times in week a notifications about that. Sometimes it will suggest me to reboot my computer to update but I will not do it before weekend - somewhere in the saturday evening but not at every week. My linux client side is with automatic updates turned off and I will update it manually at friday afternoon (if I remember to do it and if I have a time to do it) before turning off for the weekend. So it is very hard to tell which updates and at which side was a cause of the problems. Windows client is updated very rarely. But somewhere at last two weeks I started to see problems connecting to suspended x2go sessions. After then I updated also windows client but no better stability. If I connect from linux client it will disconnect me after I try to connect to my suspended session (for a moment I can see my desktop and sometimes I can click something and run a command or two). Every time I see my suspended session (with ID number) so I will assume my login was correct. After few retries (number of times differ from day to day) I will get a connection and it is stable until evening then I disconnect it before going home. At home I will connect from windows client and also there is login correct because I see my suspended session with ID number (sometimes it is not 50 but over that but this is a same until I must make a new session). If I try to resume this session I will sometimes see my desktop for a few seconds (and sometimes I can click and run a command or two) but it will disconnect me again saying something about my incorrect credentials. After few retries I will get my session and this is stable until i disconnect it later. PyHoca-GUI is more stable and with this I can reconnect better. I have'nt used windows x2go-client for a last week or two anymore. But there are also cases there after a few unsuccessfull reconnections PyHoca-GUI will not show my suspended session anymore and I must start a new one. And there is a new session at the server - the old one is gone with all related programs closed.

3 7

multiple xorg.conf's in x2go TCE
by Stephan Wagner 26 Jun '13

26 Jun '13

We use the 'hostname' to distinguish the xorg.conf's for different thin clients. The attached init-script 'x2gohostname' replaces the default 'hostname' with the ethernet address of the network device eth0. Colons are replaced by dashes. Xorg will search the xorg.conf.<hostname> file in the directory /usr/etc/X11/, which correspond to /opt/x2gothinclient/chroot/usr/etc/X11/ in the PXE-boot environment. The init-script goes to /opt/x2gothinclient/chroot/etc/init.d/. Enter the chroot-environment executing 'x2gothinclient_shell'. 'update-rc.d x2gohostname defaults' will generate the symlinks for the different run-levels. Hope this helps someone, Stephan -- __________________________________________________ Dr. Stephan Wagner ITos GmbH Bitzi-Bendel 2555 9642 Ebnat-Kappel Tel: +41 (0)71 990 05 94 mailto:swagner@itos-gmbh.com http://www.itos-gmbh.com --------------------------------------------------

2 1

git from NX-Library and compile e install x2go from de source
by carlos andres perez lopez 24 Jun '13

24 Jun '13

HI all, I following this guide to compile and install x2go server in a mandriva 2010.0 version http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:x2goserver but when i try to git clone the nx library ( http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:nx-libs) i have this error: fatal: destination path 'nxcomp' already exists and is not an empty directory. is the same problem for xccommpext and nxcompshad so i do a search in the web-git and found the nxlibrarys in this url ( http://code.x2go.org/releases/source/nx-libs/) so i compile and install one by one from this repository. Now, in this moment i try to do the 12 point compile and install x2goserver from git, but when i do a make comand, the sistem block in this part for man_page in 'cd man && fin * -type f'; do man2html man/$man_pag > .build_man2html/html/$man_page.html;done and noting happend. can any helpme? -- todo se puede mi warrior C.A.P.L

1 0

Capture client-side error messages?
by Barnet Wagman 22 Jun '13

22 Jun '13

I'm attempting to setup x2go with Debian (wheezy) on an ec2-instance and the OS X client (this is my first attempt to use x2go). I'm getting error messages, but the window that displays them closes after a one or two seconds, so I can't read them. Is there a way to log the error messages with the OS X client? Or to keep the window open? thanks

2 1

Capture client-side error messages?
by Barnet Wagman 21 Jun '13

21 Jun '13

I'm attempting to setup x2go with Debian (wheezy) on an ec2-instance. When I attempt to connect with the x2go client, I get error messages, but the window on the client that displays them closes after a couple of seconds, so I can't read them. This happens with both the OS X client and the linux client (on Debian). Is there a way to log the error messages? Or to keep the window open? thanks

1 0

Arrow keys problems with openSUSE
by Carlos 19 Jun '13

19 Jun '13

Hello, I'm having the problem with arrow keys, i.e. when I press the down array key it's translated to the return key. I've tried with the command x2gosetkeyboard in the server-side but It didn't work. I'm using openSUSE 12.3 on both machines(server and client) I have configured KDE with spanish keyboard layout and pc105/es keyboard type in both machines. In x2goclient I have unchecked the option "Keep current keyboard Settings" (checked doesn't work either). The values here are: Keyboard layout:es Keyboard model: pc105/es Regards. Carlos

2 4

Future kerberos support?
by Dejan Panič 17 Jun '13

17 Jun '13

Hello Are there any plans to add Kerberos support to x2go in the future? Regards, Dejan

1 0

Black screen for existing session
by Rui Cruz 17 Jun '13

17 Jun '13

Hi there, After the recent Ubuntu update of x2go I'm having some problems with my windows client on Windows 7: Everytime I try to resume a session the screen goes completly dark, even the x2go logo dosn't appear. The only way I can regain graphics is to terminate the session and start it again. I try then to update the Client to the last on the site and the problem is still hapening. Sometimes I run the install for Windows and the problem is solved but this seems a question of "luck" since this dosn't allways solve the problem. The server is using gnome. also, I try to decrease the bandwith and image quality in the session options but didn't work and even create a new Windows profile and run a fresh x2go profile. Any ideas on how to fix this? -- Rui Cruz Journalist +351 96 827 1502

3 4

How are connection failures handled?
by Barnet Wagman 14 Jun '13

14 Jun '13

I need to know how connections failure are handled by x2go. E.g. Suppose a session is running a gui application (such as Netbeans) in gnome on the server, and the connection is lost. Is the application killed? Or is it possible to reconnect to the same session? thanks PS if there's any documentation on this sort of thing, I'd like to know where to find it - I haven't been able to locate any.

2 1

How are connection failures handled?
by Barnet Wagman 14 Jun '13

14 Jun '13

I need to know how connections failure are handled by x2go. E.g. Suppose a session is running a gui application (such as Netbeans) in gnome on the server, and the connection is lost. Is the application killed? Or is it possible to reconnect to the same session? thanks PS if there's any documentation on this sort of thing, I'd like to know where to find it - I haven't been able to locate any.

1 0

Screen resolution
by Paul van der Vlis 07 Jun '13

07 Jun '13

Hello, When I connect to a X2go server I get a screen with the resolution of the server and not the resolution what I choose on the client. Is there something to do against this behavior? With regards, Paul van der Vlis. -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl

4 11

X2go-broker user/password twice
by Juan Carlos Corchado 05 Jun '13

05 Jun '13

Hi all, The x2go-broker configuration is working correctly but when I try the command x2goclient --broker-url=http://server:8080/plain/inifile/ and set the name and password appears another window to select KDE or GNOME (my configuration). When I choose one of them I have to set again the user and password. It's possible to put it just once? Thanks,

3 5

X2go-broker problem
by Juan Carlos Corchado 04 Jun '13

04 Jun '13

Hi all, I need to install a load balancing system and I know that is possible with x2go-broker. I have already installed and configured x2go-broker on a server and when I try to inicialice the app with this command: x2goclient --broker-url=http://server:8080/plain/inifile/ It is open in two windows. One with the toolbar and another one with the desktop. I tried to modify some options in /etc/x2go/broker/x2gobroker-sessionprofiles.conf but I have no success. ------------------------x2gobroker-sessionprofiles.conf......................... [DEFAULT] command=TERMINAL defsndport=true useiconv=false iconvfrom=UTF-8 #height=600 export= quality=9 fullscreen=false layout= useexports=true width=800 speed=2 soundsystem=pulse print=true type=auto sndport=4713 xinerama=false variant= usekbd=true fstunnel=true applications=TERMINAL,WWWBROWSER,MAILCLIENT,OFFICE multidisp=false sshproxyport=22 sound=true rootless=true iconvto=UTF-8 soundtunnel=true dpi=96 sshport=22 setdpi=0 pack=16m-jpeg directrdp=false [KDE] user= host=server name=KDE command=KDE [GNOME] user= host=server name=GNOME command=GNOME ------------------------x2gobroker-sessionprofiles.conf......................... Can you help me, please? Thanks,

3 4

can't connect to the server
by Lentes, Bernd 31 May '13

31 May '13

Hi, i'm using X2go for the first time. First i was searching for the x2goserver-xsession package, but you wrote it is included in the x2goserver-rpm. OK. Thanks. Next proplem: I can not connect. I got a message like: "Access denied. Authentication that can continue: publickey,keyboard-interactive" I found a solution here: http://www.linux-club.de/viewtopic.php?f=9&t=116048 . The above mentioned message disappeared, but i get a new one: http://filecloud.io/n7qfv9c4 . Any help would be appreciated. Thanks. Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Wer nichts verdient außer Geld verdient nichts außer Geld Helmholtz Zentrum München Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH) Ingolstädter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe Geschäftsführer: Prof. Dr. Günther Wess Dr. Nikolaus Blum Dr. Alfons Enhsen Registergericht: Amtsgericht München HRB 6466 USt-IdNr: DE 129521671

2 4

Website down?
by Paul van der Vlis 31 May '13

31 May '13

Hi, The X2go websites seems to be down. paul@server2:~$ telnet www.x2go.org 80 Trying 176.9.116.2... telnet: Unable to connect to remote host: Connection timed out paul@server2:~$ telnet x2go.org 80 Trying 85.10.207.20... telnet: Unable to connect to remote host: Connection timed out paul@server2:~$ telnet wiki.x2go.org 80 Trying 176.9.116.2... telnet: Unable to connect to remote host: Connection timed out With regards, Paul. -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl

3 3

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user