x2go-user December 2013

x2go-user@lists.x2go.org

21 participants
28 discussions

Session Resume through X2gobroker with SSH Proxy
by Mathias Ewald 08 Dec '13

08 Dec '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I set up x2gobroker with SSH proxy with passwordless authentication (auth on broker and proxy, not auth at x2goserver). Now I want to get the session resuming fixed. Everytime I connect, I get one additional session while disconnecting results in a suspended session. After a couple of days, my x2goserver runs out of memory and therefore becomes very slow. #### # x2gobroker.conf #### root@access:/etc/x2go# cat x2gobroker.conf | grep -v -E "^\s*#" | grep - -v -E "^\s*$" [global] ignore-primary-group-memberships = false [zeroconf] [inifile] enable = true root@access:/etc/x2go# #### # x2gobroker-sessionprofiles.conf #### [DEFAULT] setsessiontitle=true krblogin=false pack=16m-jpeg quality=9 speed=2 usesshproxy=true sshproxytype=SSH sshproxyhost=access.vxlt.net sshproxyport=22 sshproxyautologin=false sshproxysamepass=false sshproxysameuser=false width=800 height=600 dpi=96 fullscreen=false maxdim=false multidisp=true xinerama=false usekbd=true sound=false soundtunnel=false defsndport=false soundsystem=pulse startsoundsystem=false useexports=false useiconv=false iconvform=UTF-8 iconvto=UTF-8 fstunnel=false print=false usemimebox=false mimeboxaction=OPEN autostart=true xdmcpserver=localhost command=XFCE4 published=false command=XFCE acl-groups-deny=ALL acl-clients-allow=ALL acl-any-order=deny-allow sshproxysameuser=false sshproxyuser=x2gosshproxy user= [termsrv] host=10.173.20.2 name=Terminal Server published=false acl-groups-allow=vxltadmins broker-session-autologin=true #### # X2Go Server (termsrv) #### mathias@termsrv:~$ sudo dpkg -l | grep x2go [sudo] password for mathias: ii cups-x2go 3.0.1.0-0x2go1~git20131208.74+squeeze.heuler.1 all Virtual X2Go printer for CUPS ii libnx-x11 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 nx-X11 ii libx2go-log-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Log package ii libx2go-server-db-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Server:DB package ii libx2go-server-perl 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 Perl X2Go::Server package ii libxcomp3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX X compression library ii libxcompext3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX X11 protocol compression extensions library ii libxcompshad3 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX shadowing library ii nxagent 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX agent ii nxproxy 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 amd64 NX proxy ii pinentry-x2go 0.7.5.7-0x2go1~git20131129.49+squeeze.heuler.1 amd64 Qt4-based PIN or pass-phrase entry dialog for x2goclient ii python-x2go 0.4.0.8-0~1078~raring1 all Python module providing X2Go client API ii x2goagent 2:3.5.0.22-0x2go1~git20131207.439+squeeze.heuler.1 all X2Go agent ii x2gobroker-agent 0.0.3.0-0x2go1~git20131205.583+squeeze.heuler.1 amd64 X2Go http(s) based session broker (common files) ii x2gocdmanager 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 amd64 clientside daemon enabling automatic CD-Rom mounting ii x2goclient 4.0.1.2-0x2go2~git20131208.470+squeeze.heuler.1 amd64 X2Go Client application (Qt4) ii x2godesktopsharing 3.1.1.1-0x2go1~git20131129.109+squeeze.heuler.1 amd64 share X2go desktops with other users (via shadow sessions) ii x2goplugin 4.0.1.2-0x2go2~git20131208.470+squeeze.heuler.1 amd64 X2Go Client (Qt4) as browser plugin ii x2goserver 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 X2Go server daemon scripts ii x2goserver-common 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 amd64 X2Go Server (common files) ii x2goserver-extensions 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (extensions) ii x2goserver-fmbindings 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all Generic (freedesktop-based) file manager bindings for X2Go ii x2goserver-printing 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (printing) ii x2goserver-xsession 4.1.0.0-0~x2go1+squeeze~heuler~20130731~779~build1 all X2Go server daemon scripts (Xsession runner) ii x2gosmartcardrules 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 all UDEV rules for smartcard readers ii x2gousbmount 1.1.0.2-0x2go2~git20131129.482+squeeze.heuler.1 all clientside usb mass-storage device mounting mathias@termsrv:~$ As you can see, x2gobroker-agent is installed. #### # Logs on X2gobroker #### root@access:/var/log/x2gobroker# tail -n 0 -f authservice.log broker.log ==> authservice.log <== ==> broker.log <== 2013-12-08 13:50:57,167 - broker - INFO - X2Go Session Broker (0.0.3.0), 2013-12-08 13:50:57,168 - broker - INFO - written by Mike Gabriel (X2Go Project) <mike.gabriel(a)das-netzwerkteam.de> 2013-12-08 13:50:57,168 - broker - INFO - Setting up the broker's environment... 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_DEBUG: True 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_CONFIG: /etc/x2go/x2gobroker.conf 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_AGENT_CMD: /usr/lib/x2go/x2gobroker-agent 2013-12-08 13:50:57,169 - broker - INFO - X2GOBROKER_AUTHSERVICE_SOCKET: /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_DEFAULT_BACKEND: inifile 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_SSL_CERTFILE: 2013-12-08 13:50:57,170 - broker - INFO - X2GOBROKER_SSL_KEYFILE: 2013-12-08 13:50:57,180 - broker - INFO - client address is 127.0.0.1 2013-12-08 13:50:57,181 - broker - DEBUG - username: mathias, password: XXXXX, task: listsessions, profile_id: , cookie: 2013-12-08 13:50:57,181 - broker - DEBUG - base_broker.X2GoBroker.get_authentication_mechanism(): found default-auth-mech in global config section: pam 2013-12-08 13:50:57,182 - broker - DEBUG - base_broker.X2GoBroker._do_authenticate(): authenticating user=mathias with password=<hidden> against backend=inifile. 2013-12-08 13:50:57,182 - broker - DEBUG - connecting to authentication service socket /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:50:57,183 - broker - DEBUG - sending username=mathias, password=<hidden>, service=x2gobroker to authentication service 2013-12-08 13:50:57,198 - broker - INFO - authentication against PAM service »x2gobroker« succeeded for user »mathias« 2013-12-08 13:50:57,198 - broker - DEBUG - base_broker.X2GoBroker.check_access(): result of authentication check is: True 2013-12-08 13:50:57,205 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found broker-session-autologin in session profile with ID termsrv: true. This one has precendence over the default value. 2013-12-08 13:50:57,282 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,288 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,359 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,366 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,435 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,442 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,513 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,520 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,591 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,597 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,664 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,671 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,739 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,746 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,813 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,820 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,887 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,895 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:50:57,962 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none 2013-12-08 13:50:57,969 - broker - DEBUG - base_broker.X2GoBroker.get_session_autologin(): found default-session-autologin in global config section: False 2013-12-08 13:51:15,935 - broker - INFO - X2Go Session Broker (0.0.3.0), 2013-12-08 13:51:15,936 - broker - INFO - written by Mike Gabriel (X2Go Project) <mike.gabriel(a)das-netzwerkteam.de> 2013-12-08 13:51:15,937 - broker - INFO - Setting up the broker's environment... 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_DEBUG: True 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_CONFIG: /etc/x2go/x2gobroker.conf 2013-12-08 13:51:15,937 - broker - INFO - X2GOBROKER_AGENT_CMD: /usr/lib/x2go/x2gobroker-agent 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_AUTHSERVICE_SOCKET: /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_DEFAULT_BACKEND: inifile 2013-12-08 13:51:15,938 - broker - INFO - X2GOBROKER_SSL_CERTFILE: 2013-12-08 13:51:15,939 - broker - INFO - X2GOBROKER_SSL_KEYFILE: 2013-12-08 13:51:15,948 - broker - INFO - client address is 127.0.0.1 2013-12-08 13:51:15,949 - broker - DEBUG - username: mathias, password: XXXXX, task: selectsession, profile_id: termsrv, cookie: 2013-12-08 13:51:15,949 - broker - DEBUG - base_broker.X2GoBroker.get_authentication_mechanism(): found default-auth-mech in global config section: pam 2013-12-08 13:51:15,949 - broker - DEBUG - base_broker.X2GoBroker._do_authenticate(): authenticating user=mathias with password=<hidden> against backend=inifile. 2013-12-08 13:51:15,950 - broker - DEBUG - connecting to authentication service socket /run/x2gobroker/x2gobroker-authservice.socket 2013-12-08 13:51:15,950 - broker - DEBUG - sending username=mathias, password=<hidden>, service=x2gobroker to authentication service 2013-12-08 13:51:15,965 - broker - INFO - authentication against PAM service »x2gobroker« succeeded for user »mathias« 2013-12-08 13:51:15,965 - broker - DEBUG - base_broker.X2GoBroker.check_access(): result of authentication check is: True 2013-12-08 13:51:15,973 - broker - DEBUG - base_broker.X2GoBroker.get_agent_query_mode(): found default-agent-query-mode in global config section: none Need anything else? regards Mathias - -- Mathias Ewald - vXpertise WWW: www.vxpertise.net Landline: +49 911 495208940 Mobile: +49 151 17317864 Mail: mathias.ewald(a)vxpertise.net Skype: mathias.ewald ATTENTION: My email address mathias(a)mathias-ewald.de is no longer in use. Please send to mathias.ewald(a)vxpertise.net only! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSpLTnAAoJEA7RPiZyzgdIJrkP+QFMowIbI7zG1JOdnAxcas3m TqtNPdtmDR+v7qXxNWwKc1fOGepr585MZUf/iTmdLkxNZUyaK+4N/JS4UiqWft+r 4ZGswc5vHEpbERSoWCFqLNq8kVCblh1dxBarFCw87ZMf3zaw8moGEj7LJN9+FO9L VM9kqwLzY/Do0LDzlU3xYoGvXoFcgcb1gIcg4EPPiPFbozre9BNV0Hz7LgwIws4J kgWm/eEciyOMWfYbkpPxTtNdLig0Ks9DMLTxVUWiG1mJtgRtV8MRA/jd92m4ZQ0V zzwA09FxTYdY3L8wnlPtw/nUzn8vKLSahaMvNKxJO+8r3oy35PS81ZjiWxbvBVUt M0jlliq/S7Ir75L2keaBye+ZDQh2DzUztzM9mSl7DdRMio6wXPtW3F84uUdIzfqr y5FxJigklT5kaavZYCJtgYfeNKpnUc8ljsmkJI9FG+JOEOOmv4JGOwquAWDpJN0s 9TKB65ZNSnkk5zpANLTCCkIAAdwsB9r9VDm0nElttHwHZZM1m+0WYWKHjyDu5T8Q 65YA0NPon3u5SFjTFoyJ9o8RxfjMR1RCid/wIeRdtpOfLIodx/lRiyh+nGkQWRa5 idEBGy8b/DPSGXZLFNy7EZNKfum3Vvl2QzW/I+Ocaf81ZaW4hneYbgFk1fzL0OLM YPOgQC03zGvP7tismRc/ =rQsU -----END PGP SIGNATURE-----

1 0

Can't open display remotely or locally when using hostname in $DISPLAY
by Nick Ingegneri 06 Dec '13

06 Dec '13

Can anybody assist me with debugging what I am doing wrong in this case? I am running the X2Go client in Window 7 and the X2Go server on a RedHat 6 machine. I would like to have a remote linux host export the display back to the X2Go server, which would then forward it to the Windows 7 client. Starting a new X2Go session, this works on the local host: [user@localmachine ~]$ echo $DISPLAY :84 [user@localmachine ~]$ xhost + access control disabled, clients can connect from any host [user@localmachine ~]$ xclock # note - the xclock starts without problems But on a remote host, I found I could not connect to that display, even with "xhost +" already set: [user@remotemachine ~]$ setenv DISPLAY localmachine:84 [user@remotemachine ~]$ xclock Error: Can't open display: localmachine:84 [user@remotemachine ~]$ As an experiment, I tried setting the DISPLAY on localmachine to use the hostname, after which it could not connect to the display: user@localmachine ~]$ setenv DISPLAY localmachine:84 [user@localmachine ~]$ xclock Error: Can't open display: localmachine:84 [user@localmachine ~]$ xhost xhost: unable to open display "localmachine:84" I'm probably missing something obvious, but don't have any idea what is misconfigured. Thanks!

3 6

x2gocleansessions fix
by Gerald Richter - ECOS 06 Dec '13

06 Dec '13

Hi, x2gocleansessions sometimes fails for me, because there is a lot of extra output in the log like “Proxy: WARNING! Detected drift in system timer. Resetting to current time.”. The following patch fixes the problem: --- /usr/sbin/x2gocleansessions.orig 2013-12-06 06:37:46.000000000 +0100 +++ /usr/sbin/x2gocleansessions 2013-12-06 06:38:45.000000000 +0100 @@ -56,7 +56,7 @@ my $sess=shift; my $user=shift; my $log="/tmp/.x2go-${user}/session-C-${sess}.log"; - my $text=`tail -1 $log 2>/dev/null`; + my $text=`grep Session: $log 2>/dev/null|tail -1`; if ($text =~ m/Session suspended/) { return 0; Regards Gerald

1 0

Sudden problems with x2gobroker
by Short, Kermit 05 Dec '13

05 Dec '13

Greetings, I recently ran upates on our broker server, and after doing so, I can't get any client to display the session list. I get a "could not login" loop of death, and the following in the apache2 error log: [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2715): Target WSGI script '/usr/bin/ x2gobroker' cannot be loaded as Python module. [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2715): Exception occurred processing WSGI script '/usr/bin/x2gobroker'. [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] Traceback (most recent call last): [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/bin/x2gobroker", line 221, in <module > [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] prep_http_mode() [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/bin/x2gobroker", line 39, in prep_htt p_mode [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] import x2gobroker.web.extras [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] File "/usr/lib/python2.7/dist-packages/x2gobroke r/web/extras.py", line 34, in <module> [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] class X2GoBrokerItWorks(_RequestHandler): [Wed Dec 04 16:15:21 2013] [error] [client xxx.xxx.xxx.16] NameError: name '_RequestHandler' is not defined [Wed Dec 04 16:15:24 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2716): Target WSGI script '/usr/bin/ x2gobroker' cannot be loaded as Python module. [Wed Dec 04 16:15:24 2013] [error] [client xxx.xxx.xxx.16] mod_wsgi (pid=2716): Exception occurred processing WSGI script '/usr/bin/x2gobroker'. I believe I'm using the nightly build due to necessity, and I've got a presentation tomorrow on how well X2Go works. Anyone know what I can do to get this working again? -- Kermit Short DCS-5

2 2

x2goserver and recent GNOME Desktops
by Nikos Skalkotos 05 Dec '13

05 Dec '13

Hi all, Has anybody succeeded on connecting on a system that has a recent version of gnome (3.8 or 3.10)? I tried it in Ubuntu 13.10 and in Fedora 19 and Fedora 20 prerealese. For Ubuntu 13.10 I've used the x2go* packages found in launchpad and for Fedora 19 and 20 the official packages. In Ubuntu there is a gnome-fallback.session file that is link to gnome-flashback.session and there is a gnome-fallback-compiz.session that is link to gnome-flashback-compiz.session The first one uses metacity and should work with x2go and the latter uses compiz, so it probably needs 3d support. If I try to do: gnome-session --session gnome-fallback or gnome-session --session gnome-flashback I get a black screen and in the ~/.xsession-x2go-errors I see lines like this: Script for cjkv started at run_im. Script for default started at run_im. Script for cjkv started at run_im. Script for default started at run_im. gnome-session-is-accelerated: No composite extension. gnome-session-check-accelerated: Helper exited with code 256 gnome-session-is-accelerated: No composite extension. gnome-session-check-accelerated: Helper exited with code 256 There are complains that the fallback desktop in 13.10 requires 3d acceleration: http://askubuntu.com/questions/361617/does-gnome-fallback-desktop-require-a… The required componets for "GNOME Flashback (No effects)" are these: RequiredComponents=gnome-panel;gnome-settings-daemon;gnome-screensaver;metacity; If I create a script in /usr/local/bin: user@ubuntu-desktop:/usr/local/bin$ cat startmyubuntu #!/bin/bash gnome-panel& gnome-settings-daemon& gnome-screensaver& metacity And try to run it in the x2go command I manage to pop-up a crippled desktop but I don't think this is the way to go. In Fedora things are even worse. The available gnome sessions are gnome and gnome-classic and both seem to depend on mutter. This command ends up in black screen: gnome-session --session gnome-classic The required components for gnome classic are: RequiredComponents=gnome-shell-classic;gnome-settings-daemon;nautilus-classic; I have manually installed metacity and tried to execute a script that loaded the required components [root@localhost bin]# cat startmyubuntu #!/bin/bash /usr/bin/gnome-shell --mode=classic & /usr/libexec/gnome-settings-daemon-localeexec & nautilus --no-default-window --force-desktop & metacity & wait But the desktop is even more crippled. Is GNOME still supported by x2go or should we consider it abandoned like we did with Unity when Unity2d was dropped? Nikos

1 0

x2go session is the wrong dimensions
by Roderick Johnstone 02 Dec '13

02 Dec '13

Hi Sometimes when starting an x2go session (KDE as it happens) I find that the session is created with dimensions 1920x1200 whereas my client window is eg 800x600. I therefore only get to interact with a small part of the remote desktop. Come someone say please: 1) Why does this happen? 2) How can I prevent it happening? 2) How can I resize the session to match the client window size. Thanks Roderick Johnstone

2 1

distributing user settings
by Carl 02 Dec '13

02 Dec '13

Hello, I have recently setup a multi user x2go server, and I think it works great. I've got one issue though, that I would like to ask for help with or ideas about: When creating a session in the client, there's a lot of settings to fill out, so to tell a user how to set their client up I need to send a fairly long email, and it doesn't seem as easy to the user as it is once they are set up. With NX, I could copy a session settings file onto a CD along with the client software, tell the user to install the software and double click on the session file to login. They were then prompted only for username and password in a simple dialogue, and this was no bother at all to the user. (this was before NX4 was released with a very complicated user interface) I'd like to do something similar - find a way to make sure the user doesn't have to set colours and image format, click fullscreen, click to enable audio, set the link speed etc. And I want it to work both for Windows and Linux users. I've seen there's some other client software for x2go that I haven't tried, and maybe that's the solution - I will try shortly. Any ideas would be much appreciated. Thanks :-) Best Regards, Carl

3 2

Setting keyboard mapping in KDE sessions
by Roderick Johnstone 01 Dec '13

01 Dec '13

Hi As far as I can see, the x2go client keyboard settings are not respected when starting a KDE session on the server because KDE overrides these with its own settings. For our NX server server I was able to override the KDE settings by setting UserScriptAfterSessionStart in node.cfg to reference a script that parsed the NX session keyboard file and constructed the appropriate setxkbmap command. Is there an equivalent to the UserScriptAfterSessionStart functionality for the x2go server? Thanks Roderick Johnstone

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user December 2013