- x2go-user - X2Go ListServ

Re: [X2Go-User] Pb with x2go agent on ppc64 system
by brian mullan 11 Jun '14

11 Jun '14

Sebastien... I don't use Fedora but I would think this works there as it does on ubuntu/debian Open your terminal and type *lsof -i :30003* that command will list you the application used by that port with PID and also a userID if thats helpful for example [image: enter image description here] Also, other things to look at are: what does ifconfig tell you about the server where x2goserver is running? what IP address is it? Does the machine have more than 1 network interface? what are the IP addr of each? Are there any virtual machines running on that server? what are their IP addresses What's the IP address(s) on your client, is it running any virtual machines? What does traceroute tell you about the path to 225.3.10.80 Brian

1 0

Re: [X2Go-User] Failing to resume session
by Michael DePaulo 08 Jun '14

08 Jun '14

(Resending this email because I accidentally CC'd lists.berlios.de). Hi Stephane, I need to look into this more. I'll do so over the next few days. On Fri, Jun 6, 2014 at 5:49 AM, Stephane Mutz <stephane.mutz(a)blinksight.com> wrote: > Hi Michael, > > I confirm the effect of the -nowgl option. > > I changed the setting on my windows client and could > not resume the session anymore from it while I can when > I remove the option. > > I created a new session after setting the -nowgl setting and > could resume it from my linux client. 1st, note that "WGL" is VcXsrv's (and Cygwin X11's) equivalent of nx-libs/x2goagent and X.org's "GLX". Both WGL and GLX are opengl support. "-nowgl" disables WGL. 2nd, I am a little confused. Under the github link, the X2Go user stated that disabling WGL fixed the issue. However, you are stating that enabling WGL fixes the issue. Note that I am thinking that whenever you run X2Go Client (or standalone VcXsrv) on a system that doesn't support OpenGL (including a windows desktop over RDP), then WGL is disabled automatically. > Can you explain the effect of the -extension XFIXES, -extension GLX > and -nolisten tcp just so that I know what to set properly? You can read about the 3 options here. This is the x2goserver version 4.0.1.15 version of the file: http://code.x2go.org/gitweb?p=x2goserver.git;a=blob;f=x2goserver/etc/x2goag… Basically the 2 options: -extension XFIXES -extension GLX Disable the X11 protocol extensions "XFIXES" and "GLX". Disabling both extensions maximizes compatibility with applications. If it turns out that enabling 1 or 2 of these X11 extensions (by putting a "+" instead of a "-" at the beginning) fixes compatibility with an application that you use, only then should you enable 1 or 2 of them. The option: -nolisten tcp Is important for security. Unless you have an application that depends on it, or you specifically want to export your X11 display instead of using X11 forwarding over SSH, you definitely SHOULD have that option set. You can read more here: http://superuser.com/questions/560532/what-is-the-nolisten-tcp-parameter-fo… > Do you still want me to file the bug report? > > Regards, Stephane. Yes, please do so. Note that external X server settings you are using. I have observed the issue even when you using the internal X server, so I will add details about that as I investigate. -Mike#2 On Fri, Jun 6, 2014 at 5:49 AM, Stephane Mutz <stephane.mutz(a)blinksight.com> wrote: > Hi Michael, > > I confirm the effect of the -nowgl option. > > I changed the setting on my windows client and could > not resume the session anymore from it while I can when > I remove the option. > > I created a new session after setting the -nowgl setting and > could resume it from my linux client. > > Can you explain the effect of the -extension XFIXES, -extension GLX > and -nolisten tcp just so that I know what to set properly? > > Do you still want me to file the bug report? > > Regards, Stephane. > > > > On 05/06/2014 16:30, Michael DePaulo wrote: > > It might be. It might also be related to VcXsrv's WGL option. > > Unless something comes up, I'll investigate tonight. > > Sent from my Android Smartphone > On Jun 5, 2014 9:47 AM, "Stephane Mutz" <stephane.mutz(a)blinksight.com> > wrote: >> >> Hello Michael, >> >> Could it be related to the settings of: >> -extension XFIXES >> -extension GLX >> >> Those were always obscure for me and I noticed >> a discrepency between my home computer and work computer. >> >> Also I realised I'm missing -nolisten tcp. Should I add it? >> >> I don't think any of these config settings have changed recently though. >> The appearance of the problem seems more related to an update on either >> side >> but I can't be sure. >> >> I'll post the bug report tonight. >> >> Thanks for the pointer to the workaround. I can't test it right now >> but I'll give it a try as soon as I can. >> >> Regards, Stephane. >> >> >> On 05/06/2014 15:22, Michael DePaulo wrote: >>> >>> On Thu, Jun 5, 2014 at 4:07 AM, Stephane Mutz >>> <stephane.mutz(a)blinksight.com> wrote: >>>> >>>> Hello, >>>> >>>> Since a few weeks, I can't resume a session that was created >>>> at work from my home computer. When I connect and select >>>> the session to resume, I get an error popup: >>>> >>>> Failed to restore all the required visuals. >>>> >>>> Can't resume the NX session on this display. >>>> >>>> This setup was working for months so I assume it is due to an >>>> update. >>>> At home, I'm using a Linux Mint with 4.0.2.0 X2GO client. >>>> At work, the client is running on Windows7 (version 4.0.2.0 as well). >>>> >>>> Any clue about what could be causing the problem? >>>> >>>> Regards, Stephane. >>> >>> Hi Stephane, >>> >>> I have seen this error myself. Could you please submit a bug report >>> for package "x2goclient"? >>> http://wiki.x2go.org/doku.php/wiki:bugs >>> >>> I will look into it further. It looks like some people have identified >>> a fix or workaround: >>> https://github.com/stowler/imagingcore/issues/16 >>> >>> Also, FYI, this was discussed previously: >>> https://lists.berlios.de/pipermail/x2go-user/2014-April/002201.html >>> >>> -Mike#2 >> >> > >

1 0

X2go on docker :)
by paim pozhil 03 Jun '14

03 Jun '14

Hi All Based on the LXC- x2go implementation ideas from : http://bmullan.wordpress.com/2013/11/20/configure-x2go-remote-desktop-capab… Ive created this docker setup . It runs a xubuntu system with x2go , We could even streamline this even further with just Xfce or lubuntu however I wanted to post to this mailing list what I have for now. https://github.com/paimpozhil/DockerX2go Please test/ feel free to re-use or fork :) -- Paim Pozhil

4 11

Centos Image for Docker - x2go project
by paim pozhil 03 Jun '14

03 Jun '14

Hi All I've built a centos image today and it works very nicely. feedbacks welcome https://github.com/paimpozhil/DockerX2go/tree/master/centos -- Paim Pozhil

1 0

ubuntu 14.04 desktop black screen on connect
by Cristina Tanzi Tolenti 03 Jun '14

03 Jun '14

Hi, I install x2goserver on my new desktop Ubuntu 14.04 (gnome-shell) and I would like to connect it with another Ubuntu or Windows over my lan. I choose gnome as session and when I try to connect I obtain a black screen. Help me please!! :-) Thanks Cristina

2 2

Problems "Installation of the X2Go TCE based on Debian"
by Víctor Jiménez 02 Jun '14

02 Jun '14

Hello, I would need your help I followed the wiki “Installation of the X2Go TCE based on Debian“,and I have not got that the thinclient starts the OS I’ve had two cases: Not installed “Provide firmware for certain hardware”: - ThinClient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, but nothing appears, only this message: *[ 2.129610] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 2.129951] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 2.130546] sd 2:0:0:0: [sda] Assuming drive cache: write through* Installed “Provide firmware for certain hardware”: When I add the repository *deb http://ftp.debian.org/debian <http://ftp.debian.org/debian> <distro-codename> main contrib non-free* and install: * apt-get install firmware-linux-nonfree firmware-bnx2 firmware-bnx2x firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek intel-microcode amd64-microcode. * Display this error: *Processing triggers for man-db ...* *locale: Cannot set LC_CTYPE to default locale: No such file or directory* *locale: Cannot set LC_MESSAGES to default locale: No such file or directory* *locale: Cannot set LC_ALL to default locale: No such file or directory* *Setting up firmware-bnx2 (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-bnx2x (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-linux-nonfree (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-myricom (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-netxen (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-qlogic (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-ralink (0.36+wheezy.1) ...* *Setting up firmware-realtek (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up iucode-tool (0.8.3-1) ...* *Setting up amd64-microcode (1.20120910-2) ...* *Updating microcode on all online processors...* *update-initramfs: deferring update (trigger activated)* *Setting up intel-microcode (1.20140122.1) ...* *Updating microcode on all online processors...* *update-initramfs: deferring update (trigger activated)* *Processing triggers for initramfs-tools ...* *update-initramfs: Generating /boot/initrd.img-3.2.0-4-486* *cryptsetup: WARNING: could not determine root device from /etc/fstab* *libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/3.13.0-24-generic/modules.dep.bin'* *intel-microcode: cpuid MSR kernel support missing* *intel-microcode: disabling IUCODE_TOOL_SCANCPUS option* I ignore the error and continue the instructions. When I turn on the thinclient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, and display this error: *[ 1.714560] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.715139] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.716151] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.762616] platform microcode: firmware: agent aborted loading intel-ucode/06-2d-02 (not dound?)* What am I doing wrong? Can you help me? Thanks

1 0

Firefox menu very slow
by Mario Giammarco 28 May '14

28 May '14

Hello, I have a kubuntu server with x2go. I reach this as full kubuntu desktop from a windows x2go client. I have just installed client and server latest versions. Unfortunately firefox (ONLY firefox) has this problem: when I click something that should open a menu the browser hangs for around a minute, then the menu appears and I can use it. What can I do? Thanks in advance for any help, Mario

1 0

X2Go Talk @ IT-Kongress, University of Applied Sciences, Neu-Ulm, Germany (2014-11-13)
by Stefan Baur 22 May '14

22 May '14

Hey everyone, I am happy and proud to announce that the X2Go project has been given the opportunity to present a few of the different use cases X2Go has to offer. More details to follow. :-) Of course, there's already a Wiki entry covering the event: http://wiki.x2go.org/doku.php/events:start?&#talk_it-kongress_university_of… -Stefan

1 0

Today: X2Go on FLOSS weekly
by Mike Gabriel 22 May '14

22 May '14

Hi all, for those who are interested... Mike#2 and Mike#1 from the X2Go developer team will be on FLOSS weekly tonight/today/this morning (depending on where you live). The show starts at 15:30h UTC (on 21st May 2014) at [1]. light+love, Mike [1] http://twit.tv/show/floss-weekly -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

2 1

Postgres configuration for load balancing
by Short, Kermit 20 May '14

20 May '14

Greetings, While I haven't been able to compile the x2go client for our IGELs, I'm pushing forward with the project using the existing version. As such, I'm trying to create a load balancing cluster, but I'm stuck adding users to the postgresql database, and I need to do a sanity check. Assumption 1: I have to manually create each user in the database for that user to have group membership and/or be able to log in and create a session on the load balanced server. Assumption 2: The x2godbadmin script must be run as root to gain access to the root-only file containing the postgres database managment user's password. If either of those assumptions are incorrect, please advise. My problem is that all of our home directories are on root-squashed NFS volumes. As the script is running under root's context, the script is unable to create ~/.x2go/sqlpass, which would seemingly prevent the user from being able to utilize any member of the load balancing cluster. Obviously, if I can simply pass through PAM credentials and LDAP lookups without the need for this information to live in a postgresql database, none of this is a problem. Likewise, if I can run the x2godbadmin script as each individual user, while extremely painful, I can write a script to do this. Am I way off in the woods on my logic here? Thanks! -- Kermit Short

1 1

Possible to use server SSH key like FreeNX?
by Jasmine Lognnes 20 May '14

20 May '14

Dear readers, In FreeNX it is possble to change the default SSH key, so in addition to have a valid username+passphrase to the host, the user also needs a SSH key. The SSH key is the same for all users. Is this also possible in x2go? Kindest regards, Jasmine =)

3 6

Re: [X2Go-User] Session suspending after resize
by Jean Gottschalk 20 May '14

20 May '14

> > Hello, > > Is someone able to help with the below? If you could just point me in the > right direction or suggest some ideas, I may be able to investigate > further... > > Jean > On May 7, 2014 7:40 AM, "Jean Gottschalk" <jean(a)gottschalk.us> wrote: > >> Hello, >> >> I am still trying to figure out why the automatic session resizing (when >> moving between clients with different screens, for example a desktop and a >> laptop) doesn't work anymore since I started using MATE. >> >> Since the latest x2goclient upgrade, I noticed the following behavior: >> when I resume a session on a client with a different screen size, the >> screen will resize, but the session immediately suspends. Then when I login >> to the same session again (on the same client, so no screen resolution >> change), the session stays up. >> >> When the session suspends, the log simply looks like this: >> >> *Session: Session resumed at 'Tue May 6 22:29:08 2014'.* >> *Info: Screen [0] resized to geometry [1280x1024] fullscreen [1].* >> *Session: Suspending session at 'Tue May 6 22:29:10 2014'.* >> >> >> And if I open the same session again (on the same screen), it just stays >> up although it reports the same resizing procedure being run: >> >> *Session: Session resumed at 'Tue May 6 22:31:38 2014'.* >> *Info: Screen [0] resized to geometry [1280x1024] fullscreen [1].* >> >> >> Not sure if this is related, but if I press CTRL+ALT+R which is the >> command to switch between auto-resize and viewport mode, the session also >> immediately suspends, and the logs show this: >> >> *Info: Disabled desktop resize mode in agent.* >> *Session: Suspending session at 'Tue May 6 22:35:46 2014'.* >> *Info: Waiting the cleanup timeout to complete.* >> *Session: Session suspended at 'Tue May 6 22:35:46 2014'.* >> >> >> Is there any additional debug information that I could see anywhere, to >> see what code is actually being executed when the session goes into resume? >> >> Jean >> >> >> >

2 1

Re: [X2Go-User] No sound on TCE
by Jean Gottschalk 19 May '14

19 May '14

> Hello, > > Is someone able to help with the below? If you could just point me in the > right direction or suggest some troubleshooting directions, I may be able > to investigate further... > > Jean > On May 7, 2014 7:21 AM, "Jean Gottschalk" <jean(a)gottschalk.us> wrote: > >> Hello, >> >> I have the following situation: >> >> I am running x2goserver 4.0.1.15 with MATE desktop. When connecting to it >> with x2goclient 4.0.2.0 running on an ubuntu laptop, I get proper sound >> being transmitted to the client. >> >> When firing up a thinclient, which seems to be running x2goclient >> 4.0.2.1, there is not sound being transmitted to the client. >> I have run padevchooser on the server, which correctly shows pulseaudio >> as connected to a sink on my thinclient hardware. I've also checked the >> alsa sound mixer on the thinclient, to make sure nothing is muted, and I >> have run "speaker-test" on the thinclient, which produces noise (so >> speakers and all that are working). >> >> Now I'm not sure what to do next? Is there any way (other than perhaps >> doing a network packet capture) to determine whether the server (running >> pulseaudio client) is properly streaming sound to the thinclient (running >> the pulseaudio server) in the scenario where I don't hear sound? >> >> Any other ideas or troubleshooting methods are appreciated. >> >> Thank you! >> >> Jean >> > >

1 0

edubuntu and x2go
by Ngainku Chanceline 18 May '14

18 May '14

hello, yesterday we try to install x2go on edubuntu virtual machine. we made a TCE installation and we try a raspberry client with raspbian and x2goblient with pxe: it load tftp and show us the progrees bar but after a while it shows us Loading. please wait--- and happens nothing more tcpdump shows no more trafic syslog says May 18 09:04:30 ed1404l-virtual-machine dhcpd: DHCPACK on 192.168.12.101 to 00:1f:16:28:f0:f1 via eth0 May 18 09:08:57 ed1404l-virtual-machine atftpd[6257]: atftpd terminating after 300 seconds May 18 09:08:57 ed1404l-virtual-machine atftpd[6257]: Main thread exiting May 18 09:17:01 ed1404l-virtual-machine CRON[8939]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 18 09:24:16 ed1404l-virtual-machine cracklib: no dictionary update necessary. with raspbian and x2goclient after login it starts but x2go does not appear and it stay doing nothing. any idea? we have an similar debian installation and it works very well. michel

1 0

Problem compiling x2goclient
by Short, Kermit 16 May '14

16 May '14

Greetings! I'm trying to work through an installation for IGEL again. Apparently I didn't take good notes the first time, so I'm trying to redo my process (I've already found some things I may not have done the first time, even though it was working). Build platform: Ubuntu Workstation LTS 12.04.3, 32-bit (fully updated as of 2014.05.14) *This is required per IGEL I've done the following so far: 1) Download and unpack the source tarball for x2goclient-4.0.2.0. 2) Installed the following prerequisites: build-essential qt4-designer qtcreator qtcreator-doc qt4-demos qt4-doc qt4-dev-tools libqt4-dev git qt-sdk libldap2-dev libssh-dev libxpm-dev libcups2-dev debhelper doxygen man2html-base 3) Run config_linux.sh (sudo /var/tmp/x2goclient-4.0.2.0/config_linux.sh NOTE I received an error at this point: make: *** No rule to make target `distclean'. Stop. Project MESSAGE: if you want to build x2goplugin you should export X2GO_CLIENT_TARGET=plugin Project MESSAGE: building x2goclient with ldap and cups RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_de.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_da.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_es.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_et.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_fi.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_fr.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_nb_no.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_nl.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_ru.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_sv.qm' RCC: Error in 'resources.rcc': Cannot find file 'x2goclient_zh_tw.qm' I didn't think distclean was a big deal, this is a freshly build VM running Ubuntu. I'm not currently set up to run the x2gowebplugin so I ignored the Project MESSAGE. The RCC errors seem to be strictly relegated to Locale stuff, so I'm ignoring them. I proceed to trying to build x2goclient itself: 4) sudo make Things go fine until an error on an ssh related object: g++ -c -pipe -O2 -Wall -W -D_REENTRANT -DQT_WEBKIT -DCFGCLIENT -D__linux__ -DQT_NO_DEBUG -DQT_SVG_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtSvg -I/usr/include/qt4 -I. -I. -I. -o sshmasterconnection.o sshmasterconnection.cpp sshmasterconnection.cpp: In member function ‘void SshMasterConnection::checkReverseTunnelConnections()’: sshmasterconnection.cpp:297:73: error: ‘ssh_channel_accept_forward’ was not declared in this scope sshmasterconnection.cpp:308:33: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] make: *** [sshmasterconnection.o] Error 1 Note in the above prereq install, I installed the libssh-dev package, but it looks to my uneducated eyes like I'm missing an ssh component for this to build against... Any ideas? To preempt the suggestion to build a deb file, IGEL does not support the installation of a deb package (dpkg doesn't exist on the firmware), so I have to have a nearly standalone tree that I can install in a custom partition on the firmware. I have been able to write a script that creates symlinks to some of the objects and libraries in this custom partition, but the binary itself has to build and reside all in one file tree. Thanks for your help!! -- Kermit Short DCS-ISS

2 2

x2go printer howto
by Neal Becker 15 May '14

15 May '14

client and server are both fedora 20. I install cups-x2go on server (and x2goserver-printing). I setup a cups-x2go printer on server on kde environment. On the client I resumed session, with printing enabled (I did not try starting a new session). On server, I can open kde printer settings and try printing a test page. It seems successful. Nothing is printed. How to debug?

3 9

x2gobroker-auth takes nearly 100% CPU
by Michael Wagenknecht 15 May '14

15 May '14

Hello all, is it OK that the process x2gobroker-auth takes nearly 100% of one CPU kernel? Best Regards, Michael

1 0

Packages file for precise-repo broken
by Jochen Schulz 15 May '14

15 May '14

Hi, the packages-file for the ubuntu precise-repo is broken as of today, because it is missing libssh-4 (and perhaps more). http://ppa.launchpad.net/x2go/stable/ubuntu/dists/precise/main/binary-amd64… Could you look into that issue? Thanks! Jochen Schulz

2 2

html5 Support Windows/OSX
by Felix Hosner 15 May '14

15 May '14

Hello Is there a way to test the HTML client plug-in (Windows / OSX)? Where can I get the appropriate plug-in's! thank you Felix -- *Notabene: * Die Zukunft soll man nicht voraussehen wollen, sondern möglich machen. Antoine de Saint Exupéry (1900-44), frz. Flieger u. Schriftsteller *Computer Coach GmbH * 3116 Kirchdorf, Thalgutstrasse 10 Tel. 031 782 12 00 Fax 031 782 12 02 fhosner(a)computer-coach.ch www.computer-coach.ch

2 1

Packages file for precise-repo broken
by Jochen Schulz 13 May '14

13 May '14

Hi, the packages-file for the ubuntu precise-repo is broken as of today, because it is missing libssh-4 (and perhaps more). http://ppa.launchpad.net/x2go/stable/ubuntu/dists/precise/main/binary-amd64… Could you look into that issue? Thanks! Jochen Schulz

1 0

X2go Broker on Trusty Tahr?
by Short, Kermit 12 May '14

12 May '14

Am I correctly seeing no x2gobroker-wsgi and x2gobroker-authservice packages in the stable PPA for Ubuntu 14.04? Thanks! -- Kermit Short

1 0

X2go and Client-Side Printing
by Michael Wagenknecht 09 May '14

09 May '14

Hello all, I try to activate the client-side printing feature. I'm using CentOS 6.5 with XFCE 4.8 and X2go version 4.0.1.10-1.el6. I installed the package x2goserver-printing-4.0.1.10-1.el6.x86_64 but there is no cups-x2go package in the repos. I do not need this package anymore? Can someone help me? Best regards, Michael

3 3

Is there a way to enable logging in x2goagent/nxagent?
by Michael DePaulo 06 May '14

06 May '14

Is there some way to enable a log like /var/log/Xorg.0.log so that I can debug an issue I have? I know about x2goserver's loglevel setting in /etc/x2go/x2goserver.conf: http://code.x2go.org/gitweb?p=x2goserver.git;a=blob;f=x2goserver/etc/x2gose… But I am looking for a way to enable logging in x2goagent/nxagent. -Mike#2

1 0

Wo finde ich die entsprechende Dokumentation?
by Felix Hosner 06 May '14

06 May '14

Hi x2go server and client I have installed this and functioning well. Now I want to optimize different points and unfortunately find the appropriate documentation in the WIKI is not. My goal: I just want individual applications to provide (example: browser). This application will then be placed on a Windows client as an icon on the desktop. What do I do? Thank you for your feedback C52 Hallo Zusammen x2go Server und Client habe ich installiert und diese Funktionieren auch. Jetzt möchte ich verschieden Punkte optimieren und finde leider die entsprechenden Dokumentationen im WIKI nicht. Mein Ziel: Ich möchte nur einzelne Applikationen zu Verfügung stellen (Beispiel: Browser). Diese Applikation soll dann auf einem Windows Client als Icon auf dem Desktop zur Verfügung gestellt sein. Wie gehe ich vor? Danke für ein Feedback C52 -- *Notabene: * Die Zukunft soll man nicht voraussehen wollen, sondern möglich machen. Antoine de Saint Exupéry (1900-44), frz. Flieger u. Schriftsteller *Computer Coach GmbH * 3116 Kirchdorf, Thalgutstrasse 10 Tel. 031 782 12 00 Fax 031 782 12 02 fhosner(a)computer-coach.ch www.computer-coach.ch

1 0

GNOME desktop from OS X
by Devin A. Bougie 22 Apr '14

22 Apr '14

Hello, The keyboard mapping is incorrect when when connecting to an EL6 system using X2Go with the GNOME desktop from OS X (using an apple keyboard). KDE, Icewm, etc. work fine. Any suggestions for using the GNOME desktop with X2Go from OS X would be greatly appreciated. Thanks, Devin

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user