Same problem, latest version (4.0.1.0) don't start on mac os X 10.6.8
Date/Time: 2013-05-27 09:36:22.476 +0200 OS Version: Mac OS X 10.6.8 (10K549) Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0xfffffffffffffff8 Crashed Thread: Unknown
Backtrace not available
Unknown thread crashed with X86 Thread State (64-bit): rax: 0x0000000000000055 rbx: 0x0000000000000000 rcx: 0x0000000000000000 rdx: 0x0000000000000000 rdi: 0x0000000000000000 rsi: 0x0000000000000000 rbp: 0x0000000000000000 rsp: 0x0000000000000000 r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000000000000 r11: 0x0000000000000000 r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000 rip: 0x00007fff5fc01028 rfl: 0x0000000000010203 cr2: 0xfffffffffffffff8
Binary images description not available
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 18 GB, SMC 1.25f4 Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.42.4) Modem: Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports Network Service: Ethernet 1, Ethernet, en0 PCI Card: ATI Radeon HD 5870, sppci_displaycontroller, Slot-1 PCI Card: ATI Radeon HD 5870, ATY,LangurParent, Slot-1 Serial ATA Device: SAMSUNG HD103UJ, 931,51 GB Serial ATA Device: SAMSUNG HD103SJ, 931,51 GB Serial ATA Device: SAMSUNG HD753LJ, 698,64 GB Serial ATA Device: WDC WD2002FAEX-007BA0, 1,82 TB Parallel ATA Device: TSSTcorp CDDVDW SH-S202J USB Device: Hub, 0x05ac (Apple Inc.), 0x1008, 0xfd500000 / 3 USB Device: Hub, 0x05ac (Apple Inc.), 0x911c, 0xfd510000 / 5 USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd513000 / 8 USB Device: CTH-661, 0x056a (WACOM Co., Ltd.), 0x00d3, 0xfd513100 / 13 USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd513200 / 12 USB Device: Hub, 0x2001 (D-Link Corporation), 0xf103, 0xfd511000 / 7 USB Device: iPhone, 0x05ac (Apple Inc.), 0x1297, 0xfd511300 / 14 USB Device: USB Storage, 0x05e3 (Genesys Logic, Inc.), 0x070e, 0xfd511200 / 11 USB Device: Free-1 USB Phone, 0x1778, 0x0403, 0xfd511600 / 10 USB Device: Alienware TactX Mouse, 0x187c, 0x0515, 0xfd511400 / 9 USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921c, 0xfd512000 / 6 USB Device: Hub, 0x05ac (Apple Inc.), 0x1008, 0xfd300000 / 2 USB Device: Smart-UPS 2200 FW:COM 02.1 / UPS.05.I, 0x051d (American Power Conversion), 0x0003, 0xfd310000 / 4 USB Device: Apple USB Modem, 0x05ac (Apple Inc.), 0x1401, 0x3d200000 / 2 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000 / 2 FireWire Device: built-in_hub, Up to 800 Mb/sec FireWire Device: unknown_device, Unknown
This is a known problem. I build the Mac binary packages but don't have access to any system older than 10.8. All the libraries I use to build x2goclient are built for 10.8 and I have no easy way of rebuilding them with a deployment target of 10.6, or against a 10.6 SDK (especially because there only is a 10.7 SDK available in Xcode for 10.8).
Please get the necessary dependencies and use macbuild.sh in the source tree to build a binary for 10.6 and/or 10.7, if you can. I'm sure this binary could be published instead of mine for 10.8.
If you use MacPorts, you should be able to get a working x2goclient by installing the x2goclient port from MacPorts.
-- Clemens Lang MacPorts Developer
Am 29.05.2013 19:43, schrieb Clemens Lang:
This is a known problem. I build the Mac binary packages but don't have access to any system older than 10.8. All the libraries I use to build x2goclient are built for 10.8 and I have no easy way of rebuilding them with a deployment target of 10.6, or against a 10.6 SDK (especially because there only is a 10.7 SDK available in Xcode for 10.8).
Please get the necessary dependencies and use macbuild.sh in the source tree to build a binary for 10.6 and/or 10.7, if you can. I'm sure this binary could be published instead of mine for 10.8.
My company (BAUR-ITCS UG) offers a free ssh/VNC access to a 10.6/10.7 dual-boot Mac mini for X2Go developers. Contact me off-list for details.
Mihai Moldovan (ionic@ionic.de) used to use it, but it ssems he's currently focused on other topics than X2Go.
Kind Regards, Stefan Baur
-- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243
-
Clemens Lang -
Nero -
Stefan Baur