x2go-user March 2021

x2go-user@lists.x2go.org

14 participants
12 discussions

mouse 1 cm too low
by richard lucassen 17 Apr '21

17 Apr '21

Hello list, I have run x2go for many years now without any problem. I have two different servers running Debian testing and x2go 4.1.0.3-5, multiple clients running the same OS and x2go client. I run WindowMaker both on client and servers. This has worked for many years. Weird thing: the active clicking point for the mouse is 1 cm above the mouse. Restarting client and server does not make any difference. AFAIK these x2go versions have not changed (underlying libraries might have of course). I tested this on a few clients: same problem. It make x2go almost unusable. Anyone a hint what to test and where to look for this weird issue? R. -- richard lucassen http://contact.xaq.nl/

2 16

Multiple connexion with the same user name
by kanssoune.saliya＠external.tractebel.engie.com 06 Apr '21

06 Apr '21

Hello everyone ! I would like to configure remote login to CentOS 7 servers using x2go and allow multiple login with the same user i.e. many users use the same ID and password to log in at the same time. Does x2go allow it? I explain below a little bit more our infra : * We use NIS as user authentication * We have more than 10 different Linux workstations * Each colleague can connect on every workstations * We use generic account for some purpose i.e. many users use the same ID and password Do you thing that this is possible to configure with x2go? If yes, what are the steps to follow? What desktop environment (MATE, XFCE, GNOME ...) will be best adapted? Thanks! ENGIE Mail Disclaimer: http://www.engie.com/disclaimer/

2 1

One application (Digikam) fails, apparently randomly
by Chris Green 02 Apr '21

02 Apr '21

Well I'm very confused now, I thought I could see a pattern but I can't. I'll report what I have discovered so far though. I'm running x2gclient 4.1.2.2 (as installed from the Ubuntu repositories) on my xubuntu 20.10 laptop. I'm running the server on my xubuntu 20.10 desktop machine, again just as installed from the Ubuntu repositories:- x2goserver: 4.1.0.3 x2goserver-common: 4.1.0.3 x2goserver-extensions: 4.1.0.3 x2goserver-fmbindings: 4.1.0.3 x2goserver-printing: 4.1.0.3 x2goserver-x2goagent: 3.5.99.24 x2goserver-xsession: 4.1.0.3 I have been trying a mix of three types of session, as follows (with results):- 1 - A small Python GUI program as a 'Single Application', this always runs without any problem at all, it just works every time. 2 - An XFCE session, this works every time and doesn't cause any major issues but it does occasionally pop-up windows in the server session as follows:- A window saying "Authentication is required to create a colour profile" and I have to enter my sudo user password. After the above pop-up I sometimes get a second one saying "Authentication is required to operate a colour managed device" The above two pop-ups only appear occasionally, usually the XFCE session just starts up and runs normally. Once I've entered my sudo password in response the session runs OK. 3 - A Digikam session as a 'Single Application', this does work sometimes but more often it appears to start OK, then xfwm4 on the *client* crashes and the Digikam session disappears even though it is still running on the desktop machine. I can't see any consistent reason for when it does work or when it doesn't work. Digikam is running from a big Appimage. Running digikam in an XFCE session running in x2go works perfectly, or at least I've not managed to crash it ever. It's only when run as a 'Single Application' that it fails. I guess I can just run Digikam in an XFCE session but I'd like to be able to just run Digikam. It's frustrating that it sometimes works but I can't see what is needed for it to work. As I said elsewhere I've run memtest on the desktop machine for two whole passes and it showed no errors. I'm happy to add debug flags to either end to see if it's possible to diagnose this. -- Chris Green

2 2

Cant start X.Org Server
by Martti Pitkanen 01 Apr '21

01 Apr '21

Hi, I experimented different settings in my Win X2Go -client, after which I started getting "x2client Cant start X.Org Server. Please check your installation." Afre that X2Go closes. I uninstalled it and removed all references to x2go by using regedit. Any idea what else I can do? Thanks, Martti Pitkanen

2 1

Error on resume/start: Call to bind failed for NX. Error is 98 'Address already in use'.
by Simon Beißer 31 Mar '21

31 Mar '21

Hello, We are frequently experiencing problems, especially with the session resume but also with the start of sessions. On x2goclient the session is terminated immediately after login with "finished". The session.log shows the following error message: Loop: PANIC! Call to bind failed for NX. Error is 98 'Address already in use'. Error: Call to bind failed for NX. Error is 98 'Address already in use'. After several login attempts or after a short wait the login is possible again without any problems. We run several X2Go installations. The problem occurs across all of our installations. We are using Ubuntu 20.04 with XFCE and the latest NXAGENT 3.5.99.26. Does anyone know this behavior? Is there already a solution? Best regards -- Simon Beißer Hetzner Online GmbH Industriestr. 25 91710 Gunzenhausen Tel: +49 9831 505-129 Fax: +49 9831 505-3 www.hetzner.com Registergericht Ansbach, HRB 6089 Geschäftsführer: Martin Hetzner Stephan Konvickova, Günther Müller Hinweise zur Verarbeitung Ihrer personenbezogenen Daten im Rahmen der Kommunikation mit Ihnen finden Sie unter www.hetzner.de/datenschutzhinweis.

1 0

First time using list - how to log on to PC with x2go after reboot?
by Carlos Alfaro 30 Mar '21

30 Mar '21

I have noticed that I can log on to a pc which has an x2go server but only after I log on, after reboot I would have to log on to get access. Any way to enable it so I can log on to the server without having to sign on first? Sort of how google remote desktop works? thanks

3 3

x2go to access Linux - issues with graphical updates
by Anonymous Japhering 18 Mar '21

18 Mar '21

X2Go Client v. 4.1.1.1 (Qt - 5.9.5) Guest Linux Mint 5.4.0-66-generic #74-Ubuntu SMP x86_64 Host Linux Mint 5.4.0-67-generic #75~18.04.1-Ubuntu SMP x86_64 Guest is where the issue is occurring.. host is where I'm working from ( x2go client is running) On Guest, I open the Linux Mint update manager. If I need to do nothing more than approve update, everything works as expected. However, if I want to change software sources or perform a version up it fails. Both items require a secondary window to be open, which doesn't happen, at least in x2goclient. Computer in question has no monitor and is only accessed through x2go (my display port adaptor died). Thoughts or suggestions ?

1 0

enable multiple login with the same user
by kanssoune.saliya＠external.tractebel.engie.com 18 Mar '21

18 Mar '21

Hello everyone ! I would like to configure remote login to CentOS 7 servers using x2go and allow multiple login with the same user i.e. many users use the same ID and password to log in at the same time. Does x2go allow it? I explain below a little bit more our infra : * We use NIS as user authentication * We have more than 10 different Linux workstations * Each colleague can connect on every workstations * We use generic account for some purpose i.e. many users use the same ID and password Do you thing that this is possible to configure with x2go? If yes, what are the steps to follow? What desktop environment (MATE, XFCE, GNOME ...) will be best adapted? Thanks! Kanssoune ENGIE Mail Disclaimer: http://www.engie.com/disclaimer/

3 2

800GB log file .xsession-x2go-...-errors
by m.herweg＠gmx.de 16 Mar '21

16 Mar '21

Hi! thank you for creating this nice free software! I tried x2go on Debian 10 server with KDE desktop. Everything worked fine out of the box until 3 days later when I noticed the server disk was full: in /home/dozent: -rw------- 1 dozent dozent 800G Mär 7 12:48 .xsession-x2go-bootserver-neu-errors [19069:19098:0307/002314.670828:ERROR:gl_surface_qt.cpp(296)] eglCreatePbufferSurface failed and surfaceless context not available [19069:19098:0307/002314.670831:ERROR:gl_surface_qt.cpp(303)] Requested OpenGL implementation is not supported. Implementation: 0 [19069:19098:0307/002314.670834:ERROR:gl_surface_qt.cpp(296)] eglCreatePbufferSurface failed and surfaceless context not available [19069:19098:0307/002314.670838:ERROR:gl_surface_qt.cpp(303)] Requested OpenGL implementation is not supported. Implementation: 0 I deleted the file and killed all processes of user "dozent" to free the disk space again. can you give me any advice how to avoid or limit those messages? Thank you!

3 5

Fw: x2go external upstream packages Debian
by andrew glaeser 13 Mar '21

13 Mar '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Begin forwarded message: Date: Sat, 13 Mar 2021 10:31:12 +0100 From: andrew glaeser <bugs(a)irregulaire.info> To: 984721(a)bugs.debian.org Subject: x2go external upstream packages - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 OK, I did check out the upstream packages of x2goserver, because of this bug in handbrake (clearly not a feature in my view, but significantly worsened functionality in an important detail): https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984967 Either I did something wrong there about pinning, or it did not work properly, but my impression is that upstream x2go-packages do no longer exist, i.e. the repository still exists, but will not deliver any new packages for bullseye release: > root@bulls-eye:~# cat /etc/apt/sources.list > # deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 > NETINST 20210301-03:04]/ bullseye main > > #deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 > NETINST 20210301-03:04]/ bullseye main > > deb http://deb.debian.org/debian/ bullseye main non-free contrib > #deb-src http://deb.debian.org/debian/ bullseye main > > deb http://security.debian.org/debian-security bullseye-security main > non-free contrib #deb-src http://security.debian.org/debian-security > bullseye-security main > > # This system was installed using small removable media > # (e.g. netinst, live or single CD). The matching "deb cdrom" > # entries were disabled at the end of the installation process. > # For information about how to configure apt package sources, > # see the sources.list(5) manual. > root@bulls-eye:~# echo "deb http://packages.x2go.org/debian buster extras > main" >> /etc/apt/sources.list root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# apt-key adv --recv-keys --keyserver keys.gnupg.net > E1F958385BFE2B6E Warning: apt-key is deprecated. Manage keyring files in > trusted.gpg.d instead (see apt-key(8)). > Executing: /tmp/apt-key-gpghome.6VPryjaYE5/gpg.1.sh --recv-keys --keyserver > keys.gnupg.net E1F958385BFE2B6E gpg: key E1F958385BFE2B6E: public key "X2go > Debian/Ubuntu Packaging <debian(a)x2go.org>" imported gpg: Total number > processed: 1 gpg: imported: 1 root@bulls-eye:~# apt update > Get:1 http://security.debian.org/debian-security bullseye-security > InRelease [44.1 kB] Get:2 http://deb.debian.org/debian bullseye InRelease > [142 kB] Get:3 http://packages.x2go.org/debian bullseye InRelease [31.2 > kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 > Packages.diff/Index [63.6 kB] Get:5 http://deb.debian.org/debian > bullseye/main Translation-en.diff/Index [63.6 kB] Get:6 > http://packages.x2go.org/debian bullseye/main amd64 Packages [12.6 kB] > Get:7 http://deb.debian.org/debian bullseye/main amd64 Packages > T-2021-03-13-0800.48-F-2021-03-12-0205.53.pdiff [58.1 kB] Get:7 > http://deb.debian.org/debian bullseye/main amd64 Packages > T-2021-03-13-0800.48-F-2021-03-12-0205.53.pdiff [58.1 kB] Get:8 > http://deb.debian.org/debian bullseye/main Translation-en > T-2021-03-13-0200.51-F-2021-03-12-0205.53.pdiff [1,663 B] Get:8 > http://deb.debian.org/debian bullseye/main Translation-en > T-2021-03-13-0200.51-F-2021-03-12-0205.53.pdiff [1,663 B] Get:9 > http://deb.debian.org/debian bullseye/main amd64 DEP-11 Metadata [4,018 kB] > Get:10 http://deb.debian.org/debian bullseye/main DEP-11 48x48 Icons [3,481 > kB] Get:11 http://deb.debian.org/debian bullseye/main DEP-11 64x64 Icons > [7,299 kB] Get:12 http://deb.debian.org/debian bullseye/contrib amd64 > DEP-11 Metadata [13.1 kB] Get:13 http://deb.debian.org/debian > bullseye/contrib DEP-11 48x48 Icons [47.2 kB] Get:14 > http://deb.debian.org/debian bullseye/contrib DEP-11 64x64 Icons [93.3 kB] > Fetched 15.4 MB in 6s (2,684 kB/s) Reading package lists... Done Building > dependency tree... Done Reading state information... Done 25 packages can > be upgraded. Run 'apt list --upgradable' to see them. root@bulls-eye:~# apt > list --upgradable Listing... Done appstream/testing 0.14.2-1 amd64 > [upgradable from: 0.14.1-1] apt-config-icons/testing 0.14.2-1 all > [upgradable from: 0.14.1-1] apt-utils/testing 2.2.1 amd64 [upgradable from: > 2.2.0] apt/testing 2.2.1 amd64 [upgradable from: 2.2.0] > desktop-base/testing 11.0.2 all [upgradable from: 11.0.1] > libappstream4/testing 0.14.2-1 amd64 [upgradable from: 0.14.1-1] > libapt-pkg6.0/testing 2.2.1 amd64 [upgradable from: 2.2.0] > libblockdev-crypto2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-fs2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-loop2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-part-err2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-part2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-swap2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev-utils2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libblockdev2/testing 2.25-2 amd64 [upgradable from: 2.25-1] > libpython3-stdlib/testing 3.9.2-2 amd64 [upgradable from: 3.9.1-1] > liburi-perl/testing 5.08-1 all [upgradable from: 5.07-1] libzstd1/testing > 1.4.8+dfsg-2.1 amd64 [upgradable from: 1.4.8+dfsg-2] mmh/testing 0.4-4 > amd64 [upgradable from: 0.4-2.1] python3-minimal/testing 3.9.2-2 amd64 > [upgradable from: 3.9.1-1] python3-pkg-resources/testing 52.0.0-3 all > [upgradable from: 52.0.0-1] python3/testing 3.9.2-2 amd64 [upgradable from: > 3.9.1-1] vim-common/testing 2:8.2.2434-3 all [upgradable from: > 2:8.2.2434-1] vim-tiny/testing 2:8.2.2434-3 amd64 [upgradable from: > 2:8.2.2434-1] xxd/testing 2:8.2.2434-3 amd64 [upgradable from: > 2:8.2.2434-1] root@bulls-eye:~# aptitude versions x2goserver p > 4.1.0.3-5 testing > 500 root@bulls-eye:~# apt install x2go-keyring && apt update Reading > package lists... Done Building dependency tree... Done > Reading state information... Done > The following NEW packages will be installed: > x2go-keyring > 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded. > Need to get 33.8 kB of archives. > After this operation, 70.7 kB of additional disk space will be used. > Get:1 http://packages.x2go.org/debian bullseye/main amd64 x2go-keyring all > 2019.08.20+git20190820.118+11.main.1 [33.8 kB] Fetched 33.8 kB in 0s (197 > kB/s) Selecting previously unselected package x2go-keyring. > (Reading database ... 164433 files and directories currently installed.) > Preparing to > unpack .../x2go-keyring_2019.08.20+git20190820.118+11.main.1_all.deb ... > Unpacking x2go-keyring (2019.08.20+git20190820.118+11.main.1) ... Setting > up x2go-keyring (2019.08.20+git20190820.118+11.main.1) ... Hit:1 > http://security.debian.org/debian-security bullseye-security InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 > http://packages.x2go.org/debian bullseye InRelease Reading package lists... > Done Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# apt search x2go > Sorting... Done > Full Text Search... Done > arctica-greeter/testing 0.99.1.5-1 amd64 > LightDM Arctica Greeter > > arctica-greeter-remote-logon/testing 0.99.1.5-1 all > LightDM Arctica Greeter - Remote Login Support > > cups-x2go/testing 3.0.1.4-1 all > Virtual X2Go printer for CUPS > > gir1.2-rda-1.0/testing 0.0.5-1 amd64 > GObject introspection data for librda > > libpam-x2go/testing 0.0.2.0-3 amd64 > PAM Module to check credentials against X2Go servers > > libpam-x2go-dev/testing 0.0.2.0-3 amd64 > PAM Module to check credentials against X2Go servers (development files) > > librda-bin/testing 0.0.5-1 amd64 > Remote Desktop Awareness (utility) > > librda-common/testing,now 0.0.5-1 all [installed,automatic] > Remote Desktop Awareness (common files) > > librda-dev/testing 0.0.5-1 amd64 > Remote Desktop Awareness (development headers) > > librda0/testing,now 0.0.5-1 amd64 [installed,automatic] > Remote Desktop Awareness (shared library) > > libx2go-config-perl/testing 4.1.0.3-5 all > Perl X2Go::Config package > > libx2go-log-perl/testing 4.1.0.3-5 all > Perl X2Go::Log package > > libx2go-server-db-perl/testing,now 4.1.0.3-5 amd64 [residual-config] > Perl X2Go::Server:DB package > > libx2go-server-perl/testing 4.1.0.3-5 all > Perl X2Go::Server package > > libx2go-utils-perl/testing 4.1.0.3-5 all > Perl X2Go::Utils package > > lightdm-remote-session-x2go/testing 0.0.2.0-2 amd64 > LightDM Remote Logon Support for X2Go sessions > > pinentry-x2go/testing 0.7.5.10-1+b1 amd64 > OpenPGP (smart)card authentication dialog window for X2Go Client > > pyhoca-cli/testing 0.6.1.2-2 all > Command line X2Go client written in Python > > pyhoca-gui/testing 0.6.1.1-1 all > Graphical X2Go client written in (wx)Python > > python-x2go-doc/testing 0.6.1.3-2 all > Python module providing X2Go client API (documentation) > > python-x2gobroker-doc/testing 0.0.4.3-1 all > X2Go Session Broker (Python3 module documentation) > > python3-x2go/testing 0.6.1.3-2 all > Python module providing X2Go client API (Python 3) > > python3-x2gobroker/testing 0.0.4.3-1 all > X2Go Session Broker (Python3 modules) > > remote-logon-config-agent/testing 0.10-1 all > Retrieve host and session information from remote broker servers > > remote-logon-service/testing 1.0.2.90-3 amd64 > DBus service for tracking available remote logon servers > > x2go-keyring/testing,now 2019.08.20+git20190820.118+11.main.1 all > [installed] GnuPG keys of all X2Go developers and the X2Go archive > > x2gobroker/testing 0.0.4.3-1 all > X2Go Session Broker (executable) > > x2gobroker-agent/testing 0.0.4.3-1 amd64 > X2Go Session Broker (remote agent) > > x2gobroker-agent-dbgsym/testing 0.0.4.3-0x2go1+git20200426.1239+11.main.1 > amd64 debug symbols for x2gobroker-agent > > x2gobroker-authservice/testing 0.0.4.3-1 all > X2Go Session Broker (PAM authentication service) > > x2gobroker-common/testing 0.0.4.3-1 all > X2Go Session Broker (common files) > > x2gobroker-daemon/testing 0.0.4.3-1 all > X2Go Session Broker (standalone daemon) > > x2gobroker-loadchecker/testing 0.0.4.3-1 all > X2Go Session Broker (load checker service) > > x2gobroker-ssh/testing 0.0.4.3-1 amd64 > X2Go Session Broker (SSH broker) > > x2gobroker-ssh-dbgsym/testing 0.0.4.3-0x2go1+git20200426.1239+11.main.1 > amd64 debug symbols for x2gobroker-ssh > > x2gobroker-wsgi/testing 0.0.4.3-1 all > X2Go Session Broker (WSGI) > > x2goclient/testing 4.1.2.2-2 amd64 > X2Go Client application (Qt5) > > x2godesktopsharing/testing 3.2.0.0-2+b1 amd64 > Share X11 desktops with other users via X2Go > > x2goserver/testing 4.1.0.3-5 amd64 > X2Go Server > > x2goserver-common/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (common files) > > x2goserver-desktopsharing/testing 4.1.0.3-5 all > Share X11 desktops with other users via X2Go > > x2goserver-extensions/testing 4.1.0.3-5 all > X2Go Server (extension support) > > x2goserver-fmbindings/testing 4.1.0.3-5 all > X2Go Server (file manager bindings) > > x2goserver-printing/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (printing support) > > x2goserver-x2goagent/testing,now 4.1.0.3-5 amd64 [residual-config] > X2Go Server's X2Go Agent > > x2goserver-xsession/testing,now 4.1.0.3-5 all [residual-config] > X2Go Server (Xsession runner) > > x2gothinclient-cdmanager/testing 1.5.0.1-6 amd64 > clientside daemon enabling automatic CD-Rom mounting > > x2gothinclient-cdmanager-dbgsym/testing > 1.5.0.1-0x2go2+git20191129.725+11.main.1 amd64 debug symbols for > x2gothinclient-cdmanager > > x2gothinclient-chroot/testing 1.5.0.1-6 all > Install X2Go Thin Client chroot (metapackage) > > x2gothinclient-common/testing 1.5.0.1-6 all > X2Go thin client environment (common files) > > x2gothinclient-displaymanager/testing 1.5.0.1-6 all > login daemon starting x2goclient in displaymanager mode > > x2gothinclient-management/testing 1.5.0.1-6 all > Management tools for X2Go Thin Client chroot server > > x2gothinclient-minidesktop/testing 1.5.0.1-6 all > Minimal desktop for X2Go Thin Client chroot (based on MATE) > > x2gothinclient-smartcardrules/testing 1.5.0.1-6 all > UDEV rules for smartcard readers > > x2gothinclient-usbmount/testing 1.5.0.1-6 all > clientside usb mass-storage device mounting > > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# aptitude show x2goserver > Package: x2goserver > Version: 4.1.0.3-5 > State: not installed > Priority: optional > Section: x11 > Maintainer: Debian Remote Maintainers <debian-remote(a)lists.debian.org> > Architecture: amd64 > Uncompressed Size: 468 k > Depends: bc, libfile-basedir-perl, libfile-which-perl, libswitch-perl, > libtry-tiny-perl, libx2go-server-perl (< 4.1.0.3-5.1~), > libx2go-server-perl (>= 4.1.0.3-5), lsb-base, lsof, net-tools, > openssh-client, openssh-server, perl, psmisc, pwgen, x2goserver-common (< > 4.1.0.3-5.1~), x2goserver-common (>= 4.1.0.3-5), x2goserver-x2goagent (< > 4.1.0.3-5.1~), x2goserver-x2goagent (>= 4.1.0.3-5), xauth, xkb-data, > debconf (>= 0.5) | debconf-2.0 PreDepends: init-system-helpers (>= 1.54~) > Recommends: fontconfig, sshfs, x11-apps, x11-session-utils, x11-utils, > x11-xfs-utils, x11-xkb-utils, x11-xserver-utils, > x2goserver-extensions (< 4.1.0.3-5.1~), x2goserver-extensions (>= > 4.1.0.3-5), x2goserver-fmbindings (< 4.1.0.3-5.1~), x2goserver-fmbindings > (>= 4.1.0.3-5), x2goserver-printing (< 4.1.0.3-5.1~), x2goserver-printing > (>= 4.1.0.3-5), x2goserver-xsession (< 4.1.0.3-5.1~), > x2goserver-xsession (>= 4.1.0.3-5), xfonts-base, xinit > Suggests: pulseaudio-utils, rdesktop > Breaks: x2godesktopsharing (< 3.1.1.2-0~), x2goserver-compat (< 4.0.1.99~), > x2goserver-home, x2goserver-one, x2goserver-pyhoca (< 4.0.1.99~) > Replaces: x2goserver-compat, x2goserver-home, x2goserver-one, > x2goserver-pyhoca Description: X2Go Server > X2Go is a server based computing environment with > * session resuming > * low bandwidth support > * session brokerage support > * client-side mass storage mounting support > * client-side printing support > * audio support > * authentication by smartcard and USB stick > > This package contains the main daemon and tools for X2Go server-side > session administrations. > Homepage: http://wiki.x2go.org > > > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://security.debian.org/debian-security bullseye-security InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease > Hit:3 http://packages.x2go.org/debian bullseye InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# cat /etc/apt/preferences > Package: * > Pin: origin "packages.x2go.org/debian" > Pin-Priority: 880 > root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://deb.debian.org/debian bullseye InRelease > Hit:2 http://security.debian.org/debian-security bullseye-security InRelease > Hit:3 http://packages.x2go.org/debian bullseye InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# apt versions x2goserver > E: Invalid operation versions > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# man apt_preferences > root@bulls-eye:~# nano /etc/apt/preferences > root@bulls-eye:~# apt update > Hit:1 http://packages.x2go.org/debian bullseye InRelease > Hit:2 http://deb.debian.org/debian bullseye InRelease > Hit:3 http://security.debian.org/debian-security bullseye-security InRelease > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# nano /etc/apt/sources.list > root@bulls-eye:~# apt-update > -bash: apt-update: command not found > root@bulls-eye:~# apt update > Hit:1 http://deb.debian.org/debian bullseye InRelease > Hit:2 http://security.debian.org/debian-security bullseye-security InRelease > Get:3 http://packages.x2go.org/debian testing InRelease [31.2 kB] > Get:4 http://packages.x2go.org/debian testing/main amd64 Packages [12.6 kB] > Fetched 43.8 kB in 1s (67.6 kB/s) > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > 25 packages can be upgraded. Run 'apt list --upgradable' to see them. > root@bulls-eye:~# aptitude versions x2goserver > p 4.1.0.3-5 > testing 500 root@bulls-eye:~# - -----BEGIN PGP SIGNATURE----- iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCYEyGYAAKCRDn6sEfJS3n C3GBAKC1VTnPej9c6tLacav8u9hyM1RMJQCgicKHCYD0akXi6l8nUnpCOBYypfA= =qtoY - -----END PGP SIGNATURE----- -----BEGIN PGP SIGNATURE----- iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCYEyHJgAKCRDn6sEfJS3n C9pvAJ0U5HydF9lO7xzB0+9CBrO/4C5TtwCgs5ZTU1gt/XHfK+iUEW83rg7qQkU= =ZUGF -----END PGP SIGNATURE-----

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user March 2021