x2go-user May 2011

x2go-user@lists.x2go.org

10 participants
17 discussions

Re: [X2go-user] X2go-user Digest, Vol 9, Issue 15
by brian mullan 28 May '11

28 May '11

John I've done this quite a bit and have not seen this problem x2go client on ubuntu --(a)--- AWS EC2 Ubuntu desktop ---(b)--- AWS EC2 Windows 2003 serverl - link (a) is 15 Mbs cable connection - link (b) is 10Gbps ethernet A few thoughts I'd have are: - is only RDP affected? - From x2go client can you log into the x2go server and do an extended PING (say 20 iterations or so) to the Windows Server to see if PING's response time is changing? - are you sure there are no network issues on the link btwn the x2go server to the windows server? as it sounds like the VPN test went directly to the Windows server leaving out the link between the x2go server and Windows Server - Are you able to log directly into the x2go server ...not using x2go ... and run rdesktop directly to the window server just to see if RDP is having a problem over that link? Brian > ---------- Forwarded message ---------- > From: "John A. Sullivan III" <jsullivan(a)opensourcedevel.com> > To: x2go-user(a)lists.berlios.de > Date: Fri, 27 May 2011 15:49:50 -0400 > Subject: [X2go-user] Performance issues using RDP > Hello, all. We were very eager to experiment with TSPlus > (http://www.tsplus.net) as an alternative to Microsoft RDS. We have > been assuming all along that performance of any RDP solution is better > in a low bandwidth WAN environment if we put X2Go in the middle of it > and run rdesktop from the X2Go Server to a local Windows server. Our > results were very disappointing with both TSPlus and RDS and with both > rdesktop and xfreerdp. > > Has anyone else experienced the same poor performance or, more > importantly, has anyone worked around it? > > We noticed that screens seemed to be painting line by line - not sure if > if it is the entire screen or just the active window. It also made > mouse movements very erratic in TSPlus + rdesktop. TSPlus + xfreerdp > seems better. > > To demonstrate this, I opened notepad in a large window in a full screen > session, typed an entire line, copied it to the clipboard and then held > down <CTL>V to paste it. The first few lines flew but then it became > very slow and we could see the flicker of each line painting. > > I also opened Internet Explorer and went to www.spiritualoutreach.org - > a very poorly designed site I put up years ago with long pages and far > too large graphics. I sat and watched the screen paint a band at a > time. I opened one of the large template documents and vertical > scrolling was nearly impossible. > > I'll paste in some of our internal notes below. Thanks - John > > > >

3 2

Performance issues using RDP
by John A. Sullivan III 28 May '11

28 May '11

Hello, all. We were very eager to experiment with TSPlus (http://www.tsplus.net) as an alternative to Microsoft RDS. We have been assuming all along that performance of any RDP solution is better in a low bandwidth WAN environment if we put X2Go in the middle of it and run rdesktop from the X2Go Server to a local Windows server. Our results were very disappointing with both TSPlus and RDS and with both rdesktop and xfreerdp. Has anyone else experienced the same poor performance or, more importantly, has anyone worked around it? We noticed that screens seemed to be painting line by line - not sure if if it is the entire screen or just the active window. It also made mouse movements very erratic in TSPlus + rdesktop. TSPlus + xfreerdp seems better. To demonstrate this, I opened notepad in a large window in a full screen session, typed an entire line, copied it to the clipboard and then held down <CTL>V to paste it. The first few lines flew but then it became very slow and we could see the flicker of each line painting. I also opened Internet Explorer and went to www.spiritualoutreach.org - a very poorly designed site I put up years ago with long pages and far too large graphics. I sat and watched the screen paint a band at a time. I opened one of the large template documents and vertical scrolling was nearly impossible. I'll paste in some of our internal notes below. Thanks - John BEGIN NOTES Good afternoon, Phil. I've dropped an unexpected several hours into this this morning with some good, some bad news, and some inconclusive news. There is an alternative to rdesktop named freerdp which aims to implement the newer protocols as rdesktop is barely being developed. Last I used it, it was very lacking but I installed the current Squeeze version on my netbook and connected to windesk01 across the VPN (xfreerdp -d mydomain -u myid -a 32 -x lan -f --plugin cliprdr tsplusserver ). The results were stunning. Performance was quite usable directly through the VPN, i.e, not using X2Go as an intermediary. The silly test I was using to see the line by line painting (opening a large notepad, typing a full line, copying it to the clipboard, and then holding down <CTL>V to continually paste it) worked quite well. I did the same thing to RDSServer where I had some large architectural drawing stashed and they scrolled largely seamlessly. I then returned to my VD, installed freerdp-x11, and tried the same. The results were most disappointing - the same problems of slow, line by line painting. I also noticed that the full screen toggle (<ALT><CTL><ENTER>) mangled whereas directly on the VPN, it did not. I wonder of there is some sort of conflict between the way NX and RDP paint the screen? I then tried the same thing using simply rdesktop. The performance over the VPN was better than I remembered. I also contrasted RDSServer and tsplusserver. I'm not sure but it is possible that TSPlus is actually getting heat for something they are doing well. The line by line screen painting in my notepad test was much more noticeable in TSPlus but the overall performance was about the same. I wonder if TSPlus is painting the screen faster and so we see the repaints whereas RDS is hiding them by not updating the screen as quickly. I don't know - just a thought. I'm continuing to play around with this quite a bit. In fact the above paragraph was typed from a direct full screen Windows desktop via X2Go. This paragraph is being typed across the VPN directly on tsplusserver using xfreerdp. The keyboard response seems about the same. For kicks, I opened KWrite on my Trinity desktop and tried the same pasting test to see if the screen painting was line by line. It was not; it flew. So it is something in the interaction between RDP and NX. To create the X2Go direct Windows session, create new sessions (one for tsplusserver and the other for RDSServer). The type should be Custom Desktop (NOT single application) with the command line as described above). Remember to set the compression type to 16m-png-jpeg and the display DPI. I'll be very curious to see what you see. END NOTES

2 1

Re: [X2go-user] x2go thinclient - custom xorg.conf
by Stefan 24 May '11

24 May '11

Am Dienstag, 24. Mai 2011 schrieb siziwi: > Hi, > Have you ever thought about / looked at thinstation > (http://www.thinstation.org/)? As far as I know, it is possible to load > different configurations, settings and drivers for different machines > booting on PXE (for sure, you can "filter" by IP- and MAC-address). This > mechanism may possibly adapted to your system. > Maybe I have misunderstood you and this info is obsolete... > Kind regards > Simon Hi, yes I tried thinstation a while ago but only the live-cd. And my experiences with hardware detection where not the best (e.g. monitor resolution). Maybe it improved in the last time. But thinstation doesn't provide a x2go-client. Does it? cheers Stefan > Stefan schrieb: > > Hi Neil, > > > > thanks for answering. This is indeed a option. Since I got very good > > experiences with the live-helper tools from debian > > (http://live.debian.net/) this would be a possibility to create the > > live-cd-image even easier and more reproducable. > > > > Bevor I've seen the x2gothinclient-environment I was already thinking to > > make a pxe-bootable live-image with x2go-fullscreen-client this way. > > > > It's also available for ubuntu - but I've never tried. It shouldn't be > > more difficult than with pure debian > > (http://packages.ubuntu.com/de/hardy/live-helper) > > > > But if possible I would prefer a generic debian solution. > > > > So far I see x possibilities > > > > 1. hacking the x2gothinclientd script > > 2. building live-cd image (ubuntu) > > 3. setting up a special thinclient changeroot for each client which needs > > special configuration (with hard-links for all unchanged files) and > > booting with mac-specific pxe > > > > Since I've got already the custom xorg.conf for the clients which behave > > not like they should, I'll start with 1. > > > > For second way it would be great to use the live-helper script and to > > publish all configuration in the wiki. I'll do, if I find the time. > > > > The first way quick and dirty without changing the x2gothinclientd: > > > > I created a script > > /etc/init.d/x2go_xorg_custom > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > #!/bin/bash > > # Workaround for custom xorg.conf > > # tests if custom xorg.conf for mac-address exists. > > # if yes copy to /ramdrive/tmp > > # if no the default xorg.conf.default kopiert > > # ein symbolixher Link /etc/X11/xorg.conf verweist auf diese Datei > > > > # make shure having always the same output of ifconfig: > > export LANG=C > > > > # getting Mac-Address for the eth0 -> has to be adjusted if the interface > > # isn't always eth0 > > xorg_file="xorg.conf.$(/sbin/ifconfig eth0|grep HWaddr | awk '{print > > $5}')" > > > > # tests if a custom xorg.conf.MACADRESS exists > > > > if test -e /etc/X11/$xorg_file; then > > echo $xorg_file; > > else > > xorg_file="xorg.conf.default" > > # echo $xorg_file > > fi > > > > # copiing the specific xorg.conf to ramdrive > > cp /etc/X11/$xorg_file /ramdrive/tmp/xorg.conf > > > > exit 0 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > in the changeroot I made a link from the xorg.conf to the new one > > and add a starting-script before the x2gothinclientd > > > > chroot /opt/x2gothinclient > > ln -s /ramdrive/tmp/xorg.conf /etc/X11/xorg.conf > > ln -s /etc/init.d/x2go_custom_xorg /etc/rc2.d/S19x2go_custom_xorg > > > > > > Thanks a lot. > > Stefan > > > > Am Dienstag, 24. Mai 2011 schrieb Neil Hunt: > >> Stefan, > >> > >> I tried long and hard to get the xorg.conf file to work with my monitors > >> to no avail. Debian simply did not have the intelligence to detect > >> various monitor configurations and I finally had to unfortunately give > >> up. > >> > >> Probably not the answer you want, however I can say that we went a > >> different route and it's worked just fine: we decided to create a custom > >> Ubuntu Live CD image and boot to that via PXE. Ubuntu picks up virtually > >> any monitor settings and audio works great as well over PXE. I created a > >> custom kiosk mode so a user boots up right to a full-screen x2go client, > >> just as the x2go-thinclient package did. The two links I used were > >> > >> https://help.ubuntu.com/community/LiveCDCustomization > >> > >> and for setting up the kiosk mode, I used this description (made for NX, > >> but just replace the NX settings with the x2go_gtk client and all worked > >> fine). http://blog.nistu.de/A_kiosk_setup_with_nxclient.html > >> > >> Let me know if you have any questions. > >> > >> Neil > >> > >>> ------------------------------ > >>> > >>> Message: 2 > >>> Date: Tue, 24 May 2011 00:59:55 +0200 > >>> From: "Stefan" <lists(a)nosolution.doesntexist.org> > >>> To: x2go-user(a)lists.berlios.de > >>> Subject: Re: [X2go-user] x2go thinclient - custom xorg.conf > >>> Message-ID: <201105240059.56128.lists(a)nosolution.doesntexist.org> > >>> Content-Type: text/plain; charset="iso-8859-1" > >>> > >>> Am Montag, 23. Mai 2011 schrieb Stefan: > >>>> Hi all, > >>>> > >>>> I installed recently x2go-one and the thinclient-netboot-environment. > >>>> So far all works fine. (Sound and printing not yet tested). > >>>> > >>>> At the same network we have also a ltsp installation but I think to > >>> > >>> replace > >>> > >>>> ist step by step with x2go mainly because of spee issues. > >>>> > >>>> One of the main questions I have ist if it's possible to offer custom > >>>> xorg.conf to the clients which boot via pxe. > >>>> > >>>> Some of our monitors are not correctly recognized by the x-server an > >>>> need > >>> > >>> a > >>> > >>>> special xorg.conf. > >>>> > >>>> In the ltsp changeroot there is the possibility to offer something > >>>> like xorg.conf.00:00:00:00:00 with mac-address as a suffix. > >>> > >>> I've confused this: is not in ltsp but in the pxe configuration ;-) > >>> In ltsp you define the specifics for each host in the lts.conf > >>> but maybe the client mac is still a good starting point. > >>> > >>> Stefan > >>> > >>> > >>> ------------------------------ > >>> > >>> _______________________________________________ > >>> X2go-user mailing list > >>> X2go-user(a)lists.berlios.de > >>> https://lists.berlios.de/mailman/listinfo/x2go-user > >>> > >>> > >>> End of X2go-user Digest, Vol 9, Issue 13 > >>> **************************************** > > > > _______________________________________________ > > X2go-user mailing list > > X2go-user(a)lists.berlios.de > > https://lists.berlios.de/mailman/listinfo/x2go-user

1 0

Re: [X2go-user] x2go thinclient - custom xorg.conf
by Neil Hunt 24 May '11

24 May '11

Stefan, I tried long and hard to get the xorg.conf file to work with my monitors to no avail. Debian simply did not have the intelligence to detect various monitor configurations and I finally had to unfortunately give up. Probably not the answer you want, however I can say that we went a different route and it's worked just fine: we decided to create a custom Ubuntu Live CD image and boot to that via PXE. Ubuntu picks up virtually any monitor settings and audio works great as well over PXE. I created a custom kiosk mode so a user boots up right to a full-screen x2go client, just as the x2go-thinclient package did. The two links I used were https://help.ubuntu.com/community/LiveCDCustomization and for setting up the kiosk mode, I used this description (made for NX, but just replace the NX settings with the x2go_gtk client and all worked fine). http://blog.nistu.de/A_kiosk_setup_with_nxclient.html Let me know if you have any questions. Neil > ------------------------------ > > Message: 2 > Date: Tue, 24 May 2011 00:59:55 +0200 > From: "Stefan" <lists(a)nosolution.doesntexist.org> > To: x2go-user(a)lists.berlios.de > Subject: Re: [X2go-user] x2go thinclient - custom xorg.conf > Message-ID: <201105240059.56128.lists(a)nosolution.doesntexist.org> > Content-Type: text/plain; charset="iso-8859-1" > > > Am Montag, 23. Mai 2011 schrieb Stefan: > > Hi all, > > > > I installed recently x2go-one and the thinclient-netboot-environment. So > > far all works fine. (Sound and printing not yet tested). > > > > At the same network we have also a ltsp installation but I think to > replace > > ist step by step with x2go mainly because of spee issues. > > > > One of the main questions I have ist if it's possible to offer custom > > xorg.conf to the clients which boot via pxe. > > > > Some of our monitors are not correctly recognized by the x-server an need > a > > special xorg.conf. > > > > In the ltsp changeroot there is the possibility to offer something like > > xorg.conf.00:00:00:00:00 with mac-address as a suffix. > > I've confused this: is not in ltsp but in the pxe configuration ;-) > In ltsp you define the specifics for each host in the lts.conf > but maybe the client mac is still a good starting point. > > Stefan > > > ------------------------------ > > _______________________________________________ > X2go-user mailing list > X2go-user(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/x2go-user > > > End of X2go-user Digest, Vol 9, Issue 13 > **************************************** >

3 2

Re: [X2go-user] x2go thinclient - custom xorg.conf
by Stefan 24 May '11

24 May '11

Hi Neil, thanks for answering. This is indeed a option. Since I got very good experiences with the live-helper tools from debian (http://live.debian.net/) this would be a possibility to create the live-cd-image even easier and more reproducable. Bevor I've seen the x2gothinclient-environment I was already thinking to make a pxe-bootable live-image with x2go-fullscreen-client this way. It's also available for ubuntu - but I've never tried. It shouldn't be more difficult than with pure debian (http://packages.ubuntu.com/de/hardy/live-helper) But if possible I would prefer a generic debian solution. So far I see x possibilities 1. hacking the x2gothinclientd script 2. building live-cd image (ubuntu) 3. setting up a special thinclient changeroot for each client which needs special configuration (with hard-links for all unchanged files) and booting with mac-specific pxe Since I've got already the custom xorg.conf for the clients which behave not like they should, I'll start with 1. For second way it would be great to use the live-helper script and to publish all configuration in the wiki. I'll do, if I find the time. The first way quick and dirty without changing the x2gothinclientd: I created a script /etc/init.d/x2go_xorg_custom ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #!/bin/bash # Workaround for custom xorg.conf # tests if custom xorg.conf for mac-address exists. # if yes copy to /ramdrive/tmp # if no the default xorg.conf.default kopiert # ein symbolixher Link /etc/X11/xorg.conf verweist auf diese Datei # make shure having always the same output of ifconfig: export LANG=C # getting Mac-Address for the eth0 -> has to be adjusted if the interface # isn't always eth0 xorg_file="xorg.conf.$(/sbin/ifconfig eth0|grep HWaddr | awk '{print $5}')" # tests if a custom xorg.conf.MACADRESS exists if test -e /etc/X11/$xorg_file; then echo $xorg_file; else xorg_file="xorg.conf.default" # echo $xorg_file fi # copiing the specific xorg.conf to ramdrive cp /etc/X11/$xorg_file /ramdrive/tmp/xorg.conf exit 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ in the changeroot I made a link from the xorg.conf to the new one and add a starting-script before the x2gothinclientd chroot /opt/x2gothinclient ln -s /ramdrive/tmp/xorg.conf /etc/X11/xorg.conf ln -s /etc/init.d/x2go_custom_xorg /etc/rc2.d/S19x2go_custom_xorg Thanks a lot. Stefan Am Dienstag, 24. Mai 2011 schrieb Neil Hunt: > Stefan, > > I tried long and hard to get the xorg.conf file to work with my monitors to > no avail. Debian simply did not have the intelligence to detect various > monitor configurations and I finally had to unfortunately give up. > > Probably not the answer you want, however I can say that we went a > different route and it's worked just fine: we decided to create a custom > Ubuntu Live CD image and boot to that via PXE. Ubuntu picks up virtually > any monitor settings and audio works great as well over PXE. I created a > custom kiosk mode so a user boots up right to a full-screen x2go client, > just as the x2go-thinclient package did. The two links I used were > > https://help.ubuntu.com/community/LiveCDCustomization > > and for setting up the kiosk mode, I used this description (made for NX, > but just replace the NX settings with the x2go_gtk client and all worked > fine). http://blog.nistu.de/A_kiosk_setup_with_nxclient.html > > Let me know if you have any questions. > > Neil > > > ------------------------------ > > > > Message: 2 > > Date: Tue, 24 May 2011 00:59:55 +0200 > > From: "Stefan" <lists(a)nosolution.doesntexist.org> > > To: x2go-user(a)lists.berlios.de > > Subject: Re: [X2go-user] x2go thinclient - custom xorg.conf > > Message-ID: <201105240059.56128.lists(a)nosolution.doesntexist.org> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Am Montag, 23. Mai 2011 schrieb Stefan: > > > Hi all, > > > > > > I installed recently x2go-one and the thinclient-netboot-environment. > > > So far all works fine. (Sound and printing not yet tested). > > > > > > At the same network we have also a ltsp installation but I think to > > > > replace > > > > > ist step by step with x2go mainly because of spee issues. > > > > > > One of the main questions I have ist if it's possible to offer custom > > > xorg.conf to the clients which boot via pxe. > > > > > > Some of our monitors are not correctly recognized by the x-server an > > > need > > > > a > > > > > special xorg.conf. > > > > > > In the ltsp changeroot there is the possibility to offer something like > > > xorg.conf.00:00:00:00:00 with mac-address as a suffix. > > > > I've confused this: is not in ltsp but in the pxe configuration ;-) > > In ltsp you define the specifics for each host in the lts.conf > > but maybe the client mac is still a good starting point. > > > > Stefan > > > > > > ------------------------------ > > > > _______________________________________________ > > X2go-user mailing list > > X2go-user(a)lists.berlios.de > > https://lists.berlios.de/mailman/listinfo/x2go-user > > > > > > End of X2go-user Digest, Vol 9, Issue 13 > > ****************************************

1 0

x2go thinclient - custom xorg.conf
by Stefan 23 May '11

23 May '11

Hi all, I installed recently x2go-one and the thinclient-netboot-environment. So far all works fine. (Sound and printing not yet tested). At the same network we have also a ltsp installation but I think to replace ist step by step with x2go mainly because of spee issues. One of the main questions I have ist if it's possible to offer custom xorg.conf to the clients which boot via pxe. Some of our monitors are not correctly recognized by the x-server an need a special xorg.conf. In the ltsp changeroot there is the possibility to offer something like xorg.conf.00:00:00:00:00 with mac-address as a suffix. Is there any similar possibility on the x2go thinclient system? If not yet: It should be possible to make some adjustments in the startscript. I would try to make a hack in the /usr/sbin/x2gothinclientd to ask for mac-address to choose a custom Xorg.conf. But maybe there is already a solution? I think it would make sense to change the x2gothinclientd script in this way. Best regards Stefan

1 1

Re: [X2go-user] Ubuntu 10.04 only black screen
by Vadim Bulst 20 May '11

20 May '11

Hi Mike, thanks for Your quick answer. Yes, I'm using SQLite : cat /etc/x2go/x2gosql/sql #postgres or sqlite backend=sqlite (a) root@cln05:~# ls -la /usr/bin/x2gosqlitewrapper -rwsr-sr-x 1 x2gouser x2gousers 9020 2011-05-04 14:47 /usr/bin/x2gosqlitewrapper (b) root@cln05:~# getent passwd x2gouser x2gouser:x:119:128::/var/lib/x2go:/bin/false (c) root@cln05:~# ls -al /var/lib/x2go/ insgesamt 24 drwx------ 2 x2gouser x2gouser 4096 2011-05-19 10:38 . drwxr-xr-x 80 root root 4096 2011-05-18 13:12 .. -rw------- 1 x2gouser x2gouser 13312 2011-05-19 10:38 x2go_sessions Greets, Vadim -- Mit freundlichen Grüßen Vadim Bulst Systemadministrator BBZ Biotechnologisch-Biomedizinisches Zentrum Universität Leipzig Deutscher Platz 5, 04103 Leipzig Tel.: 0341 97 - 31 307 Fax : 0341 97 - 31 309

3 5

Ubuntu 10.04 only black screen
by Tobias Dinse 19 May '11

19 May '11

Hi all, today i have installed the x2go-server on our virtual Ubuntu 10.04 Server maschine. I have also installed Ubuntu-Desktop (gnome).After adding a new User to the Group x2gousers I tried to Connect to the x2go-server. I Can Login but I get only a black Screen. I selected Gnome as Desktop on the x2go-client. Client Log: NXPROXY - Version 3.4.0 Copyright (C) 2001, 2010 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '2807'. Session: Starting session at 'Thu May 19 09:32:24 2011'. Info: Connecting to remote host 'localhost:30040'. Info: Connection to remote proxy 'localhost:30040' established. Info: Connection with remote proxy completed. Warning: Unrecognized session type 'unix-kde-depth_24'. Assuming agent session. Info: Using LAN link parameters 1536/24/1/0. Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_24'. Info: Not using NX delta compression. Info: Not using ZLIB data compression. Info: Not using ZLIB stream compression. Info: Not using a persistent cache. Info: Forwarding X11 connections to display ':0.0'. Session: Session started at 'Thu May 19 09:32:25 2011'. Info: Established X server connection. Info: Using shared memory parameters 1/2048K. Any Idea? Thanks & regards Tobias

3 4

x2goserver-one, x2goserver-home
by Mike Gabriel 19 May '11

19 May '11

Hi all, as many many people ask about x2goserver-one, x2goserver-home I have added an article to our FAQ section on that: http://wiki.x2go.org/faq?&#what_are_the_packages_x2goserver-home_and_x2gose… Summary: both packages are obsolete!!! Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

X2go stable ppa on Ubuntu Launchpad
by Mike Gabriel 18 May '11

18 May '11

Hi List, A couple of hours ago we have set up a stable ppa for X2go on Ubuntu Launchpad. From our nightly-builds we will pick packages that appear rather stable/successfull/blessed and copy them to the following ppa at Launchpad: ppa:x2go/stable @Ubuntu users: please use this ppa for setting up your systems. Further info can be obtained from the X2go wiki. http://wiki.x2go.org/adding_the_x2go_repository_ubuntu People still using the nightly-builds from ppa:x2go/ppa are on their own from now on... Those packages might be broken from time to time. Please change over to ppa:x2go/stable. Thanks+Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, dorfstr. 27, 24245 barmissen fon: +49 (4302) 281418, fax: +49 (4302) 281419 GnuPG Key ID 0xB588399B mail: mike.gabriel(a)das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.x…

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

x2go-user May 2011