- x2go-user - X2Go ListServ

Important - Action Required to Continue Your Subscription to x2go-user
by Heinz-M. Graesing 15 Apr '14

15 Apr '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear subscriber to x2go-user, As you may already know, BerliOS, where x2go-user is currently hosted, is closing down on April 30, 2014. We have prepared a new x2go-user mailing list on lists.x2go.org - but due to technical and legal constraints, we are unable to carry your subscription over to the new host automatically. So, if you wish to receive x2go-user messages after April 30, 2014, please go to http://lists.x2go.org/listinfo/x2go-user and manually subscribe to the new x2go-user list available there. Kind Regards, The X2Go Listserv Admins -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Icedove - http://www.enigmail.net/ iQIcBAEBAgAGBQJTTY2PAAoJEKRUbBMT/NRx7JgQALVPr4qvh6z+fW/1nUzJuq2P ne1UXGiWrBa2HV4ouEeLMWH623o+h5X0s3WjFSIYXP5qS7vIkS6bTimelbyn8780 4Kk5jDgb8AvvLljwl3+vR0cZfDIsWw+9u11hwzF67FpWj02E4QsznXwUDW4ylkRL pPUD/YfMAKhFKvm+5DvPYqFpS67V1XE7yv+qBLDKqhlZcj7kVJFG9tU3/lgUFkfm /LkMN38uXenpatgcTqSaU+hfXrBAlkBT8fyKHDYlECUy6nDfn10tXdOHGroGroOS QBlTORKi7rxBdKMiNMKNZTv3+ahnng+6TYqEFlEfXh7cLsyBH1mUPcfpmzGd5vKy iFywhZ01aj1qolztkuBvKWSzV7uLvUO81njn+Nup5HC/SNP4nd27diwSfKa4aG84 LdTU0/jh95fatphx7R4kD4EG1AFHo1OLYo2GNjwBCp61oaxRKbfBQT+rgp53zYy0 +/4tHA1ZNWECrzjBo249twFW0nGbLcdBI/+HspUAktfRWEpj7tCi5N2i++rG9b4b yWVjebdVMaChzwg0lVAhvA7RN8gyA3v5vMAD5q/4kzYoHbTzXDsbrmAzXd1v4K5f Yx80J/LFfbIsy30w40ZrhTFoNV3wyhguVtiW6KXRKMMdgyttA+jC949qxweUpAYW gR9siGU4uhL5QjZZbe1M =qjh+ -----END PGP SIGNATURE-----

1 0

Failed to restore all the required visuals...
by Nigra Truo 15 Apr '14

15 Apr '14

Can't resume the NX session on this display. I'm trying to resume a session on a Linux Debian Wheezy system that I opened on Windows 7. And since the last upgrade, it does not work anymore with this error message. Does anybody know how to get around this? Thanks, Markus

2 4

Where are the X2Go Client User Settings stored on my Windows PC
by Daniela Meyer 15 Apr '14

15 Apr '14

Hi, where are the X2Go Client User Settings stored on my Windows 8.1 Pro PC? After deinstalling and reinstalling my old server settings are already shown on my new X2Go Client. So how can I delete it completely with all the old settings?

2 2

X2Go Client as RDP Client (new documentation)
by Mike Gabriel 14 Apr '14

14 Apr '14

Hi all, I have just provided some information on X2Go Client and RDP [1]. This documentation has been sponsored by the Rohloff AG [2] (THANKS!!!) Greets, Mike [1] https://wiki.x2go.org/doku.php/wiki:advanced:tce:rdp [2] http://rohloff.de -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

Re: [X2Go-User] Compression not working?
by Martin Cigorraga 14 Apr '14

14 Apr '14

Hi! I started using x2Go in my LAN between different GNU+Linux systems, when connecting to the servers I have these warnings: Info: Not using NX delta compression. Info: Not using ZLIB data compression. Info: Not using ZLIB stream compression. Info: Not using a persistent cache. How can I enable them? I plan to use x2Go on connections through the internet and in some cases the upload speeds are quite limited; on other cases the whole connections are just a pain so data compression and persistent cache are features really appreciated! Best regards. -Martin

1 1

Re: [X2Go-User] Buggy File & Folder sharing
by Graham Stoddart-Stones 13 Apr '14

13 Apr '14

Hi Mike: Not sure if this ever went any further please? If so, I apologise that I have missed it..... Thank you Graham ----- Original Message ----- From: "Graham Stoddart-Stones" <gstones(a)pacifera.com> To: "Mike Gabriel" <mike.gabriel(a)das-netzwerkteam.de> Cc: "Thierry Kauffmann" <thierry.kauffmann(a)univ-montp2.fr>, x2go-user(a)lists.berlios.de, submit(a)bugs.x2go.org Sent: Friday, 14 March, 2014 7:27:34 PM Subject: Re: [X2Go-User] Buggy File & Folder sharing Package: x2goclient Tag: build-macosx Severity: important Version: 3.99.2.1 Hi Mike: Please find attached the output from strace using the latest version of the X2go client for the Mac. I again encountered the same issue of the error messages popping up re openssh-server not running, and a File Not Found. Hope this helps to narrow down this issue! Thank you Graham ----- Original Message ----- From: "Mike Gabriel" <mike.gabriel(a)das-netzwerkteam.de> To: "Graham Stoddart-Stones" <gstones(a)pacifera.com> Cc: "Thierry Kauffmann" <thierry.kauffmann(a)univ-montp2.fr>, x2go-user(a)lists.berlios.de, submit(a)bugs.x2go.org Sent: Friday, 14 March, 2014 1:53:55 PM Subject: Re: [X2Go-User] Buggy File & Folder sharing Hi Graham, hi Thierry, [I forward this bug repport to our bug tracker On Do 13 Mär 2014 15:01:42 CET, Graham Stoddart-Stones wrote: > Thierry: > > Just to confirm that we are encountering the same problem with Mac > OSX 3.5.1, X2Goclient 3.99.2.1: > > When you start up X2Goclient on the Mac, you get an error dialog: > > "sshd client not started, you'll need sshd for printing and file > sharing....." > > In OSX, openssh-server is built-in, and is activated by setting > "Enable Remote Login" in System Preferences Sharing, as many others > have noted. However, this does not stop the error dialog from > recurring every time. That leads to another error message "File > cannot be opened". If one ignores this, X2Goclient starts and runs > normally, provided one wishes to neither print locally, nor share > files from the Mac with the remote server. > > I have seen lots of other emails on this topic, suggesting that the > error message does not necessarily apply to the Mac (ie sshd is in > fact running, the error message simply means that the x2goclient > code is looking for a response from a Linux-like file (which does > not occur in the same place in OSX), similarly the "File Cannot be > opened" again refers to a file that is either not used on a Mac, or > is in a wholly different location from where that file is actually > stored on a Mac. I have not seen this point formally answered > anywhere. > > For me, the concern is that, whether sshd is running on the Mac or > not, File Sharing does not appear to be working. I am not > sufficiently familiar with X2Go nor with the Mac to know where to > look on the server for the Mac shared folders, but I do know that > there is nothing under "media", as there is with Linux and a PC, > which is where I normally look. Again, I have searched the bulletins > and forums, and often seen this point raised - I have just not found > the answer on how to get round it. > > So, am keen to see how you get on, and whether anybody else can > please shed any light! Can you cross-check the observed problem with latest X2Go Client [1]??? Can you launch X2Go Client from a terminal on Mac OS X and use a tool like strace (if that exists) and check its output for pointers to file-not-found errors? That would be really helpful for tracking down this issue. Mike [1] http://code.x2go.org/releases/binary-macosx/x2goclient/releases/4.0.1.3/ -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 1

X2Go isn't working over ssh with my keyfile
by Daniela Meyer 13 Apr '14

13 Apr '14

3 2

Re: [X2Go-User] [X2Go-Announcement] X2Go Client (4.0.2.0) released
by Nigra Truo 11 Apr '14

11 Apr '14

Thanks Mike for all the hard work on the new release! It is appreciated! Markus On Thu, Apr 10, 2014 at 5:08 AM, Mike Gabriel < mike.gabriel(a)das-netzwerkteam.de> wrote: > Dear all, > > the X2Go project is proud to announce a new release of the X2Go > component ,,x2goclient''. > > New gains of this version of ,,x2goclient'' are: > > o Fully support building againt libssh 0.6.x. > o Provide solution for Google Authenticator support. > o Provide a better help window. > o Show changelog and git-log on the terminal > (new options: --changelog, --git-info). > o More improvement for the Mac OS X keyboard. > o Fix of multimonitor support on Linux. > o Use QNetworkAccessManager class for the > communicatio with a broker http(s) server. > o Allow OTP authentications against http(s) brokers > o Fix pulseaudio integration on Windows (Big thanks > to Mike#2 for the debugging effort and the communication > to pulseaudio upstream!!!) > > Above all, Mike#2 (Michael DePaulo) has been very busy on testing > and improving the MS Windows builds of X2Go Client. Thanks a lot for > this!!! You have become a highly valuable member of the X2Go developers > team. Good to have you on board!!! > > > X2Go Component: x2goclient > Version: 4.0.2.0 > Status: RELEASE > Date: Thu, 10 Apr 2014 13:47:56 +0200 > Fixes these bug report(s): 138 349 422 440 446 448 453 > Changes: > x2goclient (4.0.2.0) RELEASED; urgency=low > . > [ Oleksandr Shneyder ] > * New upstream version (4.0.2.0): > - Revrite SSH Classes to support libssh fix. > - Add Class HelpDialog to show options in scroll area. > - Fix authentication on SSH Broker with key + passphrase. > - Set modmap timer timeout to 10 sec on Mac. > - Fix running xmodmap if X2Go Client not started from terminal. > - Setting keyboard modifiers with xmodmap. > - Fix multimonitor support on Linux. > - Display more version info. Parameters --version, --git, --changelog. > - Don't show GUI dialog for --version, --help, etc, if started > from terminal on linux and mac. > - If no user in session config, display system username in pass form. > - Check if txt/changelog and txt/git exist on config phase. > Rename option "--git" to "--git-info". > - Change x2goclient.nsi for nightly builds. > . > [ Josh Lukens ] > * New upstream version (4.0.2.0): > - Switch to QNetworkAccessManager. Appropriately set content type > header to "application/x-www-form-urlencoded" for HTTP post > requests. (Fixes: #440, #138). > - Fix copy+paste errors in QNetworkAccessManager code. > - Provide support for dynamic authentication IDs. This is > a requirement for using the broker client against brokers > that use some sort of OTP authentication mechanism. > (Fixes: #446). > . > [ Mike Gabriel ] > * New upstream version (4.0.2.0): > - Drop create_text.sh again, implement changelog copying > in distro build files. Implement Git history creation for > nightly builds in build scripts. > - Rename txt/git to txt/git-info (make it compliant with cmdline > options). > - Allow starting shadow sessions from the command line with > option --hidden being enabled. (Fixes: #349). > * debian/control: > + Build-depend on libssh-dev (>= 0.5.4-2). > + Bump Standards: to 3.9.5. No changes needed. > * debian/rules: > + Copy debian/changelog into txt/ subfolder during dh_auto_configure. > + Create txt/git-info files for ChangeLog.git if it exists. > * x2goclient.spec: > + Copy ChangeLog (or debian/changelog) into txt/ subfolder during > %setup. > + Copy ChangeLog.gitlog (if present) into txt/ subfolder during > %setup. > + B-R (epel-7): man2html-core (same as for Fedora builds). > . > [ Mike DePaulo ] > * New upstream version (4.0.2.0): > - Decrease HelpDialog's tab width from 320 to 30 > (the width of 10 spaces.) (Fixes: #453) > - Windows: Fix compatibility with PulseAudio 3.0 & later through > new cookie handling. (Fixes: #422) > - Windows: Upgrade included PulseAudio from 1.1 to 5.0. > The 5.0 build is patched for X2Go bug #363. and available here: > https://build.opensuse.org/project/show/home:mikedep333: > branches:home:\ > mkbosmans:mingw32:pulseaudio > - Windows: Reapply KDE on Windows's patch for Pageant support to > libssh 0.5.5. (Fixes: #448) > > > Regards, > Mike Gabriel > > -- > > DAS-NETZWERKTEAM > mike gabriel, herweg 7, 24357 fleckeby > fon: +49 (1520) 1976 148 > > GnuPG Key ID 0x25771B31 > mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de > > freeBusy: > https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das- > netzwerkteam.de.xfb > > _______________________________________________ > X2Go-Announcement mailing list > X2Go-Announcement(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-announcement >

4 4

Re: [X2Go-User] Problem resuming the session
by Borys Saulyak 09 Apr '14

09 Apr '14

X2goserver 4.0.1.13 X2goclient 4.0.1.3 Server is running on sles11sp2 Client is on opensuse 12.2 On 9 Apr 2014 03:21, "GZ Nianguan E.T.opensource(a)gznianguan.com" <opensource(a)gznianguan.com> wrote: Hi, What client and server OS, and what is the exact version number of your client and server side packages? On 04/01/2014 05:17 PM, Borys Saulyak wrote: > Hi guys, > > > I have quite often a problem to resume a session that was suspended after unexpected disconnect of the client. > In most of the cases it does not work. > > On the client side I get this: > Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. > Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. > Loop: PANIC! The remote NX proxy closed the connection. > Loop: PANIC! Failure negotiating the session in stage '7'. > Loop: PANIC! Wrong version or invalid session authentication cookie. > Loop: PANIC! The remote NX proxy closed the connection. > Loop: PANIC! Failure negotiating the session in stage '7'. > Loop: PANIC! Wrong version or invalid session authentication cookie. > Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. > Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. > Loop: PANIC! The remote NX proxy closed the connection. > > > On the server side I see this: > Apr 1 07:09:00 xxx /usr/local/bin/x2gosetkeyboard: Setting X keyboard according to /home/dadfmg/.x2go/C-dadfmg-77-1396335925_stDKDE_dp24/keyboard > Apr 1 07:11:32 xxx sshd[9739]: Accepted keyboard-interactive/pam for dadfmg from 10.10.1.13 port 59401 ssh2 > Apr 1 07:11:34 xxx /usr/local/bin/x2gosuspend-session: session with ID dadfmg-77-1396335925_stDKDE_dp24 has been suspended successfully > Apr 1 07:11:36 xxx /usr/local/bin/x2goresume-session: client 10.10.1.13 has successfully resumed session with ID dadfmg-77-1396335925_stDKDE_dp24 > Apr 1 07:11:36 xxx sshd[9742]: error: connect_to localhost port 30081: failed. > Apr 1 07:11:36 xxx sshd[9742]: channel_by_id: 0: bad id: channel free > Apr 1 07:11:36 xxx sshd[9742]: Disconnecting: Received ieof for nonexistent channel 0. > > I am on the latest version of client/server. > > I also noticed that I can achieve the same result if I suspend the session and then try to resume it by login in to the server via ssh and executing x2goresume-session <sessionid> > In this case even healthy and cleanly suspended session get screwed. > So far I was not able to figure out how can I get the session back. It just does not work. I found a workaround for the time being which is to connect via local desktop (desktop sharing). This works even if session is screwed, but this is not what I want. I would like to get my session resumed correctly no matter what happened. Is this a known bug? Or is it only happening to me? I would really appreciate any help! X2GO is a great project and it has a great potential! > > Thanks in advance for any help! > _______________________________________________ X2Go-User mailing list X2Go-User(a)lists.berlios.de https://lists.berlios.de/mailman/listinfo/x2go-user

1 0

Problem resuming the session
by Borys Saulyak 09 Apr '14

09 Apr '14

Hi guys, I have quite often a problem to resume a session that was suspended after unexpected disconnect of the client. In most of the cases it does not work. On the client side I get this: Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Loop: PANIC! The remote NX proxy closed the connection. Loop: PANIC! Failure negotiating the session in stage '7'. Loop: PANIC! Wrong version or invalid session authentication cookie. Loop: PANIC! The remote NX proxy closed the connection. Loop: PANIC! Failure negotiating the session in stage '7'. Loop: PANIC! Wrong version or invalid session authentication cookie. Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Loop: WARNING! Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Loop: PANIC! The remote NX proxy closed the connection. On the server side I see this: Apr 1 07:09:00 xxx /usr/local/bin/x2gosetkeyboard: Setting X keyboard according to /home/dadfmg/.x2go/C-dadfmg-77-1396335925_stDKDE_dp24/keyboard Apr 1 07:11:32 xxx sshd[9739]: Accepted keyboard-interactive/pam for dadfmg from 10.10.1.13 port 59401 ssh2 Apr 1 07:11:34 xxx /usr/local/bin/x2gosuspend-session: session with ID dadfmg-77-1396335925_stDKDE_dp24 has been suspended successfully Apr 1 07:11:36 xxx /usr/local/bin/x2goresume-session: client 10.10.1.13 has successfully resumed session with ID dadfmg-77-1396335925_stDKDE_dp24 Apr 1 07:11:36 xxx sshd[9742]: error: connect_to localhost port 30081: failed. Apr 1 07:11:36 xxx sshd[9742]: channel_by_id: 0: bad id: channel free Apr 1 07:11:36 xxx sshd[9742]: Disconnecting: Received ieof for nonexistent channel 0. I am on the latest version of client/server. I also noticed that I can achieve the same result if I suspend the session and then try to resume it by login in to the server via ssh and executing x2goresume-session <sessionid> In this case even healthy and cleanly suspended session get screwed. So far I was not able to figure out how can I get the session back. It just does not work. I found a workaround for the time being which is to connect via local desktop (desktop sharing). This works even if session is screwed, but this is not what I want. I would like to get my session resumed correctly no matter what happened. Is this a known bug? Or is it only happening to me? I would really appreciate any help! X2GO is a great project and it has a great potential! Thanks in advance for any help!

3 3

Re: [X2Go-User] Problem resuming the session
by Borys Saulyak 08 Apr '14

08 Apr '14

Thanks Mike. On 8 Apr 2014 22:04, Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> wrote: Hi Borys, On Di 08 Apr 2014 13:55:10 CEST, Borys Saulyak wrote: > Is there any chance that somebody will have a look at this problem? > I cannot resume the sessions in 50% of the times. It is almost > unusable. I added the info how to reproduce to the #302. I'll see what I can do during the next two weeks. Stay tuned... Mike -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

X2Go Ubuntu upgrade stuck at "Cleaning up stale X2Go sessions"
by Jason Heeris 03 Apr '14

03 Apr '14

Hi, I'm using X2Go (4.0.1.14-0~842~ubuntu13.10.1) on Ubuntu 13.10. I let Ubuntu's update manager upgrade the package yesterday, and it got stuck at: * Cleaning up stale X2Go sessions. I killed the upgrade process, rebooted and ran "sudo dpkg --configure -a", and once again, it's stuck at the same point. Is there anything I can do manually to let the update proceed past this point? — Jason Heeris

2 1

Re: [X2Go-User] [X2Go-Dev] Bug#471: Bug#471: ATTENTION @Mike#1 - serious bug in x2goserver upgrade script (debian wheezy+squeeze)
by Stefan Baur 03 Apr '14

03 Apr '14

Further Info: 1) I'm guessing it's a race condition, with two instances of x2gocleansessions running simpultaneously and locking each other up: e.g. sample output: ps ax|grep clean 1995 ? S 0:36 /usr/bin/perl /usr/sbin/x2gocleansessions 16142 pts/0 S+ 0:05 /usr/bin/perl /usr/sbin/x2gocleansessions 2) The kill command given below in my previous e-mail doesn't work. What worked was this: ps ax | grep x2gocleansessions | grep perl \ | awk ' { print $1 }' | xargs -n 1 kill (the backslash is so it can be broken up in two lines) You have to run this in a second terminal session (as root) while the apt-get upgrade process is stuck in the first. It will then continue without reporting an error. -Stefan Am 03.04.2014 09:52, schrieb Stefan Baur: > Gah. E_NOTENOUGHCAFFEINE. This was supposed to go to the list and > bugtracker as well. > > > -------- Original-Nachricht -------- > Betreff: Re: [X2Go-Dev] Bug#471: ATTENTION @Mike#1 - serious bug in > x2goserver upgrade script (debian wheezy+squeeze) > Datum: Thu, 03 Apr 2014 09:50:09 +0200 > Von: Stefan Baur <newsgroups.mail2(a)stefanbaur.de> > Antwort an: Stefan Baur <newsgroups.mail2(a)stefanbaur.de>, > 471(a)bugs.x2go.org, x2go-dev(a)lists.berlios.de > An: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> > > Addendum: > > This is part of the "ps ax" output on one of the affected machines: > > 2563 pts/2 S+ 0:00 apt-get upgrade -y > 4958 pts/1 S+ 0:00 /usr/bin/perl -w /usr/share/debconf/frontend > /var/lib/dpkg/info/x2goserver.postinst configure 4.0.1.13-0x2go1+ > 4962 pts/1 Z+ 0:00 [x2goserver.post] <defunct> > 5004 pts/1 S+ 0:00 /usr/bin/perl /usr/sbin/x2gocleansessions > > manually killing x2gocleansessions (" kill $(pidof x2gocleansessions)") > seems to be a workaround, but still, we need a real fix in the form of > an updated package. > > -Stefan > > Am 03.04.2014 08:47, schrieb Stefan Baur: >> Package: x2goserver >> Severity: grave >> Version: 4.0.1.14 >> >> Hi Mike, >> >> this is happening on >> >> x2goserver (4.0.1.14-0x2go1+git20140402.842+squeeze.main.1) >> >> as well. >> >> Please help! All my machines are stuck in the upgrade process! This is >> not good! >> >> -Stefan >> >> >> -------- Original-Nachricht -------- >> Betreff: [X2Go-User] Unable to upgrade >> Datum: Wed, 2 Apr 2014 19:14:53 +0300 >> Von: Panayotis Katsaloulis <panayotis(a)panayotis.com> >> An: x2go-user(a)lists.berlios.de >> >> Hello all! >> >> I have installed x2go, I can connect - everything is fine. >> In the past I think there was a problem when I tried to launch a client >> (as xterm session), and which I was unable to properly close, so I >> forced close it. >> >> The problem is that I am unable to upgrade through apt-get upgrade though. >> >> Now when I try to upgrade I get this message: >> >> Processing triggers for menu (2.1.46) ... >> Setting up x2goserver (4.0.1.14-0x2go1+git20140402.842+wheezy.main.1) ... >> Group x2gouser already exists. >> User x2gouser already exists. >> [info] Cleaning up stale X2Go sessions.. >> >> … and the screen remains like this forever. >> >> The uname -a command produces the following result: >> >> Linux danube 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 >> GNU/Linux >> >> Any help? >> >> -- >> Panayotis >> >> >> _______________________________________________ >> X2Go-User mailing list >> X2Go-User(a)lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/x2go-user >> _______________________________________________ >> X2Go-Dev mailing list >> X2Go-Dev(a)lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/x2go-dev >> > _______________________________________________ > X2Go-Dev mailing list > X2Go-Dev(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-dev >

4 5

Re: [X2Go-User] X2Go-User Digest, Vol 44, Issue 2
by Nigra Truo 03 Apr '14

03 Apr '14

> > Message: 4 > Date: Tue, 01 Apr 2014 16:18:39 +0200 > From: "GZ Nianguan E.T." <opensource(a)gznianguan.com> > To: x2go-user(a)lists.berlios.de > Subject: Re: [X2Go-User] X2Go-User Digest, Vol 43, Issue 24 > Message-ID: <lhehs0$815$1(a)ger.gmane.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi, > > I cant remember ever having to start something on the local display... > Just make sure you log in with the same user on X2Go and you are logged > in with on the local display.... > > In the X2Go connection settings, under "Session Type" select "Connect > to local desktop" then when you log in you should see a list of local > displays you can connect to... at least you should see one (:0) if > there is a local X running.. Oh, thanks! I did not even see that setting and it does work, I just tried it. But it is always read only in my case, I cannot click on anything or move windows, even if I set full access. Markus

2 1

Re: [X2Go-User] Unable to upgrade
by Andreas Yankopolus 03 Apr '14

03 Apr '14

I'm having the same problem on my Ubuntu 13.10 system. $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.10 Release: 13.10 Codename: saucy $ uname -a Linux phobos 3.11.0-19-generic #33-Ubuntu SMP Tue Mar 11 18:48:34 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

2 2

Printing on RHEL 6.5 Server
by Eric Work 03 Apr '14

03 Apr '14

I'm trying to print from a RHEL 6.5 server running both x2goserver and cups to a Fedora 20 client. Both are running x2go 4.0.1.3. I have installed the x2goserver-printing and cups-x2go packages for RHEL. I have added the virtual printer to the cups server. On the client I have setup printing to show the dialog and start evince to view the PDF. When I attempt to print something, select the virtual printer, then click print, nothing happens. I see a pdf file in the cups spool directory but nothing in the client spool directory. When I attempt to manually copy the pdf file to this directory nothing happens. Maybe this is expected. I see from strace that x2goclient is reading the contents of the client spool directory and the number of files changes but it doesn't do anything. Is there something related to fuse and sshfs that prevents the cups/x2goserver processes from copying over the generated PDF? Is copying the file to the client spool directory not enough? Is there some other sort of signal passed from the server to the client to initiate printing? Below are the log messages I get when I try to print, which doesn't seem to have any clear error messages. Apr 2 22:33:31 XXX /usr/lib/cups/backend/cups-x2go[6070]: Print job received from cups -> 5 YYY Google 1 Resolution=300dpi number-up=1 PageSize=Letter job-uuid=urn:uuid:c5c9e233-bfff-31c5-69e9-9ebed5ec4207 job-originating-host-name=localhost Apr 2 22:33:31 XXX /usr/lib/cups/backend/cups-x2go[6070]: Print job comes from STDIN, writing incoming job to temp file /tmp/5-YYY-cupsjob6070 Apr 2 22:33:31 XXX /usr/lib/cups/backend/cups-x2go[6070]: Converting printjob with command: /usr/bin/gs -q -dCompatibilityLevel=1.4 -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="/tmp/5-YYY-cupsjob6070.pdf" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -dDoNumCopies -c .setpdfwrite -f "/tmp/5-YYY-cupsjob6070" Apr 2 22:33:32 XXX /usr/bin/x2golistsessions[6073]: x2golistsessions has been called with options: --all-servers Apr 2 22:33:32 XXX /usr/bin/x2goprint[6081]: x2goprint has been called with options: YYY YYY-50-1396503119_stDGNOME_dp24 YYY-50-1396503119_stDGNOME_dp24_5-YYY-cupsjob6070.pdf YYY-50-1396503119_stDGNOME_dp24_5-YYY-cupsjob6070.pdf.title Apr 2 22:33:32 XXX /usr/bin/x2goprint[6081]: x2goprint is processing /var/spool/x2goprint/YYY-50-1396503119_stDGNOME_dp24_5-YYY-cupsjob6070.pdf with print job title ,,Google'' Any help would be appreciated. -Eric

1 0

Keyboard mapping hosed with latest update
by Andreas Yankopolus 03 Apr '14

03 Apr '14

I've run into the same problem as Panayotis with x2goserver freezing on "cleaning up stale x2go sessions" during the upgrade process. I can break out from that, but connecting from the Windows x2go client v4.0.1.3 results in a keyboard mapping that's completely hosed: q maps to y, w maps to t, etc.

1 0

Unable to upgrade
by Panayotis Katsaloulis 02 Apr '14

02 Apr '14

Hello all! I have installed x2go, I can connect - everything is fine. In the past I think there was a problem when I tried to launch a client (as xterm session), and which I was unable to properly close, so I forced close it. The problem is that I am unable to upgrade through apt-get upgrade though. Now when I try to upgrade I get this message: Processing triggers for menu (2.1.46) ... Setting up x2goserver (4.0.1.14-0x2go1+git20140402.842+wheezy.main.1) ... Group x2gouser already exists. User x2gouser already exists. [info] Cleaning up stale X2Go sessions.. … and the screen remains like this forever. The uname -a command produces the following result: Linux danube 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux Any help? -- Panayotis

1 0

Re: [X2Go-User] X2Go-User Digest, Vol 43, Issue 24
by Nigra Truo 01 Apr '14

01 Apr '14

> > > I do think you need OpenCL to work with the GPU of the ATI card... > > http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/GPU_Rendering > Yes, you will need OpenCL, but it more complicated than this: for some reason, OpenCL is deactivated in Blender on Linux. There is no way to find out why, there are threads with like 18237823 posts where I could not gather what the status now is. > > Though I suspect that could also cause trouble by trying to use the GPU > for the "work view" too.... > It could be that it already, all by it self figure out that it wants to > use your ATI card? > > If you open a xterm in the X2Go session and crank this: > "blender -d -f 1 -b" does it render a cube to your /tmp/ ? > > > Yes, just tried that. That does render a cube. > Btw. how would X2Go shadowing :0 work for you? > > > > I'm not familiar with shadowing or what that means. Do you mean running x2godesktopsharing on the physical display on the server and then connecting to it via X2goclient? I was not even aware that x2godesktopsharing worked already, just tried that out. Is there a way to enable desktop sharing for every session automatically? > Just skimmed through the doc... looking forward to see the videos. > I will do these in the next days. I thought it might be cool to be able to show somebody what the whole process looks like, visually demonstrate what X2go can do. As they say in German: Ein Bild sagt mehr als tausend Worte. A Picture is speaks more than a thousand words. But well, video has more than a thousand words per frame, so 24 fps, that would be more than 24k words per second ;-) I guess applying cold math to a artistic proverb might not work. > As for IRC... make sure you are on a freenode server... then enter #x2go > rom > What IRC client are you using? > You should always see a bunch of other users.... but quite often it can > be a very quiet place... > > I'm using the one that gets bundled with KDE, don't know how it is called. I will log in and stay online 24/7, I think that should do the trick. Thanks, Markus

2 3

Again x2go and network manager
by Buddy Butterfly 31 Mar '14

31 Mar '14

Hi guys, sorry to warm up this topic again. We upgraded to Kubuntu 13.10. Now network manager is again not working. Because of the problems of the earlier Ubuntu versions we already have corrected all .../polkit-1/actions to the same for interactive. Now we are not able to activate the network manager again. We do need to have a this gui for vpn etc. We are lost. Any ideas? Thanks, Matt

2 2

Re: [X2Go-User] X2Go-User Digest, Vol 43, Issue 23
by Nigra Truo 30 Mar '14

30 Mar '14

Hi Mike, we talked some month back about me helping with some X2go documentation. I wrote some things, kinda like a newbie intro, please see here: https://docs.google.com/document/d/1ioso0_lZkIQrgYkhvbaZg8PBgwqG9u-uEDWtG5z… I don't know how the wiki works and how to get write access to it, otherwise I would include it right away. I logged into the IRC chatroom, but I don't know if I did it correctly (my first time on IRC ever), because I saw nobody else online. It might be easier to discuss this over IRC, but I would have to see about timing (my time zone is PST) In the linked document, you see that I mention 2 Videos, one about a typical X2go session and one about how Thinclient looks like, I still have to do these video. Thanks, Markus On Sun, Mar 30, 2014 at 3:00 AM, <x2go-user-request(a)lists.berlios.de> wrote: > Send X2Go-User mailing list submissions to > x2go-user(a)lists.berlios.de > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.berlios.de/mailman/listinfo/x2go-user > or, via email, send a message with subject or body 'help' to > x2go-user-request(a)lists.berlios.de > > You can reach the person managing the list at > x2go-user-owner(a)lists.berlios.de > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of X2Go-User digest..." > > > Today's Topics: > > 1. Re: Win32 X2Go Client: Please Test nightly 4.0.2.0 build with > newer dependencies (Mike Gabriel) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 29 Mar 2014 21:58:25 +0000 > From: Mike Gabriel <mike.gabriel(a)das-netzwerkteam.de> > To: Stefan Baur <newsgroups.mail2(a)stefanbaur.de> > Cc: x2go-user(a)lists.berlios.de > Subject: Re: [X2Go-User] Win32 X2Go Client: Please Test nightly > 4.0.2.0 build with newer dependencies > Message-ID: > < > 20140329215825.Horde.pv6vFaMgy1wVTB-AaVJBHA1(a)mail.das-netzwerkteam.de> > > Content-Type: text/plain; charset="utf-8"; Format="flowed"; > DelSp="Yes" > > HI Stefan, > > On Fr 21 M?r 2014 08:36:12 CET, Stefan Baur wrote: > > > Am 21.03.2014 02:22, schrieb Mike Gabriel: > > > >> And for the Mac users: we recently set up nightly builds for the > >> Mac OS X version of X2Go Client. Please also test these .dmg > >> installers [1]. Give feedback to Oleksandr Shneyder if you observe > >> any issues with the Mac OS X version. > > > > Does that mean we won't be needing my Mac mini any more? > > Or did you set this up on my machine? :-) > > the nightly builds run on Alex's Mac. But the release builds should be > built on your Mac Mini (as Clemens is doing those). > > Mike > -- > > DAS-NETZWERKTEAM > mike gabriel, herweg 7, 24357 fleckeby > fon: +49 (1520) 1976 148 > > GnuPG Key ID 0x25771B31 > mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de > > freeBusy: > > https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x… >

3 2

Re: [X2Go-User] X2Go-User Digest, Vol 43, Issue 21
by Nigra Truo 30 Mar '14

30 Mar '14

> Date: Thu, 27 Mar 2014 12:25:04 +0100 > From: "GZ Nianguan E.T." <opensource(a)gznianguan.com> > To: x2go-user(a)lists.berlios.de > Subject: Re: [X2Go-User] Running Blender 3d in X2go > Message-ID: <lh11q1$kue$1(a)ger.gmane.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi, > > May I ask what's your particular use case for Blender3D via X2Go? > I cant imagine working on 3D modelling via X2Go being a very productive > solution. > > If your just using remote machine for render and not design... there is > better ways to do that... from the command line. > We got some code laying around somewhere, for blander render clusters... > though its a bit old and I'm not sure if it works even with the current > version of blender... Though if that's what you need shoot me a private > e-mail and I'll see if we can help you out. > > > -GZNGET > > Hi, thanks for the reply. I indeed do network rendering. I'm using the official network rendering plugin of Blender. It allows to set a master server, that coordinates all the rendering effort. Then you set slaves that do the actual rendering and connect to the master. Then, from a blender instance set to client, you can send render requests to the master and that then distributes it around to the slaves. I have some GPUs sitting around that I want to attach to x2go servers and use them as slaves. So you run at least 3 instances of blender with these 3 different roles. The configuration in Blender for this cannot be done on the command line so far (the render script is still marked as experimental) and for this I need to start up blender with the interface, which I cannot. I did setup some .blend files that are set on master and slave to run these via the command line, but that no longer works for some reason. It might be that the config got changed, but I cannot even get into the GUI to check. The funny thing is that before I had the ATI card in the X2go server, it worked flawlessly. The GUI rendering was not fluid, but pretty usable. Now that I installed the proprietary drivers on it and X is running on the server (a strange requirement in order to use GPU rendering at all), blender segfaults. I would be interested in the rendering script that you might have, but I won't be able to use it if I cannot set the configuration on the server to use the right compute device, and so far it looks like blender, as GUI program does not offer the full configuration options on the command line. Thanks, Markus > From: Marcus Moeller <marcus.moeller(a)gmx.ch> > To: x2go-user(a)lists.berlios.de > Subject: Re: [X2Go-User] LXDE window decoration flickers > Message-ID: <5335120C.1030205(a)gmx.ch> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > X2Go-User mailing list > X2Go-User(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-user > > End of X2Go-User Digest, Vol 43, Issue 21 > ***************************************** >

2 1

Win32 X2Go Client: Please Test nightly 4.0.2.0 build with newer dependencies
by Michael DePaulo 29 Mar '14

29 Mar '14

As mentioned in this thread:, https://lists.berlios.de/pipermail/x2go-dev/2014-March/007075.html I have prepared a X2Go Client build with newer dependencies. It is incompatible with Windows XP. Here it is http://code.x2go.org/releases/binary-win32/x2goclient/heuler/mingw32-4.4/qt… I am asking for testers. If you do encounter a bug, please see if you can reproduce the bug on this build without the new dependencies: http://code.x2go.org/releases/binary-win32/x2goclient/heuler/mingw32-4.4/qt… (Note: Both builds do have PulseAudio 5.0. That's the only updated dependency in the latter compared to 4.0.1.3+build2 .) Also, you may notice that the file size is smaller for the build with new dependencies. That is because I removed unnecessary files from VcXsrv. Details here: http://wiki.x2go.org/doku.php/wiki:development:build-howto-mswin:x2goclient… -Mike#2

3 3

LXDE window decoration flickers
by Marcus Moeller 28 Mar '14

28 Mar '14

Hi all. I have installed x2goserver on a Fedora 20 machine. In general, it works like charm, but on a LXDE session, the window decoration flickers on mouse over. Is there a way to get rid of this flickering? Greets Marcus

3 3

x2go server for windows
by Dmitri Chebotarov 27 Mar '14

27 Mar '14

Hello, I¹m looking for info on x2go server for windows. Is there a package available for XP/7/8/Server? I was in a NetApp class last week. We did our labs in a VM environment and used x2go to access RedHat and Windows 2012 VM, which worked nicely. I would like to try to implement x2go in my environment. I support a Virtual Computer Lab (VCL) at GMU and x2go looks very interesting as access method. Currently we use RDP protocol to access VMs - Windows and Linux (xRDP). -- Thank you, Dmitri Chebotarov VCL Sys Eng, Engineering & Architectural Support, TSD - Ent Servers & Messaging 223 Aquia Building, Ffx, MSN: 1B5 Phone: (703) 993-6175 | Fax: (703) 993-3404

7 8

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user