- x2go-user - X2Go ListServ

Re: [X2Go-User] Mac Client, gnome-session-fallback desktop Ubuntu 12.04
by Mervin Graves 06 Jan '14

06 Jan '14

Hi Terje, Thanks for the suggestion to give Mate a try. I installed it now on the x2go server and surprise, surprise.. the bottom-panel is no longer missing when connecting from a Mac client. I'm now playing around with the settings to make it look like Gnome as much as possible so the users don't get too scared :) Kind regards, Mervin ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Dec 2013 19:16:42 +0100 From: Terje Andersen <teranders(a)gmail.com> To: x2go-user(a)lists.berlios.de Subject: Re: [X2Go-User] X2GO Mac client Message-ID: <CA+xgCOJG1gnc7Qt0Q__9jv88OBRWR8fs3y8kA4ekbdWTnPwxUQ(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Then youshould try the mate desktop. It's a fork of gnome 2 that works well with x2go. 18. des. 2013 10:48 skrev "Anders Bruun Olsen" <abo(a)dsl.dk> f?lgende: > My users were also used to Gnome, but due to problems with Gnome in newer > Ubuntu versions, we took the plunge and switched to XFCE. > I realize that this isn't a usable answer for you, but I am afraid that I > can't really help much more. > I would try to look in logfiles and see if the panel actually crashes, or > if it is just x2go that somehow hides it. > > > 2013/12/18 Mervin Graves <mervin(a)accelcloud.com> > >> We are using gnome-session-fallback as a desktop environment. Unity >> also has issues. We have tried the following settings with Gnome, >> >> >> >> *Adjustment - **Bottom panel fails yes/no* >> >> adjust screensize: yes >> >> mark xinerama: yes >> >> set fullscreen: yes >> >> set customdesktop: yes >> >> use wholedisplay: yes >> >> >> >> Unfortunately using xfce is not an option because the employees are >> already working on Gnome for a few years now. And it would be to much of a >> change for now. >> >> >> Regards, >> >> >> >> Mervin >> >> >> >> >> >> -----Original message----- >> *From:* Anders Bruun Olsen <abo(a)dsl.dk> >> *Sent:* Tue 17-12-2013 14:36 >> *Subject:* Re: [X2Go-User] X2GO Mac client >> *To:* Mervin Graves <mervin(a)accelcloud.com>; >> *CC:* x2go-user(a)lists.berlios.de; >> >> We also run Ubuntu 12.04 on the server, with XFCE 4.10 as the desktop >> environment. I have heard that Unity can be problematic when paired with >> x2go. Not sure if this is still an issue. >> I run Ubuntu 12.04 with Unity on my main desktop, and regularly log on to >> our terminal servers with x2goclient, and don't have the mentioned problem. >> I would guess that the real problem is that the resolution chosen by >> x2goclient (by however much space is occupied on your Mac screen), isn't >> being picked up by Unity. I think that was the problem with Unity before. I >> think Gnome had the same problems. That is one of the reasons we chose XFCE >> instead. That and not wanting fancy 3D compositing to happen on a remote >> desktop :) >> >> >> 2013/12/17 Mervin Graves <mervin(a)accelcloud.com> >> >> Hi Anders, >> >> >> >> Thank you for the quick reply! Good to read that you are not experiencing >> the same issue. This indeed concerns the bottom-panel of the remote desktop >> session, not on the Mac itself. We are running a Ubuntu 12.04 desktop. So >> most likely this is setting on the clientside then? >> At first the same thing happened when connecting from Ubuntu 13.04 to the >> Ubuntu desktop, but after enabling Xinerama extension the bottom-panel >> reappeared. I've tried the same thing on the Mac's without success. >> >> >> >> Kind regards, >> >> >> >> Mervin >> >> >> >> -----Original message----- >> *From:* Anders Bruun Olsen <abo(a)dsl.dk> >> *Sent:* Tue 17-12-2013 11:36 >> *Subject:* Re: [X2Go-User] X2GO Mac client >> *To:* Mervin Graves <mervin(a)accelcloud.com>; >> *CC:* x2go-user(a)lists.berlios.de; >> Hi Mervin, >> >> I run x2goclient on a bunch of Macs (started around Snow Leopard and have >> gradually upgraded to now run on Mavericks) and I don't have any problems >> with the bottom-panel not showing. I am guessing you are talking about the >> bottom-panel of the remote desktop, and not anything on your Mac desktop. >> Which desktop environment are you running on the Linux-side? >> >> >> 2013/12/17 Mervin Graves <mervin(a)accelcloud.com> >> >> Hello, >> >> >> >> I'm currently implementing a X2GO environment to accommodate Mac Lion OSX >> users. >> >> The client seems to have some issues however, when I start-up a session >> the bottom-panel is not visible. >> >> I've experienced this on two laptops now. Is this really a bug or is it >> just a setting on the clientside? >> >> >> >> Thank you in advance! >> >> >> >> Kind regards, >> >> >> >> Mervin >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> X2Go-User mailing list >> X2Go-User(a)lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/x2go-user >> >> >> >> >> -- >> Anders Bruun Olsen >> It-ansvarlig >> Det Danske Sprog- og Litteraturselskab >> (Society for Danish Language and Literature) >> >> >> >> >> -- >> Anders Bruun Olsen >> It-ansvarlig >> Det Danske Sprog- og Litteraturselskab >> (Society for Danish Language and Literature) >> > > > > -- > Anders Bruun Olsen > It-ansvarlig > Det Danske Sprog- og Litteraturselskab > (Society for Danish Language and Literature) > > _______________________________________________ > X2Go-User mailing list > X2Go-User(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-user > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.berlios.de/pipermail/x2go-user/attachments/20131219/5afc3fa7/…> ------------------------------ _______________________________________________ X2Go-User mailing list X2Go-User(a)lists.berlios.de https://lists.berlios.de/mailman/listinfo/x2go-user End of X2Go-User Digest, Vol 40, Issue 15 *****************************************

1 0

Sound problems after update?
by Buddy Butterfly 06 Jan '14

06 Jan '14

Hi there, I do experience massive sound problems after the update. Sound is not working. Are there some changes I missed? Thanks, Matt

2 3

No sound in X2Go TCE (ATTN: @Mike)
by Stefan Baur 06 Jan '14

06 Jan '14

Hi list, I managed to get X2Go TCE running, by following the instructions on http://wiki.x2go.org/doku.php/wiki:advanced:tce:install Everything works fine, except for the sound. All my thin clients don't emit sound. Browsing through the list archive, I found a post from back in October where Mike said it happens due to a permission problem, and he posted two links to GIT where he had patched this (the first patch introduced a typo, which was fixed in the second patch). So I decided to give it a go and simply copy the x2gothinclient_create script from GIT over the one I already had on disk. Sadly, this just made things worse: after removing the chroot directory and rebuilding it with the new version of x2gothinclient_create, neither keyboard nor mouse work, so I can't even log in. Reverting back to the old script, rm'ing the chroot directory and running x2gothinclient_create again fixed that issue - but I still have no sound. Any hints? Which log or config file(s) should I post? -Stefan

2 3

Tastenproblem: alt gr wird nicht übertragen
by Gregor Burck 03 Jan '14

03 Jan '14

Moin, ich habe das Problem, das bei der Verbindung auf einen x2goserver die alt gr Taste nicht mit übertragen wird. Ist das ein Käferchen oder eine Funktion? Kann ich die alt gr Taste sonst irgendwie simulieren? Grüße Gregor --

1 0

[newb] display size ignored
by Neal Becker 29 Dec '13

29 Dec '13

Just trying x2go on fedora 20. Starting a kde session, the display size is ignored. It takes the entire display. xdpyinfo reports: screen #0: dimensions: 1920x1200 pixels (423x264 millimeters) resolution: 115x115 dots per inch The physical screen is (local X): screen #0: dimensions: 1680x1050 pixels (371x232 millimeters) resolution: 115x115 dots per inch

4 13

[newb] fedora 20 gnome won't start
by Neal Becker 28 Dec '13

28 Dec '13

kde works, but gnome (or unity) just gives me a message about 'something's wrong'

2 1

New user x2go
by Michel Dubois 24 Dec '13

24 Dec '13

Hi, I went to install x2go server on my squeeze debian server. I uninstalled No machine before. I found the system very long to be connected, in point of comparison.. Note, I resolved this error message : Access denied. Authentication that can continue: publickey,password,keyboard-interactive So I modified my sshd_config file Anybody could give me any advise for solving this problem. What I've to check? Thanks for your support.

1 0

Re: [X2Go-User] X2GO Mac client
by Mervin Graves 19 Dec '13

19 Dec '13

We are using gnome-session-fallback as a desktop environment. Unity also has issues. We have tried the following settings with Gnome, Adjustment - Bottom panel fails yes/no adjust screensize: yes mark xinerama: yes set fullscreen: yes set customdesktop: yes use wholedisplay: yes Unfortunately using xfce is not an option because the employees are already working on Gnome for a few years now. And it would be to much of a change for now. Regards, Mervin -----Original message----- From:Anders Bruun Olsen <abo(a)dsl.dk> Sent:Tue 17-12-2013 14:36 Subject:Re: [X2Go-User] X2GO Mac client To:Mervin Graves <mervin(a)accelcloud.com>; CC:x2go-user@lists.berlios.de; We also run Ubuntu 12.04 on the server, with XFCE 4.10 as the desktop environment. I have heard that Unity can be problematic when paired with x2go. Not sure if this is still an issue. I run Ubuntu 12.04 with Unity on my main desktop, and regularly log on to our terminal servers with x2goclient, and don't have the mentioned problem. I would guess that the real problem is that the resolution chosen by x2goclient (by however much space is occupied on your Mac screen), isn't being picked up by Unity. I think that was the problem with Unity before. I think Gnome had the same problems. That is one of the reasons we chose XFCE instead. That and not wanting fancy 3D compositing to happen on a remote desktop :) 2013/12/17 Mervin Graves <mervin(a)accelcloud.com> Hi Anders, Thank you for the quick reply! Good to read that you are not experiencing the same issue. This indeed concerns the bottom-panel of the remote desktop session, not on the Mac itself. We are running a Ubuntu 12.04 desktop. So most likely this is setting on the clientside then? At first the same thing happened when connecting from Ubuntu 13.04 to the Ubuntu desktop, but after enabling Xinerama extension the bottom-panel reappeared. I've tried the same thing on the Mac's without success. Kind regards, Mervin -----Original message----- From:Anders Bruun Olsen <abo(a)dsl.dk> Sent:Tue 17-12-2013 11:36 Subject:Re: [X2Go-User] X2GO Mac client To:Mervin Graves <mervin(a)accelcloud.com>; CC:x2go-user@lists.berlios.de; Hi Mervin, I run x2goclient on a bunch of Macs (started around Snow Leopard and have gradually upgraded to now run on Mavericks) and I don't have any problems with the bottom-panel not showing. I am guessing you are talking about the bottom-panel of the remote desktop, and not anything on your Mac desktop. Which desktop environment are you running on the Linux-side? 2013/12/17 Mervin Graves <mervin(a)accelcloud.com> Hello, I'm currently implementing a X2GO environment to accommodate Mac Lion OSX users. The client seems to have some issues however, when I start-up a session the bottom-panel is not visible. I've experienced this on two laptops now. Is this really a bug or is it just a setting on the clientside? Thank you in advance! Kind regards, Mervin _______________________________________________ X2Go-User mailing list X2Go-User(a)lists.berlios.de https://lists.berlios.de/mailman/listinfo/x2go-user -- Anders Bruun Olsen It-ansvarlig Det Danske Sprog- og Litteraturselskab (Society for Danish Language and Literature) -- Anders Bruun Olsen It-ansvarlig Det Danske Sprog- og Litteraturselskab (Society for Danish Language and Literature)

3 2

Re: [X2Go-User] X2GO Mac client
by Mervin Graves 17 Dec '13

17 Dec '13

Hi Anders, Thank you for the quick reply! Good to read that you are not experiencing the same issue. This indeed concerns the bottom-panel of the remote desktop session, not on the Mac itself. We are running a Ubuntu 12.04 desktop. So most likely this is setting on the clientside then? At first the same thing happened when connecting from Ubuntu 13.04 to the Ubuntu desktop, but after enabling Xinerama extension the bottom-panel reappeared. I've tried the same thing on the Mac's without success. Kind regards, Mervin -----Original message----- From:Anders Bruun Olsen <abo(a)dsl.dk> Sent:Tue 17-12-2013 11:36 Subject:Re: [X2Go-User] X2GO Mac client To:Mervin Graves <mervin(a)accelcloud.com>; CC:x2go-user@lists.berlios.de; Hi Mervin, I run x2goclient on a bunch of Macs (started around Snow Leopard and have gradually upgraded to now run on Mavericks) and I don't have any problems with the bottom-panel not showing. I am guessing you are talking about the bottom-panel of the remote desktop, and not anything on your Mac desktop. Which desktop environment are you running on the Linux-side? 2013/12/17 Mervin Graves <mervin(a)accelcloud.com> Hello, I'm currently implementing a X2GO environment to accommodate Mac Lion OSX users. The client seems to have some issues however, when I start-up a session the bottom-panel is not visible. I've experienced this on two laptops now. Is this really a bug or is it just a setting on the clientside? Thank you in advance! Kind regards, Mervin _______________________________________________ X2Go-User mailing list X2Go-User(a)lists.berlios.de https://lists.berlios.de/mailman/listinfo/x2go-user -- Anders Bruun Olsen It-ansvarlig Det Danske Sprog- og Litteraturselskab (Society for Danish Language and Literature)

2 1

X2GO Mac client
by Mervin Graves 17 Dec '13

17 Dec '13

Hello, I'm currently implementing a X2GO environment to accommodate Mac Lion OSX users. The client seems to have some issues however, when I start-up a session the bottom-panel is not visible. I've experienced this on two laptops now. Is this really a bug or is it just a setting on the clientside? Thank you in advance! Kind regards, Mervin

3 2

remotely open an existing software session
by Robert Lefebvre 12 Dec '13

12 Dec '13

We are running a forex trading program inside of wine on an Edubuntu 12.04 LTSP server. We have 5 test users setup on the server each running their own trading session, each with their own install of the program in wine. The trading program is left running for each user. I can login to any user on the server with x2go but the trading program is not available when I do, even though it is running for that same user on the server. If I try to start the software from the x2go session it briefly flickers ;it it tries to open but quickly dies. Is there any way to "tap" into that same session running on the server once I am logged in? I guess what I am really asking is whether X2go can run just to enable "viewing of that software session? Thanks Robert -- BungeeBones.com - Mine Bitcoin With Your Web Traffic - A B2B Link Exchange - Free Links in limited locations - human edited and reviewed - Networked online advertising business opportunities available through our free, distributed web directory script

2 1

Broker + SSH Proxy + Windows Terminal Server: "An exceptional problem occurred"
by Mathias Ewald 12 Dec '13

12 Dec '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, working on RDP to Windows Server 2008 through SSH proxy I am seeing this in X2goclient: "Authentication failed" together with Query to remote X2Go Broker Agent (user: x2gobroker, hostname: 192.168.3.101, port: 22) failed in debug output. On the broker I can see this: ==> /var/log/x2gobroker/broker.log <== 2013-12-09 15:12:40,304 - broker - INFO - client address is 192.168.2.100 2013-12-09 15:12:40,322 - broker - DEBUG - username: student0, password: XXXXX, task: listsessions, profile_id: 2013-12-09 15:12:40,323 - broker - DEBUG - base_broker.X2GoBroker.get_authentication_mechanism(): found default-auth-mech in global config section: pam 2013-12-09 15:12:40,323 - broker - DEBUG - base_broker.X2GoBroker._do_authenticate(): authenticating user=student0 with password=<hidden> against backend=inifile. 2013-12-09 15:12:40,324 - broker - DEBUG - connecting to authentication service socket /run/x2gobroker/x2gobroker-authservice.socket 2013-12-09 15:12:40,324 - broker - DEBUG - sending username=student0, password=<hidden>, service=x2gobroker to authentication service 2013-12-09 15:12:40,342 - broker - INFO - authentication against PAM service »x2gobroker« succeeded for user »student0« 2013-12-09 15:12:40,343 - broker - DEBUG - base_broker.X2GoBroker.check_access(): result of authentication check is: True 2013-12-09 15:12:40,349 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-09 15:12:40,356 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: ssh 2013-12-09 15:12:40,484 - broker - DEBUG - Executing agent command on remote host (192.168.3.100): sh -c "/usr/lib/x2go/x2gobroker-agent foo ping" 2013-12-09 15:12:40,677 - broker - WARNING - base_broker.X2GoBroker.get_remote_agent(): failed to allocate any broker agent (query-mode: SSH, remote_agent: {u'hostname': '192.168.3.100', u'port': 22}) 2013-12-09 15:12:40,826 - broker - DEBUG - Executing agent command on remote host (192.168.3.100): sh -c "/usr/lib/x2go/x2gobroker-agent student0 listsessions" 2013-12-09 15:12:41,202 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-09 15:12:41,208 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: ssh ==> /var/log/x2gobroker/error.log <== 2013-12-09 15:12:41,213 - error - ERROR - An exceptional problem occurred: X2GoBrokerAgentException("Query to remote X2Go Broker Agent (user: x2gobroker, hostname: 192.168.3.101, port: 22) failed") So x2gobroker tries to connect to x2gobroker-agent on the remote host. But as it's a Windows Machine, there is no SSH server listening. Why is it doing this? Here is my session config: [DEFAULT] command=TERMINAL defsndport=true useiconv=false iconvfrom=UTF-8 height=600 export= quality=9 fullscreen=false layout= useexports=true width=800 speed=2 soundsystem=pulse print=true type=auto sndport=4713 xinerama=true variant= usekbd=true fstunnel=true applications=TERMINAL,WWWBROWSER,MAILCLIENT,OFFICE multidisp=false sshproxyport=22 sound=true rootless=true iconvto=UTF-8 soundtunnel=true dpi=96 sshport=22 setdpi=0 pack=16m-jpeg directrdp=false [test-rdp] rdpclient=rdesktop directrdpsettings= host=192.168.3.101 user=Administrator rdpport=3389 directrdp=true command=RDP rdpoptions= rdpserver=10.0.0.123 usesshproxy=true sshproxytype=SSH sshproxyuser=root sshproxykeyfile= sshproxyhost=broker sshproxyport=22 sshproxysamepass=false sshproxysameuser=false sshproxyautologin=false acl-clients-allow=ALL acl-groups-allow=xfceusers regards Mathias - -- Mathias Ewald - vXpertise WWW: www.vxpertise.net Landline: +49 911 495208940 Mobile: +49 151 17317864 Mail: mathias.ewald(a)vxpertise.net Skype: mathias.ewald ATTENTION: My email address mathias(a)mathias-ewald.de is no longer in use. Please send to mathias.ewald(a)vxpertise.net only! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSpcXBAAoJEA7RPiZyzgdIT4QP/isEm//X1cIt5f9qeEvZ0+hU fQSBc0lApKLxnG65bDN8SquYlTQvYUxumDUb716tw+AjU2979JFDlKNJLcaWicVT CEJNf38if4oq2yHCM5ASIYB4eTtiKpGjGq7NelZ6UX+vR1f0ItHOo0nV8EBEj+gL iKY/jCnInDgn7RpVKWu/Gmu6kHkzc5goYhbLstrxTxrw0B3OCWyrYdxmrQgA9vcQ cEYnqmINHDsv3HlSjZphMxoB5jZd4lJED5juBHfooXEazohGQ9izzv5FGk4c9hay TooNyqIFE14BMbGpPR2NsRdCemVbeQo5iYm4P5V3VswAEeqnSoqFroPhrmGxiY1n gB8D97r/4UughIyHvJLpi/ldjsRgbAQ0plIhKGy08a6vxTagLGI23FaNyGh73AD8 7cs1SddbeJ8Gf0rDoymaX3OgaphlTr6iFe1Ra2lmyx1nb8Nk3cDkW9sm3Bom8gzX bKgc2xXkgx37Ln7ixrajK7cA/svPvxD6lPLJWFoSJEQdj4YjGlCxJK4tx9TUGc/M z4cy3To0L1zsRORJxkPhIMv5s+poPEXg5BOVfDFVFqbhUwxGgBqvWYu+s/N0dTPZ q/weQH83uN+LhhtaGlrLOplEHO6zzvMlHzGhSwUEwXkPkREc6UVngrNjmQ/JblPA 70gVyum3sy0Z/ZpL70q8 =TezR -----END PGP SIGNATURE-----

2 1

Can't cut/paste from XEmacs to Windows
by Nick Ingegneri 11 Dec '13

11 Dec '13

Hi all, Does anybody have a suggestion for this situation: User reported that he was able to cut/paste from Windows to XEmacs, but unable to cut/paste in the opposite direction from XEmacs to Windows. I verified the problem with the following notes: - The XEmacs copy is a simple X highlight of the text in question. - The copied text from XEmacs is making it to the X clipboard and can be pasted to other X windows - The copied text from XEmacs is not making it to the Windows clipboard. The problem appears specific to copying from XEmacs. Text copied from other X windows behaves as expected. Thanks, Nick

2 2

X2Go python packages for EPEL 6
by Orion Poplawski 10 Dec '13

10 Dec '13

I've just submitted the X2Go python packages for EPEL 6 testing: https://admin.fedoraproject.org/updates/python-x2go-0.4.0.7-1.el6,pyhoca-cl… -- Orion Poplawski Technical Manager 303-415-9701 x222 NWRA, Boulder/CoRA Office FAX: 303-415-9702 3380 Mitchell Lane orion(a)nwra.com Boulder, CO 80301 http://www.nwra.com

1 0

What is latest stable version of the Windows client?
by Nick Ingegneri 10 Dec '13

10 Dec '13

Hi all, Just looking for confirmation of what the latest stable version of the Windows client is? This announcement says that 4.0.1.1 was released: http://permalink.gmane.org/gmane.linux.terminal-server.x2go.announce/76 However, 4.0.0.3 is the newest version in the release directory: http://code.x2go.org/releases/binary-win32/x2goclient/releases/ In addition, the version downloaded by clicking on the "latest" link is also 4.0.0.3: http://code.x2go.org/releases/X2GoClient_latest_mswin32-setup.exe Thanks, Nick

5 5

Fullscreen session stops working in unity
by Markus Fritsche 09 Dec '13

09 Dec '13

Hello, I googled it, but didn't came up with a solution (probably due to wrong searchterms). I am connecting to a x2go server just fine in fullscreen mode. When I minimize the session (using the top right hot corner) and go back, I can't open the window after the second time I did that (minimize & reopen the window). The session still seems to be working & valid, just I can't see the window. I am using x2go-stable from ubuntu ppa on Ubuntu-13.10 with standard unity (no tweaks). Did someone have a similar problem and solved it? Best regards, Markus

4 6

Session Resume through X2gobroker with SSH Proxy
by Mathias Ewald 08 Dec '13

08 Dec '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I set up x2gobroker with SSH proxy with passwordless authentication (auth on broker and proxy, not auth at x2goserver). Now I want to get the session resuming fixed. Everytime I connect, I get one additional session while disconnecting results in a suspended session. After a couple of days, my x2goserver runs out of memory and therefore becomes very slow. #### # x2gobroker.conf #### root@access:/etc/x2go# cat x2gobroker.conf | grep -v -E "^\s*#" | grep - -v -E "^\s*$" [global] ignore-primary-group-memberships = false [zeroconf] [inifile] enable = true root@access:/etc/x2go# #### # x2gobroker-sessionprofiles.conf #### [DEFAULT] setsessiontitle=true krblogin=false pack=16m-jpeg quality=9 speed=2 usesshproxy=true sshproxytype=SSH sshproxyhost=access.vxlt.net sshproxyport=22 sshproxyautologin=false sshproxysamepass=false sshproxysameuser=false width=800 height=600 dpi=96 fullscreen=false maxdim=false multidisp=true xinerama=false usekbd=true sound=false soundtunnel=false defsndport=false soundsystem=pulse startsoundsystem=false useexports=false useiconv=false iconvform=UTF-8 iconvto=UTF-8 fstunnel=false print=false usemimebox=false mimeboxaction=OPEN autostart=true xdmcpserver=localhost command=XFCE4 published=false command=XFCE acl-groups-deny=ALL acl-clients-allow=ALL acl-any-order=deny-allow sshproxysameuser=false sshproxyuser=x2gosshproxy user= [termsrv] host=10.173.20.2 name=Terminal Server published=false acl-groups-allow=vxltadmins broker-session-autologin=true #### # X2Go Server (termsrv) #### mathias@termsrv:~$ sudo dpkg -l | grep x2go [sudo] password for mathias: ii cups-x2go 3.0.1.0-0x2go1~git20131208.74+squeeze.heuler.1 all Virtual X2Go printer for CUPS ii libnx-x11 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 nx-X11 ii libx2go-log-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Log package ii libx2go-server-db-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Server:DB package ii libx2go-server-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Server package ii libxcomp3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX X compression library ii libxcompext3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX X11 protocol compression extensions library ii libxcompshad3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX shadowing library ii nxagent 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX agent ii nxproxy 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX proxy ii pinentry-x2go 0.7.5.7-0x2go1~git20131129.49+squeeze.heuler.1 amd64 Qt4-based PIN or pass-phrase entry dialog for x2goclient ii python-x2go 0.4.0.8-0~1078~raring1 all Python module providing X2Go client API ii x2goagent 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 all X2Go agent ii x2gobroker-agent 0.0.3.0-0x2go1~git20131205.583+squeeze.heuler.1 amd64 X2Go http(s) based session broker (common files) ii x2gocdmanager 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 amd64 clientside daemon enabling automatic CD-Rom mounting ii x2goclient 4.0.1.2-0x2go2~git20131208.470+squeeze.heuler.1 amd64 X2Go Client application (Qt4) ii x2godesktopsharing 3.1.1.1-0x2go1~git20131129.109+squeeze.heuler.1 amd64 share X2go desktops with other users (via shadow sessions) ii x2goplugin 4.0.1.2-0x2go2~git20131208.470+squeeze.heuler.1 amd64 X2Go Client (Qt4) as browser plugin ii x2goserver 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 X2Go server daemon scripts ii x2goserver-common 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 X2Go Server (common files) ii x2goserver-extensions 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (extensions) ii x2goserver-fmbindings 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all Generic (freedesktop-based) file manager bindings for X2Go ii x2goserver-printing 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (printing) ii x2goserver-xsession 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (Xsession runner) ii x2gosmartcardrules 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 all UDEV rules for smartcard readers ii x2gousbmount 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 all clientside usb mass-storage device mounting mathias@termsrv:~$ As you can see, x2gobroker-agent is installed. #### # Logs on X2gobroker #### root@access:/var/log/x2gobroker# tail -n 0 -f authservice.log broker.log ==> authservice.log <== ==> broker.log <== 2013-12-08 13:50:57,167 - broker - INFO - X2Go Session Broker (0.0.3.0), 2013-12-08 13:50:57,168 - broker - INFO - written by Mike Gabriel (X2Go Project) <mike.gabriel(a)das-netzwerkteam.de> 2013-12-08 13:50:57,168 - broker - INFO - Setting up the broker's environment... 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_DEBUG: True 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_CONFIG: /etc/x2go/x2gobroker.conf 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_AGENT_CMD: /usr/lib/x2go/x2gobroker-agent 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_AUTHSERVICE_SOCKET: /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_DEFAULT_BACKEND: inifile 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_SSL_CERTFILE: 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_SSL_KEYFILE: 2013-12-08 13:50:57,180 - broker - INFO - client address is 127.0.0.1 2013-12-08 13:50:57,181 - broker - DEBUG - username: mathias, password: XXXXX, task: listsessions, profile_id: , cookie: 2013-12-08 13:50:57,181 - broker - DEBUG - base_broker.X2GoBroker.get_authentication_mechanism(): found default-auth-mech in global config section: pam 2013-12-08 13:50:57,182 - broker - DEBUG - base_broker.X2GoBroker._do_authenticate(): authenticating user=mathias with password=<hidden> against backend=inifile. 2013-12-08 13:50:57,182 - broker - DEBUG - connecting to authentication service socket /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:50:57,183 - broker - DEBUG - sending username=mathias, password=<hidden>, service=x2gobroker to authentication service 2013-12-08 13:50:57,198 - broker - INFO - authentication against PAM service »x2gobroker« succeeded for user »mathias« 2013-12-08 13:50:57,198 - broker - DEBUG - base_broker.X2GoBroker.check_access(): result of authentication check is: True 2013-12-08 13:50:57,205 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found broker-session-autologin in session profile with ID termsrv: true. This one has precendence over the default value. 2013-12-08 13:50:57,282 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,288 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,359 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,366 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,435 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,442 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,513 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,520 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,591 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,597 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,664 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,671 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,739 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,746 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,813 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,820 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,887 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,895 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,962 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,969 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:51:15,935 - broker - INFO - X2Go Session Broker (0.0.3.0), 2013-12-08 13:51:15,936 - broker - INFO - written by Mike Gabriel (X2Go Project) <mike.gabriel(a)das-netzwerkteam.de> 2013-12-08 13:51:15,937 - broker - INFO - Setting up the broker's environment... 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_DEBUG: True 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_CONFIG: /etc/x2go/x2gobroker.conf 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_AGENT_CMD: /usr/lib/x2go/x2gobroker-agent 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_AUTHSERVICE_SOCKET: /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_DEFAULT_BACKEND: inifile 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_SSL_CERTFILE: 2013-12-08 13:51:15,939 - broker - INFO - X2GOBROKER_SSL_KEYFILE: 2013-12-08 13:51:15,948 - broker - INFO - client address is 127.0.0.1 2013-12-08 13:51:15,949 - broker - DEBUG - username: mathias, password: XXXXX, task: selectsession, profile_id: termsrv, cookie: 2013-12-08 13:51:15,949 - broker - DEBUG - base_broker.X2GoBroker.get_authentication_mechanism(): found default-auth-mech in global config section: pam 2013-12-08 13:51:15,949 - broker - DEBUG - base_broker.X2GoBroker._do_authenticate(): authenticating user=mathias with password=<hidden> against backend=inifile. 2013-12-08 13:51:15,950 - broker - DEBUG - connecting to authentication service socket /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:51:15,950 - broker - DEBUG - sending username=mathias, password=<hidden>, service=x2gobroker to authentication service 2013-12-08 13:51:15,965 - broker - INFO - authentication against PAM service »x2gobroker« succeeded for user »mathias« 2013-12-08 13:51:15,965 - broker - DEBUG - base_broker.X2GoBroker.check_access(): result of authentication check is: True 2013-12-08 13:51:15,973 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none Need anything else? regards Mathias - -- Mathias Ewald - vXpertise WWW: www.vxpertise.net Landline: +49 911 495208940 Mobile: +49 151 17317864 Mail: mathias.ewald(a)vxpertise.net Skype: mathias.ewald ATTENTION: My email address mathias(a)mathias-ewald.de is no longer in use. Please send to mathias.ewald(a)vxpertise.net only! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSpLTnAAoJEA7RPiZyzgdIJrkP+QFMowIbI7zG1JOdnAxcas3m TqtNPdtmDR+v7qXxNWwKc1fOGepr585MZUf/iTmdLkxNZUyaK+4N/JS4UiqWft+r 4ZGswc5vHEpbERSoWCFqLNq8kVCblh1dxBarFCw87ZMf3zaw8moGEj7LJN9+FO9L VM9kqwLzY/Do0LDzlU3xYoGvXoFcgcb1gIcg4EPPiPFbozre9BNV0Hz7LgwIws4J kgWm/eEciyOMWfYbkpPxTtNdLig0Ks9DMLTxVUWiG1mJtgRtV8MRA/jd92m4ZQ0V zzwA09FxTYdY3L8wnlPtw/nUzn8vKLSahaMvNKxJO+8r3oy35PS81ZjiWxbvBVUt M0jlliq/S7Ir75L2keaBye+ZDQh2DzUztzM9mSl7DdRMio6wXPtW3F84uUdIzfqr y5FxJigklT5kaavZYCJtgYfeNKpnUc8ljsmkJI9FG+JOEOOmv4JGOwquAWDpJN0s 9TKB65ZNSnkk5zpANLTCCkIAAdwsB9r9VDm0nElttHwHZZM1m+0WYWKHjyDu5T8Q 65YA0NPon3u5SFjTFoyJ9o8RxfjMR1RCid/wIeRdtpOfLIodx/lRiyh+nGkQWRa5 idEBGy8b/DPSGXZLFNy7EZNKfum3Vvl2QzW/I+Ocaf81ZaW4hneYbgFk1fzL0OLM YPOgQC03zGvP7tismRc/ =rQsU -----END PGP SIGNATURE-----

1 0

Can't open display remotely or locally when using hostname in $DISPLAY
by Nick Ingegneri 06 Dec '13

06 Dec '13

Can anybody assist me with debugging what I am doing wrong in this case? I am running the X2Go client in Window 7 and the X2Go server on a RedHat 6 machine. I would like to have a remote linux host export the display back to the X2Go server, which would then forward it to the Windows 7 client. Starting a new X2Go session, this works on the local host: [user@localmachine ~]$ echo $DISPLAY :84 [user@localmachine ~]$ xhost + access control disabled, clients can connect from any host [user@localmachine ~]$ xclock # note - the xclock starts without problems But on a remote host, I found I could not connect to that display, even with "xhost +" already set: [user@remotemachine ~]$ setenv DISPLAY localmachine:84 [user@remotemachine ~]$ xclock Error: Can't open display: localmachine:84 [user@remotemachine ~]$ As an experiment, I tried setting the DISPLAY on localmachine to use the hostname, after which it could not connect to the display: user@localmachine ~]$ setenv DISPLAY localmachine:84 [user@localmachine ~]$ xclock Error: Can't open display: localmachine:84 [user@localmachine ~]$ xhost xhost: unable to open display "localmachine:84" I'm probably missing something obvious, but don't have any idea what is misconfigured. Thanks!

3 6

x2gocleansessions fix
by Gerald Richter - ECOS 06 Dec '13

06 Dec '13

Hi, x2gocleansessions sometimes fails for me, because there is a lot of extra output in the log like “Proxy: WARNING! Detected drift in system timer. Resetting to current time.”. The following patch fixes the problem: --- /usr/sbin/x2gocleansessions.orig 2013-12-06 06:37:46.000000000 +0100 +++ /usr/sbin/x2gocleansessions 2013-12-06 06:38:45.000000000 +0100 @@ -56,7 +56,7 @@ my $sess=shift; my $user=shift; my $log="/tmp/.x2go-${user}/session-C-${sess}.log"; - my $text=`tail -1 $log 2>/dev/null`; + my $text=`grep Session: $log 2>/dev/null|tail -1`; if ($text =~ m/Session suspended/) { return 0; Regards Gerald

1 0

Sudden problems with x2gobroker
by Short, Kermit 05 Dec '13

05 Dec '13

Greetings, I recently ran upates on our broker server, and after doing so, I can't get any client to display the session list. I get a "could not login" loop of death, and the following in the apache2 error log: [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2715): Target WSGI script '/usr/bin/ x2gobroker' cannot be loaded as Python module. [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2715): Exception occurred processing WSGI script '/usr/bin/x2gobroker'. [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] Traceback (most recent call last): [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/bin/x2gobroker", line 221, in <module > [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] prep_http_mode() [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/bin/x2gobroker", line 39, in prep_htt p_mode [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] import x2gobroker.web.extras [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/lib/python2.7/dist-packages/x2gobroke r/web/extras.py", line 34, in <module> [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] class X2GoBrokerItWorks(_RequestHandler): [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] NameError: name '_RequestHandler' is not defined [Wed Dec 04 16:15:24 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2716): Target WSGI script '/usr/bin/ x2gobroker' cannot be loaded as Python module. [Wed Dec 04 16:15:24 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2716): Exception occurred processing WSGI script '/usr/bin/x2gobroker'. I believe I'm using the nightly build due to necessity, and I've got a presentation tomorrow on how well X2Go works. Anyone know what I can do to get this working again? -- Kermit Short DCS-5

2 2

x2goserver and recent GNOME Desktops
by Nikos Skalkotos 05 Dec '13

05 Dec '13

Hi all, Has anybody succeeded on connecting on a system that has a recent version of gnome (3.8 or 3.10)? I tried it in Ubuntu 13.10 and in Fedora 19 and Fedora 20 prerealese. For Ubuntu 13.10 I've used the x2go* packages found in launchpad and for Fedora 19 and 20 the official packages. In Ubuntu there is a gnome-fallback.session file that is link to gnome-flashback.session and there is a gnome-fallback-compiz.session that is link to gnome-flashback-compiz.session The first one uses metacity and should work with x2go and the latter uses compiz, so it probably needs 3d support. If I try to do: gnome-session --session gnome-fallback or gnome-session --session gnome-flashback I get a black screen and in the ~/.xsession-x2go-errors I see lines like this: Script for cjkv started at run_im. Script for default started at run_im. Script for cjkv started at run_im. Script for default started at run_im. gnome-session-is-accelerated: No composite extension. gnome-session-check-accelerated: Helper exited with code 256 gnome-session-is-accelerated: No composite extension. gnome-session-check-accelerated: Helper exited with code 256 There are complains that the fallback desktop in 13.10 requires 3d acceleration: http://askubuntu.com/questions/361617/does-gnome-fallback-desktop-require-a… The required componets for "GNOME Flashback (No effects)" are these: RequiredComponents=gnome-panel;gnome-settings-daemon;gnome-screensaver;metacity; If I create a script in /usr/local/bin: user@ubuntu-desktop:/usr/local/bin$ cat startmyubuntu #!/bin/bash gnome-panel& gnome-settings-daemon& gnome-screensaver& metacity And try to run it in the x2go command I manage to pop-up a crippled desktop but I don't think this is the way to go. In Fedora things are even worse. The available gnome sessions are gnome and gnome-classic and both seem to depend on mutter. This command ends up in black screen: gnome-session --session gnome-classic The required components for gnome classic are: RequiredComponents=gnome-shell-classic;gnome-settings-daemon;nautilus-classic; I have manually installed metacity and tried to execute a script that loaded the required components [root@localhost bin]# cat startmyubuntu #!/bin/bash /usr/bin/gnome-shell --mode=classic & /usr/libexec/gnome-settings-daemon-localeexec & nautilus --no-default-window --force-desktop & metacity & wait But the desktop is even more crippled. Is GNOME still supported by x2go or should we consider it abandoned like we did with Unity when Unity2d was dropped? Nikos

1 0

x2go session is the wrong dimensions
by Roderick Johnstone 02 Dec '13

02 Dec '13

Hi Sometimes when starting an x2go session (KDE as it happens) I find that the session is created with dimensions 1920x1200 whereas my client window is eg 800x600. I therefore only get to interact with a small part of the remote desktop. Come someone say please: 1) Why does this happen? 2) How can I prevent it happening? 2) How can I resize the session to match the client window size. Thanks Roderick Johnstone

2 1

distributing user settings
by Carl 02 Dec '13

02 Dec '13

Hello, I have recently setup a multi user x2go server, and I think it works great. I've got one issue though, that I would like to ask for help with or ideas about: When creating a session in the client, there's a lot of settings to fill out, so to tell a user how to set their client up I need to send a fairly long email, and it doesn't seem as easy to the user as it is once they are set up. With NX, I could copy a session settings file onto a CD along with the client software, tell the user to install the software and double click on the session file to login. They were then prompted only for username and password in a simple dialogue, and this was no bother at all to the user. (this was before NX4 was released with a very complicated user interface) I'd like to do something similar - find a way to make sure the user doesn't have to set colours and image format, click fullscreen, click to enable audio, set the link speed etc. And I want it to work both for Windows and Linux users. I've seen there's some other client software for x2go that I haven't tried, and maybe that's the solution - I will try shortly. Any ideas would be much appreciated. Thanks :-) Best Regards, Carl

3 2

Setting keyboard mapping in KDE sessions
by Roderick Johnstone 01 Dec '13

01 Dec '13

Hi As far as I can see, the x2go client keyboard settings are not respected when starting a KDE session on the server because KDE overrides these with its own settings. For our NX server server I was able to override the KDE settings by setting UserScriptAfterSessionStart in node.cfg to reference a script that parsed the NX session keyboard file and constructed the appropriate setxkbmap command. Is there an equivalent to the UserScriptAfterSessionStart functionality for the x2go server? Thanks Roderick Johnstone

1 0

Preseeding Ubuntu remote-login-service.conf
by Kjetil Fleten 27 Nov '13

27 Nov '13

We are successfully using Mike's excellent guide to Unity Greeter with X2Go Remote Login Support. http://sunweavers.net/blog/unity-greeter-with-x2go-remote-login-support One of the things we want to do next, is to tweak the remote-login-service.conf so that username and password are passed to the UCCS-like WebUI of the X2Go Session Broker automaticly. I have tried add a line to the config file, but the syntax is obviously wrong: [Remote Login Service] Servers=MyUCCSTest [Server MyUCCSTest] Name=Remote Login URI=http://x2gobroker.localdomain:8080/uccs/inifile/ echo <mypassword> | thin-client-config-agent <myuserid> I have also tried a lot of other variations over the above, with no success. This test works: $ SERVER_ROOT=http://x2gobroker.localdomain:8080/uccs/inifile/ $ export SERVER_ROOT $ echo <mypassword> | thin-client-config-agent <myuserid> Can <mypassword> and <myuserid> be implemented in a similar way to the conf file ? Anyone that have a good tip ? -- Med vennlig hilsen / best regards Kjetil Fleten Fleten.net AS, Tyinvegen 5151, 2975 Vang i Valdres, Noreg Tlf +47 95861348, ORG nr. 999 542 018 (NO) Søndergade 27, 8740 Brædstrup, Danmark Tlf. +45 41153148 CVR. nr. 35479228 (DK) thats-IT(a)fleten.net, www.fleten.net <http://www.fleten.net>

2 3

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user